| .. |
|
example_configurations
|
Cyclops has SINGLENOZZLE and higher temp
|
2018-02-08 19:07:43 -06:00 |
|
bitmap_flags.h
|
Parity with 2.0.x bitmap functions
|
2017-11-25 19:56:22 -06:00 |
|
blinkm.cpp
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
blinkm.h
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
boards.h
|
[1.1.x] Support for the Anycubic Trigorilla Board (1.3 at least) (#8367)
|
2018-02-09 05:38:21 -06:00 |
|
buzzer.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
|
cardreader.cpp
|
Move some strings to PROGMEM
|
2018-01-23 23:50:42 -06:00 |
|
cardreader.h
|
SD Menu patches
|
2017-11-26 01:10:06 -06:00 |
|
circularqueue.h
|
|
|
|
Conditionals_LCD.h
|
Special override of LCD_WIDTH
|
2018-02-07 22:16:07 -06:00 |
|
Conditionals_post.h
|
[1.1.x] Enable Z axis and delta sensorless homing (#9532)
|
2018-02-08 02:02:48 -06:00 |
|
Conditionals.h
|
|
|
|
Configuration_adv.h
|
Followup to #9532
|
2018-02-08 03:39:20 -06:00 |
|
configuration_store.cpp
|
[1.1.x] Enable Z axis and delta sensorless homing (#9532)
|
2018-02-08 02:02:48 -06:00 |
|
configuration_store.h
|
UBL G29 works without settings.load
|
2018-01-05 15:47:52 -06:00 |
|
Configuration.h
|
Enable and disable power supply automatically
|
2018-02-06 00:20:33 -06:00 |
|
dac_mcp4728.cpp
|
Apply standards for whole-file conditions
|
2018-02-04 21:17:03 -06:00 |
|
dac_mcp4728.h
|
|
|
|
digipot_mcp4018.cpp
|
|
|
|
digipot_mcp4451.cpp
|
|
|
|
dogm_bitmaps.h
|
Fix up _Bootscreen.h and _Statusscreen.h
|
2018-02-02 00:55:02 -06:00 |
|
dogm_font_data_6x9_marlin.h
|
|
|
|
dogm_font_data_HD44780_C.h
|
|
|
|
dogm_font_data_HD44780_J.h
|
|
|
|
dogm_font_data_HD44780_W.h
|
|
|
|
dogm_font_data_ISO10646_1_PL.h
|
|
|
|
dogm_font_data_ISO10646_1_tr.h
|
|
|
|
dogm_font_data_ISO10646_1.h
|
Fix non-extended font option
|
2017-11-06 21:43:18 -06:00 |
|
dogm_font_data_ISO10646_5_Cyrillic.h
|
|
|
|
dogm_font_data_ISO10646_CN.h
|
|
|
|
dogm_font_data_ISO10646_CZ.h
|
|
|
|
dogm_font_data_ISO10646_Greek.h
|
|
|
|
dogm_font_data_ISO10646_Kana.h
|
|
|
|
dogm_font_data_ISO10646_SK.h
|
Added Slovak C2C3C4 mapper implementation.
