Brian
ff5fed137f
Fix BLTOUCH_HEATERS_OFF bug
2017-05-02 15:53:52 -05:00
Scott Lahteine
ac69eca586
Merge pull request #6538 from bgort/ubl_gridlbls
...
Fix, cleanup, prettify `G29 O` output
2017-05-02 14:09:18 -05:00
Scott Lahteine
99b11db1a1
Merge pull request #6537 from thinkyhead/rc_cleanup_sunday
...
Various leveling-related patches
2017-05-02 00:59:59 -05:00
Roxy-3D
41e63bbb7c
Fix Horizontal and Vertical UBL optimization bug. ( #6540 )
...
* Fix Horizontal and Vertical optimization bug.
And drastically reduce the debug code foot print....
* Yeah Baby!
The debug print is going A - OK !
2017-05-01 23:52:33 -05:00
Scott Lahteine
e79b335367
Patches for leveling reactivation in G28 / M48
2017-05-01 17:38:57 -05:00
Brian
92e22c3bf2
Fix, cleanup, prettify G29 O output
2017-05-01 18:19:57 -04:00
Scott Lahteine
7d5cd7e0d7
Tweak set_bed_leveling_enabled
2017-05-01 16:46:52 -05:00
Scott Lahteine
ed81e9b3d3
Adjust leveling conditionals
2017-05-01 16:46:48 -05:00
Scott Lahteine
a64e5659ce
Clean up G26 external references, private vars
2017-05-01 15:17:52 -05:00
Scott Lahteine
2887c20788
Add a function to home all axes (i.e., gcode_G28)
2017-05-01 15:03:37 -05:00
Scott Lahteine
8f895d5e01
Merge pull request #6530 from thinkyhead/rc_cleanups_2
...
Fixes for DUAL_NOZZLE_DUPLICATION_MODE
2017-05-01 12:34:11 -05:00
Scott Lahteine
8002672938
Fixes for DUAL_NOZZLE_DUPLICATION_MODE
2017-05-01 12:20:25 -05:00
Scott Lahteine
f69acde966
Merge pull request #6528 from MarlinFirmware/revert-6416-negative-mesh-fix
...
Revert "Fix for Meshpositions if printer has negative endstop positions"
2017-05-01 11:51:13 -05:00
Scott Lahteine
8bd63aafb9
Merge pull request #6527 from thinkyhead/rc_cleanups_2
...
Patch DELTA_HEIGHT, BLTOUCH init
2017-05-01 11:28:43 -05:00
Scott Lahteine
4803a4322e
Revert "Fix for Meshpositions if printer has negative endstop positions"
2017-05-01 11:25:07 -05:00
Scott Lahteine
4f74c416a4
Patch for BLTOUCH_HEATERS_OFF
2017-05-01 11:13:40 -05:00
Scott Lahteine
1823a6ea29
Patch for missing DELTA_HEIGHT
2017-05-01 11:05:35 -05:00
Scott Lahteine
984c210dec
Merge pull request #6519 from thinkyhead/rc_cleanups_2
...
Various fixes for compiler warnings
2017-05-01 02:46:34 -05:00
Scott Lahteine
d814e468d2
Fix set_heaters_for_bltouch and usage
...
- Only call `set_heaters_for_bltouch` when actually deploying/stowing
- Clear `next_emi_protection` when re-enabling heaters
2017-05-01 02:27:52 -05:00
Brian
4e1448e75a
Various fixes for compiler warnings
...
add BLTouch-related messages in english and (rusty) french;
add missing endstops.h in ultralcd.cpp;
fix misc. compiler warnings;
fix lsf_reset - ZERO macro can't handle a pointer as it would only memset the size of the pointer, not the size of the entire struct
2017-05-01 02:12:40 -05:00
Scott Lahteine
fc9919b749
Merge pull request #6515 from thinkyhead/rc_cleanup_sunday
...
Some minor cleanups to code formatting
2017-04-30 22:58:16 -05:00
Scott Lahteine
c12bc51a59
cardreader.cpp spacing tweak
2017-04-30 22:27:47 -05:00
Scott Lahteine
46b714a52f
Cleanup spacing in pinsDebug.h
2017-04-30 22:27:26 -05:00
Scott Lahteine
88141ca717
Remove things that aren't pins from pinsDebug_list.h
2017-04-30 22:24:51 -05:00
Scott Lahteine
ff35b11d08
Resolve compiler complaint about memset volatile *
2017-04-30 22:24:03 -05:00
Scott Lahteine
ff95a9850a
Merge pull request #6516 from thinkyhead/rc_meaningful_branch_name
...
