MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
Firmware/Marlin
History
GMagician b96ceb4256 [1.1.x] tool change bad behaviours 
This PR will address two issues reported in #8492. Just one is left because I don't know if it is an issue or not

1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
2) Since no move no bed level matrix should be applied
    When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
2017-11-20 16:39:32 -06:00
..
example_configurations
Update Configuration.h
2017-11-16 23:18:55 -06:00
blinkm.cpp
…
blinkm.h
…
boards.h
Restore MKS_GEN_L
2017-11-02 12:14:54 -04:00
buzzer.h
Spacing, const, comments
2017-06-07 16:07:38 -05:00
cardreader.cpp
Apply SDCARD_SORT_ALPHA changes from 2.0.x
2017-11-15 01:09:13 -06:00
cardreader.h
Apply SDCARD_SORT_ALPHA changes from 2.0.x
2017-11-15 01:09:13 -06:00
circularqueue.h
…
Conditionals_LCD.h
Patch G33 misuse of PROBE_MANUALLY
2017-11-07 22:28:54 -06:00
Conditionals_post.h
Update the UBL Probable Area for Delta's
2017-11-17 16:41:31 -06:00
Conditionals.h
…
Configuration_adv.h
Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:06:35 -06:00
configuration_store.cpp
No retroactive changes with M851 Z
2017-11-18 03:37:07 -06:00
configuration_store.h
Expose DISABLE_M503 option as a test option
2017-07-01 21:31:28 -05:00
Configuration.h
Move Filament Width Sensor to Configuration_adv.h
2017-11-13 21:06:40 -06:00
dac_mcp4728.cpp
Fix get/setDrvPct declarations
2017-06-09 20:21:28 -07:00
dac_mcp4728.h
Fix get/setDrvPct declarations
2017-06-09 20:21:28 -07:00
digipot_mcp4018.cpp
Fix: set digipot mcp4018 Vrefmax to 1.666V
2017-06-24 12:35:34 -05:00
digipot_mcp4451.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
dogm_bitmaps.h
Added option for graphical overlay for Z-offset
2017-08-31 14:21:39 -06:00
dogm_font_data_6x9_marlin.h
…
dogm_font_data_HD44780_C.h
…
dogm_font_data_HD44780_J.h
…
dogm_font_data_HD44780_W.h
…
dogm_font_data_ISO10646_1_PL.h
…
dogm_font_data_ISO10646_1_tr.h
…
dogm_font_data_ISO10646_1.h
Fix non-extended font option
2017-11-06 21:43:18 -06:00
dogm_font_data_ISO10646_5_Cyrillic.h
…
dogm_font_data_ISO10646_CN.h
…
dogm_font_data_ISO10646_CZ.h
UTF-8 mapper for Czech
2017-07-04 15:51:23 -05:00
dogm_font_data_ISO10646_Greek.h
…
dogm_font_data_ISO10646_Kana.h
…
dogm_font_data_ISO10646_SK.h
Added Slovak C2C3C4 mapper implementation.