|
2017-10-06 14:40:15 -05:00 |
|
dogm_font_data_Marlin_symbols.h
|
|
|
|
duration_t.h
|
Fix toDigital length with days
|
2018-01-21 02:50:54 -06:00 |
|
endstop_interrupts.h
|
General code/bitmaps cleanup
|
2017-12-13 17:57:54 -06:00 |
|
endstops.cpp
|
Move SET_BIT macro to endstops.cpp and simplify
|
2018-02-02 00:50:29 -06:00 |
|
endstops.h
|
Set initial endstops state
|
2017-12-05 01:08:39 -06:00 |
|
enum.h
|
Apply feedrate to nozzle movement for kinematic machines
|
2018-02-03 22:17:13 -06:00 |
|
fastio_168.h
|
|
|
|
fastio_644.h
|
|
|
|
fastio_1280.h
|
|
|
|
fastio_1281.h
|
|
|
|
fastio_AT90USB.h
|
|
|
|
fastio.h
|
Add pin_t to Marln 1.1 branch
|
2018-02-08 21:01:41 -06:00 |
|
fwretract.cpp
|
Correct some retract() comments
|
2018-02-08 17:56:53 -06:00 |
|
fwretract.h
|
Make FWRetract class for 2.0.x parity
|
2018-01-04 17:54:24 -06:00 |
|
G26_Mesh_Validation_Tool.cpp
|
Add a proper comment for G26
|
2018-02-06 00:59:54 -06:00 |
|
gcode.cpp
|
Simplify G-code debug option
|
2018-01-23 23:50:42 -06:00 |
|
gcode.h
|
Parser followup patch
|
2018-02-01 23:25:22 -06:00 |
|
hex_print_routines.cpp
|
Patch hex_print_routines.* include order
|
2018-02-05 17:05:26 -06:00 |
|
hex_print_routines.h
|
Patch hex_print_routines.* include order
|
2018-02-05 17:05:26 -06:00 |
|
I2CPositionEncoder.cpp
|
I2C position encoders update
|
2018-02-08 02:46:12 -06:00 |
|
I2CPositionEncoder.h
|
I2C position encoders update
|
2018-02-08 02:46:12 -06:00 |
|
language_an.h
|
Apply feedrate to nozzle movement for kinematic machines
|
2018-02-03 22:17:13 -06:00 |
|
language_bg.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_ca.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_cn.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_cz_utf8.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_cz.h
|
Language updates for parity
|
2018-02-03 22:48:06 -06:00 |
|
language_da.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_de.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_el-gr.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_el.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_en.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_es.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_eu.h
|
update eu language
|
2018-02-07 01:12:37 +01:00 |
|
language_fi.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_fr_utf8.h
|
Apply feedrate to nozzle movement for kinematic machines
|
2018-02-03 22:17:13 -06:00 |
|
language_fr.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_gl.h
|
Apply feedrate to nozzle movement for kinematic machines
|
2018-02-03 22:17:13 -06:00 |
|
language_hr.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_it.h
|
Fix italian translation
|
2018-02-06 15:09:06 +01:00 |
|
language_kana_utf8.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_kana.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_nl.h
|
Apply feedrate to nozzle movement for kinematic machines
|
2018-02-03 22:17:13 -06:00 |
|
language_pl-DOGM.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_pl-HD44780.h
|
Apply feedrate to nozzle movement for kinematic machines
|
2018-02-03 22:17:13 -06:00 |
|
language_pl.h
|
Update links to old wiki page
|
2017-09-23 22:06:45 -05:00 |
|
language_pt_utf8.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_pt-br_utf8.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_pt-br.h
|
Apply feedrate to nozzle movement for kinematic machines
|
2018-02-03 22:17:13 -06:00 |
|
language_pt.h
|
Apply feedrate to nozzle movement for kinematic machines
|
2018-02-03 22:17:13 -06:00 |
|
language_ru.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_sk_utf8.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_test.h
|
Update links to old wiki page
|
2017-09-23 22:06:45 -05:00 |
|
language_tr.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_uk.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_zh_CN.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_zh_TW.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language.h
|
Minor changes for 2.0.x parity
|
2018-02-08 22:20:31 -06:00 |
|
least_squares_fit.cpp
|
|
|
|
least_squares_fit.h
|
|
|
|
leds.cpp
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
leds.h
|
Use NEOPIXEL as case light
|
2018-01-20 16:57:04 -06:00 |
|
M100_Free_Mem_Chk.cpp
|
M100 comment
|
2018-02-05 21:53:21 -06:00 |
|
macros.h
|
Apply feedrate to nozzle movement for kinematic machines
|
2018-02-03 22:17:13 -06:00 |
|
Makefile
|
Creality Ender support.
