Commit Graph

10031 Commits

Author SHA1 Message Date
Giuliano
e6801ff84a [1.1.x] Fix change filament (#11268)
Prevent crash, on filament change, when printer is not homed
2018-07-16 21:48:45 -05:00
Roxy-3D
bc961220b7
Change Max7219_idle_task() routines to use single line if X-Axis has 16 or more LED's
Change Max7219_idle_task() routines to use single line if X-Axis has 16 or more LED's

This gets bugfix_1.1.x at parity with https://github.com/MarlinFirmware/Marlin/pull/11285 when it gets merged.
2018-07-16 19:23:59 -05:00
kaimimue
256f76d35e Fix Vellemann K8400 Configuration (#11258)
The maximum movement is 180mm for Velleman K8400.
An offset of `Y_MIN_POS` violates an assertion in `SanityCheck.h`.

Code tested on Vellemann K8400 with Dual Extruder.
2018-07-13 23:15:00 -05:00
Giuliano
1067c43107 [1.1.x] fix kill printer (#11261)
This will fix kill message on dual printer with 0 alignment offset
2018-07-13 23:13:29 -05:00
Scott Lahteine
d60b2e5ba8
Merge pull request #11233 from nightgryphon/multiprobe-z-up
[1.1.x] Shorter Z raise between multiple probes
2018-07-12 22:44:25 -05:00
Scott Lahteine
cb0777dbeb
Merge pull request #11248 from thinkyhead/bf1_tmc_unify_param_i
[1.1.x] Unify "I" parameter for M906,M912 etc.
2018-07-12 22:31:26 -05:00
Scott Lahteine
8f110190eb Add Z_CLEARANCE_MULTI_PROBE to example configs 2018-07-12 22:27:06 -05:00
nightgryphon
54adf6f52d Shorter Z up move between multiple probing attempts
For some probes like micro switches the full Z clearance raise between
probing attempts is not required while bigger Z clearance between probe
points is still needed to avoid clamps. The shorter Z raise within
multiprobing same point significantly increase probing speed and the whole
auto level process.
2018-07-12 22:27:06 -05:00
Clifford Roche
3b5c81b84a [1.1.x] Validate that X/Y_PROBE_OFFSET_FROM_EXTRUDER are integers (#11255) 2018-07-12 21:22:59 -05:00
Scott Lahteine
d8331d97d6 Unify M91x parameter I meaning, simplify reports 2018-07-11 20:31:40 -05:00
Scott Lahteine
5cddfce0ee Endstops::report_state => event_handler 2018-07-11 19:47:25 -05:00
Aaron Griffith
5f587126b9 Loosen static assertion guarding overflow in SCAN_THERMISTOR_TABLE (#11240)
Bisect search merged in #10882 actually works fine for thermistor
tables with up to 255 entries with no overflow, due to C++ integer
promotion rules.

Closes issue #11220.
2018-07-11 16:42:23 -05:00
Roxy-3D
39b3e4c501
Support for multiple Max7219 units in a chain (#11226)
* Support for multiple Max7219 units in a chain

I'll move this support over to bugfix_2.0.0 in the next few days.   And
then look at updating the Max7219_idle() routine to make use of multiple
units in a chain.