2017-10-06 14:40:15 -05:00
dogm_font_data_Marlin_symbols.h
…
duration_t.h
…
endstop_interrupts.h
Implement support for Dual X and Y endstops
2017-10-29 03:49:45 -05:00
endstops.cpp
Implement support for Dual X and Y endstops
2017-10-29 03:49:45 -05:00
endstops.h
Implement support for Dual X and Y endstops
2017-10-29 03:49:45 -05:00
enum.h
Implement support for Dual X and Y endstops
2017-10-29 03:49:45 -05:00
fastio_168.h
Split up fastio.h, document pin mappings
2017-05-21 10:33:27 -05:00
fastio_644.h
Split up fastio.h, document pin mappings
2017-05-21 10:33:27 -05:00
fastio_1280.h
Split up fastio.h, document pin mappings
2017-05-21 10:33:27 -05:00
fastio_1281.h
Split up fastio.h, document pin mappings
2017-05-21 10:33:27 -05:00
fastio_AT90USB.h
Tweaks for M43
2017-07-06 21:47:50 -05:00
fastio.h
Drop fastio timer cruft
2017-06-15 14:43:40 -05:00
G26_Mesh_Validation_Tool.cpp
Move mesh test options under G26 option
2017-11-13 21:06:40 -06:00
gcode.cpp
Fix parser value handling
2017-11-14 23:23:22 -06:00
gcode.h
Add pre-calculated planner.e_factor
2017-11-10 20:09:59 -06:00
hex_print_routines.cpp
New GCode Parser - Implementation
2017-05-23 14:15:10 -05:00
hex_print_routines.h
New GCode Parser - Implementation
2017-05-23 14:15:10 -05:00
I2CPositionEncoder.cpp
Followup for I2C_POSITION_ENCODERS
2017-06-27 20:46:40 -05:00
I2CPositionEncoder.h
Remove I2CPEM workspace offset
2017-11-04 22:00:45 -05:00
language_an.h
Fix non-extended font option
2017-11-06 21:43:18 -06:00
language_bg.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_ca.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_cn.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_cz_utf8.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_cz.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_da.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_de.h
Length fix and translation
2017-11-07 18:16:30 +01:00
language_el-gr.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_el.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_en.h
Fix non-extended font option
2017-11-06 21:43:18 -06:00
language_es.h
Fix non-extended font option
2017-11-06 21:43:18 -06:00
language_eu.h
Fix non-extended font option
2017-11-06 21:43:18 -06:00
language_fi.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_fr_utf8.h
give this language an unique name
2017-10-26 15:48:00 -05:00
language_fr.h
Fix non-extended font option
2017-11-06 21:43:18 -06:00
language_gl.h
Fix non-extended font option
2017-11-06 21:43:18 -06:00
language_hr.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_it.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_kana_utf8.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_kana.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_nl.h
Fix non-extended font option
2017-11-06 21:43:18 -06:00
language_pl-DOGM.h
Add some Polish translations
2017-10-26 22:44:23 -05:00
language_pl-HD44780.h
Fix non-extended font option
2017-11-06 21:43:18 -06:00
language_pl.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_pt_utf8.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_pt-br_utf8.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_pt-br.h
Fix non-extended font option
2017-11-06 21:43:18 -06:00
language_pt.h
Fix non-extended font option
2017-11-06 21:43:18 -06:00
language_ru.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_sk_utf8.h
Added Slovak C2C3C4 mapper implementation.
2017-10-06 14:40:15 -05:00
language_test.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_tr.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_uk.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_zh_CN.h
Update links to old wiki page
2017-09-23 22:06:45 -05:00
language_zh_TW.h
Updates Traditional Chinese, rebase for bugfix-1.1.x
2017-11-10 04:49:09 -06:00
language.h
Allow asterisks in G-Code commands
2017-10-31 21:14:56 -05:00
least_squares_fit.cpp
Apply coding standards to recent merges
2017-07-13 00:46:16 -05:00
least_squares_fit.h
Apply coding standards to recent merges
2017-07-13 00:46:16 -05:00
M100_Free_Mem_Chk.cpp
Apply const, spacing, etc.
