MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
b96ceb4256
Firmware/Marlin
History
GMagician b96ceb4256 [1.1.x] tool change bad behaviours 
This PR will address two issues reported in #8492. Just one is left because I don't know if it is an issue or not

1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
2) Since no move no bed level matrix should be applied
    When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
2017-11-20 16:39:32 -06:00
..
example_configurations Update Configuration.h 2017-11-16 23:18:55 -06:00
blinkm.cpp Patch #else / #endif comments 2017-05-09 12:37:23 -05:00
blinkm.h
boards.h Restore MKS_GEN_L 2017-11-02 12:14:54 -04:00
buzzer.h Spacing, const, comments 2017-06-07 16:07:38 -05:00
cardreader.cpp Apply SDCARD_SORT_ALPHA changes from 2.0.x 2017-11-15 01:09:13 -06:00
cardreader.h Apply SDCARD_SORT_ALPHA changes from 2.0.x 2017-11-15 01:09:13 -06:00
circularqueue.h
Conditionals_LCD.h Patch G33 misuse of PROBE_MANUALLY 2017-11-07 22:28:54 -06:00
Conditionals_post.h Update the UBL Probable Area for Delta's 2017-11-17 16:41:31 -06:00
Conditionals.h
Configuration_adv.h Add M114_DETAIL to Configuration_adv.h 2017-11-14 00:06:35 -06:00
configuration_store.cpp No retroactive changes with M851 Z 2017-11-18 03:37:07 -06:00
configuration_store.h Expose DISABLE_M503 option as a test option 2017-07-01 21:31:28 -05:00
Configuration.h Move Filament Width Sensor to Configuration_adv.h 2017-11-13 21:06:40 -06:00
dac_mcp4728.cpp Fix get/setDrvPct declarations 2017-06-09 20:21:28 -07:00
dac_mcp4728.h Fix get/setDrvPct declarations 2017-06-09 20:21:28 -07:00
digipot_mcp4018.cpp Fix: set digipot mcp4018 Vrefmax to 1.666V 2017-06-24 12:35:34 -05:00
digipot_mcp4451.cpp Apply maths macros and type changes ahead of HAL 2017-06-19 22:57:42 -05:00
dogm_bitmaps.h Added option for graphical overlay for Z-offset 2017-08-31 14:21:39 -06:00
dogm_font_data_6x9_marlin.h
dogm_font_data_HD44780_C.h
dogm_font_data_HD44780_J.h
dogm_font_data_HD44780_W.h
dogm_font_data_ISO10646_1_PL.h
dogm_font_data_ISO10646_1_tr.h
dogm_font_data_ISO10646_1.h Fix non-extended font option 2017-11-06 21:43:18 -06:00
dogm_font_data_ISO10646_5_Cyrillic.h
dogm_font_data_ISO10646_CN.h
dogm_font_data_ISO10646_CZ.h UTF-8 mapper for Czech 2017-07-04 15:51:23 -05:00
dogm_font_data_ISO10646_Greek.h
dogm_font_data_ISO10646_Kana.h
dogm_font_data_ISO10646_SK.h Added Slovak C2C3C4 mapper implementation. 2017-10-06 14:40:15 -05:00
dogm_font_data_Marlin_symbols.h
duration_t.h
endstop_interrupts.h Implement support for Dual X and Y endstops 2017-10-29 03:49:45 -05:00
endstops.cpp Implement support for Dual X and Y endstops 2017-10-29 03:49:45 -05:00
endstops.h Implement support for Dual X and Y endstops 2017-10-29 03:49:45 -05:00
enum.h Implement support for Dual X and Y endstops 2017-10-29 03:49:45 -05:00
fastio_168.h Split up fastio.h, document pin mappings 2017-05-21 10:33:27 -05:00
fastio_644.h Split up fastio.h, document pin mappings 2017-05-21 10:33:27 -05:00
fastio_1280.h Split up fastio.h, document pin mappings 2017-05-21 10:33:27 -05:00
fastio_1281.h Split up fastio.h, document pin mappings 2017-05-21 10:33:27 -05:00
fastio_AT90USB.h Tweaks for M43 2017-07-06 21:47:50 -05:00
fastio.h Drop fastio timer cruft 2017-06-15 14:43:40 -05:00
G26_Mesh_Validation_Tool.cpp Move mesh test options under G26 option 2017-11-13 21:06:40 -06:00
gcode.cpp Fix parser value handling 2017-11-14 23:23:22 -06:00
gcode.h Add pre-calculated planner.e_factor 2017-11-10 20:09:59 -06:00
hex_print_routines.cpp New GCode Parser - Implementation 2017-05-23 14:15:10 -05:00
hex_print_routines.h New GCode Parser - Implementation 2017-05-23 14:15:10 -05:00
I2CPositionEncoder.cpp Followup for I2C_POSITION_ENCODERS 2017-06-27 20:46:40 -05:00
I2CPositionEncoder.h Remove I2CPEM workspace offset 2017-11-04 22:00:45 -05:00
language_an.h Fix non-extended font option 2017-11-06 21:43:18 -06:00
language_bg.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_ca.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_cn.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_cz_utf8.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_cz.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_da.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_de.h Length fix and translation 2017-11-07 18:16:30 +01:00
language_el-gr.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_el.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_en.h Fix non-extended font option 2017-11-06 21:43:18 -06:00
