Commit Graph

922 Commits

Author SHA1 Message Date
Dirk Eichel
ceb5ee38af Replaced corrupted language.h file on local PC with current from ErikZalm/Marlin 2013-03-01 17:27:57 +01:00
Dirk Eichel
8efd4cfd73 fixed merge conflict 2013-03-01 16:27:35 +01:00
Robert F-C
372e12f83f Implement automatic extruder/cold-end fan control based on temperature
This change allows fan outputs to automatically turn on/off when the
associated nozzle temperature of an extruder is above/below a threshold
temperature.
Multiple extruders can be assigned to the same pin in which case the fan
will turn on when any selected extruder is above the threshold.
It also makes the M42 command compatible with the M106/M107 command.
The majority of the logic in this change will be evaluated by the
compiler at build time (i.e, low code space requirements).
2013-03-01 21:57:23 +11:00
Robert F-C
6beb42cdf6 Attempt to address Bernhard's comments
Refactor configuration to try to make items clearer (what defines a
panel vs what is user changeable).
2013-03-01 01:17:07 +11:00
Robert F-C
839bef6d5d Fix Configuration.h file to not define LCDs be default.
Also fix compile time check in Marlin.pde
2013-02-28 02:32:20 +11:00
Robert F-C
1292d735ba Converge all I2C LCD branches (PANELOLU2, VIKI & PCF8575)
This includes refactoring the buttons code to remove a large amount of
non-pin dependent duplication from pins.h.
2013-02-28 02:04:51 +11:00
daid303
4eb81a69e6 Only compile the new extruder offset code if you have multiple extruders. 2013-02-27 12:32:07 +01:00
daid
3e9cd334a4 Merge pull request #383 from dob71/jeff
Hotend offset handling for multi-extruder machines
2013-02-27 03:10:18 -08:00
MendelMax
67710df9f3 Made i2c mode wok with the hardware I am able to test (ywrobot / sainsmart i2c LCD 2004)
Removed incorrect LiquidCrystal_I2C Library
2013-02-26 22:22:12 +00:00
Bob Clough
b6209c86dd Added import of Wire Library to make I2C LCD support compilable 2013-02-25 15:15:23 +00:00
Bob Clough
2b567d1df5 Added I2C port expander support to HD44780 2013-02-25 14:22:14 +00:00
Bob Clough
06272f463d Added Config variables for activating I2C LCDs and setting type and address 2013-02-25 14:14:46 +00:00
daid303
de3dec7215 Also show the tune menu when USB printing. 2013-02-20 00:54:44 +01:00
Denis Bakin
73d41c10b9 Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into jeff
Conflicts:
	Marlin/language.h
	Marlin/thermistortables.h
2013-02-18 12:10:52 -05:00
daid
63da4dc59a Merge pull request #398 from DanieleSdei/Marlin_v1
Marlin v1, alignment of the Italian language
2013-02-16 15:41:43 -08:00
Daniele Sdei
82e28851bd Italian language: SD-Card change and SD-Card init 2013-02-16 12:17:29 +01:00
Daniele Sdei
aed5965ad8 Italian language: remove space and some fix 2013-02-16 12:14:50 +01:00
codenamepawel
d360846dd4 Update Marlin/language.h
Update Polish language 	#define MSG_RESUMING "Wznawiam drukowanie"
2013-02-16 03:42:53 +01:00
daid303
2f60e324dc Fixed #394 2013-02-14 14:04:26 +01:00
daid
5e2abfcdcd Merge pull request #391 from STB3/Marlin_with_SD-Card_Change_Menu
Add SD-Card change and SD-Card init. for electronics equipped with LCD Display
2013-02-13 08:56:00 -08:00
Dirk Eichel
a0d4e8e78e Add Messages for SD Card init. & change 2013-02-13 10:05:18 +01:00
mfeherpataky
bbf0cc1379 Update Marlin/ultralcd_implementation_hitachi_HD44780.h
Fix to a bug that I just introduced - sorry. Forgot about offset of string length.
2013-02-12 20:06:51 +01:00
Dirk Eichel
c8f1fbd9d8 Add SD-Card change and SD-Card init.
Add SD-Card change and SD-Card init. for reprap electronics without
SD-Chard change detect pin.
2013-02-12 17:35:46 +01:00
mfeherpataky
71ddb8dc60 Update Marlin/ultralcd_implementation_hitachi_HD44780.h
Use all available characters in narrow LCDs < 20 characters.
2013-02-12 00:03:40 +01:00
mfeherpataky
d2c547c407 Update Marlin/ultralcd_implementation_hitachi_HD44780.h
Fix to a minor bug with hardcoded LCD_WIDTH that draws edited values outside of the 16 characters width LCDs.
2013-02-11 23:25:24 +01:00
Denis B
70871715e4 Added support for extruder offset handling
The extruder offset can be specified in the configuration
file or adjusted on the fly using the "M218 T# X# Y#" command.
