MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
Firmware/Marlin
History
Richard Wackerbarth 7b4bdc0203 DUAL_X_CARRIAGE motor enabling 
As noted by @darkjavi et.al. in #103, the E1 motor was not being enabled in planner.cpp when using DUAL_X_CARRIAGE. This patch enables and disables E1 as it should.
2015-09-30 04:31:19 -05:00
..
configurator
Hint for changed behaviour of SDSUPPORT
2015-09-28 11:07:33 -05:00
example_configurations
Hint for changed behaviour of SDSUPPORT
2015-09-28 11:07:33 -05:00
fonts
Overridable Options - Part 3 (PR#2555)
2015-07-31 00:19:13 -05:00
scripts
…
blinkm.cpp
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
blinkm.h
Deprecate Support for Arduino IDE < 1.0.5
2015-06-08 17:15:28 -05:00
boards.h
add makerlab mega controller pin configs
2015-07-23 22:51:40 -05:00
buzzer.cpp
Suppress some compiler warnings
2015-08-16 06:56:47 -05:00
buzzer.h
Fix typo in buzzer.h endif (PR#2337)
2015-06-27 06:10:19 -05:00
cardreader.cpp
SDEXTRASLOW for some SD card readers (PR#176)
2015-09-14 07:58:08 -05:00
cardreader.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
Conditionals.h
Disable SDSUPPORT by default
2015-09-06 02:04:49 -05:00
Configuration_adv.h
Cleanup
2015-09-17 10:44:23 -05:00
configuration_store.cpp
Implement PID_ADD_EXTRUSION_RATE
2015-09-12 07:53:20 -05:00
configuration_store.h
Overridable Options - Part 11 (PR#2563)
2015-07-31 01:07:04 -05:00
Configuration.h
Hint for changed behaviour of SDSUPPORT
2015-09-28 11:07:33 -05:00
Default_Version.h
Marlin 1.1.0 Release Candidate 2 - 29 September 2015
2015-09-29 20:28:41 -05:00
digipot_mcp4451.cpp
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
dogm_bitmaps.h
Make bootscreen configurable for the graphic displays
2015-08-03 07:13:00 -05:00
dogm_font_data_6x9_marlin.h
update for newest version of U8glib_Arduino
2015-08-26 19:52:59 -05:00
dogm_font_data_HD44780_C.h
update for newest version of U8glib_Arduino
2015-08-26 19:52:59 -05:00
dogm_font_data_HD44780_J.h
update for newest version of U8glib_Arduino
2015-08-26 19:52:59 -05:00
dogm_font_data_HD44780_W.h
update for newest version of U8glib_Arduino
2015-08-26 19:52:59 -05:00
dogm_font_data_ISO10646_1.h
update for newest version of U8glib_Arduino
2015-08-26 19:52:59 -05:00
dogm_font_data_ISO10646_5_Cyrillic.h
update for newest version of U8glib_Arduino
2015-08-26 19:52:59 -05:00
dogm_font_data_ISO10646_CN.h
update for newest version of U8glib_Arduino
2015-08-26 19:52:59 -05:00
dogm_font_data_ISO10646_Kana.h
update for newest version of U8glib_Arduino
2015-08-26 19:52:59 -05:00
dogm_font_data_Marlin_symbols.h
update for newest version of U8glib_Arduino
2015-08-26 19:52:59 -05:00
dogm_lcd_implementation.h
Conditionalize functions that rely on SDSUPPORT
2015-09-12 07:30:09 -05:00
fastio.h
Spacing and spelling
2015-04-03 22:54:48 -07:00
language_an.h
Cleanup file formatting
2015-09-12 07:48:27 -05:00
language_bg.h
Cleanup file formatting
2015-09-12 07:48:27 -05:00
language_ca.h
Cleanup file formatting
2015-09-12 07:48:27 -05:00
language_cn.h
Show nozzles, heaters, and extruders numbered 1-4
2015-09-12 07:40:18 -05:00
language_cz.h
Show nozzles, heaters, and extruders numbered 1-4
2015-09-12 07:40:18 -05:00
language_da.h
Show nozzles, heaters, and extruders numbered 1-4
2015-09-12 07:40:18 -05:00
language_de.h
Show nozzles, heaters, and extruders numbered 1-4
2015-09-12 07:40:18 -05:00
language_en.h
Show nozzles, heaters, and extruders numbered 1-4
2015-09-12 07:40:18 -05:00
language_es.h
Cleanup file formatting
2015-09-12 07:48:27 -05:00
language_eu.h
Cleanup file formatting
2015-09-12 07:48:27 -05:00
language_fi.h
Show nozzles, heaters, and extruders numbered 1-4
2015-09-12 07:40:18 -05:00