language_es.h Fix non-extended font option 2017-11-06 21:43:18 -06:00
language_eu.h Fix non-extended font option 2017-11-06 21:43:18 -06:00
language_fi.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_fr_utf8.h give this language an unique name 2017-10-26 15:48:00 -05:00
language_fr.h Fix non-extended font option 2017-11-06 21:43:18 -06:00
language_gl.h Fix non-extended font option 2017-11-06 21:43:18 -06:00
language_hr.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_it.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_kana_utf8.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_kana.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_nl.h Fix non-extended font option 2017-11-06 21:43:18 -06:00
language_pl-DOGM.h Add some Polish translations 2017-10-26 22:44:23 -05:00
language_pl-HD44780.h Fix non-extended font option 2017-11-06 21:43:18 -06:00
language_pl.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_pt_utf8.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_pt-br_utf8.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_pt-br.h Fix non-extended font option 2017-11-06 21:43:18 -06:00
language_pt.h Fix non-extended font option 2017-11-06 21:43:18 -06:00
language_ru.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_sk_utf8.h Added Slovak C2C3C4 mapper implementation. 2017-10-06 14:40:15 -05:00
language_test.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_tr.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_uk.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_zh_CN.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_zh_TW.h Updates Traditional Chinese, rebase for bugfix-1.1.x 2017-11-10 04:49:09 -06:00
language.h Allow asterisks in G-Code commands 2017-10-31 21:14:56 -05:00
least_squares_fit.cpp Apply coding standards to recent merges 2017-07-13 00:46:16 -05:00
least_squares_fit.h Apply coding standards to recent merges 2017-07-13 00:46:16 -05:00
M100_Free_Mem_Chk.cpp Apply const, spacing, etc. 2017-06-27 05:23:49 -05:00
macros.h Update macros for parity with 2.0.x 2017-11-10 04:32:27 -06:00
Makefile Add Max7219 LED Matrix Debug Support (#7563) 2017-08-25 17:03:07 -05:00
Marlin_main.cpp [1.1.x] tool change bad behaviours 2017-11-20 16:39:32 -06:00
Marlin.h No retroactive changes with M851 Z 2017-11-18 03:37:07 -06:00
Marlin.ino
MarlinConfig.h
MarlinSerial.cpp Fix Emergency Parser 2017-10-14 15:58:07 -05:00
MarlinSerial.h Tweak spacing in utf8_mapper.h 2017-10-06 15:11:27 -05:00
MarlinSPI.h Fix PlatformIO dependencies 2017-11-16 15:16:21 -06:00
Max7219_Debug_LEDs.cpp Apply coding standards to Max7219 code 2017-11-17 15:33:55 -06:00
Max7219_Debug_LEDs.h Initial conflict resolution of SD_REPRINT_LAST_SELECTED_FILE (#8104) 2017-10-26 11:44:55 -05:00
mesh_bed_leveling.cpp Move fade_scaling_factor_for_z to Planner 2017-10-14 02:10:46 -05:00
mesh_bed_leveling.h Move fade_scaling_factor_for_z to Planner 2017-10-14 02:10:46 -05:00
nozzle.cpp Fix point_t pointer in Nozzle::zigzag 2017-11-05 18:32:32 -06:00
nozzle.h Cleanup Nozzle class, fix XY vs Z move order 2017-11-05 18:14:18 -06:00
pca9632.cpp Fix hexadecimal number formatting 2017-08-14 22:50:44 -05:00
pca9632.h PCA9632 PWM color LED support 2017-06-12 01:09:24 -05:00
pins_3DRAG.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_5DPRINT.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_ANET_10.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_AZTEEG_X1.h Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
pins_AZTEEG_X3_PRO.h Unify AVR90USB: Pins cleanup 2017-06-09 18:48:12 -05:00
pins_AZTEEG_X3.h Apply some tweaks based on 2.0.x 2017-10-09 17:39:03 -05:00
pins_BAM_DICE_DUE.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_BQ_ZUM_MEGA_3D.h Add support for BQ heated bed kit with Hephestos 2 2017-07-07 03:10:38 -05:00
pins_BRAINWAVE_PRO.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_BRAINWAVE.h Remove extraneous USBCON defines for AT90USB boards 2017-07-23 16:41:48 -07:00
pins_CHEAPTRONIC.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_CHEAPTRONICv2.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_CNCONTROLS_11.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_CNCONTROLS_12.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_ELEFU_3.h
pins_FELIX2.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_GEN3_MONOLITHIC.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_GEN3_PLUS.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_GEN6_DELUXE.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_GEN6.h Minor patches to pins files 2017-08-23 18:32:59 -05:00
