MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
8,543 Commits 1 Branch 0 Tags 96 MiB
b0e282a74b
Commit Graph

7059 Commits

Author SHA1 Message Date
Scott Lahteine
b0e282a74b Cleanups for SD_REPRINT_LAST_SELECTED_FILE 2017-10-29 19:02:17 -05:00
Scott Lahteine
daa85f71e1
Merge pull request #8123 from thinkyhead/bf1_dual_xyz_endstops 
[1.1.x] Dual endstops XYZ
 2017-10-29 04:36:09 -05:00
Rowan Meara
9850ba0cbd [1.1.x] Fix M303 thermal protection #8103 (#8126) 
* Fixed M303 thermal protection

The temperature sanity checking logic was not being applied during M303
(pid autotuning) because instead of setting a target temperature, it
directly manipulated the pwm values.  When PIDTEMP/PIDTEMPBED is
enabled, PWM values rather than the target temperature determine whether
the heater is on.  I changed this to look directly at the PWM amount
when pid is enabled.

* Turn off heaters on M303 error

Currently, PID autotuning stops if it overshoots the temperature by 20C
or if if the temperature does not change for 20 minutes and it times
out.  I added calls to disable the heaters in these scenarios.

* Removed unnecessary if statement.

Added changes suggested by GMagician.

* Update temperature.cpp

* Update temperature.cpp

* Update temperature.cpp
 2017-10-29 04:34:47 -05:00
Scott Lahteine
318c419f77 Implement support for Dual X and Y endstops 2017-10-29 03:49:45 -05:00
Scott Lahteine
7e1232269a Add Dual Steppers / Endstops to configs 2017-10-29 03:49:45 -05:00
Scott Lahteine
62d52d62dc Cleanup for DIGIPOTS settings 2017-10-29 03:49:32 -05:00
LVD-AC
77cf42588f (1.1.x) serious bug G33 2017-10-29 00:22:55 +02:00
Scott Lahteine
a979c428ee Revert default BABYSTEP_MULTIPLICATOR to 1 2017-10-27 19:42:51 -05:00
jmdearras
6920769a9a Added MKS GEN L board (#8088) 
[1.1.x] Add MKS GEN L board
 2017-10-27 02:13:41 -05:00
Scott Lahteine
410aa0716d Concise SD_REPRINT_LAST_SELECTED_FILE description 2017-10-27 00:10:04 -05:00
Scott Lahteine
445a7f65cd Clean up trailing whitespace 2017-10-27 00:02:35 -05:00
Luc Van Daele
e64cfb13b8 (1.1.x) auto tune calibration parameters (#8031) 
* auto tune calibration parameters

* solve warnings

* Tweaks to formatting

* review Thinkyhead

* Error
 2017-10-26 23:49:20 -05:00
Scott Lahteine
2296d98845 Tweak neopixel self-test 2017-10-26 22:46:11 -05:00
Scott Lahteine
9aac3d8773 Add some Polish translations 
Thanks @SCiunczyk
 2017-10-26 22:44:23 -05:00
Scott Lahteine
6569b9ba56 Fix FWRETRACT logic, apply common sense 2017-10-26 22:36:41 -05:00
Bob-the-Kuhn
7ab9abe4ef Merge pull request #8107 from Bob-the-Kuhn/1.1.x-reduced-font-fix 
(bug fix) 1.1.x - save 1400 bytes of FLASH by using reduced font for some languages
 2017-10-26 16:09:52 -05:00
Bob-the-Kuhn
3357170b18 give this language an unique name 2017-10-26 15:48:00 -05:00
Roxy-3D
2e746f2b8b Initial conflict resolution of SD_REPRINT_LAST_SELECTED_FILE (#8104) 
* Initial conflict resolution

All previous items resolved:
- Use of ELAPSED() on timer code
- Switch to use of defer_return_to_status=true as much as possible
- Update & Clean Up of Max7219 routines

* Resolve non-SD case in ultralcd.cpp
 2017-10-26 11:44:55 -05:00
Bob-the-Kuhn
594c075377 1.1.x - save 1400 bytes of FLASH by using reduced font for some languages (#8095) 
* use reduced sized font for some languages