The EEPROM support is not yet merged in.
The "T#" command can take option "F#" that specifies the feedrate
at which the printing head should be re-positioned. If not
specified the re-positioning move is not preformed immediately,
but the coordinates are adjusted for the printer to properly
position the head when the next movement happens.
2013-02-04 23:05:45 -05:00
Denis B
49b2ddc8c1 Cleaned up non-standard characters 2013-02-04 01:41:40 -05:00
Bernhard Kubicek
f8876a7958 Merge pull request #376 from kintel/skip_longfilenames
Also skip .files and _files with long filenames. I think its better than before. If somebody dislikes it, or wants additional configuration, it can be done in a future step. Thanks, Marius, and nice to have you helping!
2013-02-03 03:05:31 -08:00
daid
18fcc367d2 Merge pull request #371 from Banjer/Melzi_LED_PIN
Chenged LED_PIN for Melzi boards, added comment about broken versions of...
2013-02-02 03:23:43 -08:00
Bas Spaans
19ce90fe02 Added comment about M42 usage (clean) 2013-01-31 18:20:23 +01:00
Bas Spaans
00fed0a703 Revert "Extended comment explaining M42 usage"
This reverts commit 01541ee64c.
2013-01-31 18:11:13 +01:00
Marius Kintel
e06d820909 Also skip .files and _files with long filenames 2013-01-31 12:07:42 -05:00
Bas Spaans
01541ee64c Extended comment explaining M42 usage 2013-01-31 18:00:25 +01:00
Marius Kintel
f24f02e212 compile fix: quickStop() needs stepper.h 2013-01-31 10:43:03 -05:00
Bas Spaans
12c41423ad Fixed typo in comment 2013-01-30 22:54:04 +01:00
Bas Spaans
0995eaa492 Chenged LED_PIN for Melzi boards, added comment about broken versions of the Sanguino libraries 2013-01-30 22:25:01 +01:00
Bernhard
1d06b10962 Added a feature to have filament change by gcode or display trigger.
[default off for now]
syntax: M600  X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]

if enabled, after a M600, the printer will retract by E, lift by Z, move to XY, retract even more filament.
Oh, and it will display "remove filament" and beep like crazy.

You are then supposed to insert a new filament (other color, e.g.) and click the display to continue.
After having the nozzle cleaned manually, aided by the disabled e-steppers.
After clicking, the printer will then go back the whole shebang, and continue printing with a fancy new color.
2013-01-27 13:21:34 +01:00
daid303
408b349a84 Fixed #368. Commented out the wrong pin definition, but explained why it is there. 2013-01-21 15:46:17 +01:00
Daniele Sdei
9ecb267b63 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 2013-01-14 15:47:40 +01:00
Daniele Sdei
3cf59f6f9a add RepRapPro Huxley thermistor tables 2013-01-14 15:36:08 +01:00
daid
c1730e2b08 Merge pull request #363 from yuroller/sanguino_panelolu
Panelolu pin assignment for sanguinololu
2013-01-10 07:19:37 -08:00
Yuri Valentini
86358dd6cd Panelolu pin assignment for sanguinololu from http://reprap.org/wiki/Panelolu 2013-01-10 12:23:20 +01:00
daid303
0f3f5d083d Minor cleanup of the new FAN_KICKSTART code. #334 2013-01-10 11:08:45 +01:00
daid
6ec56fa923 Merge pull request #334 from KevinOConnor/FanKick
Add feature to briefly run the cooling fan at full speed when it first starts.
2013-01-09 02:47:59 -08:00
daid
965baf2683 Merge pull request #362 from daid/Marlin_v1
Finnish language
2013-01-09 02:42:09 -08:00
Kevin O'Connor
3d91bd486c Add "kick fan" feature - briefly run fan at full speed on start.
Add a feature to run the cooling fan at full speed for a small period
(default 100ms) when first starting the fan.  Some fans wont reliably
start spinning at low power, and many fans have issue with the PWM at
low power.  However, once the fan starts spinning it can reliably be
set to a wide range of PWM values.
2013-01-08 18:50:15 -05:00
Kevin O'Connor
3f2f94ef28 Be consistent in setting of the fan PWM.
Always set the FAN PWM value in check_axes_activity() and always use
the value of the active move if a move is active.
