Firmware2/buildroot/share/PlatformIO/variants/MARLIN_F446Zx_TRONXY/variant.h

244 lines
6.0 KiB
C
Raw Normal View History

2022-10-18 05:41:41 +02:00
/*
Copyright (c) 2011 Arduino. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _VARIANT_ARDUINO_STM32_
#define _VARIANT_ARDUINO_STM32_
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
extern unsigned long myvar[];
void myshow(int fre, int times);
void debugStr(const char *str);
2022-10-18 05:41:41 +02:00
/*----------------------------------------------------------------------------
* Pins
*----------------------------------------------------------------------------*/
#define PA0 0x00
#define PA1 0x01
#define PA2 0x02
#define PA3 0x03
#define PA4 0x04
#define PA5 0x05
#define PA6 0x06
#define PA7 0x07
#define PA8 0x08
#define PA9 0x09
#define PA10 0x0A
#define PA11 0x0B
#define PA12 0x0C
#define PA13 0x0D
#define PA14 0x0E
#define PA15 0x0F
#define PB0 0x10
#define PB1 0x11
#define PB2 0x12
#define PB3 0x13
#define PB4 0x14
#define PB5 0x15
#define PB6 0x16
#define PB7 0x17 // 36 pins (F103T)
#define PB8 0x18
#define PB9 0x19
#define PB10 0x1A
#define PB11 0x1B
#define PB12 0x1C
#define PB13 0x1D
#define PB14 0x1E
#define PB15 0x1F
#define PC0 0x20
#define PC1 0x21
#define PC2 0x22
#define PC3 0x23
#define PC4 0x24
#define PC5 0x25
#define PC6 0x26
#define PC7 0x27
#define PC8 0x28
#define PC9 0x29
#define PC10 0x2A
#define PC11 0x2B
#define PC12 0x2C
#define PC13 0x2D
#define PC14 0x2E
#define PC15 0x2F
#define PD0 0x30
#define PD1 0x31
#define PD2 0x32 // 64 pins (F103R)
#define PD3 0x33
#define PD4 0x34
#define PD5 0x35
#define PD6 0x36
#define PD7 0x37
#define PD8 0x38
#define PD9 0x39
#define PD10 0x3A
#define PD11 0x3B
#define PD12 0x3C
#define PD13 0x3D
#define PD14 0x3E
#define PD15 0x3F
#define PE0 0x40
#define PE1 0x41
#define PE2 0x42
#define PE3 0x43
#define PE4 0x44
#define PE5 0x45
#define PE6 0x46
#define PE7 0x47
#define PE8 0x48
#define PE9 0x49
#define PE10 0x4A
#define PE11 0x4B
#define PE12 0x4C
#define PE13 0x4D
#define PE14 0x4E
#define PE15 0x4F // 100 pins (F446V)
#define PF0 0x50
#define PF1 0x51
#define PF2 0x52
#define PF3 0x53
#define PF4 0x54
#define PF5 0x55
#define PF6 0x56
#define PF7 0x57
#define PF8 0x58
#define PF9 0x59
#define PF10 0x5A
#define PF11 0x5B
#define PF12 0x5C
#define PF13 0x5D
#define PF14 0x5E
#define PF15 0x5F
#define PG0 0x60
#define PG1 0x61
#define PG2 0x62
#define PG3 0x63
#define PG4 0x64
#define PG5 0x65
#define PG6 0x66
#define PG7 0x67
#define PG8 0x68
#define PG9 0x69
#define PG10 0x6A
#define PG11 0x6B
#define PG12 0x6C
#define PG13 0x6D
#define PG14 0x6E
#define PG15 0x6F
#define PH0 0x70
#define PH1 0x71
#define PH2 0x72
#define PH3 0x73
#define PH4 0x74
#define PH5 0x75
#define PH6 0x76
#define PH7 0x77
#define PH8 0x78
#define PH9 0x79
#define PH10 0x7A
#define PH11 0x7B
#define PH12 0x7C
#define PH13 0x7D
#define PH14 0x7E
#define PH15 0x7F // 144 pins (F446Z)
// This must be a literal with the same value as PEND
#define NUM_DIGITAL_PINS 0x80
// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
#define NUM_ANALOG_INPUTS 3
#define NUM_ANALOG_FIRST 128
// PWM resolution
// #define PWM_RESOLUTION 12
#define PWM_FREQUENCY 20000 // >= 20 Khz => inaudible noise for fans
#define PWM_MAX_DUTY_CYCLE 255
// SPI Definitions
// #define PIN_SPI_SS PG15
// #define PIN_SPI_MOSI PB5
// #define PIN_SPI_MISO PB4
// #define PIN_SPI_SCK PB3
// I2C Definitions
#define PIN_WIRE_SDA PB9
#define PIN_WIRE_SCL PB8
#define PIN_I2C_WP PB7
#define EEPROM_DEVICE_ADDRESS 0x50
// Timer Definitions
// Do not use timer used by PWM pin. See PinMap_PWM.
#define TIMER_TONE TIM8
#define TIMER_SERVO TIM5
#define TIMER_SERIAL TIM7
// UART Definitions
//#define SERIAL_UART_INSTANCE 1 // Connected to EXP3 header
/* Enable Serial 3 */
#define HAVE_HWSERIAL1
// #define HAVE_HWSERIAL3
// Default pin used for 'Serial' instance (ex: ST-Link)
// Mandatory for Firmata
#define PIN_SERIAL_RX PA10
#define PIN_SERIAL_TX PA9
/* HAL configuration */
#define HSE_VALUE 8000000U
#define FLASH_PAGE_SIZE (4U * 1024U)
#ifdef __cplusplus
} // extern "C"
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#ifdef __cplusplus
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial
#define SERIAL_PORT_HARDWARE_OPEN Serial
#endif
#endif /* _VARIANT_ARDUINO_STM32_ */