AnHardt
bf04a92cc0
Draw content in display loop only when needed
...
Example for splash screen.
2015-04-05 12:53:20 +02:00
AnHardt
9865318f1c
Disable splash-screen when done once
...
Splash screen was shown with every display init.
That means every time the menus where entered.
Note the 2 in the initialisation.
The buffer is already written in two steps a 512 byte.
Without the 2 only the upper half is shown.
2015-04-05 12:24:01 +02:00
Scott Lahteine
f5dad8ade2
Merge pull request #1819 from thinkyhead/fixup_probing
...
Have the configurator read from MarlinFirmware repo
2015-04-04 20:19:44 -07:00
Scott Lahteine
53eb662908
Have the configurator read from MarlinFirmware repo
2015-04-04 20:19:17 -07:00
Scott Lahteine
cb02bc6db4
Merge pull request #1817 from AnHardt/dogm_looptest
...
Execute DOGM display-loop less often
2015-04-04 17:29:56 -07:00
Scott Lahteine
f3597cf55a
Merge pull request #1818 from quillford/patch-1
...
Fixed scara directions
2015-04-04 16:27:33 -07:00
quillford
b02a55e60f
Fixed scara directions
...
Config said for a delta instead of for a scara
2015-04-04 15:26:35 -07:00
Scott Lahteine
6c5f07c5cb
Merge pull request #1813 from thinkyhead/fixup_probing
...
Fix bad thermal runaway trigger
2015-04-04 14:41:43 -07:00
AnHardt
340d165a9c
Reduce display updates for dogm displays
...
In 'if (encoderPastThreshold || LCD_CLICKED)' lcdDrawUpdate was not set.
'lcd_status_update_delay'-loop was not effective in function
lcd_status_screen().
The loop prevented the update of the status screen but not the displays
update.
Shifted the loop into lcd_update().
2015-04-04 22:02:24 +02:00
AnHardt
418d22d7b3
Revert "Testloop cleanup"
...
This reverts commit 6361404b91
2015-04-04 18:33:36 +02:00
AnHardt
6361404b91
Testloop cleanup
...
Shifted condition should still be in.
2015-04-04 17:56:13 +02:00
AnHardt
6d4b3f0d6a
Move the condition before the loop
...
Result see: https://youtu.be/AEnBzdu9_tk
Dot is moving not so fast -> less executed loops.
2015-04-04 17:49:39 +02:00
AnHardt
4cb7dfc546
Move the 'alive dot' in every displayloop
...
Result see: https://www.youtube.com/watch?v=tdu7J0i-c4g
Loop is executed several times per display update.
2015-04-04 17:34:28 +02:00
Scott Lahteine
b0f198c153
heater_index above its use
2015-04-04 06:18:08 -07:00
Bo Herrmannsen
3d01492228
Update README.md
2015-04-04 15:07:36 +02:00
Bo Herrmannsen
bf5dbb90c4
Update README.md
2015-04-04 15:06:13 +02:00
Scott Lahteine
60f8e0386f
More thermal runaway states
2015-04-04 05:45:36 -07:00
Scott Lahteine
f9dbd73652
Fix tr_target_temperature type - float!
2015-04-04 05:25:53 -07:00
Scott Lahteine
c83faa9c5e
Merge pull request #1811 from thinkyhead/fixup_probing
...
Compare indices instead of floats for probe actions
2015-04-04 05:14:59 -07:00
Bo Herrmannsen
cabd713610
Update README.md
2015-04-04 14:12:36 +02:00
Bo Herrmannsen
f39e5988a3
Update README.md
2015-04-04 14:09:59 +02:00
Bo Herrmannsen
20a047b8c5
Update README.md
2015-04-04 14:09:39 +02:00
Bo Herrmannsen
a5e9263987
Update README.md
2015-04-04 14:08:30 +02:00
Bo Herrmannsen
506a42338b
Update README.md
2015-04-04 14:07:59 +02:00
Bo Herrmannsen
2f189be2e4
Update README.md
2015-04-04 14:07:20 +02:00
Bo Herrmannsen
1836aa2615
Update README.md
2015-04-04 14:02:58 +02:00
Scott Lahteine
61f8394361
Compare indices instead of floats for probe actions
2015-04-04 05:01:16 -07:00
Scott Lahteine
a98183b463
Merge pull request #1809 from Wackerbarth/LanguageCleanup
...