2013-01-08 18:49:18 -05:00
Henry Palonen
7f30039d2a + Finnish translation 2013-01-08 19:21:34 +02:00
daid303
14e1d495ef Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2013-01-08 17:10:30 +01:00
daid303
bbe7d3d0fe Fixed #312 2013-01-08 17:09:57 +01:00
daid
7ce509b9a7 Merge pull request #361 from yuroller/MakefileSanguino
Makefile sanguino
2013-01-08 06:22:27 -08:00
Yuri Valentini
9c34c4f05b fixes for ramps compilation using installed arduino ide 2013-01-08 12:54:31 +01:00
daid303
442ade15a6 Move Gen6 stuff into a proper location. 2013-01-08 12:31:28 +01:00
daid
5fd4582cc8 Merge pull request #242 from Drakelive/Marlin_v1
Fixes issues # 216 and # 135 for Gen6 and Gen6 Deluxe board
2013-01-08 03:29:20 -08:00
daid303
8b88e3b386 Fixed #345, Fixed #267. 2013-01-08 12:14:55 +01:00
daid
27843388c6 Merge pull request #360 from njprossi/Marlin_v1
Power signal control definitions for other power supplies
2013-01-08 02:58:02 -08:00
daid303
921273baa0 Added optional feature to stop printing when an endstop is hit. Made the Z display on the LCD in 3.2 format instead of 3.1. Added LCD message when and endstop is hit. 2013-01-08 11:53:18 +01:00
Yuri Valentini
7d20ec706e Added libraries from Arduino 1.0.3 for sanguino build 2013-01-07 17:26:50 +01:00
Nicolas Rossi
437eb3bafc Initialize PS_ON at startup 2013-01-07 14:57:51 +01:00
Nicolas Rossi
f3c1fc70a9 Power signal control definitions for ATX and others 2013-01-07 14:33:30 +01:00
Yuri Valentini
dad7691df9 makefile for sanguino standalone compilation 2013-01-07 11:08:10 +01:00
Erik vd Zalm
6752cb2d9c PID now per extruder. Fixed typo 2013-01-06 14:26:23 +01:00
Erik vd Zalm
0ac452e252 Disable is now multi extruder compatible. M84 got a T option. 2013-01-06 13:37:01 +01:00
Johann Rocholl
9e7b5056a0 {X,Y,Z}_{MIN,MAX}_POS are actually in Gcode coordinates. 2012-12-28 16:20:10 -08:00
Daniele Sdei
5f82f03ff3 Add italian MSG_RESUMING. 2012-12-28 11:44:35 +01:00
daid303
5e3873c8db Add german MSG_RESUMING. 2012-12-25 20:53:11 +01:00
daid303
01aac2a142 Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu. 2012-12-21 16:14:47 +01:00
daid303
b69cb9fbd9 Change the end of SD cart print message from minutes/seconds to hours/minutes. 2012-12-19 12:26:40 +01:00
daid
30254e3388 Merge pull request #350 from jcrocholl/Marlin_v1
Automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
2012-12-17 02:16:31 -08:00
daid303
38ee395ac7 Replace the 1ms delay for 2 nops to get a 100ns delay. #259 2012-12-17 11:12:11 +01:00
daid303
5df5e4c4a2 Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2012-12-17 11:09:18 +01:00
daid303
a95dcd74e7 Fix some of the duplicated PSTRs, saving 500bytes of flash with LCD on. 2012-12-17 11:09:09 +01:00
Johann Rocholl
8caf5d252d Remove bogus blank line. 2012-12-16 12:50:20 -08:00
Johann Rocholl
1c2ecddae4 Fix typo (# missing before define). 2012-12-16 12:33:44 -08:00
Johann Rocholl
6dfb8a2187 Fix home_all_axis to make QUICK_HOME work with Repetier-Host which sends G28 X0 Y0 Z0 instead of G28. Thanks to Matt Schoenholz for reporting this issue. 2012-12-16 12:30:33 -08:00
Johann Rocholl
3b2e5027e5 Merged updates from Marlin_v1. 2012-12-16 12:19:24 -08:00
Johann Rocholl
b39f5d614a For boards with only one endstop per axis, automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR. 2012-12-16 12:09:53 -08:00
oni303
ab09fa4bbf fixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp 2012-12-16 01:36:57 +01:00
Sergey Taranenko
5697451c72 fix lcd class 2012-12-14 15:39:47 +04:00
Sergey Taranenko
58e806f3fa Fix the russial translation. 2012-12-14 15:39:26 +04:00
Sergey Taranenko
50a5ce1dc4 deduplicate messages 2012-12-14 15:37:05 +04:00
daid303
6123a00e64 Fix the german translation. 2012-12-14 11:11:02 +01:00
daid303
7c21716886 Fixed #341 2012-12-14 10:53:11 +01:00
daid303
ae1bc83350 Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2012-12-13 13:25:22 +01:00
daid303
596a7e1904 Fix compiling for Arduin < 1.0.0 2012-12-13 13:24:55 +01:00
Daid
b264317fa0 Reverted the patch by KevinOConnor, as it crashes some versions of avr-gcc and caused linking issues. 2012-12-13 12:19:12 +01:00
Daid
673577a31b Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2012-12-13 11:41:34 +01:00
Daid
23022f1a82 Updates to Makefile to compile for Teensy. 2012-12-13 11:41:27 +01:00
daid
96e9db8919 Merge pull request #339 from KevinOConnor/CompilerFlags
Add additional optimization flags to Makefile
2012-12-13 01:30:17 -08:00
daid303
08356361ac Fixing a problem with heated beds not working without PID and BED_LIMIT_SWITCHING 2012-12-13 10:25:29 +01:00