language_fr.h
Show nozzles, heaters, and extruders numbered 1-4
2015-09-12 07:40:18 -05:00
language_it.h
Cleanup file formatting
2015-09-12 07:48:27 -05:00
language_kana_utf8.h
Cleanup file formatting
2015-09-12 07:48:27 -05:00
language_kana.h
Cleanup file formatting
2015-09-12 07:48:27 -05:00
language_nl.h
Cleanup file formatting
2015-09-12 07:48:27 -05:00
language_pl.h
Cleanup file formatting
2015-09-12 07:48:27 -05:00
language_pt-br.h
Show nozzles, heaters, and extruders numbered 1-4
2015-09-12 07:40:18 -05:00
language_pt.h
Show nozzles, heaters, and extruders numbered 1-4
2015-09-12 07:40:18 -05:00
language_ru.h
Show nozzles, heaters, and extruders numbered 1-4
2015-09-12 07:40:18 -05:00
language_test.h
Cleanup file formatting
2015-09-12 07:48:27 -05:00
language.h
Implement PID_ADD_EXTRUSION_RATE
2015-09-12 07:53:20 -05:00
M100_Free_Mem_Chk.cpp
Apply remaining ENABLED/DISABLED conditionals
2015-08-03 16:04:48 -05:00
macros.h
Add COUNT macro and apply
2015-07-22 18:16:05 -05:00
Makefile
makefile: add buzzer.cpp (PR#2479)
2015-07-30 07:56:44 -05:00
Marlin_main.cpp
LCD home button causes repeated homing (PR#175)
2015-09-14 06:31:49 -05:00
Marlin.h
Implement PID_ADD_EXTRUSION_RATE
2015-09-12 07:53:20 -05:00
Marlin.ino
Apply ENABLED / DISABLED to Marlin core files (PR#2558)
2015-07-31 01:03:58 -05:00
MarlinSerial.cpp
Use lowercase names for serial instances
2015-08-02 23:01:39 -05:00
MarlinSerial.h
Use lowercase names for serial instances
2015-08-02 23:01:39 -05:00
mesh_bed_leveling.cpp
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
mesh_bed_leveling.h
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
pins_3DRAG.h
Rename BEEPER to BEEPER_PIN
2015-07-31 17:13:53 -05:00
pins_5DPRINT.h
Overridable Options - Part 4 (PR#2556)
2015-07-31 00:44:53 -05:00
pins_99.h
…
pins_AZTEEG_X1.h
…
pins_AZTEEG_X3_PRO.h
Some renaming of Z_PROBE to Z_MIN_PROBE (PR#91)
2015-08-20 06:04:46 -05:00
pins_AZTEEG_X3.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_BAM_DICE_DUE.h
Add pins_RAMPS_13_EFB.h to reduce redundancy
2015-06-15 20:17:09 -05:00
pins_BRAINWAVE_PRO.h
Update ABL comments (PR#95)
2015-08-26 05:51:38 -05:00
pins_BRAINWAVE.h
Overridable Options - Part 4 (PR#2556)
2015-07-31 00:44:53 -05:00
pins_CHEAPTRONIC.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_ELEFU_3.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_FELIX2.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_GEN3_MONOLITHIC.h
…
pins_GEN3_PLUS.h
…
pins_GEN6_DELUXE.h
…
pins_GEN6.h
…
pins_GEN7_12.h
…
pins_GEN7_13.h
…
pins_GEN7_14.h
…
pins_GEN7_CUSTOM.h
Rename BEEPER to BEEPER_PIN
2015-08-02 22:09:08 -05:00
pins_K8200.h
…
pins_LEAPFROG.h
Move Y2 and Z2 pins defines to pins.h
2015-09-07 09:41:06 -05:00
pins_MEGACONTROLLER.h
Cleanup
2015-09-17 10:44:23 -05:00
pins_MEGATRONICS_2.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_MEGATRONICS_3.h
Define servo pins just like other pins
2015-08-02 23:26:58 -05:00
pins_MEGATRONICS.h
Apply remaining ENABLED/DISABLED conditionals
2015-08-03 16:04:48 -05:00
pins_MELZI_MAKR3D.h
Rename and repair MELZI_1284 (PR#2301)
2015-06-22 22:30:07 -04:00
pins_MELZI.h
…
pins_MINIRAMBO.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_MINITRONICS.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_MKS_BASE.h
Add pins_RAMPS_13_EFB.h to reduce redundancy
2015-06-15 20:17:09 -05:00
pins_OMCA_A.h
Rename BEEPER to BEEPER_PIN
2015-08-02 22:09:08 -05:00
pins_OMCA.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_PRINTRBOARD.h
Apply remaining ENABLED/DISABLED conditionals
2015-08-03 16:04:48 -05:00
pins_RAMBO.h
Cleanup
2015-09-17 10:44:23 -05:00
pins_RAMPS_13_EFB.h
Add pins_RAMPS_13_EFB.h to reduce redundancy
