MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
177ec20bf0
Firmware2/Marlin/thermistortables.h

1289 lines
44 KiB
C
Raw Normal View History

Further cleanup of comments, partial Doxygen-style Following up on #3231
2016-03-25 07:19:46 +01:00
/**
Added gplv3 header to all Marlin files
2016-03-24 19:01:20 +01:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
first commit
2011-08-12 22:28:35 +02:00
#ifndef THERMISTORTABLES_H_
#define THERMISTORTABLES_H_
simplified the includes, makefile now works with arduino23
2011-12-22 14:55:45 +01:00
#include "Marlin.h"
Add COUNT macro and apply
2015-07-23 00:50:20 +02:00
#include "macros.h"
and changed ultipanel to have the mm/sec and not mm/min Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 Conflicts: Marlin/Marlin.pde Marlin/ultralcd.h
2011-11-15 22:50:43 +01:00
Merged Marlin, Marlin non gen6 and Ultimaker changes
2011-11-04 18:02:56 +01:00
#define OVERSAMPLENR 16
first commit
2011-08-12 22:28:35 +02:00
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_0 == 1) || (THERMISTORHEATER_1 == 1) || (THERMISTORHEATER_2 == 1) || (THERMISTORHEATER_3 == 1) || (THERMISTORBED == 1) //100k bed thermistor
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 05:33:33 +01:00
const short temptable_1[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 23 * OVERSAMPLENR, 300 },
{ 25 * OVERSAMPLENR, 295 },
{ 27 * OVERSAMPLENR, 290 },
{ 28 * OVERSAMPLENR, 285 },
{ 31 * OVERSAMPLENR, 280 },
{ 33 * OVERSAMPLENR, 275 },
{ 35 * OVERSAMPLENR, 270 },
{ 38 * OVERSAMPLENR, 265 },
{ 41 * OVERSAMPLENR, 260 },
{ 44 * OVERSAMPLENR, 255 },
{ 48 * OVERSAMPLENR, 250 },
{ 52 * OVERSAMPLENR, 245 },
{ 56 * OVERSAMPLENR, 240 },
{ 61 * OVERSAMPLENR, 235 },
{ 66 * OVERSAMPLENR, 230 },
{ 71 * OVERSAMPLENR, 225 },
{ 78 * OVERSAMPLENR, 220 },
{ 84 * OVERSAMPLENR, 215 },
{ 92 * OVERSAMPLENR, 210 },
{ 100 * OVERSAMPLENR, 205 },
{ 109 * OVERSAMPLENR, 200 },
{ 120 * OVERSAMPLENR, 195 },
{ 131 * OVERSAMPLENR, 190 },
{ 143 * OVERSAMPLENR, 185 },
{ 156 * OVERSAMPLENR, 180 },
{ 171 * OVERSAMPLENR, 175 },
{ 187 * OVERSAMPLENR, 170 },
{ 205 * OVERSAMPLENR, 165 },
{ 224 * OVERSAMPLENR, 160 },
{ 245 * OVERSAMPLENR, 155 },
{ 268 * OVERSAMPLENR, 150 },
{ 293 * OVERSAMPLENR, 145 },
{ 320 * OVERSAMPLENR, 140 },
{ 348 * OVERSAMPLENR, 135 },
{ 379 * OVERSAMPLENR, 130 },
{ 411 * OVERSAMPLENR, 125 },
{ 445 * OVERSAMPLENR, 120 },
{ 480 * OVERSAMPLENR, 115 },
{ 516 * OVERSAMPLENR, 110 },
{ 553 * OVERSAMPLENR, 105 },
{ 591 * OVERSAMPLENR, 100 },
{ 628 * OVERSAMPLENR, 95 },
{ 665 * OVERSAMPLENR, 90 },
{ 702 * OVERSAMPLENR, 85 },
{ 737 * OVERSAMPLENR, 80 },
{ 770 * OVERSAMPLENR, 75 },
{ 801 * OVERSAMPLENR, 70 },
{ 830 * OVERSAMPLENR, 65 },
{ 857 * OVERSAMPLENR, 60 },
{ 881 * OVERSAMPLENR, 55 },
{ 903 * OVERSAMPLENR, 50 },
{ 922 * OVERSAMPLENR, 45 },
{ 939 * OVERSAMPLENR, 40 },
{ 954 * OVERSAMPLENR, 35 },
{ 966 * OVERSAMPLENR, 30 },
{ 977 * OVERSAMPLENR, 25 },
{ 985 * OVERSAMPLENR, 20 },
{ 993 * OVERSAMPLENR, 15 },
{ 999 * OVERSAMPLENR, 10 },
{ 1004 * OVERSAMPLENR, 5 },
{ 1008 * OVERSAMPLENR, 0 } // safety
first commit
2011-08-12 22:28:35 +02:00
};
#endif
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_0 == 2) || (THERMISTORHEATER_1 == 2) || (THERMISTORHEATER_2 == 2) || (THERMISTORHEATER_3 == 2) || (THERMISTORBED == 2) //200k bed thermistor
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
// 200k ATC Semitec 204GT-2
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 05:33:33 +01:00
const short temptable_2[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 1 * OVERSAMPLENR, 848 },
{ 30 * OVERSAMPLENR, 300 }, // top rating 300C
{ 34 * OVERSAMPLENR, 290 },
{ 39 * OVERSAMPLENR, 280 },
{ 46 * OVERSAMPLENR, 270 },
{ 53 * OVERSAMPLENR, 260 },
{ 63 * OVERSAMPLENR, 250 },
{ 74 * OVERSAMPLENR, 240 },
{ 87 * OVERSAMPLENR, 230 },
{ 104 * OVERSAMPLENR, 220 },
{ 124 * OVERSAMPLENR, 210 },
{ 148 * OVERSAMPLENR, 200 },
{ 176 * OVERSAMPLENR, 190 },
{ 211 * OVERSAMPLENR, 180 },
{ 252 * OVERSAMPLENR, 170 },
{ 301 * OVERSAMPLENR, 160 },
{ 357 * OVERSAMPLENR, 150 },
{ 420 * OVERSAMPLENR, 140 },
{ 489 * OVERSAMPLENR, 130 },
{ 562 * OVERSAMPLENR, 120 },
{ 636 * OVERSAMPLENR, 110 },
{ 708 * OVERSAMPLENR, 100 },
{ 775 * OVERSAMPLENR, 90 },
{ 835 * OVERSAMPLENR, 80 },
{ 884 * OVERSAMPLENR, 70 },
{ 924 * OVERSAMPLENR, 60 },
{ 955 * OVERSAMPLENR, 50 },
{ 977 * OVERSAMPLENR, 40 },
{ 993 * OVERSAMPLENR, 30 },
{ 1004 * OVERSAMPLENR, 20 },
{ 1012 * OVERSAMPLENR, 10 },
{ 1016 * OVERSAMPLENR, 0 }
first commit
2011-08-12 22:28:35 +02:00
};
#endif
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_0 == 3) || (THERMISTORHEATER_1 == 3) || (THERMISTORHEATER_2 == 3) || (THERMISTORHEATER_3 == 3) || (THERMISTORBED == 3) //mendel-parts
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 05:33:33 +01:00
const short temptable_3[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 1 * OVERSAMPLENR, 864 },
{ 21 * OVERSAMPLENR, 300 },
{ 25 * OVERSAMPLENR, 290 },
{ 29 * OVERSAMPLENR, 280 },
{ 33 * OVERSAMPLENR, 270 },
{ 39 * OVERSAMPLENR, 260 },
{ 46 * OVERSAMPLENR, 250 },
{ 54 * OVERSAMPLENR, 240 },
{ 64 * OVERSAMPLENR, 230 },
{ 75 * OVERSAMPLENR, 220 },
{ 90 * OVERSAMPLENR, 210 },
{ 107 * OVERSAMPLENR, 200 },
{ 128 * OVERSAMPLENR, 190 },
{ 154 * OVERSAMPLENR, 180 },
{ 184 * OVERSAMPLENR, 170 },
{ 221 * OVERSAMPLENR, 160 },
{ 265 * OVERSAMPLENR, 150 },
{ 316 * OVERSAMPLENR, 140 },
{ 375 * OVERSAMPLENR, 130 },
{ 441 * OVERSAMPLENR, 120 },
{ 513 * OVERSAMPLENR, 110 },
{ 588 * OVERSAMPLENR, 100 },
{ 734 * OVERSAMPLENR, 80 },
{ 856 * OVERSAMPLENR, 60 },
{ 938 * OVERSAMPLENR, 40 },
{ 986 * OVERSAMPLENR, 20 },
{ 1008 * OVERSAMPLENR, 0 },
{ 1018 * OVERSAMPLENR, -20 }
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
};
first commit
2011-08-12 22:28:35 +02:00
#endif
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_0 == 4) || (THERMISTORHEATER_1 == 4) || (THERMISTORHEATER_2 == 4) || (THERMISTORHEATER_3 == 4) || (THERMISTORBED == 4) //10k thermistor
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 05:33:33 +01:00
const short temptable_4[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 1 * OVERSAMPLENR, 430 },
{ 54 * OVERSAMPLENR, 137 },
{ 107 * OVERSAMPLENR, 107 },
{ 160 * OVERSAMPLENR, 91 },
{ 213 * OVERSAMPLENR, 80 },
{ 266 * OVERSAMPLENR, 71 },
