MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
8e35029f10
Firmware/Marlin
History
Lenbok 0aa833fe6c Chamber temperature monitoring and auto fan control. 
This is an initial cut for feedback.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
2018-04-06 23:09:44 -05:00
..
example_configurations Add Chamber Temp options to example configs 2018-04-06 23:09:43 -05:00
bitmap_flags.h Parity with 2.0.x bitmap functions 2017-11-25 19:56:22 -06:00
blinkm.cpp Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
blinkm.h Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
boards.h Added support for Einsy Retro 2018-04-05 18:15:58 -05:00
buzzer.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
cardreader.cpp Reset progress bar when print ends 2018-04-06 20:12:40 -05:00
cardreader.h Add C parameter to M27 to get the current filename 2018-03-15 22:55:30 -05:00
circularqueue.h
Conditionals_LCD.h Z Endstop Servo => Z Probe Servo 2018-04-01 23:54:47 -05:00
Conditionals_post.h Chamber temperature monitoring and auto fan control. 2018-04-06 23:09:44 -05:00
Conditionals.h
Configuration_adv.h Chamber temperature monitoring and auto fan control. 2018-04-06 23:09:44 -05:00
configuration_store.cpp Handle disabled HYBRID_THRESHOLD in EEPROM (#10274) 2018-04-01 16:58:30 -05:00
configuration_store.h Tweaks to E2END, mesh slot offset 2018-03-10 06:54:18 -06:00
Configuration.h Chamber temperature monitoring and auto fan control. 2018-04-06 23:09:44 -05:00
dac_mcp4728.cpp Apply standards for whole-file conditions 2018-02-04 21:17:03 -06:00
dac_mcp4728.h Fix get/setDrvPct declarations 2017-06-09 20:21:28 -07:00
digipot_mcp4018.cpp Fix: set digipot mcp4018 Vrefmax to 1.666V 2017-06-24 12:35:34 -05:00
digipot_mcp4451.cpp Apply maths macros and type changes ahead of HAL 2017-06-19 22:57:42 -05:00
dogm_bitmaps.h Fix compile error with SHOW_BOOTSCREEN disabled 2018-02-17 15:39:46 -06:00
dogm_font_data_6x9_marlin.h
dogm_font_data_HD44780_C.h
dogm_font_data_HD44780_J.h
dogm_font_data_HD44780_W.h
dogm_font_data_ISO10646_1_PL.h Polish font 2017-04-21 21:42:41 -05:00
dogm_font_data_ISO10646_1_tr.h Improve M600 with timeout, wait for heatup. 2017-02-15 05:29:34 -06:00
dogm_font_data_ISO10646_1.h Fix non-extended font option 2017-11-06 21:43:18 -06:00
dogm_font_data_ISO10646_5_Cyrillic.h
dogm_font_data_ISO10646_CN.h
dogm_font_data_ISO10646_CZ.h UTF-8 mapper for Czech 2017-07-04 15:51:23 -05:00
dogm_font_data_ISO10646_Greek.h Change font decent to -1 for tt and gr 2016-11-26 02:29:23 +01:00
dogm_font_data_ISO10646_Kana.h
dogm_font_data_ISO10646_SK.h Added Slovak C2C3C4 mapper implementation. 2017-10-06 14:40:15 -05:00
dogm_font_data_Marlin_symbols.h
duration_t.h Use static classes for job timers (#9940) 2018-03-04 22:52:25 -06:00
endstop_interrupts.h General code/bitmaps cleanup 2017-12-13 17:57:54 -06:00
endstops.cpp Prevent null pointer crash in Endstops::update 2018-03-20 04:23:38 -05:00
endstops.h Move [xyz]_endstop_adj to Endstops class 2018-03-10 06:54:18 -06:00
enum.h Add Continuous Purge feature to Advanced Pause 2018-04-04 20:59:50 -05:00
fastio_168.h remove MARLIN line , change to logical pin (#10163) 2018-03-20 16:24:17 -05:00
fastio_644.h remove MARLIN line , change to logical pin (#10163) 2018-03-20 16:24:17 -05:00
fastio_1280.h remove MARLIN line , change to logical pin (#10163) 2018-03-20 16:24:17 -05:00
fastio_1281.h remove MARLIN line , change to logical pin (#10163) 2018-03-20 16:24:17 -05:00
fastio_AT90USB.h remove MARLIN line , change to logical pin (#10163) 2018-03-20 16:24:17 -05:00
fastio.h Chamber temperature monitoring and auto fan control. 2018-04-06 23:09:44 -05:00
fwretract.cpp Fix likely issue with retract/recover 2018-03-31 22:59:48 -05:00
fwretract.h [1.1] FWRetract Reset (Best way) (#10084) 2018-03-14 01:34:15 -05:00
G26_Mesh_Validation_Tool.cpp Update includes for gcode.h => parser.h 2018-03-14 01:01:45 -05:00
hex_print_routines.cpp Update includes for gcode.h => parser.h 2018-03-14 01:01:45 -05:00
hex_print_routines.h Patch hex_print_routines.* include order 2018-02-05 17:05:26 -06:00
I2CPositionEncoder.cpp Update includes for gcode.h => parser.h 2018-03-14 01:01:45 -05:00
I2CPositionEncoder.h I2C position encoders update 2018-02-08 02:46:12 -06:00