|
2018-01-15 03:39:43 -06:00 |
|
malyanlcd.cpp
|
Clean trailing space
|
2018-02-07 02:40:41 -06:00 |
|
Marlin_main.cpp
|
Merge pull request #9548 from thinkyhead/bf1_prevent_comments_resetting
|
2018-02-09 07:15:10 -06:00 |
|
Marlin.h
|
Add pin_t to Marln 1.1 branch
|
2018-02-08 21:01:41 -06:00 |
|
Marlin.ino
|
Marlin.ino needs no content
|
2018-02-06 01:09:51 -06:00 |
|
MarlinConfig.h
|
Updates to TMC support
|
2018-01-10 04:32:49 -06:00 |
|
MarlinSerial.cpp
|
Better handle serial over runs...
|
2018-01-18 16:51:27 -06:00 |
|
MarlinSerial.h
|
Remove redundant serial sanity check
|
2017-12-19 19:07:20 -06:00 |
|
MarlinSPI.h
|
Add / use 32-bit wide bit macros
|
2018-02-01 21:47:23 -06:00 |
|
Max7219_Debug_LEDs.cpp
|
Apply coding standards to Max7219 code
|
2017-11-17 15:33:55 -06:00 |
|
Max7219_Debug_LEDs.h
|
Initial conflict resolution of SD_REPRINT_LAST_SELECTED_FILE (#8104)
|
2017-10-26 11:44:55 -05:00 |
|
mesh_bed_leveling.cpp
|
Make mbl.has_mesh() a method
|
2018-01-07 18:14:37 -06:00 |
|
mesh_bed_leveling.h
|
Make mbl.has_mesh() a method
|
2018-01-07 18:14:37 -06:00 |
|
neopixel.cpp
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
neopixel.h
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
nozzle.cpp
|
[1.1.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8864)
|
2017-12-24 23:47:05 -06:00 |
|
nozzle.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
|
pca9632.cpp
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
pca9632.h
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
pins_3DRAG.h
|
|
|
|
pins_5DPRINT.h
|
removed execution mode from files
|
2018-01-24 00:17:34 -06:00 |
|
pins_ANET_10.h
|
Adding support for the Tronxy and Zonestar LCD
|
2017-12-15 19:13:31 -06:00 |
|
pins_AZTEEG_X1.h
|
|
|
|
pins_AZTEEG_X3_PRO.h
|
|
|
|
pins_AZTEEG_X3.h
|
Apply some tweaks based on 2.0.x
|
2017-10-09 17:39:03 -05:00 |
|
pins_BAM_DICE_DUE.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_BQ_ZUM_MEGA_3D.h
|
|
|
|
pins_BRAINWAVE_PRO.h
|
removed execution mode from files
|
2018-01-24 00:17:34 -06:00 |
|
pins_BRAINWAVE.h
|
removed execution mode from files
|
2018-01-24 00:17:34 -06:00 |
|
pins_CHEAPTRONIC.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
|
pins_CHEAPTRONICv2.h
|
Whitespace cleanup
|
2018-01-05 10:19:15 -06:00 |
|
pins_CNCONTROLS_11.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
|
pins_CNCONTROLS_12.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
|
pins_CREALITY_ENDER.h
|
Creality Ender support.