{ 319 * OVERSAMPLENR, 64 },
{ 372 * OVERSAMPLENR, 57 },
{ 425 * OVERSAMPLENR, 51 },
{ 478 * OVERSAMPLENR, 46 },
{ 531 * OVERSAMPLENR, 41 },
{ 584 * OVERSAMPLENR, 35 },
{ 637 * OVERSAMPLENR, 30 },
{ 690 * OVERSAMPLENR, 25 },
{ 743 * OVERSAMPLENR, 20 },
{ 796 * OVERSAMPLENR, 14 },
{ 849 * OVERSAMPLENR, 7 },
{ 902 * OVERSAMPLENR, 0 },
{ 955 * OVERSAMPLENR, -11 },
{ 1008 * OVERSAMPLENR, -35 }
Added thermistor tables
2011-11-04 22:51:14 +01:00
};
#endif
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_0 == 5) || (THERMISTORHEATER_1 == 5) || (THERMISTORHEATER_2 == 5) || (THERMISTORHEATER_3 == 5) || (THERMISTORBED == 5) //100k ParCan thermistor (104GT-2)
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
// ATC Semitec 104GT-2 (Used in ParCan)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 05:33:33 +01:00
const short temptable_5[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 1 * OVERSAMPLENR, 713 },
{ 17 * OVERSAMPLENR, 300 }, // top rating 300C
{ 20 * OVERSAMPLENR, 290 },
{ 23 * OVERSAMPLENR, 280 },
{ 27 * OVERSAMPLENR, 270 },
{ 31 * OVERSAMPLENR, 260 },
{ 37 * OVERSAMPLENR, 250 },
{ 43 * OVERSAMPLENR, 240 },
{ 51 * OVERSAMPLENR, 230 },
{ 61 * OVERSAMPLENR, 220 },
{ 73 * OVERSAMPLENR, 210 },
{ 87 * OVERSAMPLENR, 200 },
{ 106 * OVERSAMPLENR, 190 },
{ 128 * OVERSAMPLENR, 180 },
{ 155 * OVERSAMPLENR, 170 },
{ 189 * OVERSAMPLENR, 160 },
{ 230 * OVERSAMPLENR, 150 },
{ 278 * OVERSAMPLENR, 140 },
{ 336 * OVERSAMPLENR, 130 },
{ 402 * OVERSAMPLENR, 120 },
{ 476 * OVERSAMPLENR, 110 },
{ 554 * OVERSAMPLENR, 100 },
{ 635 * OVERSAMPLENR, 90 },
{ 713 * OVERSAMPLENR, 80 },
{ 784 * OVERSAMPLENR, 70 },
{ 846 * OVERSAMPLENR, 60 },
{ 897 * OVERSAMPLENR, 50 },
{ 937 * OVERSAMPLENR, 40 },
{ 966 * OVERSAMPLENR, 30 },
{ 986 * OVERSAMPLENR, 20 },
{ 1000 * OVERSAMPLENR, 10 },
{ 1010 * OVERSAMPLENR, 0 }
Added thermistor tables
2011-11-04 22:51:14 +01:00
};
#endif
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_0 == 6) || (THERMISTORHEATER_1 == 6) || (THERMISTORHEATER_2 == 6) || (THERMISTORHEATER_3 == 6) || (THERMISTORBED == 6) // 100k Epcos thermistor
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 05:33:33 +01:00
const short temptable_6[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 1 * OVERSAMPLENR, 350 },
{ 28 * OVERSAMPLENR, 250 }, // top rating 250C
{ 31 * OVERSAMPLENR, 245 },
{ 35 * OVERSAMPLENR, 240 },
{ 39 * OVERSAMPLENR, 235 },
{ 42 * OVERSAMPLENR, 230 },
{ 44 * OVERSAMPLENR, 225 },
{ 49 * OVERSAMPLENR, 220 },
{ 53 * OVERSAMPLENR, 215 },
{ 62 * OVERSAMPLENR, 210 },
{ 71 * OVERSAMPLENR, 205 }, // fitted graphically
{ 78 * OVERSAMPLENR, 200 }, // fitted graphically
{ 94 * OVERSAMPLENR, 190 },
{ 102 * OVERSAMPLENR, 185 },
{ 116 * OVERSAMPLENR, 170 },
{ 143 * OVERSAMPLENR, 160 },
{ 183 * OVERSAMPLENR, 150 },
{ 223 * OVERSAMPLENR, 140 },
{ 270 * OVERSAMPLENR, 130 },
{ 318 * OVERSAMPLENR, 120 },
{ 383 * OVERSAMPLENR, 110 },
{ 413 * OVERSAMPLENR, 105 },
{ 439 * OVERSAMPLENR, 100 },
{ 484 * OVERSAMPLENR, 95 },
{ 513 * OVERSAMPLENR, 90 },
{ 607 * OVERSAMPLENR, 80 },
{ 664 * OVERSAMPLENR, 70 },
{ 781 * OVERSAMPLENR, 60 },
{ 810 * OVERSAMPLENR, 55 },
{ 849 * OVERSAMPLENR, 50 },
{ 914 * OVERSAMPLENR, 45 },
{ 914 * OVERSAMPLENR, 40 },
{ 935 * OVERSAMPLENR, 35 },
{ 954 * OVERSAMPLENR, 30 },
{ 970 * OVERSAMPLENR, 25 },
{ 978 * OVERSAMPLENR, 22 },
{ 1008 * OVERSAMPLENR, 3 },
{ 1023 * OVERSAMPLENR, 0 } // to allow internal 0 degrees C
Added thermistor tables
2011-11-04 22:51:14 +01:00
};
#endif
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_0 == 7) || (THERMISTORHEATER_1 == 7) || (THERMISTORHEATER_2 == 7) || (THERMISTORHEATER_3 == 7) || (THERMISTORBED == 7) // 100k Honeywell 135-104LAG-J01
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 05:33:33 +01:00
const short temptable_7[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 1 * OVERSAMPLENR, 941 },
{ 19 * OVERSAMPLENR, 362 },
{ 37 * OVERSAMPLENR, 299 }, // top rating 300C
{ 55 * OVERSAMPLENR, 266 },
{ 73 * OVERSAMPLENR, 245 },
{ 91 * OVERSAMPLENR, 229 },
{ 109 * OVERSAMPLENR, 216 },
{ 127 * OVERSAMPLENR, 206 },
{ 145 * OVERSAMPLENR, 197 },
{ 163 * OVERSAMPLENR, 190 },
{ 181 * OVERSAMPLENR, 183 },
{ 199 * OVERSAMPLENR, 177 },
{ 217 * OVERSAMPLENR, 171 },
{ 235 * OVERSAMPLENR, 166 },
{ 253 * OVERSAMPLENR, 162 },
{ 271 * OVERSAMPLENR, 157 },
{ 289 * OVERSAMPLENR, 153 },
{ 307 * OVERSAMPLENR, 149 },
{ 325 * OVERSAMPLENR, 146 },
{ 343 * OVERSAMPLENR, 142 },
{ 361 * OVERSAMPLENR, 139 },
{ 379 * OVERSAMPLENR, 135 },
{ 397 * OVERSAMPLENR, 132 },
{ 415 * OVERSAMPLENR, 129 },
{ 433 * OVERSAMPLENR, 126 },
{ 451 * OVERSAMPLENR, 123 },
{ 469 * OVERSAMPLENR, 121 },
{ 487 * OVERSAMPLENR, 118 },
{ 505 * OVERSAMPLENR, 115 },
{ 523 * OVERSAMPLENR, 112 },
{ 541 * OVERSAMPLENR, 110 },
{ 559 * OVERSAMPLENR, 107 },
{ 577 * OVERSAMPLENR, 105 },
{ 595 * OVERSAMPLENR, 102 },
{ 613 * OVERSAMPLENR, 99 },
{ 631 * OVERSAMPLENR, 97 },
{ 649 * OVERSAMPLENR, 94 },
{ 667 * OVERSAMPLENR, 92 },
{ 685 * OVERSAMPLENR, 89 },
{ 703 * OVERSAMPLENR, 86 },
{ 721 * OVERSAMPLENR, 84 },
{ 739 * OVERSAMPLENR, 81 },
{ 757 * OVERSAMPLENR, 78 },
{ 775 * OVERSAMPLENR, 75 },
{ 793 * OVERSAMPLENR, 72 },
{ 811 * OVERSAMPLENR, 69 },
{ 829 * OVERSAMPLENR, 66 },
{ 847 * OVERSAMPLENR, 62 },
{ 865 * OVERSAMPLENR, 59 },
{ 883 * OVERSAMPLENR, 55 },
{ 901 * OVERSAMPLENR, 51 },
{ 919 * OVERSAMPLENR, 46 },
{ 937 * OVERSAMPLENR, 41 },
{ 955 * OVERSAMPLENR, 35 },
{ 973 * OVERSAMPLENR, 27 },
{ 991 * OVERSAMPLENR, 17 },
{ 1009 * OVERSAMPLENR, 1 },
{ 1023 * OVERSAMPLENR, 0 } // to allow internal 0 degrees C
Added thermistor tables
2011-11-04 22:51:14 +01:00
};
#endif
Added Honeywell thermistor 135-104LAF-J01
2013-07-30 14:01:41 +02:00
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_0 == 71) || (THERMISTORHEATER_1 == 71) || (THERMISTORHEATER_2 == 71) || (THERMISTORHEATER_3 == 71) || (THERMISTORBED == 71) // 100k Honeywell 135-104LAF-J01
Added Honeywell thermistor 135-104LAF-J01
2013-07-30 14:01:41 +02:00
// R0 = 100000 Ohm
// T0 = 25 °C
// Beta = 3974
// R1 = 0 Ohm
// R2 = 4700 Ohm
const short temptable_71[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 35 * OVERSAMPLENR, 300 },
{ 51 * OVERSAMPLENR, 270 },
{ 54 * OVERSAMPLENR, 265 },
{ 58 * OVERSAMPLENR, 260 },
{ 59 * OVERSAMPLENR, 258 },
{ 61 * OVERSAMPLENR, 256 },