2015-06-15 20:17:09 -05:00
pins_RAMPS_13.h
Cleanup
2015-09-17 10:44:23 -05:00
pins_RAMPS_OLD.h
Overridable Options - Part 4 (PR#2556)
2015-07-31 00:44:53 -05:00
pins_RIGIDBOARD.h
Cleanup
2015-09-17 10:44:23 -05:00
pins_RUMBA.h
Fix up probe pin define and test
2015-09-10 10:54:03 -05:00
pins_SANGUINOLOLU_11.h
Cleanup
2015-09-17 10:44:23 -05:00
pins_SANGUINOLOLU_12.h
Rename and repair MELZI_1284 (PR#2301)
2015-06-22 22:30:07 -04:00
pins_SAV_MKI.h
Define servo pins just like other pins
2015-08-02 23:26:58 -05:00
pins_SETHI.h
…
pins_STB_11.h
…
pins_TEENSY2.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_TEENSYLU.h
Use lowercase names for serial instances
2015-08-02 23:01:39 -05:00
pins_ULTIMAIN_2.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_ULTIMAKER_OLD.h
…
pins_ULTIMAKER.h
Define servo pins just like other pins
2015-08-02 23:26:58 -05:00
pins.h
Add E1 pins to SENSITIVE_PINS for Dual Y or Dual Z
2015-09-07 09:41:06 -05:00
planner.cpp
DUAL_X_CARRIAGE motor enabling
2015-09-30 04:31:19 -05:00
planner.h
Rename ENABLE_AUTO_BED_LEVELING
2015-08-27 20:52:08 -05:00
qr_solve.cpp
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
qr_solve.h
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
SanityCheck.h
Fix up probe pin define and test
2015-09-10 10:54:03 -05:00
Sd2Card.cpp
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
Sd2Card.h
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
Sd2PinMap.h
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
SdBaseFile.cpp
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
SdBaseFile.h
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
SdFatConfig.h
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
SdFatStructs.h
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
SdFatUtil.cpp
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
SdFatUtil.h
Cleanup
2015-09-17 10:44:23 -05:00
SdFile.cpp
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
SdFile.h
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
SdInfo.h
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
SdVolume.cpp
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
SdVolume.h
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
servo.cpp
Apply remaining ENABLED/DISABLED conditionals
2015-08-03 16:04:48 -05:00
servo.h
Some more servo code tweaks
2015-07-24 22:04:49 -05:00
speed_lookuptable.h
…
stepper_indirection.cpp
Overridable Options - Part 8 (PR#2560)
2015-07-31 01:05:22 -05:00
stepper_indirection.h
Overridable Options - Part 8 (PR#2560)
2015-07-31 01:05:22 -05:00
stepper.cpp
Hack to address stuttering caused by ISR not finishing in time
2015-09-10 08:26:17 -05:00
stepper.h
Overridable Options - Part 8 (PR#2560)
2015-07-31 01:05:22 -05:00
temperature.cpp
Implement PID_ADD_EXTRUSION_RATE
2015-09-12 07:53:20 -05:00
temperature.h
Overridable Options - Part 9 (PR#2561)
2015-07-31 01:05:55 -05:00
thermistortables.h
Update thermistortables for Hisens Thermistor (PR#2588)
2015-08-09 18:11:14 -05:00
ultralcd_implementation_hitachi_HD44780.h
Drop www. from marlinfirmware.org (PR#175)
2015-09-14 06:28:53 -05:00
ultralcd_st7920_u8glib_rrd.h
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
ultralcd.cpp
Fix high LCD status screen update frequency (PR#2655)
2015-09-28 11:07:33 -05:00
ultralcd.h
Suppress some compiler warnings
2015-08-16 06:56:47 -05:00
utf_mapper.h
remove colon in utf_mapper.h (PR#106)
2015-08-27 07:15:23 -05:00
vector_3.cpp
Rename ENABLE_AUTO_BED_LEVELING
2015-08-27 20:52:08 -05:00
vector_3.h
Rename ENABLE_AUTO_BED_LEVELING
2015-08-27 20:52:08 -05:00
watchdog.cpp
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00
watchdog.h
Overridable Options - Part 5
2015-07-31 01:24:20 -05:00