MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
8e35029f10
Firmware/Marlin/thermistortables.h
Lenbok 0aa833fe6c Chamber temperature monitoring and auto fan control. 
This is an initial cut for feedback.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
2018-04-06 23:09:44 -05:00

271 lines
8.6 KiB
C
Raw Blame History

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef THERMISTORTABLES_H_
#define THERMISTORTABLES_H_
#include "Marlin.h"
#include "macros.h"
#define OVERSAMPLENR 16
#define OV(N) int16_t((N)*(OVERSAMPLENR))
#define ANY_THERMISTOR_IS(n) (THERMISTORHEATER_0 == n || THERMISTORHEATER_1 == n || THERMISTORHEATER_2 == n || THERMISTORHEATER_3 == n || THERMISTORHEATER_4 == n || THERMISTORBED == n || THERMISTORCHAMBER == n)
// Pt1000 and Pt100 handling
//
// Rt=R0*(1+a*T+b*T*T) [for T>0]
// a=3.9083E-3, b=-5.775E-7
#define PtA 3.9083E-3
#define PtB -5.775E-7
#define PtRt(T,R0) ((R0)*(1.0+(PtA)*(T)+(PtB)*(T)*(T)))
#define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1))
#define PtLine(T,R0,Rup) { OV(PtAdVal(T,R0,Rup)), T },
#if ANY_THERMISTOR_IS(1) // 100k bed thermistor
#include "thermistortable_1.h"
#endif
#if ANY_THERMISTOR_IS(2) // 200k bed thermistor
#include "thermistortable_2.h"
#endif
#if ANY_THERMISTOR_IS(3) // mendel-parts
#include "thermistortable_3.h"
#endif
#if ANY_THERMISTOR_IS(4) // 10k thermistor
#include "thermistortable_4.h"
#endif
#if ANY_THERMISTOR_IS(5) // 100k ParCan thermistor (104GT-2)
#include "thermistortable_5.h"
#endif
#if ANY_THERMISTOR_IS(6) // 100k Epcos thermistor
#include "thermistortable_6.h"
#endif
#if ANY_THERMISTOR_IS(7) // 100k Honeywell 135-104LAG-J01
#include "thermistortable_7.h"
#endif
#if ANY_THERMISTOR_IS(71) // 100k Honeywell 135-104LAF-J01
#include "thermistortable_71.h"
#endif
#if ANY_THERMISTOR_IS(8) // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
#include "thermistortable_8.h"
#endif
#if ANY_THERMISTOR_IS(9) // 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
#include "thermistortable_9.h"
#endif
#if ANY_THERMISTOR_IS(10) // 100k RS thermistor 198-961 (4.7k pullup)
#include "thermistortable_10.h"
#endif
#if ANY_THERMISTOR_IS(11) // QU-BD silicone bed QWG-104F-3950 thermistor
#include "thermistortable_11.h"
#endif
#if ANY_THERMISTOR_IS(13) // Hisens thermistor B25/50 =3950 +/-1%
#include "thermistortable_13.h"
#endif
#if ANY_THERMISTOR_IS(15) // JGAurora A5 thermistor calibration
#include "thermistortable_15.h"
#endif
#if ANY_THERMISTOR_IS(20) // PT100 with INA826 amp on Ultimaker v2.0 electronics
#include "thermistortable_20.h"
#endif
#if ANY_THERMISTOR_IS(51) // 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
#include "thermistortable_51.h"
#endif
#if ANY_THERMISTOR_IS(52) // 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
#include "thermistortable_52.h"
#endif
#if ANY_THERMISTOR_IS(55) // 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
#include "thermistortable_55.h"
#endif
#if ANY_THERMISTOR_IS(60) // Maker's Tool Works Kapton Bed Thermistor
#include "thermistortable_60.h"
#endif
#if ANY_THERMISTOR_IS(66) // DyzeDesign 500°C Thermistor
#include "thermistortable_66.h"
#endif
#if ANY_THERMISTOR_IS(12) // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
#include "thermistortable_12.h"
#endif
#if ANY_THERMISTOR_IS(70) // bqh2 stock thermistor
#include "thermistortable_70.h"
#endif
#if ANY_THERMISTOR_IS(75) // Many of the generic silicon heat pads use the MGB18-104F39050L32 Thermistor
#include "thermistortable_75.h"
#endif
#if ANY_THERMISTOR_IS(110) // Pt100 with 1k0 pullup
#include "thermistortable_110.h"
#endif
#if ANY_THERMISTOR_IS(147) // Pt100 with 4k7 pullup
#include "thermistortable_147.h"
#endif
#if ANY_THERMISTOR_IS(1010) // Pt1000 with 1k0 pullup
#include "thermistortable_1010.h"
#endif
#if ANY_THERMISTOR_IS(1047) // Pt1000 with 4k7 pullup
#include "thermistortable_1047.h"
#endif
#if ANY_THERMISTOR_IS(998) // User-defined table 1
#include "thermistortable_998.h"