{ 63 * OVERSAMPLENR, 254 },
{ 64 * OVERSAMPLENR, 252 },
{ 66 * OVERSAMPLENR, 250 },
{ 67 * OVERSAMPLENR, 249 },
{ 68 * OVERSAMPLENR, 248 },
{ 69 * OVERSAMPLENR, 247 },
{ 70 * OVERSAMPLENR, 246 },
{ 71 * OVERSAMPLENR, 245 },
{ 72 * OVERSAMPLENR, 244 },
{ 73 * OVERSAMPLENR, 243 },
{ 74 * OVERSAMPLENR, 242 },
{ 75 * OVERSAMPLENR, 241 },
{ 76 * OVERSAMPLENR, 240 },
{ 77 * OVERSAMPLENR, 239 },
{ 78 * OVERSAMPLENR, 238 },
{ 79 * OVERSAMPLENR, 237 },
{ 80 * OVERSAMPLENR, 236 },
{ 81 * OVERSAMPLENR, 235 },
{ 82 * OVERSAMPLENR, 234 },
{ 84 * OVERSAMPLENR, 233 },
{ 85 * OVERSAMPLENR, 232 },
{ 86 * OVERSAMPLENR, 231 },
{ 87 * OVERSAMPLENR, 230 },
{ 89 * OVERSAMPLENR, 229 },
{ 90 * OVERSAMPLENR, 228 },
{ 91 * OVERSAMPLENR, 227 },
{ 92 * OVERSAMPLENR, 226 },
{ 94 * OVERSAMPLENR, 225 },
{ 95 * OVERSAMPLENR, 224 },
{ 97 * OVERSAMPLENR, 223 },
{ 98 * OVERSAMPLENR, 222 },
{ 99 * OVERSAMPLENR, 221 },
{ 101 * OVERSAMPLENR, 220 },
{ 102 * OVERSAMPLENR, 219 },
{ 104 * OVERSAMPLENR, 218 },
{ 106 * OVERSAMPLENR, 217 },
{ 107 * OVERSAMPLENR, 216 },
{ 109 * OVERSAMPLENR, 215 },
{ 110 * OVERSAMPLENR, 214 },
{ 112 * OVERSAMPLENR, 213 },
{ 114 * OVERSAMPLENR, 212 },
{ 115 * OVERSAMPLENR, 211 },
{ 117 * OVERSAMPLENR, 210 },
{ 119 * OVERSAMPLENR, 209 },
{ 121 * OVERSAMPLENR, 208 },
{ 123 * OVERSAMPLENR, 207 },
{ 125 * OVERSAMPLENR, 206 },
{ 126 * OVERSAMPLENR, 205 },
{ 128 * OVERSAMPLENR, 204 },
{ 130 * OVERSAMPLENR, 203 },
{ 132 * OVERSAMPLENR, 202 },
{ 134 * OVERSAMPLENR, 201 },
{ 136 * OVERSAMPLENR, 200 },
{ 139 * OVERSAMPLENR, 199 },
{ 141 * OVERSAMPLENR, 198 },
{ 143 * OVERSAMPLENR, 197 },
{ 145 * OVERSAMPLENR, 196 },
{ 147 * OVERSAMPLENR, 195 },
{ 150 * OVERSAMPLENR, 194 },
{ 152 * OVERSAMPLENR, 193 },
{ 154 * OVERSAMPLENR, 192 },
{ 157 * OVERSAMPLENR, 191 },
{ 159 * OVERSAMPLENR, 190 },
{ 162 * OVERSAMPLENR, 189 },
{ 164 * OVERSAMPLENR, 188 },
{ 167 * OVERSAMPLENR, 187 },
{ 170 * OVERSAMPLENR, 186 },
{ 172 * OVERSAMPLENR, 185 },
{ 175 * OVERSAMPLENR, 184 },
{ 178 * OVERSAMPLENR, 183 },
{ 181 * OVERSAMPLENR, 182 },
{ 184 * OVERSAMPLENR, 181 },
{ 187 * OVERSAMPLENR, 180 },
{ 190 * OVERSAMPLENR, 179 },
{ 193 * OVERSAMPLENR, 178 },
{ 196 * OVERSAMPLENR, 177 },
{ 199 * OVERSAMPLENR, 176 },
{ 202 * OVERSAMPLENR, 175 },
{ 205 * OVERSAMPLENR, 174 },
{ 208 * OVERSAMPLENR, 173 },
{ 212 * OVERSAMPLENR, 172 },
{ 215 * OVERSAMPLENR, 171 },
{ 219 * OVERSAMPLENR, 170 },
{ 237 * OVERSAMPLENR, 165 },
{ 256 * OVERSAMPLENR, 160 },
{ 300 * OVERSAMPLENR, 150 },
{ 351 * OVERSAMPLENR, 140 },
{ 470 * OVERSAMPLENR, 120 },
{ 504 * OVERSAMPLENR, 115 },
{ 538 * OVERSAMPLENR, 110 },
{ 552 * OVERSAMPLENR, 108 },
{ 566 * OVERSAMPLENR, 106 },
{ 580 * OVERSAMPLENR, 104 },
{ 594 * OVERSAMPLENR, 102 },
{ 608 * OVERSAMPLENR, 100 },
{ 622 * OVERSAMPLENR, 98 },
{ 636 * OVERSAMPLENR, 96 },
{ 650 * OVERSAMPLENR, 94 },
{ 664 * OVERSAMPLENR, 92 },
{ 678 * OVERSAMPLENR, 90 },
{ 712 * OVERSAMPLENR, 85 },
{ 745 * OVERSAMPLENR, 80 },
{ 758 * OVERSAMPLENR, 78 },
{ 770 * OVERSAMPLENR, 76 },
{ 783 * OVERSAMPLENR, 74 },
{ 795 * OVERSAMPLENR, 72 },
{ 806 * OVERSAMPLENR, 70 },
{ 818 * OVERSAMPLENR, 68 },
{ 829 * OVERSAMPLENR, 66 },
{ 840 * OVERSAMPLENR, 64 },
{ 850 * OVERSAMPLENR, 62 },
{ 860 * OVERSAMPLENR, 60 },
{ 870 * OVERSAMPLENR, 58 },
{ 879 * OVERSAMPLENR, 56 },
{ 888 * OVERSAMPLENR, 54 },
{ 897 * OVERSAMPLENR, 52 },
{ 905 * OVERSAMPLENR, 50 },
{ 924 * OVERSAMPLENR, 45 },
{ 940 * OVERSAMPLENR, 40 },
{ 955 * OVERSAMPLENR, 35 },
{ 967 * OVERSAMPLENR, 30 },
{ 970 * OVERSAMPLENR, 29 },
{ 972 * OVERSAMPLENR, 28 },
{ 974 * OVERSAMPLENR, 27 },
{ 976 * OVERSAMPLENR, 26 },
{ 978 * OVERSAMPLENR, 25 },
{ 980 * OVERSAMPLENR, 24 },
{ 982 * OVERSAMPLENR, 23 },
{ 984 * OVERSAMPLENR, 22 },
{ 985 * OVERSAMPLENR, 21 },
{ 987 * OVERSAMPLENR, 20 },
{ 995 * OVERSAMPLENR, 15 },
{ 1001 * OVERSAMPLENR, 10 },
{ 1006 * OVERSAMPLENR, 5 },
{ 1010 * OVERSAMPLENR, 0 }
Added Honeywell thermistor 135-104LAF-J01
2013-07-30 14:01:41 +02:00
};
#endif
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_0 == 8) || (THERMISTORHEATER_1 == 8) || (THERMISTORHEATER_2 == 8) || (THERMISTORHEATER_3 == 8) || (THERMISTORBED == 8)
add RepRapPro Huxley thermistor tables
2012-12-30 12:09:38 +01:00
// 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
const short temptable_8[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 1 * OVERSAMPLENR, 704 },
{ 54 * OVERSAMPLENR, 216 },
{ 107 * OVERSAMPLENR, 175 },
{ 160 * OVERSAMPLENR, 152 },
{ 213 * OVERSAMPLENR, 137 },
{ 266 * OVERSAMPLENR, 125 },
{ 319 * OVERSAMPLENR, 115 },
{ 372 * OVERSAMPLENR, 106 },
{ 425 * OVERSAMPLENR, 99 },
{ 478 * OVERSAMPLENR, 91 },
{ 531 * OVERSAMPLENR, 85 },
{ 584 * OVERSAMPLENR, 78 },
{ 637 * OVERSAMPLENR, 71 },
{ 690 * OVERSAMPLENR, 65 },
{ 743 * OVERSAMPLENR, 58 },
{ 796 * OVERSAMPLENR, 50 },
{ 849 * OVERSAMPLENR, 42 },
{ 902 * OVERSAMPLENR, 31 },
{ 955 * OVERSAMPLENR, 17 },
{ 1008 * OVERSAMPLENR, 0 }
add RepRapPro Huxley thermistor tables
2012-12-30 12:09:38 +01:00
};
#endif
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_0 == 9) || (THERMISTORHEATER_1 == 9) || (THERMISTORHEATER_2 == 9) || (THERMISTORHEATER_3 == 9) || (THERMISTORBED == 9)
add RepRapPro Huxley thermistor tables
2012-12-30 12:09:38 +01:00
// 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
const short temptable_9[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 1 * OVERSAMPLENR, 936 },
{ 36 * OVERSAMPLENR, 300 },
{ 71 * OVERSAMPLENR, 246 },
{ 106 * OVERSAMPLENR, 218 },
{ 141 * OVERSAMPLENR, 199 },
{ 176 * OVERSAMPLENR, 185 },
{ 211 * OVERSAMPLENR, 173 },
{ 246 * OVERSAMPLENR, 163 },
{ 281 * OVERSAMPLENR, 155 },
{ 316 * OVERSAMPLENR, 147 },
{ 351 * OVERSAMPLENR, 140 },
{ 386 * OVERSAMPLENR, 134 },
{ 421 * OVERSAMPLENR, 128 },
{ 456 * OVERSAMPLENR, 122 },
{ 491 * OVERSAMPLENR, 117 },
{ 526 * OVERSAMPLENR, 112 },
{ 561 * OVERSAMPLENR, 107 },
{ 596 * OVERSAMPLENR, 102 },
{ 631 * OVERSAMPLENR, 97 },
{ 666 * OVERSAMPLENR, 92 },
{ 701 * OVERSAMPLENR, 87 },
{ 736 * OVERSAMPLENR, 81 },
{ 771 * OVERSAMPLENR, 76 },
{ 806 * OVERSAMPLENR, 70 },
{ 841 * OVERSAMPLENR, 63 },
{ 876 * OVERSAMPLENR, 56 },
{ 911 * OVERSAMPLENR, 48 },
{ 946 * OVERSAMPLENR, 38 },
{ 981 * OVERSAMPLENR, 23 },
{ 1005 * OVERSAMPLENR, 5 },
{ 1016 * OVERSAMPLENR, 0 }
add RepRapPro Huxley thermistor tables
2012-12-30 12:09:38 +01:00
};
#endif