|
2018-01-15 03:39:43 -06:00 |
|
pins_ELEFU_3.h
|
|
|
|
pins_FELIX2.h
|
|
|
|
pins_GEN3_MONOLITHIC.h
|
|
|
|
pins_GEN3_PLUS.h
|
|
|
|
pins_GEN6_DELUXE.h
|
|
|
|
pins_GEN6.h
|
Minor patches to pins files
|
2017-08-23 18:32:59 -05:00 |
|
pins_GEN7_12.h
|
|
|
|
pins_GEN7_13.h
|
|
|
|
pins_GEN7_14.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN7_CUSTOM.h
|
|
|
|
pins_GT2560_REV_A_PLUS.h
|
Fix GT2560 A+ servo pins
|
2017-12-25 02:20:13 -06:00 |
|
pins_GT2560_REV_A.h
|
Fix GT2560 A+ servo pins
|
2017-12-25 02:20:13 -06:00 |
|
pins_K8200.h
|
|
|
|
pins_K8400.h
|
|
|
|
pins_LEAPFROG.h
|
|
|
|
pins_MAKEBOARD_MINI.h
|
Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 (#8041)
|
2017-10-21 00:24:22 -05:00 |
|
pins_MEGACONTROLLER.h
|
|
|
|
pins_MEGATRONICS_2.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
|
pins_MEGATRONICS_3.h
|
Use MB() for Megatronics 3.1
|
2017-12-08 23:39:47 -06:00 |
|
pins_MEGATRONICS.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
|
pins_MELZI_CREALITY.h
|
Whitespace clean
|
2017-12-06 16:19:49 -06:00 |
|
pins_MELZI_MAKR3D.h
|
|
|
|
pins_MELZI_MALYAN.h
|
[1.1.x] Fix support for Malyan M150 (#9146)
|
2018-01-12 01:14:07 -06:00 |
|
pins_MELZI.h
|
|
|
|
pins_MIGHTYBOARD_REVE.h
|
Fix TEMP_BED_PIN for Mightyboard Rev.E
|
2017-12-07 21:52:43 -06:00 |
|
pins_MINIRAMBO.h
|
Board definition and PIN assignments for Mini RAMBo1.0a
|
2017-12-08 23:41:34 -06:00 |
|
pins_MINITRONICS.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
|
pins_MKS_13.h
|
MKS 1.3+: Add pin mapping for PS_ON
|
2017-07-21 18:50:05 -05:00 |
|
pins_MKS_BASE.h
|
Whitespace cleanup
|
2018-01-05 10:19:15 -06:00 |
|
pins_MKS_GEN_L.h
|
Added MKS GEN L board (#8088)
|
2017-10-27 02:13:41 -05:00 |
|
pins_OMCA_A.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_OMCA.h
|
|
|
|
pins_PRINTRBOARD_REVF.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
|
pins_PRINTRBOARD.h
|
removed execution mode from files
|
2018-01-24 00:17:34 -06:00 |
|
pins_RAMBO.h
|
Minor comment/condition cleanup
|
2018-02-09 00:53:04 -06:00 |
|
pins_RAMPS_13.h
|
|
|
|
pins_RAMPS_OLD.h
|
|
|
|
pins_RAMPS_PLUS.h
|
Adding support for using the MKS_12864OLED with the SSD1306 controller
|
2017-12-16 17:44:34 -06:00 |
|
pins_RAMPS.h
|
Changed software serial pins to enable R/W access to TMC2208 drivers
|
2018-02-07 09:52:49 +01:00 |
|
pins_RIGIDBOARD_V2.h
|
|
|
|
pins_RIGIDBOARD.h
|
|
|
|
pins_RUMBA.h
|
|
|
|
pins_SAINSMART_2IN1.h
|
|
|
|
pins_SANGUINOLOLU_11.h
|
Creality Ender support.