pins_GEN7_12.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_GEN7_13.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_GEN7_14.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_GEN7_CUSTOM.h Unify AVR90USB: Pins cleanup 2017-06-09 18:48:12 -05:00
pins_GT2560_REV_A_PLUS.h Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled 2017-09-27 10:39:44 -05:00
pins_GT2560_REV_A.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_K8200.h
pins_K8400.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_LEAPFROG.h
pins_MAKEBOARD_MINI.h Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 (#8041) 2017-10-21 00:24:22 -05:00
pins_MEGACONTROLLER.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_MEGATRONICS_2.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_MEGATRONICS_3.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_MEGATRONICS.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_MELZI_CREALITY.h No need for LCD_PINS_Dn when unused 2017-09-27 00:12:20 -05:00
pins_MELZI_MAKR3D.h Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
pins_MELZI.h Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
pins_MIGHTYBOARD_REVE.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_MINIRAMBO.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_MINITRONICS.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_MKS_13.h MKS 1.3+: Add pin mapping for PS_ON 2017-07-21 18:50:05 -05:00
pins_MKS_BASE.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_MKS_GEN_L.h Added MKS GEN L board (#8088) 2017-10-27 02:13:41 -05:00
pins_OMCA_A.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_OMCA.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_PRINTRBOARD_REVF.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_PRINTRBOARD.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_RAMBO.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_RAMPS_13.h
pins_RAMPS_OLD.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_RAMPS.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_RIGIDBOARD_V2.h
pins_RIGIDBOARD.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_RUMBA.h Pins-related cleanup, formatting 2017-05-21 07:18:03 -05:00
pins_SAINSMART_2IN1.h
pins_SANGUINOLOLU_11.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_SANGUINOLOLU_12.h Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
pins_SAV_MKI.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_SCOOVO_X9H.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_SETHI.h Formatting adjustments 2017-06-15 15:25:24 -05:00
pins_SILVER_GATE.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_STB_11.h Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
pins_TEENSY2.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_TEENSYLU.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_ULTIMAIN_2.h Edit digipot currents via LCD, save to EEPROM 2017-06-25 01:02:36 -05:00
pins_ULTIMAKER_OLD.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_ULTIMAKER.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_ZRIB_V20.h Support for ZRIB v2.0 Control Board 2017-06-02 12:05:46 -05:00
pins.h Fix automatic stepper assignment for X/Y/Z dual stepper drivers 2017-11-02 18:50:25 -05:00
pinsDebug_list.h Add Skynet/ANET A10 support 2017-06-24 19:07:03 -05:00
pinsDebug_plus_70.h Support for SilverGate Board 2017-10-31 15:26:27 -05:00
pinsDebug_Teensyduino.h Unify AVR90USB: pinsDebug changes 2017-06-09 19:20:16 -05:00
pinsDebug.h Support for SilverGate Board 2017-10-31 15:26:27 -05:00
planner_bezier.cpp Tweaks to cubic_b_sline code style 2017-11-04 22:00:45 -05:00
planner_bezier.h
planner.cpp Display volumetric ratio in terms of E mm 2017-11-18 07:03:18 -06:00
planner.h Display volumetric ratio in terms of E mm 2017-11-18 07:03:18 -06:00
point_t.h Cleanup Nozzle class, fix XY vs Z move order 2017-11-05 18:14:18 -06:00
printcounter.cpp Patch some serial macros 2017-06-09 17:17:23 -05:00
printcounter.h
SanityCheck.h Clarify some motion code 2017-11-08 23:18:55 -06:00
Sd2Card.cpp Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