language_an.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_bg.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_ca.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_cn.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_cz_utf8.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_cz.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_da.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_de.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_el-gr.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_el.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_en.h Improve heating/cooling LCD messages (#10296) 2018-04-04 19:13:48 -05:00
language_es_utf8.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_es.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_eu.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_fi.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_fr_utf8.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_fr.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_gl.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_hr.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_it.h [1.1.x] Update language_it.h (#10323) 2018-04-06 20:07:08 -05:00
language_kana_utf8.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_kana.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_nl.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_pl-DOGM.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_pl-HD44780.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_pl.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_pt_utf8.h Fix some mapper, charsize problems (#9865) 2018-02-28 18:56:45 -06:00
language_pt-br_utf8.h Fix some mapper, charsize problems (#9865) 2018-02-28 18:56:45 -06:00
language_pt-br.h Apply feedrate to nozzle movement for kinematic machines 2018-02-03 22:17:13 -06:00
language_pt.h Apply feedrate to nozzle movement for kinematic machines 2018-02-03 22:17:13 -06:00
language_ru.h Update language_ru.h (#10311) 2018-04-05 00:47:02 -05:00
language_sk_utf8.h Update Slovak language (#10313) 2018-04-06 20:20:40 -05:00
language_test.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_tr.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_uk.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_zh_CN.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language_zh_TW.h "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
language.h Spanish (UTF8) Language (#9785) 2018-02-23 20:23:35 -06:00
least_squares_fit.cpp Apply coding standards to recent merges 2017-07-13 00:46:16 -05:00
least_squares_fit.h Apply coding standards to recent merges 2017-07-13 00:46:16 -05:00
leds.cpp Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
leds.h Use NEOPIXEL as case light 2018-01-20 16:57:04 -06:00
M100_Free_Mem_Chk.cpp Update includes for gcode.h => parser.h 2018-03-14 01:01:45 -05:00
macros.h Move _AXIS macro to macros.h 2018-03-19 17:59:59 -05:00
Makefile Added support for Einsy Retro 2018-04-05 18:15:58 -05:00
malyanlcd.cpp Update includes for gcode.h => parser.h 2018-03-14 01:01:45 -05:00
Marlin_main.cpp Scale feedrate (mm/s to deg/s) for SCARA 2018-04-05 16:17:23 -05:00
Marlin.h Automatically reset stepper timeout in manage_inactivity 2018-03-21 19:08:02 -05:00
Marlin.ino Marlin.ino needs no content 2018-02-06 01:09:51 -06:00
MarlinConfig.h Combine __AVR__ and USBCON for 2.0.x parity 2018-03-10 01:51:35 -06:00
MarlinSerial.cpp Combine __AVR__ and USBCON for 2.0.x parity 2018-03-10 01:51:35 -06:00
MarlinSerial.h Combine __AVR__ and USBCON for 2.0.x parity 2018-03-10 01:51:35 -06:00
MarlinSPI.h Add / use 32-bit wide bit macros 2018-02-01 21:47:23 -06:00
Max7219_Debug_LEDs.cpp Patch Max7219 for parity with 2.0.x 2018-02-11 05:19:36 -06:00
Max7219_Debug_LEDs.h Initial conflict resolution of SD_REPRINT_LAST_SELECTED_FILE (#8104) 2017-10-26 11:44:55 -05:00
mesh_bed_leveling.cpp Make mbl.has_mesh() a method 2018-01-07 18:14:37 -06:00
mesh_bed_leveling.h Make enums into implicit char 2018-03-06 23:36:56 -06:00
neopixel.cpp Make safe_delay available for neopixel startup test 2018-02-16 22:25:57 -06:00
neopixel.h Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
nozzle.cpp [1.1.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8864) 2017-12-24 23:47:05 -06:00
nozzle.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