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_0 == 10) || (THERMISTORHEATER_1 == 10) || (THERMISTORHEATER_2 == 10) || (THERMISTORHEATER_3 == 10) || (THERMISTORBED == 10)
add RepRapPro Huxley thermistor tables
2012-12-30 12:09:38 +01:00
// 100k RS thermistor 198-961 (4.7k pullup)
const short temptable_10[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 1 * OVERSAMPLENR, 929 },
{ 36 * OVERSAMPLENR, 299 },
{ 71 * OVERSAMPLENR, 246 },
{ 106 * OVERSAMPLENR, 217 },
{ 141 * OVERSAMPLENR, 198 },
{ 176 * OVERSAMPLENR, 184 },
{ 211 * OVERSAMPLENR, 173 },
{ 246 * OVERSAMPLENR, 163 },
{ 281 * OVERSAMPLENR, 154 },
{ 316 * OVERSAMPLENR, 147 },
{ 351 * OVERSAMPLENR, 140 },
{ 386 * OVERSAMPLENR, 134 },
{ 421 * OVERSAMPLENR, 128 },
{ 456 * OVERSAMPLENR, 122 },
{ 491 * OVERSAMPLENR, 117 },
{ 526 * OVERSAMPLENR, 112 },
{ 561 * OVERSAMPLENR, 107 },
{ 596 * OVERSAMPLENR, 102 },
{ 631 * OVERSAMPLENR, 97 },
{ 666 * OVERSAMPLENR, 91 },
{ 701 * OVERSAMPLENR, 86 },
{ 736 * OVERSAMPLENR, 81 },
{ 771 * OVERSAMPLENR, 76 },
{ 806 * OVERSAMPLENR, 70 },
{ 841 * OVERSAMPLENR, 63 },
{ 876 * OVERSAMPLENR, 56 },
{ 911 * OVERSAMPLENR, 48 },
{ 946 * OVERSAMPLENR, 38 },
{ 981 * OVERSAMPLENR, 23 },
{ 1005 * OVERSAMPLENR, 5 },
{ 1016 * OVERSAMPLENR, 0 }
add RepRapPro Huxley thermistor tables
2012-12-30 12:09:38 +01:00
};
#endif
fix wrong temptable index
2014-04-13 18:00:55 +02:00
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#if (THERMISTORHEATER_0 == 11) || (THERMISTORHEATER_1 == 11) || (THERMISTORHEATER_2 == 11) || (THERMISTORHEATER_3 == 11) || (THERMISTORBED == 11)
fix wrong temptable index
2014-04-13 18:00:55 +02:00
// QU-BD silicone bed QWG-104F-3950 thermistor
const short temptable_11[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 1 * OVERSAMPLENR, 938 },
{ 31 * OVERSAMPLENR, 314 },
{ 41 * OVERSAMPLENR, 290 },
{ 51 * OVERSAMPLENR, 272 },
{ 61 * OVERSAMPLENR, 258 },
{ 71 * OVERSAMPLENR, 247 },
{ 81 * OVERSAMPLENR, 237 },
{ 91 * OVERSAMPLENR, 229 },
{ 101 * OVERSAMPLENR, 221 },
{ 111 * OVERSAMPLENR, 215 },
{ 121 * OVERSAMPLENR, 209 },
{ 131 * OVERSAMPLENR, 204 },
{ 141 * OVERSAMPLENR, 199 },
{ 151 * OVERSAMPLENR, 195 },
{ 161 * OVERSAMPLENR, 190 },
{ 171 * OVERSAMPLENR, 187 },
{ 181 * OVERSAMPLENR, 183 },
{ 191 * OVERSAMPLENR, 179 },
{ 201 * OVERSAMPLENR, 176 },
{ 221 * OVERSAMPLENR, 170 },
{ 241 * OVERSAMPLENR, 165 },
{ 261 * OVERSAMPLENR, 160 },
{ 281 * OVERSAMPLENR, 155 },
{ 301 * OVERSAMPLENR, 150 },
{ 331 * OVERSAMPLENR, 144 },
{ 361 * OVERSAMPLENR, 139 },
{ 391 * OVERSAMPLENR, 133 },
{ 421 * OVERSAMPLENR, 128 },
{ 451 * OVERSAMPLENR, 123 },
{ 491 * OVERSAMPLENR, 117 },
{ 531 * OVERSAMPLENR, 111 },
{ 571 * OVERSAMPLENR, 105 },
{ 611 * OVERSAMPLENR, 100 },
{ 641 * OVERSAMPLENR, 95 },
{ 681 * OVERSAMPLENR, 90 },
{ 711 * OVERSAMPLENR, 85 },
{ 751 * OVERSAMPLENR, 79 },
{ 791 * OVERSAMPLENR, 72 },
{ 811 * OVERSAMPLENR, 69 },
{ 831 * OVERSAMPLENR, 65 },
{ 871 * OVERSAMPLENR, 57 },
{ 881 * OVERSAMPLENR, 55 },
{ 901 * OVERSAMPLENR, 51 },
{ 921 * OVERSAMPLENR, 45 },
{ 941 * OVERSAMPLENR, 39 },
{ 971 * OVERSAMPLENR, 28 },
{ 981 * OVERSAMPLENR, 23 },
{ 991 * OVERSAMPLENR, 17 },
{ 1001 * OVERSAMPLENR, 9 },
{ 1021 * OVERSAMPLENR, -27 }
This table is made for thermistor 3950 (can be found on ebay for cheap) it's caracteristics are : R25℃ ;100KΩ±1% B Value(R25/50℃)：3990K 1% Dissipation Factor(mW/℃)：1.1~1.6 In still Air Thermal Time Constant(S)：10~17 In Still Air Operating temperature range： (-50~+260°C) Dimension： 1.8mm Dia X4.1mm Lead Length ：30mm This table was found on the following blogs: http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/ and http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
2014-04-13 17:03:20 +02:00
};
#endif
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_0 == 13) || (THERMISTORHEATER_1 == 13) || (THERMISTORHEATER_2 == 13) || (THERMISTORHEATER_3 == 13) || (THERMISTORBED == 13)
Update thermistortables.h Add another thermistor table,use with hotend "Simple ONE" & "All in ONE"
2014-09-26 21:49:07 +02:00
// Hisens thermistor B25/50 =3950 +/-1%
Update line 627 ,wrong number on thermistortables Wrong number on line 627 > i change number "12" by the correct number "13" Soory
2014-10-06 14:21:44 +02:00
const short temptable_13[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 20.04 * OVERSAMPLENR, 300 },
{ 23.19 * OVERSAMPLENR, 290 },
{ 26.71 * OVERSAMPLENR, 280 },
{ 31.23 * OVERSAMPLENR, 270 },
{ 36.52 * OVERSAMPLENR, 260 },
{ 42.75 * OVERSAMPLENR, 250 },
{ 50.68 * OVERSAMPLENR, 240 },
{ 60.22 * OVERSAMPLENR, 230 },
{ 72.03 * OVERSAMPLENR, 220 },
{ 86.84 * OVERSAMPLENR, 210 },
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
{ 102.79 * OVERSAMPLENR, 200 },
{ 124.46 * OVERSAMPLENR, 190 },
{ 151.02 * OVERSAMPLENR, 180 },
{ 182.86 * OVERSAMPLENR, 170 },
{ 220.72 * OVERSAMPLENR, 160 },
{ 316.96 * OVERSAMPLENR, 140 },
{ 447.17 * OVERSAMPLENR, 120 },
{ 590.61 * OVERSAMPLENR, 100 },
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 737.31 * OVERSAMPLENR, 80 },
{ 857.77 * OVERSAMPLENR, 60 },
{ 939.52 * OVERSAMPLENR, 40 },
{ 986.03 * OVERSAMPLENR, 20 },
{ 1008.7 * OVERSAMPLENR, 0 }
Update thermistortables.h Add another thermistor table,use with hotend "Simple ONE" & "All in ONE"
2014-09-26 21:49:07 +02:00
Update thermistortables for Hisens Thermistor (PR#2588)
2015-08-09 18:55:45 +02:00
};
Update thermistortables.h Add another thermistor table,use with hotend "Simple ONE" & "All in ONE"
2014-09-26 21:49:07 +02:00
#endif
This table is made for thermistor 3950 (can be found on ebay for cheap) it's caracteristics are : R25℃ ;100KΩ±1% B Value(R25/50℃)：3990K 1% Dissipation Factor(mW/℃)：1.1~1.6 In still Air Thermal Time Constant(S)：10~17 In Still Air Operating temperature range： (-50~+260°C) Dimension： 1.8mm Dia X4.1mm Lead Length ：30mm This table was found on the following blogs: http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/ and http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
2014-04-13 17:03:20 +02:00
#if (THERMISTORHEATER_0 == 20) || (THERMISTORHEATER_1 == 20) || (THERMISTORHEATER_2 == 20) || (THERMISTORBED == 20) // PT100 with INA826 amp on Ultimaker v2.0 electronics
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
// The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature.
