wgm4321
b8e79dce89
Fix compilation errors when encoder multiplier is disabled
2015-02-19 21:51:23 -05:00
wgm4321
65e1fc71be
Add encoder rate multiplier
2015-02-19 21:42:57 -05:00
Scott Lahteine
08c236059e
Merge pull request #1505 from thinkyhead/issue_1499
...
Bed leveling probe behavior issue?
2015-02-19 01:24:17 -08:00
Scott Lahteine
ab419795b3
Merge pull request #1511 from MagoKimbra/Reset_Alert_message_M600
...
Reset Alert message when finish M600 command
2015-02-19 01:19:56 -08:00
MagoKimbra
159196d1e9
Reset Alert message when finish M600 command
2015-02-18 21:33:38 +01:00
daid
266ff227cf
Merge pull request #1510 from docdawning/Development
...
Trivial spelling correction
2015-02-17 20:59:32 +01:00
DocDawning
dfd4e74a5c
Trivial spelling correction
2015-02-17 12:37:05 -07:00
Scott Lahteine
63a5ff7ab9
Merge pull request #1489 from tommil/Development
...
Updated Finnish language file
2015-02-15 23:02:11 -08:00
Scott Lahteine
efb0491d40
Merge branch 'Development' into issue_1499
...
Merging latest upstream changes
2015-02-15 22:59:07 -08:00
Scott Lahteine
961998cf91
Merge pull request #1496 from thinkyhead/issue_1493
...
Megatronics 3 servo pins
2015-02-15 22:00:14 -08:00
Scott Lahteine
59e92a2db4
Merge pull request #1506 from thinkyhead/issue_1504
...
Issue #1504 – K8200 Z_ENABLE_PIN
2015-02-15 21:59:30 -08:00
Scott Lahteine
b71322e793
Issue #1504 – K8200 Z_ENABLE_PIN
...
- K8200 uses a non-standard RAMPS with Z_ENABLE=63 ??
- Assuming from previous input that 3DRAG is the same.
2015-02-15 21:56:23 -08:00
Scott Lahteine
978d114c73
Bed leveling probe behavior issue?
...
The `float` keyword should not be on these vars because they conceal
the outer vars, preventing them from obtaining known values before
being passed in `set_bed_level_equation_3pts`. Possibly related to
`Z_RAISE_BETWEEN_PROBING` not functioning.
2015-02-15 20:51:27 -08:00
Scott Lahteine
7c6236761a
Merge branch 'Development' into issue_1493
...
Merging latest upstream changes
2015-02-15 20:45:35 -08:00
Tommi Lamberg
3e6ae25481
Merge branch 'Development' of https://github.com/tommil/Marlin into Development
2015-02-15 12:21:57 +02:00
Tommi Lamberg
513ff94b89
Merge remote-tracking branch 'upstream/Development' into Development
2015-02-15 12:21:45 +02:00
Tommi Lamberg
07a9165ca2
Merge remote-tracking branch 'upstream/Development' into Development
2015-02-13 21:09:52 +02:00
alexborro
afc737ca0c
Fix CoreXY Homing Routine.
...
Fixed how stepper ISR figure it out when the head (extruder) is going to
Min or Max direction.
Added Homing to Max Endstops.
2015-02-13 14:38:05 -02:00
Scott Lahteine
7866fa161f
Merge pull request #1476 from Natealus/Development
...
Compiling errors with 4 Extruders defined and Viki 2 Implementation
2015-02-12 16:56:55 -08:00
Scott Lahteine
8cfdd3e8a4
Merge pull request #1423 from MoonCactus/Development
...
Multi-line G-code commands
2015-02-12 16:29:30 -08:00
Natealus
ea9e49b20d
ARRAY_BY_EXTRUDERS 4th hotend PID parameters
2015-02-12 00:56:47 -07:00
Scott Lahteine
d0ad8a978c
Megatronics 3 servo pins
...
- Naive implementation, assuming the data sheet pin numbers correspond
to Arduino pin numbers.
2015-02-11 23:46:27 -08:00
Tommi Lamberg
622a531d9c
Fixed error in translation
2015-02-11 08:50:48 +02:00
Tommi Lamberg
290ab42d22
Updated Finnish translations
2015-02-11 08:37:07 +02:00
Jérémie FRANCOIS
22a7985445
reverted to upstream
2015-02-11 07:12:55 +01:00
Jérémie FRANCOIS
b3bda57ca2
reverted to upstream
2015-02-11 07:12:02 +01:00
Jérémie FRANCOIS
9d75a56b56
Merge remote-tracking branch 'upstream/Development' into Development
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
2015-02-11 06:38:36 +01:00
Tommi Lamberg
0a59fee763
Merge remote-tracking branch 'upstream/Development' into Development
2015-02-11 06:53:43 +02:00
Scott Lahteine
d75cd69de4
Merge pull request #1488 from Wurstnase/Development
...
Bedleveling: X and Y must be Integers not Float!