2017-06-27 05:23:49 -05:00
macros.h
Update macros for parity with 2.0.x
2017-11-10 04:32:27 -06:00
Makefile
Add Max7219 LED Matrix Debug Support (#7563)
2017-08-25 17:03:07 -05:00
Marlin_main.cpp
[1.1.x] tool change bad behaviours
2017-11-20 16:39:32 -06:00
Marlin.h
No retroactive changes with M851 Z
2017-11-18 03:37:07 -06:00
Marlin.ino
…
MarlinConfig.h
…
MarlinSerial.cpp
Fix Emergency Parser
2017-10-14 15:58:07 -05:00
MarlinSerial.h
Tweak spacing in utf8_mapper.h
2017-10-06 15:11:27 -05:00
MarlinSPI.h
Fix PlatformIO dependencies
2017-11-16 15:16:21 -06:00
Max7219_Debug_LEDs.cpp
Apply coding standards to Max7219 code
2017-11-17 15:33:55 -06:00
Max7219_Debug_LEDs.h
Initial conflict resolution of SD_REPRINT_LAST_SELECTED_FILE (#8104)
2017-10-26 11:44:55 -05:00
mesh_bed_leveling.cpp
Move fade_scaling_factor_for_z to Planner
2017-10-14 02:10:46 -05:00
mesh_bed_leveling.h
Move fade_scaling_factor_for_z to Planner
2017-10-14 02:10:46 -05:00
nozzle.cpp
Fix point_t pointer in Nozzle::zigzag
2017-11-05 18:32:32 -06:00
nozzle.h
Cleanup Nozzle class, fix XY vs Z move order
2017-11-05 18:14:18 -06:00
pca9632.cpp
Fix hexadecimal number formatting
2017-08-14 22:50:44 -05:00
pca9632.h
PCA9632 PWM color LED support
2017-06-12 01:09:24 -05:00
pins_3DRAG.h
…
pins_5DPRINT.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_ANET_10.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_AZTEEG_X1.h
Tweak Sanguinololu-related pins files
2017-08-23 18:32:59 -05:00
pins_AZTEEG_X3_PRO.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_AZTEEG_X3.h
Apply some tweaks based on 2.0.x
2017-10-09 17:39:03 -05:00
pins_BAM_DICE_DUE.h
…
pins_BQ_ZUM_MEGA_3D.h
Add support for BQ heated bed kit with Hephestos 2
2017-07-07 03:10:38 -05:00
pins_BRAINWAVE_PRO.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_BRAINWAVE.h
Remove extraneous USBCON defines for AT90USB boards
2017-07-23 16:41:48 -07:00
pins_CHEAPTRONIC.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_CHEAPTRONICv2.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_CNCONTROLS_11.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_CNCONTROLS_12.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_ELEFU_3.h
…
pins_FELIX2.h
…
pins_GEN3_MONOLITHIC.h
…
pins_GEN3_PLUS.h
…
pins_GEN6_DELUXE.h
…
pins_GEN6.h
Minor patches to pins files
2017-08-23 18:32:59 -05:00
pins_GEN7_12.h
…
pins_GEN7_13.h
…
pins_GEN7_14.h
…
pins_GEN7_CUSTOM.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_GT2560_REV_A_PLUS.h
Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled
2017-09-27 10:39:44 -05:00
pins_GT2560_REV_A.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_K8200.h
…
pins_K8400.h
…
pins_LEAPFROG.h
…
pins_MAKEBOARD_MINI.h
Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 (#8041)
2017-10-21 00:24:22 -05:00
pins_MEGACONTROLLER.h
…
pins_MEGATRONICS_2.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_MEGATRONICS_3.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_MEGATRONICS.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_MELZI_CREALITY.h
No need for LCD_PINS_Dn when unused
2017-09-27 00:12:20 -05:00
pins_MELZI_MAKR3D.h
Tweak Sanguinololu-related pins files
2017-08-23 18:32:59 -05:00
pins_MELZI.h
Tweak Sanguinololu-related pins files
2017-08-23 18:32:59 -05:00
pins_MIGHTYBOARD_REVE.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_MINIRAMBO.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_MINITRONICS.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_MKS_13.h
MKS 1.3+: Add pin mapping for PS_ON
2017-07-21 18:50:05 -05:00
pins_MKS_BASE.h
…
pins_MKS_GEN_L.h
Added MKS GEN L board (#8088)
2017-10-27 02:13:41 -05:00
pins_OMCA_A.h
…
