Firmware2/buildroot/tests/mega2560

264 lines
10 KiB
Plaintext
Raw Normal View History

#!/usr/bin/env bash
2018-10-09 06:03:53 +02:00
#
2019-08-19 06:29:59 +02:00
# Build tests for AVR ATmega2560
2018-10-09 06:03:53 +02:00
#
# exit on first failure
set -e
#
# Build with the default configurations
#
2019-09-03 02:49:58 +02:00
#restore_configs
2020-11-22 05:32:56 +01:00
#exec_test $1 $2 "Default Configuration" "$3"
2018-10-09 06:03:53 +02:00
#
# Build with no source filers
#
restore_configs
ci_src_filter -n
exec_test $1 $2 "Default Configuration | no source filtering" "$3"
ci_src_filter -y
#
# Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders
#
2018-10-13 05:11:20 +02:00
use_example_configs AnimationExample
2021-08-08 08:24:15 +02:00
opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO LCD_LANGUAGE fr SAVED_POSITIONS 4 DEFAULT_EJERK 10 \
2021-03-03 07:15:56 +01:00
EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 5 TEMP_SENSOR_3 20 TEMP_SENSOR_4 1000 TEMP_SENSOR_BED 1
2019-09-11 13:09:59 +02:00
opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION \
2021-03-03 07:15:56 +01:00
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \
SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT AUTO_REPORT_SD_STATUS SCROLL_LONG_FILENAMES MEDIA_MENU_AT_TOP \
EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_MENU_MAIN FREEZE_FEATURE CANCEL_OBJECTS SOUND_MENU_ITEM \
2020-03-02 23:51:47 +01:00
MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE EXTRA_LIN_ADVANCE_K QUICK_HOME \
LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \
2019-09-09 11:32:34 +02:00
BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL
exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE ..." "$3"
2018-10-09 06:03:53 +02:00
#
# Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
#
2019-11-10 05:31:22 +01:00
use_example_configs AnimationExample
2021-08-08 08:24:15 +02:00
opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO LCD_LANGUAGE jp_kana DEFAULT_EJERK 10 \
2021-03-03 07:15:56 +01:00
EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 5 TEMP_SENSOR_3 20 TEMP_SENSOR_4 1000 TEMP_SENSOR_BED 1
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \
LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES \
SDSUPPORT LONG_FILENAME_WRITE_SUPPORT SDCARD_SORT_ALPHA NO_SD_AUTOSTART USB_FLASH_DRIVE_SUPPORT CANCEL_OBJECTS \
Z_PROBE_SLED AUTO_BED_LEVELING_UBL UBL_HILBERT_CURVE RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION ENABLE_LEVELING_FADE_HEIGHT \
EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_MENU_MAIN \
2019-11-10 05:31:22 +01:00
MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE QUICK_HOME \
2021-03-03 07:15:56 +01:00
NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL \
SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET BABYSTEP_DISPLAY_TOTAL
opt_disable SEGMENT_LEVELED_MOVES
exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE | Sled Probe | Skew | JP-Kana | Babystep offsets ..." "$3"
2018-10-09 06:03:53 +02:00
#
# 5 runout sensors with distinct states
#
restore_configs
2021-03-03 07:15:56 +01:00
opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO NUM_SERVOS 1 \
EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 \
NUM_RUNOUT_SENSORS 5 FIL_RUNOUT2_PIN 44 FIL_RUNOUT3_PIN 45 FIL_RUNOUT4_PIN 46 FIL_RUNOUT5_PIN 47 \