parser.cpp Update includes for gcode.h => parser.h 2018-03-14 01:01:45 -05:00
parser.h Update includes for gcode.h => parser.h 2018-03-14 01:01:45 -05:00
pca9632.cpp Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
pca9632.h Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
pins_3DRAG.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_5DPRINT.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_ANET_10.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_AZTEEG_X1.h Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
pins_AZTEEG_X3_PRO.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_AZTEEG_X3.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_BAM_DICE_DUE.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_BQ_ZUM_MEGA_3D.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_BRAINWAVE_PRO.h removed execution mode from files 2018-01-24 00:17:34 -06:00
pins_BRAINWAVE.h removed execution mode from files 2018-01-24 00:17:34 -06:00
pins_CHEAPTRONIC.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_CHEAPTRONICv2.h Pins parity with 2.0.x 2018-02-26 01:20:57 -06:00
pins_CNCONTROLS_11.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_CNCONTROLS_12.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_EINSY_RAMBO.h Added support for Einsy Retro 2018-04-05 18:15:58 -05:00
pins_EINSY_RETRO.h Added support for Einsy Retro 2018-04-05 18:15:58 -05:00
pins_ELEFU_3.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_FELIX2.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_GEN3_MONOLITHIC.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_GEN3_PLUS.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_GEN6_DELUXE.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_GEN6.h Minor patches to pins files 2017-08-23 18:32:59 -05:00
pins_GEN7_12.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_GEN7_13.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_GEN7_14.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_GEN7_CUSTOM.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_GT2560_REV_A_PLUS.h Fix GT2560 A+ servo pins 2017-12-25 02:20:13 -06:00
pins_GT2560_REV_A.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_K8200.h
pins_K8400.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_LEAPFROG.h
pins_MAKEBOARD_MINI.h Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 (#8041) 2017-10-21 00:24:22 -05:00
pins_MEGACONTROLLER.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_MEGATRONICS_2.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_MEGATRONICS_3.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_MEGATRONICS.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_MELZI_CREALITY.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_MELZI_MAKR3D.h Melzi boards include melzi pins 2018-02-10 15:03:20 -06:00
pins_MELZI_MALYAN.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_MELZI_TRONXY.h Easier override of ST7920 LCD timing 2018-03-17 02:37:24 -05:00
pins_MELZI.h Melzi boards include melzi pins 2018-02-10 15:03:20 -06:00
pins_MIGHTYBOARD_REVE.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_MINIRAMBO.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_MINITRONICS.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_MKS_13.h MKS 1.3+: Add pin mapping for PS_ON 2017-07-21 18:50:05 -05:00
pins_MKS_BASE_HEROIC.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_MKS_BASE.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_MKS_GEN_L.h Added MKS GEN L board (#8088) 2017-10-27 02:13:41 -05:00
pins_OMCA_A.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_OMCA.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_PRINTRBOARD_REVF.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_PRINTRBOARD.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_RAMBO.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_RAMPS_13.h
pins_RAMPS_ENDER_4.h Add Creality Ender-4 configurations 2018-02-24 22:01:16 -06:00
pins_RAMPS_OLD.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_RAMPS_PLUS.h Adding support for using the MKS_12864OLED with the SSD1306 controller 2017-12-16 17:44:34 -06:00
pins_RAMPS.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_RIGIDBOARD_V2.h Need to define this for Rigidboard V2 2017-04-30 19:04:27 -05:00
pins_RIGIDBOARD.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_RUMBA.h Chamber temperature monitoring and auto fan control. 2018-04-06 23:09:44 -05:00