// This does not match the normal thermistor behaviour so we need to set the following defines
This table is made for thermistor 3950 (can be found on ebay for cheap) it's caracteristics are : R25℃ ;100KΩ±1% B Value(R25/50℃)：3990K 1% Dissipation Factor(mW/℃)：1.1~1.6 In still Air Thermal Time Constant(S)：10~17 In Still Air Operating temperature range： (-50~+260°C) Dimension： 1.8mm Dia X4.1mm Lead Length ：30mm This table was found on the following blogs: http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/ and http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
2014-04-13 17:03:20 +02:00
#if (THERMISTORHEATER_0 == 20)
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_0_RAW_HI_TEMP 16383
#define HEATER_0_RAW_LO_TEMP 0
This table is made for thermistor 3950 (can be found on ebay for cheap) it's caracteristics are : R25℃ ;100KΩ±1% B Value(R25/50℃)：3990K 1% Dissipation Factor(mW/℃)：1.1~1.6 In still Air Thermal Time Constant(S)：10~17 In Still Air Operating temperature range： (-50~+260°C) Dimension： 1.8mm Dia X4.1mm Lead Length ：30mm This table was found on the following blogs: http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/ and http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
2014-04-13 17:03:20 +02:00
#endif
#if (THERMISTORHEATER_1 == 20)
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_1_RAW_HI_TEMP 16383
#define HEATER_1_RAW_LO_TEMP 0
This table is made for thermistor 3950 (can be found on ebay for cheap) it's caracteristics are : R25℃ ;100KΩ±1% B Value(R25/50℃)：3990K 1% Dissipation Factor(mW/℃)：1.1~1.6 In still Air Thermal Time Constant(S)：10~17 In Still Air Operating temperature range： (-50~+260°C) Dimension： 1.8mm Dia X4.1mm Lead Length ：30mm This table was found on the following blogs: http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/ and http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
2014-04-13 17:03:20 +02:00
#endif
#if (THERMISTORHEATER_2 == 20)
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_2_RAW_HI_TEMP 16383
#define HEATER_2_RAW_LO_TEMP 0
This table is made for thermistor 3950 (can be found on ebay for cheap) it's caracteristics are : R25℃ ;100KΩ±1% B Value(R25/50℃)：3990K 1% Dissipation Factor(mW/℃)：1.1~1.6 In still Air Thermal Time Constant(S)：10~17 In Still Air Operating temperature range： (-50~+260°C) Dimension： 1.8mm Dia X4.1mm Lead Length ：30mm This table was found on the following blogs: http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/ and http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
2014-04-13 17:03:20 +02:00
#endif
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_3 == 20)
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_3_RAW_HI_TEMP 16383
#define HEATER_3_RAW_LO_TEMP 0
Add 4th extruder
2015-01-23 23:13:06 +01:00
#endif
This table is made for thermistor 3950 (can be found on ebay for cheap) it's caracteristics are : R25℃ ;100KΩ±1% B Value(R25/50℃)：3990K 1% Dissipation Factor(mW/℃)：1.1~1.6 In still Air Thermal Time Constant(S)：10~17 In Still Air Operating temperature range： (-50~+260°C) Dimension： 1.8mm Dia X4.1mm Lead Length ：30mm This table was found on the following blogs: http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/ and http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
2014-04-13 17:03:20 +02:00
#if (THERMISTORBED == 20)
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_BED_RAW_HI_TEMP 16383
#define HEATER_BED_RAW_LO_TEMP 0
This table is made for thermistor 3950 (can be found on ebay for cheap) it's caracteristics are : R25℃ ;100KΩ±1% B Value(R25/50℃)：3990K 1% Dissipation Factor(mW/℃)：1.1~1.6 In still Air Thermal Time Constant(S)：10~17 In Still Air Operating temperature range： (-50~+260°C) Dimension： 1.8mm Dia X4.1mm Lead Length ：30mm This table was found on the following blogs: http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/ and http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
2014-04-13 17:03:20 +02:00
#endif
const short temptable_20[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 0 * OVERSAMPLENR, 0 },
{ 227 * OVERSAMPLENR, 1 },
{ 236 * OVERSAMPLENR, 10 },
{ 245 * OVERSAMPLENR, 20 },
{ 253 * OVERSAMPLENR, 30 },
{ 262 * OVERSAMPLENR, 40 },
{ 270 * OVERSAMPLENR, 50 },
{ 279 * OVERSAMPLENR, 60 },
{ 287 * OVERSAMPLENR, 70 },
{ 295 * OVERSAMPLENR, 80 },
{ 304 * OVERSAMPLENR, 90 },
{ 312 * OVERSAMPLENR, 100 },
{ 320 * OVERSAMPLENR, 110 },
{ 329 * OVERSAMPLENR, 120 },
{ 337 * OVERSAMPLENR, 130 },
{ 345 * OVERSAMPLENR, 140 },
{ 353 * OVERSAMPLENR, 150 },
{ 361 * OVERSAMPLENR, 160 },
{ 369 * OVERSAMPLENR, 170 },
{ 377 * OVERSAMPLENR, 180 },
{ 385 * OVERSAMPLENR, 190 },
{ 393 * OVERSAMPLENR, 200 },
{ 401 * OVERSAMPLENR, 210 },
{ 409 * OVERSAMPLENR, 220 },
{ 417 * OVERSAMPLENR, 230 },
{ 424 * OVERSAMPLENR, 240 },
{ 432 * OVERSAMPLENR, 250 },
{ 440 * OVERSAMPLENR, 260 },
{ 447 * OVERSAMPLENR, 270 },
{ 455 * OVERSAMPLENR, 280 },
{ 463 * OVERSAMPLENR, 290 },
{ 470 * OVERSAMPLENR, 300 },
{ 478 * OVERSAMPLENR, 310 },
{ 485 * OVERSAMPLENR, 320 },
{ 493 * OVERSAMPLENR, 330 },
{ 500 * OVERSAMPLENR, 340 },
{ 507 * OVERSAMPLENR, 350 },
{ 515 * OVERSAMPLENR, 360 },
{ 522 * OVERSAMPLENR, 370 },
{ 529 * OVERSAMPLENR, 380 },
{ 537 * OVERSAMPLENR, 390 },
{ 544 * OVERSAMPLENR, 400 },
{ 614 * OVERSAMPLENR, 500 },
{ 681 * OVERSAMPLENR, 600 },
{ 744 * OVERSAMPLENR, 700 },
{ 805 * OVERSAMPLENR, 800 },
{ 862 * OVERSAMPLENR, 900 },
{ 917 * OVERSAMPLENR, 1000 },
{ 968 * OVERSAMPLENR, 1100 }
This table is made for thermistor 3950 (can be found on ebay for cheap) it's caracteristics are : R25℃ ;100KΩ±1% B Value(R25/50℃)：3990K 1% Dissipation Factor(mW/℃)：1.1~1.6 In still Air Thermal Time Constant(S)：10~17 In Still Air Operating temperature range： (-50~+260°C) Dimension： 1.8mm Dia X4.1mm Lead Length ：30mm This table was found on the following blogs: http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/ and http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
2014-04-13 17:03:20 +02:00
};
#endif
Added thermistor tables
2011-11-04 22:51:14 +01:00
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_0 == 51) || (THERMISTORHEATER_1 == 51) || (THERMISTORHEATER_2 == 51) || (THERMISTORHEATER_3 == 51) || (THERMISTORBED == 51)
Update Marlin/thermistortables.h
2012-05-20 12:35:28 +02:00
// 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
Update Marlin/thermistortables.h
2012-05-20 12:55:22 +02:00
// Verified by linagee.
Update Marlin/thermistortables.h
2012-05-20 12:35:28 +02:00
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
Update Marlin/thermistortables.h
2012-05-19 13:52:12 +02:00
// Advantage: Twice the resolution and better linearity from 150C to 200C
Update Marlin/thermistortables.h
2012-05-20 12:35:28 +02:00
const short temptable_51[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 1 * OVERSAMPLENR, 350 },
{ 190 * OVERSAMPLENR, 250 }, // top rating 250C
{ 203 * OVERSAMPLENR, 245 },
{ 217 * OVERSAMPLENR, 240 },
{ 232 * OVERSAMPLENR, 235 },
{ 248 * OVERSAMPLENR, 230 },
{ 265 * OVERSAMPLENR, 225 },
{ 283 * OVERSAMPLENR, 220 },
{ 302 * OVERSAMPLENR, 215 },
{ 322 * OVERSAMPLENR, 210 },
{ 344 * OVERSAMPLENR, 205 },
{ 366 * OVERSAMPLENR, 200 },
{ 390 * OVERSAMPLENR, 195 },
{ 415 * OVERSAMPLENR, 190 },
{ 440 * OVERSAMPLENR, 185 },
{ 467 * OVERSAMPLENR, 180 },
{ 494 * OVERSAMPLENR, 175 },
{ 522 * OVERSAMPLENR, 170 },
{ 551 * OVERSAMPLENR, 165 },
{ 580 * OVERSAMPLENR, 160 },
{ 609 * OVERSAMPLENR, 155 },
{ 638 * OVERSAMPLENR, 150 },
{ 666 * OVERSAMPLENR, 145 },
{ 695 * OVERSAMPLENR, 140 },
{ 722 * OVERSAMPLENR, 135 },
{ 749 * OVERSAMPLENR, 130 },
{ 775 * OVERSAMPLENR, 125 },
{ 800 * OVERSAMPLENR, 120 },
{ 823 * OVERSAMPLENR, 115 },
{ 845 * OVERSAMPLENR, 110 },
{ 865 * OVERSAMPLENR, 105 },
{ 884 * OVERSAMPLENR, 100 },
{ 901 * OVERSAMPLENR, 95 },
{ 917 * OVERSAMPLENR, 90 },
{ 932 * OVERSAMPLENR, 85 },
{ 944 * OVERSAMPLENR, 80 },
{ 956 * OVERSAMPLENR, 75 },
{ 966 * OVERSAMPLENR, 70 },
{ 975 * OVERSAMPLENR, 65 },
{ 982 * OVERSAMPLENR, 60 },
{ 989 * OVERSAMPLENR, 55 },
{ 995 * OVERSAMPLENR, 50 },
{ 1000 * OVERSAMPLENR, 45 },
{ 1004 * OVERSAMPLENR, 40 },
{ 1007 * OVERSAMPLENR, 35 },
{ 1010 * OVERSAMPLENR, 30 },
{ 1013 * OVERSAMPLENR, 25 },
{ 1015 * OVERSAMPLENR, 20 },
{ 1017 * OVERSAMPLENR, 15 },
{ 1018 * OVERSAMPLENR, 10 },
{ 1019 * OVERSAMPLENR, 5 },
{ 1020 * OVERSAMPLENR, 0 },
{ 1021 * OVERSAMPLENR, -5 }
Update Marlin/thermistortables.h
2012-05-19 13:52:12 +02:00
};
#endif
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#if (THERMISTORHEATER_0 == 52) || (THERMISTORHEATER_1 == 52) || (THERMISTORHEATER_2 == 52) || (THERMISTORHEATER_3 == 52) || (THERMISTORBED == 52)
Update Marlin/thermistortables.h
2012-05-20 12:35:28 +02:00
// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
// Advantage: More resolution and better linearity from 150C to 200C
const short temptable_52[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 1 * OVERSAMPLENR, 500 },
{ 125 * OVERSAMPLENR, 300 }, // top rating 300C
{ 142 * OVERSAMPLENR, 290 },
{ 162 * OVERSAMPLENR, 280 },
{ 185 * OVERSAMPLENR, 270 },
{ 211 * OVERSAMPLENR, 260 },
{ 240 * OVERSAMPLENR, 250 },
{ 274 * OVERSAMPLENR, 240 },
{ 312 * OVERSAMPLENR, 230 },
{ 355 * OVERSAMPLENR, 220 },
{ 401 * OVERSAMPLENR, 210 },
{ 452 * OVERSAMPLENR, 200 },
{ 506 * OVERSAMPLENR, 190 },
{ 563 * OVERSAMPLENR, 180 },
{ 620 * OVERSAMPLENR, 170 },
{ 677 * OVERSAMPLENR, 160 },
{ 732 * OVERSAMPLENR, 150 },
{ 783 * OVERSAMPLENR, 140 },
{ 830 * OVERSAMPLENR, 130 },
{ 871 * OVERSAMPLENR, 120 },
{ 906 * OVERSAMPLENR, 110 },
{ 935 * OVERSAMPLENR, 100 },
{ 958 * OVERSAMPLENR, 90 },
{ 976 * OVERSAMPLENR, 80 },
{ 990 * OVERSAMPLENR, 70 },
{ 1000 * OVERSAMPLENR, 60 },
{ 1008 * OVERSAMPLENR, 50 },
{ 1013 * OVERSAMPLENR, 40 },
{ 1017 * OVERSAMPLENR, 30 },
{ 1019 * OVERSAMPLENR, 20 },
{ 1021 * OVERSAMPLENR, 10 },
{ 1022 * OVERSAMPLENR, 0 }
Update Marlin/thermistortables.h
2012-05-20 12:35:28 +02:00
};
#endif
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#if (THERMISTORHEATER_0 == 55) || (THERMISTORHEATER_1 == 55) || (THERMISTORHEATER_2 == 55) || (THERMISTORHEATER_3 == 55) || (THERMISTORBED == 55)
Update Marlin/thermistortables.h
2012-05-20 21:18:45 +02:00
// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
// Advantage: More resolution and better linearity from 150C to 200C
Correct temptable_55 name.