FIL_RUNOUT3_STATE HIGH
2021-02-01 01:18:39 +01:00
opt_enable VIKI2 BOOT_MARLIN_LOGO_ANIMATED SDSUPPORT AUTO_REPORT_SD_STATUS \
Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE \
EEPROM_SETTINGS EEPROM_CHITCHAT M114_DETAIL AUTO_REPORT_POSITION \
NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET JOYSTICK \
2020-11-18 08:27:21 +01:00
DIRECT_STEPPING DETECT_BROKEN_ENDSTOP \
FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE Z_SAFE_HOMING FIL_RUNOUT3_PULLUP
2020-11-22 05:32:56 +01:00
exec_test $1 $2 "Multiple runout sensors (x5) | Distinct runout states" "$3"
2018-10-09 06:03:53 +02:00
#
2020-05-27 20:45:46 +02:00
# Mixing Extruder with 5 steppers, Greek
#
restore_configs
2021-03-03 07:15:56 +01:00
opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO MIXING_STEPPERS 5 LCD_LANGUAGE ru \
NUM_RUNOUT_SENSORS E_STEPPERS REDUNDANT_PART_COOLING_FAN 1 \
FIL_RUNOUT2_PIN 16 FIL_RUNOUT3_PIN 17 FIL_RUNOUT4_PIN 4 FIL_RUNOUT5_PIN 5
2020-07-24 04:27:40 +02:00
opt_enable MIXING_EXTRUDER GRADIENT_MIX GRADIENT_VTOOL CR10_STOCKDISPLAY \
USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE CONTROLLER_FAN_IGNORE_Z \
FILAMENT_RUNOUT_SENSOR ADVANCED_PAUSE_FEATURE NOZZLE_PARK_FEATURE
2021-08-08 08:24:15 +02:00
opt_disable DISABLE_INACTIVE_EXTRUDER
exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Greek" "$3"
2018-10-09 06:03:53 +02:00
#
# Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
#
#restore_configs
2021-03-03 07:15:56 +01:00
#opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D \
# LCD_FEEDBACK_FREQUENCY_DURATION_MS 10 LCD_FEEDBACK_FREQUENCY_HZ 100
#opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER
2018-10-09 06:03:53 +02:00
#
# Enable COREXY
#
#restore_configs
#opt_enable COREXY
2020-11-22 05:32:56 +01:00
#exec_test $1 $2 "Stuff" "$3"
2018-10-09 06:03:53 +02:00
######## Other Standard LCD/Panels ##############
#
# ULTRA_LCD
#
#restore_configs
#opt_enable ULTRA_LCD
2020-11-22 05:32:56 +01:00
#exec_test $1 $2 "Stuff" "$3"
#
# DOGLCD
#
#restore_configs
#opt_enable DOGLCD
2020-11-22 05:32:56 +01:00
#exec_test $1 $2 "Stuff" "$3"
#
# MAKRPANEL
# Needs to use Melzi and Sanguino hardware
#
#restore_configs
#opt_enable MAKRPANEL
2020-11-22 05:32:56 +01:00
#exec_test $1 $2 "Stuff" "$3"
#
# REPRAP_DISCOUNT_SMART_CONTROLLER, SDSUPPORT, BABYSTEPPING, RIGIDBOARD_V2, and DAC_MOTOR_CURRENT_DEFAULT
#
#restore_configs
#opt_set MOTHERBOARD BOARD_RIGIDBOARD_V2
#opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
2020-11-22 05:32:56 +01:00
#exec_test $1 $2 "Stuff" "$3"
# #
# G3D_PANEL with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
#
#restore_configs
#opt_enable G3D_PANEL SDSUPPORT SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
2021-03-03 07:15:56 +01:00
#opt_set SDSORT_GCODE true SDSORT_USES_RAM true SDSORT_USES_STACK true SDSORT_CACHE_NAMES true
2020-11-22 05:32:56 +01:00
#exec_test $1 $2 "Stuff" "$3"
#
# REPRAPWORLD_KEYPAD
#
# Can't find configuration details to get it to compile
#restore_configs
#opt_enable ULTRA_LCD REPRAPWORLD_KEYPAD REPRAPWORLD_KEYPAD_MOVE_STEP
2020-11-22 05:32:56 +01:00
#exec_test $1 $2 "Stuff" "$3"
#
# RA_CONTROL_PANEL
#
#restore_configs
#opt_enable RA_CONTROL_PANEL PINS_DEBUGGING
2020-11-22 05:32:56 +01:00
#exec_test $1 $2 "Stuff" "$3"