pins_OMCA.h
…
pins_PRINTRBOARD_REVF.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_PRINTRBOARD.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_RAMBO.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_RAMPS_13.h
…
pins_RAMPS_OLD.h
…
pins_RAMPS.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_RIGIDBOARD_V2.h
…
pins_RIGIDBOARD.h
…
pins_RUMBA.h
Pins-related cleanup, formatting
2017-05-21 07:18:03 -05:00
pins_SAINSMART_2IN1.h
…
pins_SANGUINOLOLU_11.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_SANGUINOLOLU_12.h
Tweak Sanguinololu-related pins files
2017-08-23 18:32:59 -05:00
pins_SAV_MKI.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_SCOOVO_X9H.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_SETHI.h
Formatting adjustments
2017-06-15 15:25:24 -05:00
pins_SILVER_GATE.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_STB_11.h
Tweak Sanguinololu-related pins files
2017-08-23 18:32:59 -05:00
pins_TEENSY2.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_TEENSYLU.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_ULTIMAIN_2.h
Edit digipot currents via LCD, save to EEPROM
2017-06-25 01:02:36 -05:00
pins_ULTIMAKER_OLD.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_ULTIMAKER.h
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
pins_ZRIB_V20.h
Support for ZRIB v2.0 Control Board
2017-06-02 12:05:46 -05:00
pins.h
Fix automatic stepper assignment for X/Y/Z dual stepper drivers
2017-11-02 18:50:25 -05:00
pinsDebug_list.h
Add Skynet/ANET A10 support
2017-06-24 19:07:03 -05:00
pinsDebug_plus_70.h
Support for SilverGate Board
2017-10-31 15:26:27 -05:00
pinsDebug_Teensyduino.h
Unify AVR90USB: pinsDebug changes
2017-06-09 19:20:16 -05:00
pinsDebug.h
Support for SilverGate Board
2017-10-31 15:26:27 -05:00
planner_bezier.cpp
Tweaks to cubic_b_sline code style
2017-11-04 22:00:45 -05:00
planner_bezier.h
…
planner.cpp
Display volumetric ratio in terms of E mm
2017-11-18 07:03:18 -06:00
planner.h
Display volumetric ratio in terms of E mm
2017-11-18 07:03:18 -06:00
point_t.h
Cleanup Nozzle class, fix XY vs Z move order
2017-11-05 18:14:18 -06:00
printcounter.cpp
Patch some serial macros
2017-06-09 17:17:23 -05:00
printcounter.h
…
SanityCheck.h
Clarify some motion code
2017-11-08 23:18:55 -06:00
Sd2Card.cpp
Cleanup, apply standards to SD lib, cardreader
2017-11-15 01:09:06 -06:00
Sd2Card.h
Cleanup, apply standards to SD lib, cardreader
2017-11-15 01:09:06 -06:00
SdBaseFile.cpp
Cleanup, apply standards to SD lib, cardreader
2017-11-15 01:09:06 -06:00
SdBaseFile.h
Cleanup, apply standards to SD lib, cardreader
2017-11-15 01:09:06 -06:00
SdFatConfig.h
Cleanup, apply standards to SD lib, cardreader
2017-11-15 01:09:06 -06:00
SdFatStructs.h
Cleanup, apply standards to SD lib, cardreader
2017-11-15 01:09:06 -06:00
SdFatUtil.cpp
Cleanup, apply standards to SD lib, cardreader
2017-11-15 01:09:06 -06:00
SdFatUtil.h
Cleanup, apply standards to SD lib, cardreader
2017-11-15 01:09:06 -06:00
SdFile.cpp
Cleanup, apply standards to SD lib, cardreader
2017-11-15 01:09:06 -06:00
SdFile.h
Cleanup, apply standards to SD lib, cardreader
2017-11-15 01:09:06 -06:00
SdInfo.h
Cleanup, apply standards to SD lib, cardreader
2017-11-15 01:09:06 -06:00
SdVolume.cpp
Cleanup, apply standards to SD lib, cardreader
2017-11-15 01:09:06 -06:00
SdVolume.h
Cleanup, apply standards to SD lib, cardreader
2017-11-15 01:09:06 -06:00
serial.cpp
…
serial.h
General code cleanup, spacing
2017-09-24 16:52:41 -05:00
servo.cpp
Implement SERVO_DELAY as array
2017-08-15 00:28:47 -05:00
servo.h
…
softspi.h
Fix hexadecimal number formatting
2017-08-14 22:50:44 -05:00
speed_lookuptable.h
…
stepper_dac.cpp