2012-08-28 19:47:22 +02:00
const short temptable_55[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 1 * OVERSAMPLENR, 500 },
{ 76 * OVERSAMPLENR, 300 },
{ 87 * OVERSAMPLENR, 290 },
{ 100 * OVERSAMPLENR, 280 },
{ 114 * OVERSAMPLENR, 270 },
{ 131 * OVERSAMPLENR, 260 },
{ 152 * OVERSAMPLENR, 250 },
{ 175 * OVERSAMPLENR, 240 },
{ 202 * OVERSAMPLENR, 230 },
{ 234 * OVERSAMPLENR, 220 },
{ 271 * OVERSAMPLENR, 210 },
{ 312 * OVERSAMPLENR, 200 },
{ 359 * OVERSAMPLENR, 190 },
{ 411 * OVERSAMPLENR, 180 },
{ 467 * OVERSAMPLENR, 170 },
{ 527 * OVERSAMPLENR, 160 },
{ 590 * OVERSAMPLENR, 150 },
{ 652 * OVERSAMPLENR, 140 },
{ 713 * OVERSAMPLENR, 130 },
{ 770 * OVERSAMPLENR, 120 },
{ 822 * OVERSAMPLENR, 110 },
{ 867 * OVERSAMPLENR, 100 },
{ 905 * OVERSAMPLENR, 90 },
{ 936 * OVERSAMPLENR, 80 },
{ 961 * OVERSAMPLENR, 70 },
{ 979 * OVERSAMPLENR, 60 },
{ 993 * OVERSAMPLENR, 50 },
{ 1003 * OVERSAMPLENR, 40 },
{ 1010 * OVERSAMPLENR, 30 },
{ 1015 * OVERSAMPLENR, 20 },
{ 1018 * OVERSAMPLENR, 10 },
{ 1020 * OVERSAMPLENR, 0 }
Update Marlin/thermistortables.h
2012-05-20 21:18:45 +02:00
};
#endif
Update Marlin/thermistortables.h
2012-05-20 12:35:28 +02:00
fix spelling Thermister -> Thermistor
2016-03-21 12:57:03 +01:00
#if (THERMISTORHEATER_0 == 60) || (THERMISTORHEATER_1 == 60) || (THERMISTORHEATER_2 == 60) || (THERMISTORHEATER_3 == 60) || (THERMISTORBED == 60) // Maker's Tool Works Kapton Bed Thermistor
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=3950
thermistortables.h: Add comments that table 60 uses beta=3950.
2014-03-27 04:41:10 +01:00
// r0: 100000
// t0: 25
// r1: 0 (parallel with rTherm)
// r2: 4700 (series with rTherm)
// beta: 3950
// min adc: 1 at 0.0048828125 V
// max adc: 1023 at 4.9951171875 V
Adding Maker's Tool Works heated bed thermistor
2013-03-19 04:53:37 +01:00
const short temptable_60[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 51 * OVERSAMPLENR, 272 },
{ 61 * OVERSAMPLENR, 258 },
{ 71 * OVERSAMPLENR, 247 },
{ 81 * OVERSAMPLENR, 237 },
{ 91 * OVERSAMPLENR, 229 },
{ 101 * OVERSAMPLENR, 221 },
{ 131 * OVERSAMPLENR, 204 },
{ 161 * OVERSAMPLENR, 190 },
{ 191 * OVERSAMPLENR, 179 },
{ 231 * OVERSAMPLENR, 167 },
{ 271 * OVERSAMPLENR, 157 },
{ 311 * OVERSAMPLENR, 148 },
{ 351 * OVERSAMPLENR, 140 },
{ 381 * OVERSAMPLENR, 135 },
{ 411 * OVERSAMPLENR, 130 },
{ 441 * OVERSAMPLENR, 125 },
{ 451 * OVERSAMPLENR, 123 },
{ 461 * OVERSAMPLENR, 122 },
{ 471 * OVERSAMPLENR, 120 },
{ 481 * OVERSAMPLENR, 119 },
{ 491 * OVERSAMPLENR, 117 },
{ 501 * OVERSAMPLENR, 116 },
{ 511 * OVERSAMPLENR, 114 },
{ 521 * OVERSAMPLENR, 113 },
{ 531 * OVERSAMPLENR, 111 },
{ 541 * OVERSAMPLENR, 110 },
{ 551 * OVERSAMPLENR, 108 },
{ 561 * OVERSAMPLENR, 107 },
{ 571 * OVERSAMPLENR, 105 },
{ 581 * OVERSAMPLENR, 104 },
{ 591 * OVERSAMPLENR, 102 },
{ 601 * OVERSAMPLENR, 101 },
{ 611 * OVERSAMPLENR, 100 },
{ 621 * OVERSAMPLENR, 98 },
{ 631 * OVERSAMPLENR, 97 },
{ 641 * OVERSAMPLENR, 95 },
{ 651 * OVERSAMPLENR, 94 },
{ 661 * OVERSAMPLENR, 92 },
{ 671 * OVERSAMPLENR, 91 },
{ 681 * OVERSAMPLENR, 90 },
{ 691 * OVERSAMPLENR, 88 },
{ 701 * OVERSAMPLENR, 87 },
{ 711 * OVERSAMPLENR, 85 },
{ 721 * OVERSAMPLENR, 84 },
{ 731 * OVERSAMPLENR, 82 },
{ 741 * OVERSAMPLENR, 81 },
{ 751 * OVERSAMPLENR, 79 },
{ 761 * OVERSAMPLENR, 77 },
{ 771 * OVERSAMPLENR, 76 },
{ 781 * OVERSAMPLENR, 74 },
{ 791 * OVERSAMPLENR, 72 },
{ 801 * OVERSAMPLENR, 71 },
{ 811 * OVERSAMPLENR, 69 },
{ 821 * OVERSAMPLENR, 67 },
{ 831 * OVERSAMPLENR, 65 },
{ 841 * OVERSAMPLENR, 63 },
{ 851 * OVERSAMPLENR, 62 },
{ 861 * OVERSAMPLENR, 60 },
{ 871 * OVERSAMPLENR, 57 },
{ 881 * OVERSAMPLENR, 55 },
{ 891 * OVERSAMPLENR, 53 },
{ 901 * OVERSAMPLENR, 51 },
{ 911 * OVERSAMPLENR, 48 },
{ 921 * OVERSAMPLENR, 45 },
{ 931 * OVERSAMPLENR, 42 },
{ 941 * OVERSAMPLENR, 39 },
{ 951 * OVERSAMPLENR, 36 },
{ 961 * OVERSAMPLENR, 32 },
{ 981 * OVERSAMPLENR, 23 },
{ 991 * OVERSAMPLENR, 17 },
{ 1001 * OVERSAMPLENR, 9 },
{ 1008 * OVERSAMPLENR, 0 }
Adding Maker's Tool Works heated bed thermistor
2013-03-19 04:53:37 +01:00
};
#endif
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
Allow Thermistor #12 to be used on hotends also //100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) Caveat Emptor —- I’m not sure that this really makes sense, but why keep someone from using it?