Deferring default definition made #undef unnecessary
2015-04-04 04:37:20 -07:00
Scott Lahteine
41ded7e996
Merge pull request #1805 from thinkyhead/fixup_probing
...
Optimize coordinate copying, fix EXTRUDER_RUNOUT_PREVENT
2015-04-04 03:49:54 -07:00
Richard Wackerbarth
4119738e69
Deferring default definition made #undef unnecessary
2015-04-04 05:48:07 -05:00
Scott Lahteine
6f06d33be5
Fix missing refresh_cmd_timeout function
2015-04-04 03:47:25 -07:00
Scott Lahteine
2d099a2c70
Fix missing backslash in macro
2015-04-04 03:35:16 -07:00
Scott Lahteine
0f9b29e6c5
Merge pull request #1803 from Natealus/Development
...
Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro
2015-04-03 23:45:05 -07:00
Scott Lahteine
0935084141
Fix manage_inactivity
...
- Document `manage_inactivity` function
- Allow `EXTRUDER_RUNOUT_PREVENT` to work with all extruders
- Use faster `memcpy` for copying coordinates
2015-04-03 23:42:50 -07:00
Scott Lahteine
c065da52ec
Spacing and spelling
2015-04-03 22:54:48 -07:00
Scott Lahteine
a3e129e091
Merge pull request #1801 from thinkyhead/fixup_probing
...
Minor optimizations
2015-04-03 22:30:01 -07:00
Scott Lahteine
e8a711994a
Merge pull request #1802 from Natealus/Development
...
Compiling error temperature.cpp with multiple extruders defined
2015-04-03 22:14:12 -07:00
Natealus
ab11f90da0
Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro
...
Just a simple #ifdef Z_PROBE_ENDSTOP to define the pin for it. Also has
a couple commented lines for switching Z_MIN_PIN if needed.
2015-04-03 23:14:03 -06:00
Scott Lahteine
8680b515b0
Fix missing tmp_extruder -> target_extruder
2015-04-03 22:12:49 -07:00
Natealus
a6ba40ae48
Compiling error temperature.cpp with multiple extruders defined
...
It wouldn't compile because of this line in temperature.cpp it turns out
it was just a stray ( that didn't line up with the previous lines so I
just made it in line with the rest and it compiled fine.
2015-04-03 23:09:31 -06:00
Scott Lahteine
fc3c76fc16
Fix #1800
2015-04-03 22:04:42 -07:00
Scott Lahteine
c185912c19
Latest upstream commits, mostly
2015-04-03 21:58:48 -07:00
Scott Lahteine
1e5c18bb14
Add code_value_short and SERIAL_CHAR
2015-04-03 21:43:30 -07:00
Scott Lahteine
e0d4368cb5
Minor code cleanup, move NUM_AXIS out of config
2015-04-03 20:45:24 -07:00
Scott Lahteine
4c7af484f8
Merge pull request #1787 from thinkyhead/fixup_tr
...
Fix: thermal_runaway_protection triggered by target temperature increase
2015-04-03 20:06:56 -07:00
Scott Lahteine
c747becec1
Merge pull request #1796 from thinkyhead/pidbed_temp_eeprom
...
Add PIDTEMPBED to EEPROM
2015-04-03 20:03:38 -07:00
Scott Lahteine
369a497300
Merge pull request #1797 from quillford/Development
...
Fixed README typos
2015-04-03 19:58:09 -07:00
Scott Lahteine
84e4edaea7
Add M48 comment for #1794
2015-04-03 19:52:00 -07:00
Scott Lahteine
9ba55baa5b
Track target temperature separately for each heater
2015-04-03 19:42:40 -07:00
Scott Lahteine
528e32a1d4
Fix timeout in thermal_runaway when temperature is set higher
2015-04-03 19:34:55 -07:00