|
2018-01-15 03:39:43 -06:00 |
|
pins_SANGUINOLOLU_12.h
|
|
|
|
pins_SAV_MKI.h
|
removed execution mode from files
|
2018-01-24 00:17:34 -06:00 |
|
pins_SCOOVO_X9H.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
|
pins_SETHI.h
|
|
|
|
pins_SILVER_GATE.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
|
pins_STB_11.h
|
Tweak Sanguinololu-related pins files
|
2017-08-23 18:32:59 -05:00 |
|
pins_TEENSY2.h
|
removed execution mode from files
|
2018-01-24 00:17:34 -06:00 |
|
pins_TEENSYLU.h
|
removed execution mode from files
|
2018-01-24 00:17:34 -06:00 |
|
pins_TRIGORILLA.h
|
[1.1.x] Support for the Anycubic Trigorilla Board (1.3 at least) (#8367)
|
2018-02-09 05:38:21 -06:00 |
|
pins_ULTIMAIN_2.h
|
|
|
|
pins_ULTIMAKER_OLD.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
|
pins_ULTIMAKER.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
|
pins_ZRIB_V20.h
|
|
|
|
pins.h
|
[1.1.x] Support for the Anycubic Trigorilla Board (1.3 at least) (#8367)
|
2018-02-09 05:38:21 -06:00 |
|
pinsDebug_list.h
|
Update pins.h for parity, protect MS pins
|
2018-01-22 02:19:04 -06:00 |
|
pinsDebug_plus_70.h
|
Support for SilverGate Board
|
2017-10-31 15:26:27 -05:00 |
|
pinsDebug_Teensyduino.h
|
|
|
|
pinsDebug.h
|
Add pin_t to Marln 1.1 branch
|
2018-02-08 21:01:41 -06:00 |
|
planner_bezier.cpp
|
Apply standards for whole-file conditions
|
2018-02-04 21:17:03 -06:00 |
|
planner_bezier.h
|
Append units to feedrate variables
|
2016-07-17 13:29:41 -07:00 |
|
planner.cpp
|
Enable and disable power supply automatically
|
2018-02-06 00:20:33 -06:00 |
|
planner.h
|
Apply feedrate to nozzle movement for kinematic machines
|
2018-02-03 22:17:13 -06:00 |
|
point_t.h
|
Cleanup Nozzle class, fix XY vs Z move order
|
2017-11-05 18:14:18 -06:00 |
|
power.cpp
|
Fix HAS_CONTROLLER_FAN in is_power_needed
|
2018-02-09 03:33:45 -06:00 |
|
power.h
|
Enable and disable power supply automatically
|
2018-02-06 00:20:33 -06:00 |
|
printcounter.cpp
|
Apply standards for whole-file conditions
|
2018-02-04 21:17:03 -06:00 |
|
printcounter.h
|
|
|
|
SanityCheck.h
|
Sanity check for SERIAL_PORT
|
2018-02-09 00:41:39 -06:00 |
|
Sd2Card.cpp
|
Add pin_t to Marln 1.1 branch
|
2018-02-08 21:01:41 -06:00 |
|
Sd2Card.h
|
Add pin_t to Marln 1.1 branch
|
2018-02-08 21:01:41 -06:00 |
|
SdBaseFile.cpp
|
[1.1.x] Fix SD wrong filename list (#9343)
|
2018-01-24 23:07:58 -06:00 |
|
SdBaseFile.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdFatConfig.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdFatStructs.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdFatUtil.cpp
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdFatUtil.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdFile.cpp
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdFile.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdInfo.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdVolume.cpp
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdVolume.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
serial.cpp
|
|
|
|
serial.h
|
Fix compile with BLUETOOTH
|
2018-02-07 18:06:26 -06:00 |
|
servo.cpp
|
|
|
|
servo.h
|
|
|
|
softspi.h
|
|
|
|
speed_lookuptable.h
|
Minimal include for speed_lookuptable
|
2017-12-05 21:44:59 -06:00 |
|
stepper_dac.cpp
|
Move some strings to PROGMEM
|
2018-01-23 23:50:42 -06:00 |
|
stepper_dac.h
|
Apply const to axis args
|
2017-12-11 00:20:29 -06:00 |
|
stepper_indirection.cpp
|
Add TMC software SPI (#9362)
|
2018-02-02 03:56:08 -06:00 |
|
stepper_indirection.h
|
[1.1.x] TMC driver update (#8712)
|
2017-12-15 15:02:39 -06:00 |
|
stepper.cpp
|
Drop ubl.h include from steppers.cpp
|
2018-02-07 22:16:07 -06:00 |
|
stepper.h
|
Revert "[Bugfix-1.1.x] initial step correction (#8735)"
|
2017-12-17 02:04:44 -06:00 |
|
stopwatch.cpp
|
|
|
|
stopwatch.h
|