2015-12-10 12:13:10 +01:00
#if (THERMISTORHEATER_0 == 12) || (THERMISTORHEATER_1 == 12) || (THERMISTORHEATER_2 == 12) || (THERMISTORHEATER_3 == 12) || (THERMISTORBED == 12)
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
// 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed
2014-04-24 10:49:42 +02:00
const short temptable_12[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 35 * OVERSAMPLENR, 180 }, // top rating 180C
{ 211 * OVERSAMPLENR, 140 },
{ 233 * OVERSAMPLENR, 135 },
{ 261 * OVERSAMPLENR, 130 },
{ 290 * OVERSAMPLENR, 125 },
{ 328 * OVERSAMPLENR, 120 },
{ 362 * OVERSAMPLENR, 115 },
{ 406 * OVERSAMPLENR, 110 },
{ 446 * OVERSAMPLENR, 105 },
{ 496 * OVERSAMPLENR, 100 },
{ 539 * OVERSAMPLENR, 95 },
{ 585 * OVERSAMPLENR, 90 },
{ 629 * OVERSAMPLENR, 85 },
{ 675 * OVERSAMPLENR, 80 },
{ 718 * OVERSAMPLENR, 75 },
{ 758 * OVERSAMPLENR, 70 },
{ 793 * OVERSAMPLENR, 65 },
{ 822 * OVERSAMPLENR, 60 },
{ 841 * OVERSAMPLENR, 55 },
{ 875 * OVERSAMPLENR, 50 },
{ 899 * OVERSAMPLENR, 45 },
{ 926 * OVERSAMPLENR, 40 },
{ 946 * OVERSAMPLENR, 35 },
{ 962 * OVERSAMPLENR, 30 },
{ 977 * OVERSAMPLENR, 25 },
{ 987 * OVERSAMPLENR, 20 },
{ 995 * OVERSAMPLENR, 15 },
{ 1001 * OVERSAMPLENR, 10 },
{ 1010 * OVERSAMPLENR, 0 },
{ 1023 * OVERSAMPLENR, -40 }
Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed
2014-04-24 10:49:42 +02:00
};
#endif
Adding Maker's Tool Works heated bed thermistor
2013-03-19 04:53:37 +01:00
Added configuration example for the BQ Hephestos 2 3D printer. Added support for BQ ZUM Mega 3D board and stock Hephestos 2 thermistor.
2016-02-27 20:17:07 +01:00
#if (THERMISTORHEATER_0 == 70) || (THERMISTORHEATER_1 == 70) || (THERMISTORHEATER_2 == 70) || (THERMISTORHEATER_3 == 70) || (THERMISTORBED == 70) // bqh2 stock thermistor
const short temptable_70[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 22 * OVERSAMPLENR, 300 },
{ 24 * OVERSAMPLENR, 295 },
{ 25 * OVERSAMPLENR, 290 },
{ 27 * OVERSAMPLENR, 285 },
{ 29 * OVERSAMPLENR, 280 },
{ 32 * OVERSAMPLENR, 275 },
{ 34 * OVERSAMPLENR, 270 },
{ 37 * OVERSAMPLENR, 265 },
{ 40 * OVERSAMPLENR, 260 },
{ 43 * OVERSAMPLENR, 255 },
{ 46 * OVERSAMPLENR, 250 },
{ 50 * OVERSAMPLENR, 245 },
{ 54 * OVERSAMPLENR, 240 },
{ 59 * OVERSAMPLENR, 235 },
{ 64 * OVERSAMPLENR, 230 },
{ 70 * OVERSAMPLENR, 225 },
{ 76 * OVERSAMPLENR, 220 },
{ 83 * OVERSAMPLENR, 215 },
{ 90 * OVERSAMPLENR, 210 },
{ 99 * OVERSAMPLENR, 205 },
{ 108 * OVERSAMPLENR, 200 },
{ 118 * OVERSAMPLENR, 195 },
{ 129 * OVERSAMPLENR, 190 },
{ 141 * OVERSAMPLENR, 185 },
{ 154 * OVERSAMPLENR, 180 },
{ 169 * OVERSAMPLENR, 175 },
{ 185 * OVERSAMPLENR, 170 },
{ 203 * OVERSAMPLENR, 165 },
{ 222 * OVERSAMPLENR, 160 },
{ 243 * OVERSAMPLENR, 155 },
{ 266 * OVERSAMPLENR, 150 },
{ 290 * OVERSAMPLENR, 145 },
{ 317 * OVERSAMPLENR, 140 },
{ 346 * OVERSAMPLENR, 135 },
{ 376 * OVERSAMPLENR, 130 },
{ 408 * OVERSAMPLENR, 125 },
{ 442 * OVERSAMPLENR, 120 },
{ 477 * OVERSAMPLENR, 115 },
{ 513 * OVERSAMPLENR, 110 },
{ 551 * OVERSAMPLENR, 105 },
{ 588 * OVERSAMPLENR, 100 },
{ 626 * OVERSAMPLENR, 95 },
{ 663 * OVERSAMPLENR, 90 },
{ 699 * OVERSAMPLENR, 85 },
{ 735 * OVERSAMPLENR, 80 },
{ 768 * OVERSAMPLENR, 75 },
{ 800 * OVERSAMPLENR, 70 },
{ 829 * OVERSAMPLENR, 65 },
{ 856 * OVERSAMPLENR, 60 },
{ 881 * OVERSAMPLENR, 55 },
{ 903 * OVERSAMPLENR, 50 },
{ 922 * OVERSAMPLENR, 45 },
{ 939 * OVERSAMPLENR, 40 },
{ 954 * OVERSAMPLENR, 35 },
{ 966 * OVERSAMPLENR, 30 },
{ 977 * OVERSAMPLENR, 25 },
{ 986 * OVERSAMPLENR, 20 },
{ 994 * OVERSAMPLENR, 15 },
{ 1000 * OVERSAMPLENR, 10 },
{ 1005 * OVERSAMPLENR, 5 },
{ 1009 * OVERSAMPLENR, 0 } // safety
Added configuration example for the BQ Hephestos 2 3D printer. Added support for BQ ZUM Mega 3D board and stock Hephestos 2 thermistor.
2016-02-27 20:17:07 +01:00
};
#endif
Pt100 and Pt1000 temperature sensors handling
2014-02-14 12:15:31 +01:00
// Pt1000 and Pt100 handling
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
//
Pt100 and Pt1000 temperature sensors handling
2014-02-14 12:15:31 +01:00
// Rt=R0*(1+a*T+b*T*T) [for T>0]
// a=3.9083E-3, b=-5.775E-7
#define PtA 3.9083E-3
#define PtB -5.775E-7
#define PtRt(T,R0) ((R0)*(1.0+(PtA)*(T)+(PtB)*(T)*(T)))
#define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1))
#define PtLine(T,R0,Rup) { PtAdVal(T,R0,Rup)*OVERSAMPLENR, T },
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_0 == 110) || (THERMISTORHEATER_1 == 110) || (THERMISTORHEATER_2 == 110) || (THERMISTORHEATER_3 == 110) || (THERMISTORBED == 110) // Pt100 with 1k0 pullup
Pt100 and Pt1000 temperature sensors handling
2014-02-14 12:15:31 +01:00
const short temptable_110[][2] PROGMEM = {
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
// only few values are needed as the curve is very flat
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
PtLine( 0, 100, 1000)
PtLine( 50, 100, 1000)
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
PtLine(100, 100, 1000)
PtLine(150, 100, 1000)
PtLine(200, 100, 1000)
PtLine(250, 100, 1000)
PtLine(300, 100, 1000)
Pt100 and Pt1000 temperature sensors handling
2014-02-14 12:15:31 +01:00
};
#endif
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_0 == 147) || (THERMISTORHEATER_1 == 147) || (THERMISTORHEATER_2 == 147) || (THERMISTORHEATER_3 == 147) || (THERMISTORBED == 147) // Pt100 with 4k7 pullup
Pt100 and Pt1000 temperature sensors handling
2014-02-14 12:15:31 +01:00
const short temptable_147[][2] PROGMEM = {
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
// only few values are needed as the curve is very flat
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
PtLine( 0, 100, 4700)
PtLine( 50, 100, 4700)
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
PtLine(100, 100, 4700)
PtLine(150, 100, 4700)
PtLine(200, 100, 4700)
PtLine(250, 100, 4700)
PtLine(300, 100, 4700)
Pt100 and Pt1000 temperature sensors handling
2014-02-14 12:15:31 +01:00
};
#endif
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_0 == 1010) || (THERMISTORHEATER_1 == 1010) || (THERMISTORHEATER_2 == 1010) || (THERMISTORHEATER_3 == 1010) || (THERMISTORBED == 1010) // Pt1000 with 1k0 pullup
Pt100 and Pt1000 temperature sensors handling
2014-02-14 12:15:31 +01:00
const short temptable_1010[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
PtLine( 0, 1000, 1000)
PtLine( 25, 1000, 1000)
PtLine( 50, 1000, 1000)
PtLine( 75, 1000, 1000)
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
PtLine(100, 1000, 1000)
PtLine(125, 1000, 1000)
PtLine(150, 1000, 1000)
PtLine(175, 1000, 1000)
PtLine(200, 1000, 1000)
PtLine(225, 1000, 1000)
PtLine(250, 1000, 1000)
PtLine(275, 1000, 1000)
PtLine(300, 1000, 1000)
Pt100 and Pt1000 temperature sensors handling
2014-02-14 12:15:31 +01:00
};
#endif
Add 4th extruder
2015-01-23 23:13:06 +01:00
#if (THERMISTORHEATER_0 == 1047) || (THERMISTORHEATER_1 == 1047) || (THERMISTORHEATER_2 == 1047) || (THERMISTORHEATER_3 == 1047) || (THERMISTORBED == 1047) // Pt1000 with 4k7 pullup
Pt100 and Pt1000 temperature sensors handling
2014-02-14 12:15:31 +01:00
const short temptable_1047[][2] PROGMEM = {
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
// only few values are needed as the curve is very flat
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
PtLine( 0, 1000, 4700)
PtLine( 50, 1000, 4700)
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
PtLine(100, 1000, 4700)
PtLine(150, 1000, 4700)
PtLine(200, 1000, 4700)
PtLine(250, 1000, 4700)
PtLine(300, 1000, 4700)
Pt100 and Pt1000 temperature sensors handling
2014-02-14 12:15:31 +01:00
};
#endif
Adding Maker's Tool Works heated bed thermistor
2013-03-19 04:53:37 +01:00
Dummy Thermistor Table for testing purposes Am I the only one who always need to change the thermistortable.h to add a dummy table?? Ok, it is done. Just set the thermistor to 999 and it will always read 25C. Great for Testing or Development purposes.