2018-10-09 06:03:53 +02:00
######## I2C LCD/PANELS ##############
#
# !!!ATTENTION!!!
# Most I2C configurations are failing at the moment because they require
# a different Liquid Crystal library "LiquidTWI2".
#
# LCD_SAINSMART_I2C_1602
#
#restore_configs
#opt_enable LCD_SAINSMART_I2C_1602
2020-11-22 05:32:56 +01:00
#exec_test $1 $2 "Stuff" "$3"
#
# LCD_I2C_PANELOLU2
#
#restore_configs
#opt_enable LCD_I2C_PANELOLU2
2020-11-22 05:32:56 +01:00
#exec_test $1 $2 "Stuff" "$3"
#
# LCD_I2C_VIKI
#
#restore_configs
#opt_enable LCD_I2C_VIKI
2020-11-22 05:32:56 +01:00
#exec_test $1 $2 "Stuff" "$3"
#
# LCM1602
#
#restore_configs
#opt_enable LCM1602
2020-11-22 05:32:56 +01:00
#exec_test $1 $2 "Stuff" "$3"
2018-10-09 06:03:53 +02:00
#
# Test Laser features with 12864 LCD
#
restore_configs
opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 0 LCD_LANGUAGE en TEMP_SENSOR_COOLER 1 TEMP_SENSOR_1 0 SERIAL_PORT_2 2 \
2021-05-19 05:52:41 +02:00
DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 400 }' \
DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }' \
MANUAL_FEEDRATE '{ 50*60, 50*60, 4*60 }' \
AXIS_RELATIVE_MODES '{ false, false, false }'
2022-06-01 00:09:44 +02:00
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT MEATPACK_ON_SERIAL_PORT_1 \
LASER_FEATURE LASER_SAFETY_TIMEOUT_MS LASER_COOLANT_FLOW_METER AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN
exec_test $1 $2 "MEGA2560 RAMPS | Laser Feature | Air Evacuation | Air Assist | Cooler | Flowmeter | 12864 LCD | meatpack | Laser Safety Timeout | M3 Power Sync | Trap Power Smoothing | SERIAL_PORT_2 " "$3"
#
# Test Laser features with 44780 LCD
#
restore_configs
opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 0 LCD_LANGUAGE en TEMP_SENSOR_COOLER 1 TEMP_SENSOR_1 0 \
2021-05-19 05:52:41 +02:00
DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 400 }' \
DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }' \
MANUAL_FEEDRATE '{ 50*60, 50*60, 4*60 }' \
AXIS_RELATIVE_MODES '{ false, false, false }'
2022-06-01 00:09:44 +02:00
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT PRINTCOUNTER I2C_AMMETER \
LASER_FEATURE LASER_SAFETY_TIMEOUT_MS LASER_COOLANT_FLOW_METER AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN
exec_test $1 $2 "MEGA2560 RAMPS | Laser Feature | Air Evacuation | Air Assist | Cooler | Laser Safety Timeout | Flowmeter | 44780 LCD " "$3"
#
# Test redundant temperature sensors + MAX TC
#
restore_configs
opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 1 \
TEMP_SENSOR_0 -2 TEMP_SENSOR_REDUNDANT -2 \
TEMP_SENSOR_REDUNDANT_SOURCE E1 TEMP_SENSOR_REDUNDANT_TARGET E0 \
TEMP_0_CS_PIN 11 TEMP_1_CS_PIN 12
opt_enable MPCTEMP
opt_disable PIDTEMP
exec_test $1 $2 "MEGA2560 RAMPS | Redundant temperature sensor | 2x MAX6675" "$3"
#
# Polargraph Config
#
use_example_configs Polargraph
exec_test $1 $2 "RUMBA | POLARGRAPH | RRD LCD" "$3"
#
# Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#
#restore_configs
#opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
2021-09-20 02:26:46 +02:00
#for lang in an bg ca cz da de el el_CY en es eu fi fr gl hr hu it jp_kana nl pl pt pt_br ro ru sk sv tr uk vi zh_CN zh_TW test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; exec_test $1 $2 "Stuff" "$3"; done
#
#restore_configs
#opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
2021-09-20 02:26:46 +02:00
#for lang in an bg ca cz da de el el_CY en es eu fi fr gl hr hu it jp_kana nl pl pt pt_br ro ru sk sv tr uk vi zh_CN zh_TW test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; exec_test $1 $2 "Stuff" "$3"; done
2018-10-09 06:03:53 +02:00
######## Example Configurations ##############
#
# Test a basic DUAL_X_CARRIAGE configuration
#
use_example_configs Formbot/T_Rex_3
2020-11-22 05:32:56 +01:00
exec_test $1 $2 "Formbot/T_Rex_3 example configuration." "$3"
2019-07-11 09:32:24 +02:00
#
# BQ Hephestos 2
#restore_configs
2020-12-17 13:18:07 +01:00
#use_example_configs BQ/Hephestos_2
2020-11-22 05:32:56 +01:00
#exec_test $1 $2 "Stuff" "$3"
2019-07-11 09:32:24 +02:00
#
# Makibox Config need to check board type for Teensy++ 2.0
#
#use_example_configs makibox
2020-11-22 05:32:56 +01:00
#exec_test $1 $2 "Stuff" "$3"
2019-07-11 09:32:24 +02:00
#
# tvrrug Config need to check board type for sanguino atmega644p
#
#use_example_configs tvrrug/Round2
2020-11-22 05:32:56 +01:00
#exec_test $1 $2 "Stuff" "$3"
2018-10-02 01:53:09 +02:00
# clean up
restore_configs