daid303
047d037f8c #ifdef fix for #326 2012-12-13 09:04:41 +01:00
Kevin O'Connor
0908458381 Use gcc "-fwhole-program" optimization.
Use "whole program" and "link time optimization" features of gcc.  The
whole-program optimization enables the compiler to evaluate the entire
firmware for optimization instead of just one code file at a time.
This leads to better overall optimizations.
2012-12-12 23:22:35 -05:00
Kevin O'Connor
16fbb455ef Use linker "--relax" option.
The "relax" option enables the linker to convert certain "call"
instructions to the smaller "rcall" instruction.  This reduces the
size of the resulting binary.
2012-12-12 23:22:31 -05:00
daid303
f30b46b2a8 One more fix for #338, I really should get a heated bed to test with. 2012-12-12 23:06:17 +01:00
daid303
65c3f1ffcd Most likely fixing #338 2012-12-12 21:56:17 +01:00
daid303
7577717b59 Fixed #336 2012-12-12 13:08:26 +01:00
daid303
1a8f54cea1 The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated. 2012-12-12 11:47:03 +01:00
daid303
6731c094ee Fix compiling with just an 16x2 LCD and no buttons. 2012-12-12 11:32:33 +01:00
daid303
b99a928a80 Fix the M117 (display message on LCD) when used over USB with checksums. 2012-12-12 09:35:32 +01:00
daid303
55ba90ac19 Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target. 2012-12-12 09:08:37 +01:00
daid303
5ff5cee8ce Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition) 2012-12-11 14:53:53 +01:00
daid303
8b58edc70e Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2012-12-11 13:38:34 +01:00
daid
d0319d45af Merge pull request #335 from jcrocholl/Marlin_v1
Fix endstop pins for Printrboard
2012-12-11 02:59:58 -08:00
Johann Rocholl
ca409e5531 Fix X/Y/Z_MIN_PIN for Printrboard. 2012-12-11 01:59:48 -08:00
Johann Rocholl
1f45cb0a51 Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments. 2012-12-11 01:54:40 -08:00
Johann Rocholl
931a0052ea Fix typo in MANUAL_HOME_POSITION (plural S missing) and reduce BLOCK_BUFFER_SIZE because 64 wasn't working for some reason. 2012-12-11 01:22:04 -08:00
daid303
46ec4b648c Added some missing Mxxx comments to M commands. Fixed the unsetting of the timer dividers for the fast PWM fan. 2012-12-11 10:21:44 +01:00
Daid
724f5aa36b Update on makefile for moved Arduino addons. 2012-12-10 12:06:30 +01:00
daid303
6d9dfa96c3 Move the Arduino related stuff out of the Marlin tree, as they are not directly related to Marlin functionality but addons for the Arduino IDE. Also split up the addons for pre 1.0.0 Arduino and post 1.0.0 Arduino. 2012-12-10 12:02:29 +01:00
daid303
3fb07d9b8d Add MINTEMP/MAXTEMP error to LCD, and fix temperature bug with more then 1 extruder. 2012-12-10 10:48:46 +01:00
Johann Rocholl
8e2519e88b Add realtime delta geometry in Marlin_main.cpp. 2012-12-10 01:04:12 -08:00
Johann Rocholl
cec7283b21 Enable QUICK_HOME for deltabot. 2012-12-10 00:43:47 -08:00
Johann Rocholl
2292441f0c Use X/Y/Z_MAX_PIN instead of X/Y/Z_MIN_PIN for top endstops on deltabot. 2012-12-10 00:43:14 -08:00
Johann Rocholl
c430906d3b Deltabot settings and configuration adjustments. 2012-12-10 00:10:56 -08:00
daid303
82c8724b33 Fix compile with PID_DEBUG 2012-12-09 23:50:12 +01:00
daid303
9b160972a1 Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2012-12-09 23:46:42 +01:00
daid303
e036750bdf Use the disable macros on initialization. Which fixes a bug when there is no pin defined for stepper enabled (motherboard 4) 2012-12-09 23:46:25 +01:00
Daid
fcd9de72ef Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2012-12-09 23:31:07 +01:00
Daid
32d4373e0f Add printrboard and brainwave to Makefile. 2012-12-09 23:30:55 +01:00
daid
b3ddbcee2a Merge pull request #329 from jcrocholl/Marlin_v1
Add Printrboard and Brainwave to pins.h and fastio.h
2012-12-09 14:29:26 -08:00
Daid
29435dfb4b Proper avr for Sanguino in Makefile. 2012-12-09 23:02:03 +01:00
daid303
52158dffcc Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 2012-12-09 23:00:06 +01:00
Daid