2015-02-22 15:02:04 +01:00
#if (THERMISTORHEATER_0 == 999) || (THERMISTORHEATER_1 == 999) || (THERMISTORHEATER_2 == 999) || (THERMISTORHEATER_3 == 999) || (THERMISTORBED == 999) //User defined table
Extend the idea of dummy temperature sensors. Added a second sensor and made them configurable.
2015-02-24 11:02:16 +01:00
// Dummy Thermistor table.. It will ALWAYS read a fixed value.
#ifndef DUMMY_THERMISTOR_999_VALUE
#define DUMMY_THERMISTOR_999_VALUE 25
#endif
const short temptable_999[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 1 * OVERSAMPLENR, DUMMY_THERMISTOR_999_VALUE },
{ 1023 * OVERSAMPLENR, DUMMY_THERMISTOR_999_VALUE }
Dummy Thermistor Table for testing purposes Am I the only one who always need to change the thermistortable.h to add a dummy table?? Ok, it is done. Just set the thermistor to 999 and it will always read 25C. Great for Testing or Development purposes.
2015-02-22 15:02:04 +01:00
};
#endif
Extend the idea of dummy temperature sensors. Added a second sensor and made them configurable.
2015-02-24 11:02:16 +01:00
#if (THERMISTORHEATER_0 == 998) || (THERMISTORHEATER_1 == 998) || (THERMISTORHEATER_2 == 998) || (THERMISTORHEATER_3 == 998) || (THERMISTORBED == 998) //User defined table
// Dummy Thermistor table.. It will ALWAYS read a fixed value.
#ifndef DUMMY_THERMISTOR_998_VALUE
#define DUMMY_THERMISTOR_998_VALUE 25
#endif
const short temptable_998[][2] PROGMEM = {
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
{ 1 * OVERSAMPLENR, DUMMY_THERMISTOR_998_VALUE },
{ 1023 * OVERSAMPLENR, DUMMY_THERMISTOR_998_VALUE }
Extend the idea of dummy temperature sensors. Added a second sensor and made them configurable.
2015-02-24 11:02:16 +01:00
};
#endif
Dummy Thermistor Table for testing purposes Am I the only one who always need to change the thermistortable.h to add a dummy table?? Ok, it is done. Just set the thermistor to 999 and it will always read 25C. Great for Testing or Development purposes.
2015-02-22 15:02:04 +01:00
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 05:33:33 +01:00
#define _TT_NAME(_N) temptable_ ## _N
#define TT_NAME(_N) _TT_NAME(_N)
Added thermistor tables
2011-11-04 22:51:14 +01:00
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 05:33:33 +01:00
#ifdef THERMISTORHEATER_0
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_0_TEMPTABLE TT_NAME(THERMISTORHEATER_0)
#define HEATER_0_TEMPTABLE_LEN COUNT(HEATER_0_TEMPTABLE)
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 05:33:33 +01:00
#else
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#ifdef HEATER_0_USES_THERMISTOR
Enclose all #error strings with apostrophes
2016-05-13 14:10:23 +02:00
#error "No heater 0 thermistor table specified"
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#else // HEATER_0_USES_THERMISTOR
#define HEATER_0_TEMPTABLE NULL
#define HEATER_0_TEMPTABLE_LEN 0
#endif // HEATER_0_USES_THERMISTOR
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.
2012-12-09 23:00:06 +01:00
#endif
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
// Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.
2012-12-09 23:00:06 +01:00
#ifndef HEATER_0_RAW_HI_TEMP
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
#ifdef HEATER_0_USES_THERMISTOR // In case of a thermistor the highest temperature results in the lowest ADC value
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_0_RAW_HI_TEMP 0
#define HEATER_0_RAW_LO_TEMP 16383
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
#else // In case of an thermocouple the highest temperature results in the highest ADC value
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_0_RAW_HI_TEMP 16383
#define HEATER_0_RAW_LO_TEMP 0
#endif
Temperature changes
2011-11-05 19:21:36 +01:00
#endif
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 05:33:33 +01:00
#ifdef THERMISTORHEATER_1
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_1_TEMPTABLE TT_NAME(THERMISTORHEATER_1)
#define HEATER_1_TEMPTABLE_LEN COUNT(HEATER_1_TEMPTABLE)
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 05:33:33 +01:00
#else
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#ifdef HEATER_1_USES_THERMISTOR
Enclose all #error strings with apostrophes
2016-05-13 14:10:23 +02:00
#error "No heater 1 thermistor table specified"
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#else // HEATER_1_USES_THERMISTOR
#define HEATER_1_TEMPTABLE NULL
#define HEATER_1_TEMPTABLE_LEN 0
#endif // HEATER_1_USES_THERMISTOR
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.
2012-12-09 23:00:06 +01:00
#endif
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
// Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.
2012-12-09 23:00:06 +01:00
#ifndef HEATER_1_RAW_HI_TEMP
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
#ifdef HEATER_1_USES_THERMISTOR // In case of a thermistor the highest temperature results in the lowest ADC value
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_1_RAW_HI_TEMP 0
#define HEATER_1_RAW_LO_TEMP 16383
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
#else // In case of an thermocouple the highest temperature results in the highest ADC value
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_1_RAW_HI_TEMP 16383
#define HEATER_1_RAW_LO_TEMP 0
#endif
Added thermistor tables
2011-11-04 22:51:14 +01:00
#endif
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 05:33:33 +01:00
#ifdef THERMISTORHEATER_2
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_2_TEMPTABLE TT_NAME(THERMISTORHEATER_2)
#define HEATER_2_TEMPTABLE_LEN COUNT(HEATER_2_TEMPTABLE)
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 05:33:33 +01:00
#else
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#ifdef HEATER_2_USES_THERMISTOR
Enclose all #error strings with apostrophes
2016-05-13 14:10:23 +02:00
#error "No heater 2 thermistor table specified"
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#else // HEATER_2_USES_THERMISTOR
#define HEATER_2_TEMPTABLE NULL
#define HEATER_2_TEMPTABLE_LEN 0
#endif // HEATER_2_USES_THERMISTOR
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.
2012-12-09 23:00:06 +01:00
#endif
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
// Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.
2012-12-09 23:00:06 +01:00
#ifndef HEATER_2_RAW_HI_TEMP
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
#ifdef HEATER_2_USES_THERMISTOR // In case of a thermistor the highest temperature results in the lowest ADC value
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_2_RAW_HI_TEMP 0
#define HEATER_2_RAW_LO_TEMP 16383
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
#else // In case of an thermocouple the highest temperature results in the highest ADC value
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_2_RAW_HI_TEMP 16383
#define HEATER_2_RAW_LO_TEMP 0
#endif
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 05:33:33 +01:00
#endif
first commit
2011-08-12 22:28:35 +02:00
Add 4th extruder
2015-01-23 23:13:06 +01:00
#ifdef THERMISTORHEATER_3
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_3_TEMPTABLE TT_NAME(THERMISTORHEATER_3)
#define HEATER_3_TEMPTABLE_LEN COUNT(HEATER_3_TEMPTABLE)
Add 4th extruder
2015-01-23 23:13:06 +01:00
#else
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#ifdef HEATER_3_USES_THERMISTOR
Enclose all #error strings with apostrophes
2016-05-13 14:10:23 +02:00
#error "No heater 3 thermistor table specified"
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#else // HEATER_3_USES_THERMISTOR
#define HEATER_3_TEMPTABLE NULL
#define HEATER_3_TEMPTABLE_LEN 0
#endif // HEATER_3_USES_THERMISTOR
Add 4th extruder
2015-01-23 23:13:06 +01:00
#endif
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
// Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
Add 4th extruder
2015-01-23 23:13:06 +01:00
#ifndef HEATER_3_RAW_HI_TEMP
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
#ifdef HEATER_3_USES_THERMISTOR // In case of a thermistor the highest temperature results in the lowest ADC value
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_3_RAW_HI_TEMP 0
#define HEATER_3_RAW_LO_TEMP 16383
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
#else // In case of an thermocouple the highest temperature results in the highest ADC value
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_3_RAW_HI_TEMP 16383
#define HEATER_3_RAW_LO_TEMP 0
#endif
Add 4th extruder
2015-01-23 23:13:06 +01:00
#endif
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 05:33:33 +01:00
#ifdef THERMISTORBED
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define BEDTEMPTABLE TT_NAME(THERMISTORBED)
#define BEDTEMPTABLE_LEN COUNT(BEDTEMPTABLE)
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 05:33:33 +01:00
#else
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#ifdef BED_USES_THERMISTOR
Enclose all #error strings with apostrophes
2016-05-13 14:10:23 +02:00
#error "No bed thermistor table specified"
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#endif // BED_USES_THERMISTOR
Added thermistor tables
2011-11-04 22:51:14 +01:00
#endif
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
// Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.
2012-12-09 23:00:06 +01:00
#ifndef HEATER_BED_RAW_HI_TEMP
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
#ifdef BED_USES_THERMISTOR // In case of a thermistor the highest temperature results in the lowest ADC value
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_BED_RAW_HI_TEMP 0
#define HEATER_BED_RAW_LO_TEMP 16383
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
#else // In case of an thermocouple the highest temperature results in the highest ADC value
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define HEATER_BED_RAW_HI_TEMP 16383
#define HEATER_BED_RAW_LO_TEMP 0
#endif
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.
2012-12-09 23:00:06 +01:00
#endif
Added thermistor tables
2011-11-04 22:51:14 +01:00
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array
2016-06-20 20:53:55 +02:00
#endif // THERMISTORTABLES_H_
Reference in New Issue Copy Permalink