* spelling correction
2018-07-08 17:35:58 -05:00
Roxy-3D
fae2929b6b
Resolve issue where user can't edit mesh 2018-07-08 14:39:08 -05:00
Scott Lahteine
ccb225f43a
Float maths updates for 2.0.x parity (#11213)
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-07-06 21:44:33 -05:00
Scott Lahteine
fc9f4ce2c0 Fix missing quote in language list
Co-Authored-By: p3p <p3p@p3psoft.co.uk>
2018-07-04 13:40:18 -05:00
Scott Lahteine
a69cc6c5ba Fix Trigorilla include typo 2018-07-03 20:22:36 -05:00
Scott Lahteine
03a704600c
No M914 or SGT set for non-sensorless axes (#11197) 2018-07-03 20:10:43 -05:00
Scott Lahteine
e84341412c
Merge pull request #11194 from Schullebernd/bugfix-1.1.x
[1.1.x] Tronxy X3A configurations and thermistor
2018-07-03 19:05:51 -05:00
Scott Lahteine
fae20983eb Add configurations for Tronxy X3A 2018-07-03 18:14:46 -05:00
Scott Lahteine
559e935785 Bring default Configuration.h up to date 2018-07-03 18:10:55 -05:00
Marcel Schulz
432da42dba Add thermistor 501 (100K Zonestar) 2018-07-03 18:10:55 -05:00
Scott Lahteine
0702c78e62
Fix and improve POWER_LOSS_RECOVERY (#11186) 2018-07-02 23:21:18 -05:00
Scott Lahteine
84187dca5c Add "Marlin Dev Mode" option 2018-07-02 22:53:01 -05:00
Scott Lahteine
b7c648db32 Minor patches for POWER_LOSS_RECOVERY 2018-07-02 17:25:15 -05:00
Scott Lahteine
a83f7f1d25 Turn off DISABLE_INACTIVE_EXTRUDER with SWITCHING_NOZZLE
Fix #11183
2018-07-02 17:25:15 -05:00
Roman Moravčík
5700360adf [1.1.x] Slovak translation update (#11174) 2018-07-01 23:15:14 -05:00
Scott Lahteine
defaa93121
Do a hard kill for failed homing moves (#11160) 2018-06-30 21:53:58 -05:00
Scott Lahteine
c4fbbcaf46 Lose the old HOMEAXIS macro 2018-06-30 18:07:40 -05:00
Scott Lahteine
ca6ddbc555 Detect endstop hits in any direction 2018-06-30 17:26:49 -05:00
Scott Lahteine
1caa01a9a2 Fix Trigorilla 1.4 pin defines
See #11097
2018-06-30 13:45:41 -05:00
Scott Lahteine
a294ec3836
Add delta feedrate scaling (#11152) 2018-06-30 13:44:37 -05:00
Giuliano
a789ab4005 [1.1.x] Git ignore for VS (#11156)
Add missing VS file
2018-06-30 02:51:20 -05:00
Scott Lahteine
718a22e836 Non-conflicting CS pins for MKS Gen L 2018-06-30 02:35:45 -05:00
Scott Lahteine
be3e006fc8 Fix G33 compile warning 2018-06-29 23:20:59 -05:00
Scott Lahteine
654f0bed25
Remove JUNCTION_DEVIATION_INCLUDE_E option (#11146) 2018-06-29 22:41:56 -05:00
Scott Lahteine
609e7da3f3
Fix and tweak POWER_LOSS_RECOVERY (#11150) 2018-06-29 22:40:49 -05:00
Scott Lahteine
67475374ae Fix SKEW_CORRECTION compile error 2018-06-29 19:37:47 -05:00
Scott Lahteine
485d50ecb0 Ignore Z min endstop with separate Z probe
To allow for the case where a Z endstop (e.g., hall effect) is higher than the probe trigger point, don't check the Z min endstop during probe moves. See #11134
2018-06-28 05:09:45 -05:00
Scott Lahteine
5788a393c0 Fix up microsteps conditionals 2018-06-28 00:07:03 -05:00
Scott Lahteine
5e03dede18 Eliminate stepper.* signed/unsigned warnings 2018-06-27 23:06:49 -05:00
Scott Lahteine
b880028334
Fix stepper/planner block handling, race conditions (#11136)
- Allow planner to alter the deceleration phase of the currently executing block.
- Remove BUSY flag, as it is NON ATOMIC to set bits in the Stepper ISR and Planner at the same time.

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-06-27 18:11:23 -05:00
Scott Lahteine
cff2201629
Poll all endstops, even when stationary (#11125)
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-06-27 04:19:05 -04:00
Scott Lahteine
e352c1e52d Endstop patch followup 2018-06-27 00:12:42 -05:00
Scott Lahteine
04fc715c91
Add minimum step dir delay option, A4988 pulse note (#11122)
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-06-26 22:28:46 -04:00
Scott Lahteine
4d5c655f8d
Make max_e_jerk an array to save CPU (#11121)
Co-Authored-By: gloomyandy <andy-git@gloomy-place.com>
2018-06-26 22:09:38 -04:00
Giuliano
0a2d3ecfd4 [1.1.x] Fix advanced pause init values (#11096)
Fixed for cycle used to initialize default values
2018-06-26 14:38:08 -04:00
Scott Lahteine
8600cbb01b Clear Max7219 without test pattern 2018-06-25 11:54:14 -04:00
Scott Lahteine
dd9c65d0be
[1.1.x] Fix stepper/planner race condition, Stepper pulse timer (#11084)
* Fix planner/stepper race condition

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
Co-Authored-By: AnHardt <github@kitelab.de>

* Fix stepper pulse timing

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-06-22 10:53:46 -04:00
Scott Lahteine
53745446f9 Fix LIN_ADVANCE max_e_jerk_factor
According to https://github.com/MarlinFirmware/Marlin/issues/9917#issuecomment-399204568
2018-06-21 21:38:52 -04:00