ca7acbe6d9 Allow specification of which arduino hardware subvariant in Makefile. 2012-12-09 19:19:57 +01:00
Johann Rocholl
33247733e0 Teensylu and Printrboard use different analog pins for thermistors. 2012-12-09 02:19:13 -08:00
Johann Rocholl
621c24a10f AT90USB is only defined after pins.h is included. 2012-12-09 01:40:33 -08:00
Johann Rocholl
6cba11f087 Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well. 2012-12-09 01:32:09 -08:00
Johann Rocholl
4d351b4846 Improved formatting and comments for consistency. 2012-12-08 20:15:53 -08:00
Johann Rocholl
a30007caa4 If fastio.h is not messed up then Teensylu and Printrboard are actually using the same pins. 2012-12-08 19:46:42 -08:00
Johann Rocholl
6aa87a7b67 Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7. 2012-12-08 15:16:38 -08:00
Johann Rocholl
b1c38d4c82 Avoid compiler warnings (redefined MOTHERBOARD) in Arduino 1.0 and greater. 2012-12-08 11:34:18 -08:00
Johann Rocholl
42e21bb06e Add support for Printrboard (from https://github.com/lincomatic/Marlin) and Brainwave (from https://github.com/metrix/Sprinter). 2012-12-08 10:49:01 -08:00
Johann Rocholl
ce4b5bbeaa Add AT90USB646 support from Sprinter to fastio.h. 2012-12-08 10:45:58 -08:00
Daid
f413aa33b3 Small makefile change, posibility to add defines on the commandline, and fix compiling with watchdog enabled when using the Makefile. 2012-12-08 11:49:53 +01:00
daid303
587154c01b Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up. 2012-12-06 10:36:07 +01:00
daid303
1f27870d41 Fix compiling the watchdog error message when the manual reset watchdog is used. 2012-12-06 10:27:50 +01:00
daid303
c5d4225804 Mistake there, not sure why I did that. My bad. 2012-12-05 20:23:13 +01:00
daid303
529748894c Minor changes in the temperature code for some cleanup. 2012-12-05 19:54:01 +01:00
daid303
4e26ecc940 The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message. 2012-12-05 19:32:26 +01:00
daid303
c421774422 The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message. 2012-12-05 19:32:02 +01:00
daid303
16078e47d4 Fixed #325 2012-12-04 16:27:21 +01:00
daid303
6a9bee27cc Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 2012-12-03 12:52:00 +01:00
daid303
94ea26ff46 Some minor changes on code style. And a bugfix where the counters for positioning in the stepper where wrong depending on compiler settings. (Caused strange values to reported back with M114 and endstop triggers). Also fixed compiling with FWRETRACT enabled. 2012-12-03 12:13:20 +01:00
daid303
6c51fe5039 Fix the bug where the SD percentage calculation is wrong when the file is larger then 42MB 2012-12-03 11:35:36 +01:00
brupje
57429cb9fe Fix for keypad 2012-11-29 21:42:19 +01:00
daid303
97fa2a9c30 Few simple fixes that save RAM, as static strings are stored in RAM by default. 2012-11-28 10:30:34 +01:00
Daid
c94ca24adc Fixed #317 2012-11-24 17:32:30 +01:00
Daid
99e9554edd Some fixes in the Makefile to support Arduino 1.0.0 or higher and added the Rambo. Still needs some more work for the different arduino hardware variants. 2012-11-24 11:46:31 +01:00
Erik vd Zalm
dbbf050005 More rambo fixes 2012-11-21 20:53:56 +01:00
Erik vd Zalm
f934d0ef5b Merge remote-tracking branch 'tonokip/Marlin_v1' into Marlin_v1
Conflicts:
	Marlin/Configuration.h
2012-11-21 20:36:30 +01:00
Erik vd Zalm
e48dfcc2b3 Tmp copy before merge 2012-11-21 20:29:31 +01:00
Erik vd Zalm
b98fb17fe9 Small FREQUENCY_LIMIT changes 2012-11-21 20:17:44 +01:00
daid
bce67ec2c9 Merge pull request #312 from gege2b/Marlin_v1
Added french translation
2012-11-18 13:43:07 -08:00
Gege
9b1d2483a0 I hope last changes to french translation 2012-11-18 22:34:56 +01:00
Gege
b1adc567da Correction to french translation (non-ASCII chars only) 2012-11-18 20:00:41 +01:00
Gege
0807d82af0 Correction to french translation (plain text only) 2012-11-18 19:39:56 +01:00
Erik vd Zalm
5cd7a90b32 Added new temperature lookup table creation tool. This one uses stein hart-hart equations.
