Firmware/Marlin/example_configurations/Hephestos_2
Bob-the-Kuhn 0934563b97 G38 optional double touch
Made the double touch portion a conditional compile based on the
PROBE_DOUBLE_TOUCH flag.

==============================================

Bugfix

The current G38 only stopped a move if it involved the Z axis.

Moved all the G38 code to it's own section and put it where it would
always be executed no matter what axis was moving or if the endstop was
enabled.

Also added a comment to configuration_adv to alert the user the double
tap had to be turned on.

==============================================

Change G38 back to using Z_MIN_PROBE

There's no Z_MIN endstop if Z_DUAL_ENDSTOPS is enabled and you have them
set to the top of the gantry.

G38 started out as using the Z_MIN_PROBE pin.  I don't remember why we
changed it to the Z_MIN endstop.
2017-03-22 15:08:49 -05:00
..
_Bootscreen.h Updates u8glib's bmp2hex converter 2016-07-19 03:16:30 +01:00
Configuration_adv.h G38 optional double touch 2017-03-22 15:08:49 -05:00
Configuration.h Patch configs UBL followup 2017-03-18 12:32:03 -05:00
README.md Updated bq Hephestos 2 example configuration 2016-12-13 09:26:07 +00:00

Example Configuration for BQ Hephestos 2

This configuration file is based on the original configuration file shipped with the heavily modified Marlin fork by BQ. The original firmware and configuration file can be found at BQ Github repository.

NOTE: The look and feel of the Hephestos 2 while navigating the LCD menu will change by using the original Marlin firmware.

Changelog

  • 2016/03/01 - Initial release
  • 2016/03/21 - Activated 4-point auto leveling by default Updated miscellaneous z-probe values
  • 2016/06/21 - Disabled hot bed related options Activated software endstops SD printing now disables the heater when finished
  • 2016/07/13 - Update the DEFAULT_AXIS_STEPS_PER_UNIT for the Z axis Increased the DEFAULT_XYJERK
  • 2016/12/13 - Configuration updated.