pins_SAINSMART_2IN1.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_SANGUINOLOLU_11.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_SANGUINOLOLU_12.h Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
pins_SAV_MKI.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_SCOOVO_X9H.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_SETHI.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_SILVER_GATE.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_STB_11.h Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
pins_TEENSY2.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_TEENSYLU.h Pins spacing, 2.0.x parity 2018-02-17 21:49:00 -06:00
pins_TRIGORILLA.h Pins spacing, 2.0.x parity 2018-02-17 21:49:00 -06:00
pins_ULTIMAIN_2.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_ULTIMAKER_OLD.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_ULTIMAKER.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pins_ZRIB_V20.h Support for ZRIB v2.0 Control Board 2017-06-02 12:05:46 -05:00
pins.h Chamber temperature monitoring and auto fan control. 2018-04-06 23:09:44 -05:00
pinsDebug_list.h Chamber temperature monitoring and auto fan control. 2018-04-06 23:09:44 -05:00
pinsDebug_plus_70.h Support for SilverGate Board 2017-10-31 15:26:27 -05:00
pinsDebug_Teensyduino.h Apply three spaces after pin defines 2018-03-28 12:26:44 -05:00
pinsDebug.h Fix DIGITAL_PIN_TO_ANALOG_PIN macro for Atmega1284p (#9883) 2018-03-01 15:14:08 -06:00
planner_bezier.cpp Apply standards for whole-file conditions 2018-02-04 21:17:03 -06:00
planner_bezier.h
planner.cpp Scale feedrate (mm/s to deg/s) for SCARA 2018-04-05 16:17:23 -05:00
planner.h Scale feedrate (mm/s to deg/s) for SCARA 2018-04-05 16:17:23 -05:00
point_t.h Cleanup Nozzle class, fix XY vs Z move order 2017-11-05 18:14:18 -06:00
power.cpp Consolidate smart stepper driver initialization 2018-03-19 22:06:04 -05:00
power.h Patch Power class 2018-02-10 15:36:42 -06:00
printcounter.cpp Use static classes for job timers (#9940) 2018-03-04 22:52:25 -06:00
printcounter.h Use static classes for job timers (#9940) 2018-03-04 22:52:25 -06:00
runout.cpp Import FilamentRunoutSensor with debounce (#9947) 2018-03-05 01:49:19 -06:00
runout.h Import FilamentRunoutSensor with debounce (#9947) 2018-03-05 01:49:19 -06:00
SanityCheck.h Default active low for TMC2130 DIAG1 (#10294) 2018-04-05 18:15:58 -05:00
Sd2Card.cpp Add pin_t to Marln 1.1 branch 2018-02-08 21:01:41 -06:00
Sd2Card.h Add pin_t to Marln 1.1 branch 2018-02-08 21:01:41 -06:00
SdBaseFile.cpp Use serial macros where possible 2018-02-16 17:53:47 -06:00
SdBaseFile.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFatConfig.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFatStructs.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFatUtil.cpp Use serial macros where possible 2018-02-16 17:53:47 -06:00
SdFatUtil.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFile.cpp Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFile.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdInfo.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdVolume.cpp Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdVolume.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
serial.cpp Use serial macros where possible 2018-02-16 17:53:47 -06:00
serial.h Combine __AVR__ and USBCON for 2.0.x parity 2018-03-10 01:51:35 -06:00
servo.cpp Allow servo.cpp to use safe_delay 2018-03-09 03:07:55 -06:00
servo.h Update servo.* for parity with 2.0.x 2018-03-08 19:32:32 -06:00
softspi.h Fix hexadecimal number formatting 2017-08-14 22:50:44 -05:00
speed_lookuptable.h Minimal include for speed_lookuptable 2017-12-05 21:44:59 -06:00
status_screen_DOGM.h Lightweight status screen for ST7920 2018-02-22 00:46:25 -06:00
status_screen_lite_ST7920_class.h Improvements to Lightweight ST7920 status screen. (#9960) 2018-03-06 01:49:45 -06:00
status_screen_lite_ST7920_spi.h Lightweight status screen for ST7920 2018-02-22 00:46:25 -06:00
status_screen_lite_ST7920.h When STATUS_EXPIRE_SECONDS is 0, hide the position. (#10100) 2018-03-14 02:44:41 -05:00
stepper_dac.cpp Move some strings to PROGMEM 2018-01-23 23:50:42 -06:00
stepper_dac.h Apply const to axis args 2017-12-11 00:20:29 -06:00