You need 3 temperature resistance:combinations. This gives a better result then using beta.
2012-11-16 23:51:05 +01:00
gege2b
bb119739b0 Added french translation 2012-11-16 18:38:50 +01:00
daid
df8dd5ac21 Merge pull request #306 from nothinman/Marlin_v1
Added automatic build numbering.
2012-11-14 01:59:33 -08:00
MaikStohn
2b7b1e52b1 allow marlin internal 0°C represenation 2012-11-13 14:37:08 +01:00
Martin Lukasik
2f771b3979 Added automatic build numbering. 2012-11-12 21:06:59 +00:00
daid
9bebe9b631 Merge pull request #302 from nothinman/Marlin_v1
Added Polish translation. Cosmetic changes to English.
2012-11-12 12:13:30 -08:00
daid303
a2032afa3a Fixed #303 2012-11-12 21:04:07 +01:00
Martin Lukasik
6a55ca8370 Added Polish translation. Cosmetic changes to English. 2012-11-12 15:54:07 +00:00
daid303
8f20562f49 Fix some of the crowded code style. And fixed the conditional. #300 2012-11-12 15:49:40 +01:00
daid303
43018a48c4 Fix for a few -Wextra warnings. 2012-11-12 15:35:28 +01:00
daid303
72586eb30a Solved few warnings. 2012-11-12 09:29:12 +01:00
daid303
7a02ba361c Header multiple include protection should match the filename, not just _ARDUINO_H, which is almost bound to go wrong some day. 2012-11-12 09:24:28 +01:00
daid303
f4a89ec776 SDCARDINSERTED is always defined, and thus we do not need the #ifdefs. 2012-11-12 09:16:27 +01:00
daid303
57834776ad Made the 2nd speed lookup table condition more explicit. 2012-11-11 12:02:48 +01:00
Daid
caa2b25b40 Fix Gen7 compile if you have avr-libc version 1.7.1 or higher. See http://code.google.com/p/arduino/issues/detail?id=604 2012-11-11 11:17:54 +01:00
daid303
a27fef8750 Store the pre-heat constants outside of the ULTIPANEL define, so we can use them when storing EEPROM in a build without the ULTIPANEL. 2012-11-11 11:06:58 +01:00
daid303
789be03b4f Update on makefile, should make it easier to compile for different boards without changing the makefile. (Still missing Arduino 1.x.x support). 2012-11-11 11:05:52 +01:00
daid303
40ce057a3e Fixing issue #297 2012-11-10 14:37:01 +01:00
daid303
625ac81acc Yes, makes sense, lets NOT use the value directly from the configuration define but modify it before setting it. This will not confuse people (including me) at all! 2012-11-09 22:36:31 +01:00
daid303
ffc69537aa Update on some comments, make the MOTHERBOARD list complete again. 2012-11-09 09:10:51 +01:00
daid303
71efcfc648 Most likely fixing issue #295. 2012-11-08 21:08:05 +01:00
daid303
04be9d6001 God damn. Sorry, my mistake, forgot to add this file. 2012-11-07 23:16:43 +01:00
daid303
c17da4b707 Add ConfigurationStore to the Makefile. 2012-11-07 22:43:01 +01:00
daid
ccd9fd0dc3 Merge pull request #292 from jothan/lcdfix
Lcd fixes
2012-11-07 13:10:59 -08:00
Jonathan Bastien-Filiatrault
46b9988e26 Search and replace failure. 2012-11-07 16:09:30 -05:00
Jonathan Bastien-Filiatrault
0f73afb0b0 Avoid defining overriding definitions for the RepRapDiscount Smart
Controller. Remove common definitions. Harmonize declaration order.
2012-11-07 16:04:28 -05:00
Jonathan Bastien-Filiatrault
36b452c7ac Remove abbrs. 2012-11-07 15:42:18 -05:00
YanFM
332344bd43 Update Marlin/language.h
Included Portuguese language
2012-11-07 09:43:13 -02:00
daid303
e6c1cadea0 Set the watchdog to a 4 second timeout, as with 1 second it can timeout during SD card init. 2012-11-07 12:32:17 +01:00
daid
faea7d72b8 Merge pull request #290 from buildrob/Marlin_v1
Clean up special serial port cases
2012-11-07 02:00:26 -08:00
daid303
12a4d60e18 Fix the EEPROM storage, no longer inline it at multiple locations, and remove the template. 2012-11-07 10:02:45 +01:00
Jonathan Bastien-Filiatrault
9606f4d04f Include Marlin_main.cpp in source files. 2012-11-06 20:32:48 -05:00
Jonathan Bastien-Filiatrault
3cbaad9288 RepRapDiscount Smart Controller pin definitions. 2012-11-06 20:32:13 -05:00
Robert F-C
99692dc99e Clean up special serial port cases
Assume SERIAL_PORT 0 if not defined. Collapse un-numbered register
special case. Clarify comments.