Need to define this for Rigidboard V2
2017-04-30 22:17:41 -05:00
Scott Lahteine
0b421e97c9
Rename some (unused) OMCA pins
2017-04-30 22:16:44 -05:00
Scott Lahteine
c2c9f01c8e
Patch newly-introduced bug in IS_Z2_OR_PROBE
2017-04-30 20:17:10 -05:00
Scott Lahteine
819df5e06d
Cleanups to pins debugging
2017-04-30 20:17:10 -05:00
Scott Lahteine
42824b0e1f
Use new serial spacing function to save PROGMEM
2017-04-30 20:14:42 -05:00
Scott Lahteine
cd72901fb7
Cleanups to UBL code
2017-04-30 20:14:42 -05:00
jaysonkelly
769817ce5e
Need to define this for Rigidboard V2
...
Motor current defaults need to be defined for Rigidboard
2017-04-30 19:04:27 -05:00
Scott Lahteine
39c6c5621b
Merge pull request #6416 from SkyNet3D/negative-mesh-fix
...
Fix for Meshpositions if printer has negative endstop positions
2017-04-30 17:38:41 -05:00
Scott Lahteine
671a44b8aa
Merge pull request #6410 from teemuatlut/LVD-Delta
...
Delta auto-calibration updates
2017-04-30 16:39:51 -05:00
Scott Lahteine
5d5c9a040a
Merge pull request #6509 from thinkyhead/rc_config_patches
...
Configuration cleanup
2017-04-30 16:10:27 -05:00
Scott Lahteine
d480b6f75a
Enable E1 stepper for DUAL_NOZZLE_DUPLICATION_MODE
2017-04-30 16:01:01 -05:00
Scott Lahteine
54751e8557
Put DISTINCT_E_FACTORS adjacent to the affected settings
2017-04-30 15:30:31 -05:00
Scott Lahteine
0dbe4b3e54
Edit configurations to reduce verbosity, arrange logically
2017-04-30 15:30:31 -05:00
Scott Lahteine
0750933bc6
Merge pull request #6490 from Bob-the-Kuhn/Missing-X-stop
...
Endstop not enabled if pin is zero
2017-04-30 15:09:36 -05:00
bgort
5ace3699b1
Output (commented) coordinates on G29 S-1; helps identify the x/y points that correspond with i/j coordinates, which eases manual tweaking of z values ( #6507 )
2017-04-30 14:59:34 -05:00
Scott Lahteine
d7d4378481
Remove inaccurate version description
2017-04-30 14:57:19 -05:00
Scott Lahteine
f169c04604
Merge pull request #6491 from thinkyhead/rc_cleanup_wednesday
...
Various cleanups for recent merges
2017-04-30 14:56:48 -05:00
Scott Lahteine
6d63255ddc
Merge pull request #6508 from bgort/pio_improvements
...
PlatformIO-related improvement
2017-04-30 14:53:22 -05:00
LVD-AC
cafc48dff8
little oops
2017-04-30 22:17:49 +03:00
Brian
627730948d
Add U8glib as a dependency to platformio.ini for those who use PlatformIO; this makes compiling even easier as u8glib will be downloaded and included automatically.
...
Also added the new .pio-related directory to .gitignore, and a few ignores for those who use cmake.
2017-04-30 15:13:51 -04:00
bgort
5974d8e168
change G26 default nozzle size to 0.4, consistent with instructions ( #6506 )
2017-04-30 13:23:46 -05:00
LVD-AC
471a321624
leaner code for probe routine
2017-04-30 19:15:16 +03:00
bgort
3c0d5ba0a1
allow idle() to be called - fixes sometimes crash/hang in G29 I; ( #6505 )
2017-04-30 10:22:31 -05:00
Roxy-3D
2509587b5a
Correct over optimization of pre-initialized variables ( #6500 )
...
* Correct over optimization of pre-initialized variables
NEAR_ZERO() works most of the time... But it leaves corner cases
uncovered. We need to explicitly check if these variables are +/-
infinity.
* Correct over optimization of pre-initialized variables
2017-04-29 22:01:29 -05:00
LVD-AC
585c00a728
Proposed changes
...
This is what I did yesterday:
- basicly gave the tests more comprehensive names; put all the
declarations at the top; got rid of the magic negative C-value (renamed
to P + A, O, T)
- "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 :
-1)) * delta_calibration_radius" compiles wrong is zig_zag statement is
without brackets
- DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value
to normalize will not compile otherwise)
-Wrote 3 dummies to keep EEPROM lenght the same
-Reset the configs to the 'original' with autocal + menu disabled (but
can be enabled of course)
2017-04-29 18:53:14 +03:00