#endif
#if ANY_THERMISTOR_IS(999) // User-defined table 2
#include "thermistortable_999.h"
#endif
#define _TT_NAME(_N) temptable_ ## _N
#define TT_NAME(_N) _TT_NAME(_N)
#ifdef THERMISTORHEATER_0
#define HEATER_0_TEMPTABLE TT_NAME(THERMISTORHEATER_0)
#define HEATER_0_TEMPTABLE_LEN COUNT(HEATER_0_TEMPTABLE)
#elif defined(HEATER_0_USES_THERMISTOR)
#error "No heater 0 thermistor table specified"
#else
#define HEATER_0_TEMPTABLE NULL
#define HEATER_0_TEMPTABLE_LEN 0
#endif
#ifdef THERMISTORHEATER_1
#define HEATER_1_TEMPTABLE TT_NAME(THERMISTORHEATER_1)
#define HEATER_1_TEMPTABLE_LEN COUNT(HEATER_1_TEMPTABLE)
#elif defined(HEATER_1_USES_THERMISTOR)
#error "No heater 1 thermistor table specified"
#else
#define HEATER_1_TEMPTABLE NULL
#define HEATER_1_TEMPTABLE_LEN 0
#endif
#ifdef THERMISTORHEATER_2
#define HEATER_2_TEMPTABLE TT_NAME(THERMISTORHEATER_2)
#define HEATER_2_TEMPTABLE_LEN COUNT(HEATER_2_TEMPTABLE)
#elif defined(HEATER_2_USES_THERMISTOR)
#error "No heater 2 thermistor table specified"
#else
#define HEATER_2_TEMPTABLE NULL
#define HEATER_2_TEMPTABLE_LEN 0
#endif
#ifdef THERMISTORHEATER_3
#define HEATER_3_TEMPTABLE TT_NAME(THERMISTORHEATER_3)
#define HEATER_3_TEMPTABLE_LEN COUNT(HEATER_3_TEMPTABLE)
#elif defined(HEATER_3_USES_THERMISTOR)
#error "No heater 3 thermistor table specified"
#else
#define HEATER_3_TEMPTABLE NULL
#define HEATER_3_TEMPTABLE_LEN 0
#endif
#ifdef THERMISTORHEATER_4
#define HEATER_4_TEMPTABLE TT_NAME(THERMISTORHEATER_4)
#define HEATER_4_TEMPTABLE_LEN COUNT(HEATER_4_TEMPTABLE)
#elif defined(HEATER_4_USES_THERMISTOR)
#error "No heater 4 thermistor table specified"
#else
#define HEATER_4_TEMPTABLE NULL
#define HEATER_4_TEMPTABLE_LEN 0
#endif
#ifdef THERMISTORBED
#define BEDTEMPTABLE TT_NAME(THERMISTORBED)
#define BEDTEMPTABLE_LEN COUNT(BEDTEMPTABLE)
#else
#ifdef BED_USES_THERMISTOR
#error "No bed thermistor table specified"
#endif
#endif
#ifdef THERMISTORCHAMBER
#define CHAMBERTEMPTABLE TT_NAME(THERMISTORCHAMBER)
#define CHAMBERTEMPTABLE_LEN COUNT(CHAMBERTEMPTABLE)
#else
#ifdef CHAMBER_USES_THERMISTOR
#error "No chamber thermistor table specified"
#endif
#endif
// Set the high and low raw values for the heaters
// For thermistors the highest temperature results in the lowest ADC value
// For thermocouples the highest temperature results in the highest ADC value
#ifndef HEATER_0_RAW_HI_TEMP
#ifdef HEATER_0_USES_THERMISTOR
#define HEATER_0_RAW_HI_TEMP 0
#define HEATER_0_RAW_LO_TEMP 16383
#else
#define HEATER_0_RAW_HI_TEMP 16383
#define HEATER_0_RAW_LO_TEMP 0
#endif
#endif
#ifndef HEATER_1_RAW_HI_TEMP
#ifdef HEATER_1_USES_THERMISTOR
#define HEATER_1_RAW_HI_TEMP 0
#define HEATER_1_RAW_LO_TEMP 16383
#else
#define HEATER_1_RAW_HI_TEMP 16383
#define HEATER_1_RAW_LO_TEMP 0
#endif
#endif
#ifndef HEATER_2_RAW_HI_TEMP
#ifdef HEATER_2_USES_THERMISTOR
#define HEATER_2_RAW_HI_TEMP 0
#define HEATER_2_RAW_LO_TEMP 16383
#else
#define HEATER_2_RAW_HI_TEMP 16383
#define HEATER_2_RAW_LO_TEMP 0
#endif
#endif
#ifndef HEATER_3_RAW_HI_TEMP
#ifdef HEATER_3_USES_THERMISTOR
#define HEATER_3_RAW_HI_TEMP 0
#define HEATER_3_RAW_LO_TEMP 16383
#else
#define HEATER_3_RAW_HI_TEMP 16383
#define HEATER_3_RAW_LO_TEMP 0
#endif
#endif
#ifndef HEATER_4_RAW_HI_TEMP
#ifdef HEATER_4_USES_THERMISTOR
#define HEATER_4_RAW_HI_TEMP 0
#define HEATER_4_RAW_LO_TEMP 16383
#else
#define HEATER_4_RAW_HI_TEMP 16383
#define HEATER_4_RAW_LO_TEMP 0
#endif
#endif
#ifndef HEATER_BED_RAW_HI_TEMP
#ifdef BED_USES_THERMISTOR
#define HEATER_BED_RAW_HI_TEMP 0
#define HEATER_BED_RAW_LO_TEMP 16383
#else
#define HEATER_BED_RAW_HI_TEMP 16383
#define HEATER_BED_RAW_LO_TEMP 0
#endif
#endif
#ifndef HEATER_CHAMBER_RAW_HI_TEMP
#ifdef CHAMBER_USES_THERMISTOR
#define HEATER_CHAMBER_RAW_HI_TEMP 0
#define HEATER_CHAMBER_RAW_LO_TEMP 16383
#else
#define HEATER_CHAMBER_RAW_HI_TEMP 16383
#define HEATER_CHAMBER_RAW_LO_TEMP 0
#endif
#endif
#endif // THERMISTORTABLES_H_
Reference in New Issue View Git Blame Copy Permalink