2012-11-07 09:00:21 +11:00
daid303
5a998558a9 Update suggested by Robert F-C. #289 2012-11-06 21:04:29 +01:00
daid303
f6ff0ab767 signed/unsigned fixes. 2012-11-06 15:33:49 +01:00
daid303
5d471e0f34 Also reset the PID values to defaults. Fixes #281 2012-11-06 15:21:00 +01:00
daid303
d3ebc34958 Hopefully also support chips with a single UART in MarlinSerial now. 2012-11-06 14:43:36 +01:00
daid303
b6ff45254e Better explain the watchdog "problem" and rename the config define so it explains that the feature belongs to the watchdog. 2012-11-06 13:33:00 +01:00
daid303
7e348fcb5f By mistake enabled the watchdog by default. This should be off by default. 2012-11-06 13:20:08 +01:00
daid303
06b58a9c4f First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions. 2012-11-06 12:06:41 +01:00
daid
539f3b3fe4 Merge pull request #284 from brackendawson/Marlin_v1
Use the right pins for Gen7 1.4
2012-11-06 01:06:24 -08:00
Robert F-C
65c9a0728f Set default serial port back to 0. 2012-11-05 22:15:07 +11:00
Robert F-C
ab9d183024 Make serial port configurable.
This change makes the choice of serial port configurable so that
wireless capability can be easily added by connecting Bluetooth modules
(such as BlueSmirf or JY-MCU) to the expansion port pins.
2012-11-05 21:34:27 +11:00
Bracken Dawson
f5631a89e8 Add dummy Emergancy Pin to Gen7 1.4
Change required after pulling from ErikZalm.
2012-10-26 22:28:37 +01:00
Bracken Dawson
a4f9e1ebf2 Merge git://github.com/ErikZalm/Marlin into Marlin_v1 2012-10-26 22:20:35 +01:00
Bracken Dawson
2873d67b17 Put bogus temp override back in Gen7 up to 1.3
Took out the ifdef when I split 1.4 out and forgot to permanently
define it for <=1.3.
2012-10-26 22:17:26 +01:00
ErikZalm
a7e40b2903 Merge pull request #276 from setar/Marlin_v1
Fix num of digits on LCD for E and Z axis.
2012-10-23 09:48:55 -07:00
MaikStohn
6ed02c86be Fixed wrong code (will not even compile when EXTRUDERS>2) 2012-10-23 18:08:43 +02:00
Sergey Taranenko
2a67363e27 Fix ‘prog_uchar’ definition in LiquidCrystalRus.cpp 2012-10-22 11:05:17 +04:00
Sergey Taranenko
205304ddee Merge git://github.com/ErikZalm/Marlin into Marlin_v1 2012-10-22 10:59:27 +04:00
Erik vd Zalm
58bca87c72 fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 ' 2012-10-21 14:40:06 +02:00
Erik vd Zalm
febeb43197 Revert "fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '"
This reverts commit cb02c2f9d8.
2012-10-21 14:36:31 +02:00
Sergey Taranenko
8178dec4c3 Fix num of digits on LCD for E and Z axis.
The number of steps per mm often contains 4 digits before the decimal point and does not require precision greater than 0.1
2012-10-18 17:45:40 +04:00
ErikZalm
70f57a6844 Merge pull request #273 from setar/Marlin_v1
fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '
2012-10-17 04:10:18 -07:00
ErikZalm
ff14199e58 Merge pull request #270 from jothan/Marlin_v1
Create an explicit rule for building applet/Marlin.cpp.
2012-10-17 04:09:36 -07:00
Daniele Sdei
695938ba3f Italian language support 2012-10-17 12:48:26 +02:00
Sergey Taranenko
cb02c2f9d8 fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 ' 2012-10-17 10:49:05 +04:00
Jonathan Bastien-Filiatrault
e4a5e333ef Generalize. 2012-10-15 21:34:33 -04:00
Jonathan Bastien-Filiatrault
e10d3136c8 Create an explicit rule for building applet/Marlin.cpp.
It would seem that the pattern matches do not work when the source
file is created when make is running. The result of this is that it is
necessary to run "make" twice to build the firmware.

This adds an explicit rule without a pattern match for building
applet/Marlin.cpp it corrects the make behaviour at the cost of adding
a little redundancy in the Makefile.
