Scott Lahteine
c37f7d15c9
- Rename WRITE_E_STEP for consistency
...
- Add BIT and TEST macros
- Add _APPLY_ macros to stepper.cpp to help with consolidation
- Consolidate code in stepper.cpp using macros
- Apply standards in stepper.cpp
- Use >= 0 instead of > -1 as a better semantic
- Replace DUAL_Y_CARRIAGE with Y_DUAL_STEPPER_DRIVERS
2015-03-14 04:28:22 -07:00
alexborro
2f3c77b751
Fix decimal places in G29 Bed Equation Coeficients
2015-03-13 14:39:41 -03:00
Scott Lahteine
e3ca9137b5
Fix missing temp_error declarations
...
- Fix for #1591 replacing #1595
2015-03-11 16:38:42 -07:00
Scott Lahteine
e4d77a6313
Merge pull request #1554 from 2PrintBeta/Development
...
Macro indirection for stepper drivers + Support for TMC26X and L6470 Stepper Drivers
2015-03-11 15:31:57 -07:00
alexborro
c0b6075f77
Fix max acceleration limits in planner
...
The max acceleration limiting was in wrong place.
2015-03-11 15:08:11 -03:00
alexborro
9157cbd8f3
Add Travel Acceleration and change the M204 options
...
Added option to set Travel Acceleration (non printing moves).
The M204 options was a non sense (S for printing moves and T for retract
moves).
It has been changed to:
P = Printing moves
R = Retract only (no X, Y, Z) moves
T = Travel (non
printing) moves
I will add this info o G-Code wiki in reprap.org. I also advise to put
this info in Marlin next version changelog.
2015-03-11 13:19:02 -03:00
alexborro
888cf161bd
fix travel speed option for G29
...
I forgot to enclousure the variable with #ifdef
2015-03-11 10:03:32 -03:00
alexborro
af63b54562
Add travel speed option to G29 command line
2015-03-11 09:51:56 -03:00
alexborro
5bf42066fa
Fix typo in configuration.h
2015-03-10 15:06:34 -03:00
alexborro
8a4b62d081
Set more regular setup in configuration.h
2015-03-10 14:41:21 -03:00
alexborro
60ceca1bc1
Add speed configuration for home-bumping movement
2015-03-10 14:08:32 -03:00
domonoky
d813090d90
Merge remote-tracking branch 'remotes/upstream/Development' into Development
...
Conflicts:
Marlin/Marlin_main.cpp
Marlin/stepper.cpp
2015-03-10 10:46:37 +01:00
Scott Lahteine
c321c97f35
Merge pull request #1584 from galexander1/stringcleanup
...
fix a handful of cases where strtod() was cast to int, instead of just using strtol()
2015-03-10 01:48:30 -07:00
Scott Lahteine
0eae9c24bc
Merge pull request #1582 from galexander1/deltaconftypo
...
fix typo in delta example config introduced in commit 697ee2d
2015-03-08 21:13:14 -07:00
Scott Lahteine
624f23f550
Merge pull request #1575 from Wurstnase/fix-controllerFan
...
Fix controller fan
2015-03-08 20:36:38 -07:00
Greg Alexander
b9dfa5cad4
use code_value_long() instead of (int)code_value()
2015-03-07 17:33:15 -05:00
Greg Alexander
901b03d020
use strtol() instead of strtod() when an integer value is desired
2015-03-07 17:24:26 -05:00
Greg Alexander
4fba7b084f
fix typo in delta example config introduced in
...
commit 697ee2dc50
2015-03-07 16:43:41 -05:00
Wurstnase
a5342c942e
Update Marlin_main.cpp
2015-03-07 16:47:53 +01:00
Scott Lahteine
d085725c86
More sanity-checking for ABL
...
- Moved sanity-checks to Marlin_main.cpp
- Applied to other configuration files
- Fixed formatting of ABL output
- Passing verbose level to probe_pt
- Miscellaneous cleanup
- Put CONFIG_STEPPERS_TOSHIBA into Configuration.h
2015-03-06 22:14:34 -08:00
Scott Lahteine
9eed8c8cf0
Make sure a ROM is selected for ULTRA_LCD
2015-03-06 15:37:54 -08:00
Scott Lahteine
254970c92a
Merge pull request #1570 from C-o-r-E/escape_fix
...
Fixes gCode handling of comments and escaped characters
2015-03-06 15:09:35 -08:00
Scott Lahteine
25dc79f124
Remove M48 credits also
2015-03-06 14:54:30 -08:00
Scott Lahteine
34e51f576f
Fix compile error in gcode_G29
...
- A redo of #1576 , which missed topo_flag
- Always set verbose_level
2015-03-06 14:52:05 -08:00
Scott Lahteine
344a12bd10
Merge pull request #1571 from AnHardt/Undubble
...
