Commit Graph

1546 Commits

Author SHA1 Message Date
Scott Lahteine
b6ffea612a Expand on More RAM concept, address minor bugs 2014-12-13 06:10:44 -08:00
Scott Lahteine
8196b36ad9 SD Card Alpha Sorting
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
2014-12-13 06:07:52 -08:00
Scott Lahteine
cf749dbeda Completed SORT_USES_MORE_RAM implementation
For the MORE_RAM option we need to buffer both the short and long
names, even though long names are sometimes redundant. Worst case, all
the names are max length. We can save some RAM by not storing these. We
could save more RAM by only storing the visible part of the long name.
2014-12-13 06:03:39 -08:00
Scott Lahteine
ae081d0fe0 Improvements, more SORT_USES_MORE_RAM
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
2014-12-13 06:03:39 -08:00
Scott Lahteine
785143a013 Expand on More RAM concept, address minor bugs 2014-12-13 06:03:39 -08:00
Scott Lahteine
0cbbba08bd SD Card Alpha Sorting
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
2014-12-13 06:03:39 -08:00
galexander1
2f9ed1777d Merge pull request #1168 from boelle/Marlin_v1
Adding Support for Toshiba Stepper Drivers
2014-12-03 09:32:23 -05:00
Bo Herrmannsen
edfcf3b527 Toshiba Stepper Driver support
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
2014-12-03 15:01:52 +01:00
Bo Herrmannsen
c429a4b3ec Toshiba Stepper Driver support
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
2014-12-03 14:37:16 +01:00
nothinman
1977b4490f Merge pull request #1159 from thinkyhead/lcd_wait_better
M0/M1 Message Fix
2014-11-28 16:44:29 +00:00
Scott Lahteine
7562183efc Skip over spaces first 2014-11-28 08:09:28 -08:00
nothinman
5a8b3a84ae Merge pull request #1155 from thinkyhead/lcd_wait_better
M0-M1 Enhancements
2014-11-28 11:01:24 +00:00
nothinman
1b7c065055 Merge pull request #1158 from elgambitero/patch-2
Updated a bit of spanish language
2014-11-28 10:57:50 +00:00
elgambitero
433ac29d31 Updated a bit of spanish language 2014-11-27 22:02:49 +01:00
Scott Lahteine
662fe8288b kill DEADJOE 2014-11-26 21:07:48 -08:00
Scott Lahteine
aad336eb81 Merge branch 'lcd_wait_better' of https://github.com/thinkyhead/Marlin into lcd_wait_better 2014-11-26 21:06:13 -08:00
Scott Lahteine
5874852501 get latest Marlin_v1 changes 2014-11-26 21:05:11 -08:00
Scott Lahteine
12b51d6060 Ignore S and P if no value >0 is included. 2014-11-26 21:05:11 -08:00
Scott Lahteine
d12b24758a Clear LCD to welcome_msg if not printing
The welcome message is more appropriate than “resuming print” if
nothing is printing.
2014-11-26 21:05:11 -08:00
Scott Lahteine
3f54c9ba33 Relocate click ignore code into info screen 2014-11-26 21:05:10 -08:00
Scott Lahteine
92e21d3ee2 M0-M1 Enhancements
Allow M0 and M1 to include a message string. Ignore clicks on “Wait for
user” so that the Info Screen stays up.
2014-11-26 21:05:10 -08:00
Scott Lahteine
5714f64927 get latest Marlin_v1 changes 2014-11-26 21:00:02 -08:00
Scott Lahteine
d407a43ac1 Ignore S and P if no value >0 is included. 2014-11-26 09:21:37 -08:00
Scott Lahteine
7681711e7e Clear LCD to welcome_msg if not printing
The welcome message is more appropriate than “resuming print” if
nothing is printing.
2014-11-24 18:50:11 -08:00
Scott Lahteine
aa4160ba62 Relocate click ignore code into info screen 2014-11-24 17:12:08 -08:00
Scott Lahteine
cd769781a1 M0-M1 Enhancements
Allow M0 and M1 to include a message string. Ignore clicks on “Wait for
user” so that the Info Screen stays up.
2014-11-24 16:56:37 -08:00
galexander1
90eb266139 Merge pull request #1148 from krasin/travis
Add Travis CI config to build Marlin firmware.