Sd2Card.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdBaseFile.cpp Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdBaseFile.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFatConfig.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFatStructs.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFatUtil.cpp Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFatUtil.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFile.cpp Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFile.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdInfo.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdVolume.cpp Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdVolume.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
serial.cpp Add proportional font adjustment ratio 2017-05-10 17:19:03 -04:00
serial.h General code cleanup, spacing 2017-09-24 16:52:41 -05:00
servo.cpp Implement SERVO_DELAY as array 2017-08-15 00:28:47 -05:00
servo.h
softspi.h Fix hexadecimal number formatting 2017-08-14 22:50:44 -05:00
speed_lookuptable.h
stepper_dac.cpp convert DAC percent to uint8_t 2017-06-19 17:46:41 -05:00
stepper_dac.h convert DAC percent to uint8_t 2017-06-19 17:46:41 -05:00
stepper_indirection.cpp Use float to init TMC2133 steps-per-mm 2017-08-05 03:48:52 -05:00
stepper_indirection.h Add support for Průša MK2 Multiplexer 2017-06-27 04:55:30 -05:00
stepper.cpp Implement support for Dual X and Y endstops 2017-10-29 03:49:45 -05:00
stepper.h Implement support for Dual X and Y endstops 2017-10-29 03:49:45 -05:00
stopwatch.cpp
stopwatch.h Patch #else / #endif comments 2017-05-09 12:37:23 -05:00
temperature.cpp Display volumetric ratio in terms of E mm 2017-11-18 07:03:18 -06:00
temperature.h Cleanup around updatePID 2017-11-10 19:17:46 -06:00
thermistornames.h
thermistortable_1.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_2.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_3.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_4.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_5.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_6.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_7.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_8.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_9.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_10.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_11.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_12.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_13.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_20.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_51.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_52.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_55.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_60.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_66.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_70.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_71.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_75.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_110.h
thermistortable_147.h
thermistortable_998.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_999.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_1010.h
thermistortable_1047.h
thermistortables.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
twibus.cpp Patch some serial macros 2017-06-09 17:17:23 -05:00
twibus.h Clean up some trailing spaces 2017-07-01 22:32:20 -05:00
types.h
ubl_G29.cpp Use do_blocking_move_to where possible 2017-11-10 20:37:41 -06:00
ubl_motion.cpp Tweaks to core motion code 2017-11-08 20:08:20 -06:00
ubl.cpp Fix G26's circle drawing... (#8291) 2017-11-06 18:26:47 -06:00
ubl.h Fix G26's circle drawing... (#8291) 2017-11-06 18:26:47 -06:00
ultralcd_impl_DOGM.h Display volumetric ratio in terms of E mm 2017-11-18 07:03:18 -06:00
ultralcd_impl_HD44780.h Display volumetric ratio in terms of E mm 2017-11-18 07:03:18 -06:00
ultralcd_st7565_u8glib_VIKI.h Support for SilverGate Board 2017-10-31 15:26:27 -05:00
ultralcd_st7920_u8glib_rrd.h Support for SilverGate Board 2017-10-31 15:26:27 -05:00
ultralcd.cpp Fixes #8472 2017-11-18 05:14:31 -06:00
ultralcd.h Fix warnings for REPRAPWORLD_KEYPAD 2017-11-13 22:25:17 -06:00
utf_mapper.h Tweak spacing in utf8_mapper.h 2017-10-06 15:11:27 -05:00
utility.cpp convert DAC percent to uint8_t 2017-06-19 17:46:41 -05:00
utility.h Updates for G33-LCD interface 2017-07-07 05:00:59 -05:00
vector_3.cpp Apply maths macros and type changes ahead of HAL 2017-06-19 22:57:42 -05:00
vector_3.h Reference op with variable name 2017-05-28 11:33:22 -05:00
Version.h Encourage users to re-examine their configs 2017-10-24 18:33:31 -05:00
watchdog.cpp Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR 2017-11-03 04:45:13 +01:00
watchdog.h