2012-10-15 21:16:25 -04:00
ErikZalm
9f089756b7 Merge pull request #265 from setar/Marlin_v1
Added Russian translation
2012-10-14 14:11:58 -07:00
brupje
326423719f Add support for Megatronics 2012-10-14 14:05:57 +03:00
brupje
d07b6e93d5 Add support for Megatronics 2012-10-14 14:05:12 +03:00
Sergey Taranenko
efcc28d347 Fix check for include LiquidCrystalRus.h 2012-10-13 00:29:34 +04:00
Sergey Taranenko
cfc193cdac Enables support the Cyrillic alphabet for LCD 2012-10-12 19:06:43 +04:00
Sergey Taranenko
24bcc9647d Added Russian translation 2012-10-12 18:33:05 +04:00
Mark Finn
bf7e453d02 Unwanted artifacts from unclean merge of bed-pid tree 2012-10-09 14:47:35 -05:00
ErikZalm
36a746d7d5 Merge pull request #244 from markfinn/pidbed
PID for heated bed
2012-10-08 11:15:16 -07:00
elgambitero
df09e2adce Spanish updated 2012-09-26 19:14:07 +02:00
elgambitero
ddf6603d81 Spanish language updated. Bug fixes on dialogs. 2012-09-26 19:11:45 +02:00
elgambitero
4bf8b1aeee fesfas 2012-09-26 19:05:31 +02:00
drakelive
be1e099f1b Union whit Erick version 2012-09-25 19:17:15 +02:00
elgambitero
7afd202b89 New dialogs translated to spanish. Bug fixes.
Dialogs from M119 translated, and "Set Preheat" dialogs adapted to the
screen size.
2012-09-25 19:16:57 +02:00
elgambitero
ebc4601185 Some new dialogs translated to Spanish 2012-09-25 19:08:44 +02:00
drakelive
c8ea9b0e58 Merge branch 'Marlin_v1' of https://github.com/Drakelive/Marlin 2012-09-25 18:51:20 +02:00
drakelive
ca7ca4572e primo commit 2012-09-25 18:46:38 +02:00
johnnyr
8016f058bc fix max endstop pins 2012-09-19 13:15:17 -05:00
Mark Finn
d197f8504b clean up and changes from testing 2012-09-17 19:18:50 -05:00
Mark Finn
eb06a886c4 missed 2012-09-17 14:23:49 -05:00
Mark Finn
04631d2250 cleanup for pull 2012-09-17 14:17:24 -05:00
Mark Finn
0a5ad3ab85 move comment to correct place 2012-09-17 08:42:35 -05:00
ZetaPhoenix
8ac5b29e02 Changes to M119 response for easier visual comparison
Changed to report on individual lines with "TRIGGERED" or "open" instead of "H" or "L" on one line as H&L could be confused with logic levels High and Low which may be wrong if using inverted logic.  Added strings to language.h.

Fixed typo "deu" in English language that was fixed in #134 but got added back in via 9f7f7354f5
2012-09-16 14:51:24 -07:00
ZetaPhoenix
c6caa45ae2 Limit Switch locations based on MIN/MAX limits and homing direction
fixes #246
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
Relocated code based on feedback.
2012-09-15 15:25:49 -07:00
ZetaPhoenix
dc566d654f fixes #246
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
2012-09-14 21:48:49 -07:00
ErikZalm
ba898faa7d Merge pull request #249 from gwelchc/patch-2
Slight modification for byte savings
2012-09-14 12:13:36 -07:00
ErikZalm
0152ee71a5 Merge pull request #248 from gwelchc/patch-1
Binary representation for characters in ultraldc.pde
2012-09-14 12:10:28 -07:00
G. W. C.
6ccbfeb80c Update Marlin/Marlin.pde
Added function 'setTargetedHotend' that turns into a function an operation repeated 3 times through the M-codes processing.

This modification saves a few bytes that can be used to add support for new commands.
2012-09-14 16:38:54 +03:00
G. W. C.
c433142abf Update Marlin/ultralcd.pde
The joris' char drawins are expressed in binary so to show their content's in a more visual fashion.

This is not a code modification as much as a readibility modification.
2012-09-14 16:29:43 +03:00
andrey-vasilyev
1d389ad3a8 Fix M81 not working reliably on Gen7
Some discussion of the issue is here http://forums.reprap.org/read.php?181,118329,page=1
2012-09-13 19:23:48 +04:00
Mark Finn
9698f4ea64 bed pid
Conflicts:

	Marlin/Configuration.h
2012-09-12 21:18:59 -05:00
drakelive
e5c39b7c2a commit 2012-09-10 14:25:49 +02:00
ZetaPhoenix
e8c92e0a95 Missing #else in temperature.cpp prevented reading bed temp when TEMP_BED_PIN <7. Thanks to Leland Wallace for helping me track this down via "Sesame Street" coding (what is not like the other) 2012-09-09 16:06:02 -07:00
drake
bf2071871c Merge branch 'Marlin_v1' of https://github.com/Drakelive/Marlin 2012-09-08 23:08:34 +02:00
drake
fc32e20881 first commit 2012-09-08 22:26:23 +02:00
Erik vd Zalm
abf0693e8e Added KILL_PIN -1 to gen7 boards 2012-09-04 08:20:27 +02:00