2014-11-16 08:57:31 -05:00
Ivan Krasin
d078c7c29f Add Travis CI config to build Marlin firmware. 2014-11-16 01:46:24 -05:00
galexander1
3dc9e478ad Merge pull request #1143 from Silly105/Marlin_v1
Changed graphic LCD info screen to match the set # of extruders
2014-11-12 17:41:36 -05:00
Jonas
0d97dec434 Adaption of LCD info screen
Here comes a compile-time operation to match the extruder symbols on the
info screen to the set number of extruders in configuration.h.
When only one extruder is selected, the "1" on the symbol will not be
displayed.
2014-11-12 17:10:48 +01:00
Bernhard Kubicek
4ffdbcbd4e Merge pull request #1138 from filipmu/Marlin_v1
Comment out the FILAMENT_SENSOR define by default in config.
2014-11-09 20:38:30 +01:00
Filip Mulier
5c8107bcdd Commented out FILAMENT_SENSOR #define
Commented out the FILAMENT_SENSOR define so that it is not enabled by
default.  Code does not work on all hardware variants.
2014-11-09 13:26:02 -06:00
filipmu
b014fd1ad2 Merge pull request #2 from ErikZalm/Marlin_v1
Sync up to Marlin
2014-11-09 07:01:57 -06:00
galexander1
443b648863 Merge pull request #1133 from monkeydave/update_delta_config
Updated example configurations for Delta printers
2014-11-03 08:14:54 -05:00
David
377dfb182f Updated example configurations for Delta printers 2014-11-02 21:04:54 +00:00
Erik van der Zalm
724197454c Merge pull request #1104 from ch100/Marlin_v1
Fixed typo.
2014-10-11 23:10:00 +02:00
Erik van der Zalm
058e446531 Merge pull request #1037 from filipmu/Filament-Sensor
Support for a filament diameter sensor
2014-10-11 22:56:01 +02:00
Christian Inci
110c5dcf23 Fixed typo.
Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>
2014-10-11 00:25:36 +02:00
galexander1
256c25a843 Merge pull request #1101 from MattStultz/patch-1
Fix "add_homeing" to "add_homing" to match changes
2014-10-07 08:20:53 -04:00
Matt Stultz
ca30aee903 Fix "add_homeing" to "add_homing" to match changes 2014-10-07 00:16:27 -04:00
Erik van der Zalm
0733825fb1 Merge pull request #1099 from Fourmi/Marlin_v1
Update line 627 ,wrong number on thermistortables
2014-10-06 14:36:00 +02:00
Fourmi
af3e4d7510 Update line 627 ,wrong number on thermistortables
Wrong number on line 627 > i change number "12" by the correct number "13"
Soory
2014-10-06 14:21:44 +02:00
Erik van der Zalm
aaaf8fe8dd Merge pull request #1068 from darkjavi/Marlin_v1
Added profile for RAMPS with 2 extruders and 1 fan, no heated bed
2014-10-06 13:41:38 +02:00
Erik van der Zalm
b360306881 Merge pull request #1073 from WingTangWong/wing-fix-float-delta
Wing fix float delta
2014-10-06 13:41:01 +02:00
Erik van der Zalm
ce85515428 Merge pull request #1082 from Fourmi/Marlin_v1
Add thermistor table
2014-10-06 13:39:36 +02:00
Erik van der Zalm
764921bdbf Merge pull request #1091 from Aldert/patch-1
Update motion_control.cpp
2014-10-06 13:37:19 +02:00
Erik van der Zalm
c40c7b589b Merge pull request #1095 from thinkyhead/codeclean
Simple code cleanup. Rename "homeing" to homing.
2014-10-06 13:36:48 +02:00
Erik van der Zalm
0f2e0525df Merge pull request #1096 from thinkyhead/set-home
Proposed feature: Set Home Offsets
2014-10-06 13:36:11 +02:00
Erik van der Zalm
5ae02a361b Merge pull request #1097 from thinkyhead/round-up-xyz
Adjust the Z display to hide float rounding errors
2014-10-06 13:35:00 +02:00
Erik van der Zalm
83037542aa Merge pull request #1098 from mattsch/optional_hotend_lcd
Make hotend optional when compiling with lcd support
2014-10-06 13:34:37 +02:00