2015-02-10 16:02:55 -08:00
Scott Lahteine
eb5889b3da
Merge pull request #1479 from AnHardt/en_first
...
#include "language_en.h" before the national language in language.h
2015-02-10 15:33:45 -08:00
Tommi Lamberg
a4f939cc27
Updated Finnish language file
2015-02-10 10:48:33 +02:00
Wurstnase
4546c92f5b
X and Y must be Integers not Float!
...
https://github.com/Wurstnase/Marlin/blob/Development/Marlin/Configuration.h#L427
2015-02-10 09:00:48 +01:00
Scott Lahteine
32d4dd073f
Merge pull request #1487 from AnHardt/iss1485
...
Fix for #1485
2015-02-09 21:41:07 -08:00
Scott Lahteine
f92b0dc6c7
Merge pull request #1486 from Souko/patch-1
...
Update ultralcd_st7920_u8glib_rrd.h
2015-02-09 21:32:54 -08:00
AnHardt
c246026bda
Sorry.
2015-02-10 00:23:39 +01:00
AnHardt
07e488cfae
Fix for #1485
2015-02-10 00:13:46 +01:00
Souko
e7ecf14d0c
Update ultralcd_st7920_u8glib_rrd.h
...
Fixed delay-times during Init. REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER won't get initialized on some Boards because delay was to short.
2015-02-09 21:46:06 +01:00
Scott Lahteine
8be25389f2
Merge pull request #1477 from AnHardt/languagetoconfig
...
Make display language configurable in Configuration.h
2015-02-09 05:36:57 -08:00
Natealus
f4b0a40abb
Additional fixes to temperature.cpp and found another missing line
...
Looks like INVERT_E3_DIR was missing in the configuration.h also as I
did a test compile with 4 extruders and Azteeg X3 Pro defined. So I also
added those lines too. Additional formatting to make the comments line
up better in that section.
2015-02-08 15:43:58 -07:00
AnHardt
3aac2df057
Now the oter way around.
...
Include of language_en.h now behind national language.
All "#define MSG_STR_*" now surrounded by #ifndef and #endif.
2015-02-08 20:41:20 +01:00
AnHardt
488633bf44
#include "language_en.h" before the national language in language.h
...
+ May decrease the workload for feature developers. They may omit to
update all the language files but "language_en.h". When loading _en
first, all new features give some display, but the new in English.
- May throw some additional warnings about redefinition during compile.
2015-02-08 14:26:24 +01:00
AnHardt
8e92729141
Make display language configurable in Configuration.h
2015-02-08 13:45:22 +01:00
Natealus
38a500d05c
Viki 2 Implementation
...
I've insert the define and pointer entries for the Viki 2 and miniViki
from Panucatt in all of the example configs and main config. With these
additions and with pins done in the old single pin.h style...I was able
to get the display working fine save for needing to turn Delta Segments
per Second down. But that's a common graphics lcd issue being looked
into right now.
I need assistance in understanding how the new divided pins files fit
together because my previous attempts at trying to get it to work
appropriately didn't seem successful. This originally came from trying
to find out how to swap the XYZ Min and Max Endstop pins in the Azteeg
X3 Pro. It only comes with one set of connectors and they're Min
Endstops. My previous experience didn't turn out well trying to tell the
firmware to home to the Min Endstops so the best solution I found was to
swap the pins in the firmware. If I'm missing a conflict with a setup
other than delta please let me know, but it makes sense in my setup.
2015-02-08 03:14:59 -07:00
Natealus
697ee2dc50
Compiling errors with 4 Extruders defined
...
Here were a few changes that I had to make/add lines for the 4th hotend.
A compiling problem in the Temperature.cpp and missing lines in
configuration.h and configuration_adv.h. I added these lines in all of
the example configs too.
2015-02-08 01:05:05 -07:00
Jérémie FRANCOIS
85e5aa4011
Generalized enqueue_commands_P, and moved them to Marlin_main as they should
2015-02-07 23:24:20 +01:00
Scott Lahteine
c093ea36e6
Merge pull request #1472 from thinkyhead/issue_1471_fix
...
Fan speed and 4th extruder on graphical LCD
2015-02-07 03:03:04 -08:00
Scott Lahteine
aa67b38a44
Fan speed and 4th extruder on graphical LCD
...
- Display fan speed 0-1 as “—“ and 254-255 as “100%”.
- Display 4th extruder instead of the heated bed
2015-02-07 02:44:35 -08:00
Scott Lahteine
1a3c7d91f1
Merge pull request #1470 from thinkyhead/fix_eeprom_typo
...
Fix bad typo in ConfigurationStore.cpp
2015-02-06 14:44:28 -08:00
Scott Lahteine
72856166a9
Fix bad typo in ConfigurationStore.cpp
2015-02-06 14:43:58 -08:00
Scott Lahteine
3490a19103
Merge pull request #1466 from CONSULitAS/Development_K8200_de
...
K8200: Example Configuration.h fixed
2015-02-04 17:28:04 -08:00