|
|
|
temperature.cpp
|
Add pin_t to Marln 1.1 branch
|
2018-02-08 21:01:41 -06:00 |
|
temperature.h
|
Add pin_t to Marln 1.1 branch
|
2018-02-08 21:01:41 -06:00 |
|
thermistornames.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_1.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_2.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_3.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_4.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_5.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_6.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_7.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_8.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_9.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_10.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_11.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_12.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_13.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_15.h
|
Add thermistor 15 tuned for JGAurora A5
|
2018-01-21 16:57:47 -06:00 |
|
thermistortable_20.h
|
Add OV() macro for thermistor tables
|
2017-11-15 03:20:36 -06:00 |
|
thermistortable_51.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_52.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_55.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_60.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_66.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_70.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_71.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_75.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_110.h
|
|
|
|
thermistortable_147.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_998.h
|
Add OV() macro for thermistor tables
|
2017-11-15 03:20:36 -06:00 |
|
thermistortable_999.h
|
Add OV() macro for thermistor tables
|
2017-11-15 03:20:36 -06:00 |
|
thermistortable_1010.h
|
|
|
|
thermistortable_1047.h
|
|
|
|
thermistortables.h
|
Add thermistor 15 tuned for JGAurora A5
|
2018-01-21 16:57:47 -06:00 |
|
tmc_util.cpp
|
[1.1.x] Enable Z axis and delta sensorless homing (#9532)
|
2018-02-08 02:02:48 -06:00 |
|
tmc_util.h
|
Updates to TMC support
|
2018-01-10 04:32:49 -06:00 |
|
twibus.cpp
|
Apply standards for whole-file conditions
|
2018-02-04 21:17:03 -06:00 |
|
twibus.h
|
|
|
|
types.h
|
Make G26 work with all mesh leveling.
|
2017-11-23 21:41:27 -06:00 |
|
ubl_G29.cpp
|
Export more in ultralcd.h
|
2018-02-04 21:17:03 -06:00 |
|
ubl_motion.cpp
|
Comment return false in motion functions
|
2017-12-24 22:56:56 -06:00 |
|
ubl.cpp
|
Apply standards for whole-file conditions
|
2018-02-04 21:17:03 -06:00 |
|
ubl.h
|
PronterFace M105 work around (#9227)
|
2018-01-17 22:51:19 -06:00 |
|
ultralcd_impl_DOGM.h
|
[1.1.x] Fix compile warning (#9540)
|
2018-02-08 17:59:24 -06:00 |
|
ultralcd_impl_HD44780.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
|
ultralcd_st7565_u8glib_VIKI.h
|
Support for SilverGate Board
|
2017-10-31 15:26:27 -05:00 |
|
ultralcd_st7920_u8glib_rrd.h
|
Support for SilverGate Board
|
2017-10-31 15:26:27 -05:00 |
|
ultralcd.cpp
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
ultralcd.h
|
Implement MALYAN_LCD
|
2018-02-04 21:18:49 -06:00 |
|
utf_mapper.h
|
Tweak spacing in utf8_mapper.h
|
2017-10-06 15:11:27 -05:00 |
|
utility.cpp
|
Patch utility for debug-leveling
|
2018-02-07 22:43:51 -06:00 |
|
utility.h
|
Patch utility for debug-leveling
|
2018-02-07 22:43:51 -06:00 |
|
vector_3.cpp
|
Apply standards for whole-file conditions
|
2018-02-04 21:17:03 -06:00 |
|
vector_3.h
|
Add a struct defining EEPROM storage
|
2018-01-05 15:47:51 -06:00 |
|
Version.h
|
Date refresh
|
2018-01-20 09:17:00 -06:00 |
|
watchdog.cpp
|
Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR
|
2017-11-03 04:45:13 +01:00 |
|
watchdog.h
|
|
|