Undubble MSG_MIN & MSG MAX
2015-03-06 10:08:19 -08:00
Wurstnase
62bd734612
fix controllerFan() for inverted enable pins
...
add ```^ !(n_ENABLE_ON)``` for each stepper
2015-03-06 12:01:17 +01:00
AnHardt
3024f6c706
Undubble MSG_MIN &MSG MAX
2015-03-06 00:25:44 +01:00
Gina Häußge
63b62d8d4e
Fixed in-line comments and escaping
...
* "G1 X1 ; test" was not executing "G1 X1" due to never leaving comment mode.
* "M117 Hello \;)" printed "Hello \" to the display due to not replacing serial_char properly.
Tested with the following commands:
* M117 Hello ; test => displays "Hello" on display, ignores "test"
* G1 X1 ; foo => moves 1mm in X, ignores "foo"
* ; test => completely ignored, not even acknowledged
* M117 Hello \;) => displays "Hello ;)" on display
* M117 Hello \\;) => displays "Hello \" on display, ignores ")"
2015-03-05 23:30:34 +01:00
C-o-r-E
99fb1bc3e8
Attempt to resolve #1568 and add basic escape character support
2015-03-05 15:22:37 -05:00
Scott Lahteine
cdc38aa783
Move gcode handlers into inline functions
2015-03-05 04:27:24 -08:00
Scott Lahteine
6d9e9a6bef
Merge branch 'Development' into enhanced_g29
...
Latest upstream changes
2015-03-05 02:49:18 -08:00
Scott Lahteine
4db2179f5c
Include 4th extruder support
2015-03-05 02:37:36 -08:00
OhmEye
f90a947e65
Fix autoretract
...
Autoretract was broken, looks like it was overlooked when the retracted flag was updated for multi extruders.
2015-03-04 20:28:08 -10:00
Scott Lahteine
2ef6b3d57a
Fix wrong defines, broken syntax
2015-03-04 22:24:44 -08:00
Scott Lahteine
08b722b635
Merge pull request #1555 from C-o-r-E/solenoids
...
Add support for solenoid articulated extruders
2015-03-04 21:36:29 -08:00
Scott Lahteine
32744d41a9
Do sanity checking on LRFB values
...
- Setting boundaries based on configured limits, contrasting with G28
(which forgets these limits?)
2015-03-04 21:32:11 -08:00
Scott Lahteine
d052a3c6aa
Merge pull request #1551 from thinkyhead/redundant_encrot
...
Cleanup rotary encoder encrot* defines
2015-03-04 03:22:24 -08:00
domonoky
075507fb9a
missed one X_ENABLE_PIN
2015-03-03 11:09:56 +01:00
Scott Lahteine
dfb38874f8
Some suggested changes for #1555
2015-03-03 00:48:20 -08:00
Scott Lahteine
7f8ea7105f
Arrange ProbeAction values bitwise
2015-03-02 20:14:37 -08:00
Scott Lahteine
7684721977
Enhanced G29
...
- Adapted “Enhanced G29” code referred to in #1499 and posted at
[3dprintboard.com](http://3dprintboard.com/showthread.php?3105-Auto_Bed_
Leveling-Enhanced-G29-command)
- Compatible with current G29 while adding some new arguments
- `V` sets the verbose level for serial out
- `T` (or `V` > 2) send a Topology report to serial out
- `E` works the same way as before
- `P` works as before (source used `n` or `U`/`u`)
- `L`, `R`, `B`, `F` work as before
- Still needs sanity checking for `LRBF`
2015-03-02 20:00:17 -08:00
C-o-r-E
874d3d3fc5
Add support for solenoid articulated extruders
2015-03-02 20:07:12 -05:00
domonoky
4a7aca2736
Merge remote-tracking branch 'remotes/upstream/Development' into Development
2015-03-02 17:52:12 +01:00
alexborro
715104e477
Fix Endstop check for CoreXY bots.
...
The X_Axis could not home to min while Y_Max endstop was trigged.
2015-03-02 13:36:58 -03:00
Scott Lahteine
e428e8da75
Merge pull request #1552 from thinkyhead/cleanup_cardreader
...
Cleanup of cardreader.*
2015-03-02 07:57:26 -08:00
Scott Lahteine
20e59dc61e
Don't skip files starting with underscores
2015-03-02 07:56:11 -08:00
Scott Lahteine
f171656f8e
Cleanup of cardreader.*
...
- Apply standards to cardreader.*
- Fix minor issues with cardreader.cpp
- Apply standards to some other stale regions
2015-03-02 07:06:01 -08:00
Scott Lahteine
f379edca78
Cleanup rotary encoder encrot* defines
...
The encrot values are used in only one place, and don’t vary, so remove
redundant references.
2015-03-02 06:42:48 -08:00
Scott Lahteine
49f471a5fc
Merge pull request #1541 from thinkyhead/fixup_temperature
...
Cleanup of temperature code
2015-03-02 05:38:10 -08:00
Scott Lahteine
e30bfedce4
Fix undefined *_PROBE_BED_POSITION error
2015-03-01 19:57:35 -08:00