convert DAC percent to uint8_t
2017-06-19 17:46:41 -05:00
stepper_dac.h
convert DAC percent to uint8_t
2017-06-19 17:46:41 -05:00
stepper_indirection.cpp
Use float to init TMC2133 steps-per-mm
2017-08-05 03:48:52 -05:00
stepper_indirection.h
Add support for Průša MK2 Multiplexer
2017-06-27 04:55:30 -05:00
stepper.cpp
Implement support for Dual X and Y endstops
2017-10-29 03:49:45 -05:00
stepper.h
Implement support for Dual X and Y endstops
2017-10-29 03:49:45 -05:00
stopwatch.cpp
…
stopwatch.h
…
temperature.cpp
Display volumetric ratio in terms of E mm
2017-11-18 07:03:18 -06:00
temperature.h
Cleanup around updatePID
2017-11-10 19:17:46 -06:00
thermistornames.h
…
thermistortable_1.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_2.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_3.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_4.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_5.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_6.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_7.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_8.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_9.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_10.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_11.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_12.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_13.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_20.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_51.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_52.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_55.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_60.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_66.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_70.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_71.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_75.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_110.h
…
thermistortable_147.h
…
thermistortable_998.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_999.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
thermistortable_1010.h
…
thermistortable_1047.h
…
thermistortables.h
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
twibus.cpp
Patch some serial macros
2017-06-09 17:17:23 -05:00
twibus.h
Clean up some trailing spaces
2017-07-01 22:32:20 -05:00
types.h
…
ubl_G29.cpp
Use do_blocking_move_to where possible
2017-11-10 20:37:41 -06:00
ubl_motion.cpp
Tweaks to core motion code
2017-11-08 20:08:20 -06:00
ubl.cpp
Fix G26's circle drawing... (#8291)
2017-11-06 18:26:47 -06:00
ubl.h
Fix G26's circle drawing... (#8291)
2017-11-06 18:26:47 -06:00
ultralcd_impl_DOGM.h
Display volumetric ratio in terms of E mm
2017-11-18 07:03:18 -06:00
ultralcd_impl_HD44780.h
Display volumetric ratio in terms of E mm
2017-11-18 07:03:18 -06:00
ultralcd_st7565_u8glib_VIKI.h
Support for SilverGate Board
2017-10-31 15:26:27 -05:00
ultralcd_st7920_u8glib_rrd.h
Support for SilverGate Board
2017-10-31 15:26:27 -05:00
ultralcd.cpp
Fixes #8472
2017-11-18 05:14:31 -06:00
ultralcd.h
Fix warnings for REPRAPWORLD_KEYPAD
2017-11-13 22:25:17 -06:00
utf_mapper.h
Tweak spacing in utf8_mapper.h
2017-10-06 15:11:27 -05:00
utility.cpp
convert DAC percent to uint8_t
2017-06-19 17:46:41 -05:00
utility.h
Updates for G33-LCD interface
2017-07-07 05:00:59 -05:00
vector_3.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
vector_3.h
Reference op with variable name
2017-05-28 11:33:22 -05:00
Version.h
Encourage users to re-examine their configs
2017-10-24 18:33:31 -05:00
watchdog.cpp
Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR
2017-11-03 04:45:13 +01:00
watchdog.h
…