stepper_indirection.cpp Default active low for TMC2130 DIAG1 (#10294) 2018-04-05 18:15:58 -05:00
stepper_indirection.h Consolidate smart stepper driver initialization 2018-03-19 22:06:04 -05:00
stepper.cpp Output ABC for delta stepper counts 2018-03-31 20:12:53 -05:00
stepper.h Fix LA_active_extruder (static) 2018-03-07 05:50:35 -06:00
stopwatch.cpp Use static classes for job timers (#9940) 2018-03-04 22:52:25 -06:00
stopwatch.h Make enums into implicit char 2018-03-06 23:36:56 -06:00
temperature.cpp Chamber temperature monitoring and auto fan control. 2018-04-06 23:09:44 -05:00
temperature.h Chamber temperature monitoring and auto fan control. 2018-04-06 23:09:44 -05:00
thermistornames.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_1.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_2.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_3.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_4.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_5.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_6.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_7.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_8.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_9.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_10.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_11.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_12.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_13.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_15.h Add thermistor 15 tuned for JGAurora A5 2018-01-21 16:57:47 -06:00
thermistortable_20.h Chamber temperature monitoring and auto fan control. 2018-04-06 23:09:44 -05:00
thermistortable_51.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_52.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_55.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_60.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_66.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_70.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_71.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_75.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_110.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_147.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_998.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_999.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_1010.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_1047.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortables.h Chamber temperature monitoring and auto fan control. 2018-04-06 23:09:44 -05:00
tmc_util.cpp Use pgm_read_ptr for tables of pointers 2018-03-23 02:17:51 -04:00
tmc_util.h Quiet M906/M913/M914 with axes. Patch for DISTINCT_E_FACTORS. 2018-03-19 22:06:04 -05:00
twibus.cpp Apply standards for whole-file conditions 2018-02-04 21:17:03 -06:00
twibus.h Clean up some trailing spaces 2017-07-01 22:32:20 -05:00
types.h Fix types.h dependency 2018-02-25 22:01:01 -06:00
ubl_G29.cpp Automatically reset stepper timeout in manage_inactivity 2018-03-21 19:08:02 -05:00
ubl_motion.cpp Fix typo in ubl.prepare_segmented_line_to 2018-03-11 10:22:52 -05:00
ubl.cpp Also suspend keepalive messages with suspend_auto_report 2018-03-21 00:26:00 -05:00
ubl.h Fix LA_active_extruder (static) 2018-03-07 05:50:35 -06:00
ultralcd_impl_DOGM.h Use lcd_printPGM_utf in more places 2018-03-31 20:47:20 -05:00
ultralcd_impl_HD44780.h Use lcd_printPGM_utf in more places 2018-03-31 20:47:20 -05:00
ultralcd_st7565_u8glib_VIKI.h Fix VIKI2 hardware SPI compatibility (#9642) 2018-02-16 02:28:42 -06:00
ultralcd_st7920_u8glib_rrd.h Lightweight status screen for ST7920 2018-02-22 00:46:25 -06:00
ultralcd.cpp Add Continuous Purge feature to Advanced Pause 2018-04-04 20:59:50 -05:00
ultralcd.h Fix BTN_BACK 2018-02-28 03:27:36 -06:00
utf_mapper.h Tweak spacing in utf8_mapper.h 2017-10-06 15:11:27 -05:00
utility.cpp Patch utility for debug-leveling 2018-02-07 22:43:51 -06:00
utility.h Fix: utility.h requires types.h 2018-03-09 03:33:25 -06:00
vector_3.cpp Fix matrix.debug output 2018-03-18 20:03:34 -05:00
vector_3.h Add a struct defining EEPROM storage 2018-01-05 15:47:51 -06:00
Version.h Date refresh 2018-01-20 09:17:00 -06:00
watchdog.cpp Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR 2017-11-03 04:45:13 +01:00
watchdog.h