* Fit Portuguese language files to existing scheme

* Rename language_pl-DOGM.h to language_pl_utf8.h

* Rename language_pl_utf8.h to language_pl-DOGM.h

* Update dogm_font_data_ISO10646_1.h

* Update dogm_font_data_ISO10646_1.h
 2017-10-25 18:32:38 -05:00
Scott Lahteine
8bb1e91afd More specific M100 description 2017-10-25 16:11:09 -05:00
Scott Lahteine
a12d1b21b5 Merge pull request #8048 from madmo/mks-mini-gt2560 
[1.1.x] Add MKS MINI 12864 support to GT2560
 2017-10-25 01:13:07 -05:00
Scott Lahteine
5bed2f351a Fix spacing, use single instances of similar pins 2017-10-24 19:12:40 -05:00
Scott Lahteine
ec9d7b639d Encourage users to re-examine their configs 2017-10-24 18:33:31 -05:00
Scott Lahteine
1c97c1582c Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h 2017-10-24 18:25:50 -05:00
Scott Lahteine
f06f4b40b8 Apply physical limits to mesh bounds 2017-10-24 16:49:00 -05:00
Scott Lahteine
3235beef6d Merge pull request #8073 from thinkyhead/bf1_fix_M600 
[1.1.x] Fix position sync in M600 pause/resume
 2017-10-24 14:56:01 -05:00
Scott Lahteine
e5ab783b08 Merge pull request #8061 from thinkyhead/bf1_general_cleanup 
[1.1.x] Patch up some verbiage in configs
 2017-10-24 14:44:31 -05:00
Scott Lahteine
355ebec92d Fix position sync in M600 pause/resume 2017-10-24 14:41:54 -05:00
montri2025
fa157f08ff lcd <20 disply Bed Temperature cast ty (#8068) 2017-10-23 23:46:26 -05:00
Scott Lahteine
39a545b3f8 Patch up some verbiage in configs 2017-10-22 17:14:50 -05:00
Roxy-3D
e9bc9a2ab4 change to better (more clear) names (#8049) 
set_destination_to_current() changed to set_destination_from_current()

set_current_to_destination() changed to set_current_from_destination()
 2017-10-21 10:58:17 -05:00
Moritz Bitsch
b22c87183f Add MKS MINI 12864 support for GT2560 2017-10-21 13:05:21 +02:00
tweichselbaumer
fa44130734 Add M290 babystepping (#8014) 
* Add M290 babystepping

* Allow `Z` for `M290`

* fix spacing

* Support BABYSTEP_XY in M290

* Not just Z

* Extend M290 for BABYSTEP_ZPROBE_OFFSET

* tweak
 2017-10-21 03:58:53 -05:00
MetalSearch
9b3f27f02a Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 (#8041) 
[1.1.x] Fix EndStops don't work with BOARD_RAMPS_14_EFB on Micromake C1
 2017-10-21 00:24:22 -05:00
Scott Lahteine
a7398a0459 Prevent SDCARD_SORT_ALPHA from exploding 2017-10-20 19:14:11 -05:00
Scott Lahteine
91c5c2538a Add SCROLL_LONG_FILENAMES advanced option 
Based on #7637 by @marcio-ao
 2017-10-20 19:14:10 -05:00
Scott Lahteine
259cf1b0b2 BQ enables this in the config. Remove here 2017-10-18 23:23:56 -05:00
Scott Lahteine
2338632270 Simplify Cartesian probing bounds 
Followup to #8011
 2017-10-18 17:16:14 -05:00
Luc Van Daele
2a88a3fd33 boolval revised (#8017) 2017-10-18 14:19:01 -05:00
Thomas Moore
84470f6b2a Update UBL mesh boundaries to accomidate beds centered at 0, 0 (#8011) 2017-10-18 10:03:00 -05:00
studiodyne
e04902f589 Add EXTRA_FAN_SPEED feature 2017-10-16 02:32:30 -05:00
Scott Lahteine
d63d08ef8b Merge pull request #7948 from gallynero/patch-1 
Enable change feedrate in delta
 2017-10-15 16:28:45 -05:00
Scott Lahteine
5c2ff6ed19 Add Capability BUILD_PERCENT 2017-10-15 03:01:36 -05:00
Scott Lahteine
5f708d47ce Add LCD_SET_PROGRESS_MANUALLY 2017-10-15 02:21:09 -05:00
Scott Lahteine
3b4b9c6d68 Unaccented French for Character Display 2017-10-14 20:17:29 -05:00
MetalSearch
8df47d76c7 Add control board MAKEBOARD Mini 
+Add French language without accent for japanese LCD
 2017-10-14 20:10:03 -05:00
Scott Lahteine
be55a49946 Merge pull request #7980 from thinkyhead/bf1_granular_sw_endstops 
[1.1.x] Software endstop options by axis
 2017-10-14 17:37:35 -05:00
Scott Lahteine
e05af35678 Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs 2017-10-14 17:14:19 -05:00
Scott Lahteine
060d16d26b Split the software endstop capability by axis. 
Based on #7975 and #7979
 2017-10-14 17:14:08 -05:00
Scott Lahteine
e17869ca20 Fix Emergency Parser 
Followup to #7459
 2017-10-14 15:58:07 -05:00