Firmware2/Marlin/src/inc/Conditionals_LCD.h

949 lines
26 KiB
C
Raw Normal View History

/**
* Marlin 3D Printer Firmware
2020-02-03 15:00:57 +01:00
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
2019-06-28 06:57:50 +02:00
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
2020-07-23 05:20:14 +02:00
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
2018-11-03 08:13:10 +01:00
#pragma once
/**
* Conditionals_LCD.h
* Conditionals that need to be set before Configuration_adv.h or pins.h
*/
2020-09-07 04:40:58 +02:00
// Kinematics
#if ENABLED(MORGAN_SCARA)
#define IS_SCARA 1
#define IS_KINEMATIC 1
#elif ENABLED(DELTA)
#define IS_KINEMATIC 1
#else
#define IS_CARTESIAN 1
#endif
2020-09-07 04:40:58 +02:00
// MKS_LCD12864 is a variant of MKS_MINI_12864
#if ENABLED(MKS_LCD12864)
#define MKS_MINI_12864
#endif
2020-09-07 04:40:58 +02:00
/**
* General Flags that may be set below by specific LCDs
*
* DOGLCD : Run a Graphical LCD through U8GLib (with MarlinUI)
* IS_ULTIPANEL : Define LCD_PINS_D5/6/7 for direct-connected "Ultipanel" LCDs
* IS_ULTRA_LCD : Ultra LCD, not necessarily Ultipanel. Used most often with NEWPANEL.
* IS_RRD_SC : Common RRD Smart Controller digital interface pins
* IS_RRD_FG_SC : Common RRD Full Graphical Smart Controller digital interface pins
* U8GLIB_ST7920 : Most common DOGM display SPI interface, supporting a "lightweight" display mode.
* U8GLIB_SH1106 : SH1106 OLED with I2C interface via U8GLib
* IS_U8GLIB_SSD1306 : SSD1306 OLED with I2C interface via U8GLib
* U8GLIB_SSD1309 : SSD1309 OLED with I2C interface via U8GLib
* U8GLIB_ST7565_64128N : ST7565 128x64 LCD with SPI interface via U8GLib
* U8GLIB_LM6059_AF : LM6059 with Hardware SPI via U8GLib
*/
#if EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
#define MINIPANEL
#elif ENABLED(CARTESIO_UI)
2017-06-24 20:56:07 +02:00
#define DOGLCD
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
2020-09-07 04:40:58 +02:00
#elif EITHER(DWIN_MARLINUI_PORTRAIT, DWIN_MARLINUI_LANDSCAPE)
#define IS_DWIN_MARLINUI 1
#define IS_ULTIPANEL
#elif ENABLED(ZONESTAR_LCD)
2017-06-10 07:12:18 +02:00
#define ADC_KEYPAD
2019-07-14 16:19:29 +02:00
#define IS_RRW_KEYPAD
#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
#define ADC_KEY_NUM 8
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
2017-06-10 07:12:18 +02:00
// This helps to implement ADC_KEYPAD menus
#define REVERSE_MENU_DIRECTION
#define ENCODER_PULSES_PER_STEP 1
#define ENCODER_STEPS_PER_MENU_ITEM 1
2017-11-05 03:22:53 +01:00
#define ENCODER_FEEDRATE_DEADZONE 2
2017-06-24 20:56:07 +02:00
#elif ENABLED(ZONESTAR_12864LCD)
#define DOGLCD
#define IS_RRD_SC
#define U8GLIB_ST7920
#elif ENABLED(ZONESTAR_12864OLED)
#define IS_RRD_SC
#define U8GLIB_SH1106
#elif ENABLED(ZONESTAR_12864OLED_SSD1306)
#define IS_RRD_SC
#define IS_U8GLIB_SSD1306
2018-01-05 17:10:55 +01:00
#elif ENABLED(RADDS_DISPLAY)
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
#define ENCODER_PULSES_PER_STEP 2
2019-07-14 16:19:29 +02:00
#elif EITHER(ANET_FULL_GRAPHICS_LCD, BQ_LCD_SMART_CONTROLLER)
2017-06-24 20:56:07 +02:00
2019-07-14 16:19:29 +02:00
#define IS_RRD_FG_SC
#elif ANY(miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864)
2017-06-24 20:56:07 +02:00
2019-03-11 11:07:14 +01:00
#define DOGLCD
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
2017-06-24 20:56:07 +02:00
#if ENABLED(miniVIKI)
#define U8GLIB_ST7565_64128N
#elif ENABLED(VIKI2)
#define U8GLIB_ST7565_64128N
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define U8GLIB_LM6059_AF
#elif ENABLED(AZSMZ_12864)
#define U8GLIB_ST7565_64128N
#endif
2017-06-24 20:56:07 +02:00
#elif ENABLED(OLED_PANEL_TINYBOY2)
2017-06-24 20:56:07 +02:00
2019-07-14 16:19:29 +02:00
#define IS_U8GLIB_SSD1306
#define IS_ULTIPANEL
2017-06-24 20:56:07 +02:00
#elif ENABLED(RA_CONTROL_PANEL)
2017-10-09 22:58:02 +02:00
#define LCD_I2C_TYPE_PCA8574
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
2017-10-09 22:58:02 +02:00
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
2017-10-09 22:58:02 +02:00
#define DOGLCD
#define U8GLIB_ST7920
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
2017-10-09 22:58:02 +02:00
#elif ENABLED(CR10_STOCKDISPLAY)
2017-10-09 22:58:02 +02:00
2019-07-14 16:19:29 +02:00
#define IS_RRD_FG_SC
#define BOARD_ST7920_DELAY_1 DELAY_NS(125)
#define BOARD_ST7920_DELAY_2 DELAY_NS(125)
#define BOARD_ST7920_DELAY_3 DELAY_NS(125)
#elif ENABLED(MKS_12864OLED)
2017-10-09 22:58:02 +02:00
2019-07-14 16:19:29 +02:00
#define IS_RRD_SC
#define U8GLIB_SH1106
2017-10-09 22:58:02 +02:00
#elif ENABLED(MKS_12864OLED_SSD1306)
2019-07-14 16:19:29 +02:00
#define IS_RRD_SC
#define IS_U8GLIB_SSD1306
#elif ENABLED(FYSETC_242_OLED_12864)
2020-07-07 08:57:05 +02:00
#define IS_RRD_SC
#define U8GLIB_SH1106
2020-07-07 08:57:05 +02:00
#define LED_CONTROL_MENU
#define NEOPIXEL_LED
#undef NEOPIXEL_TYPE
#define NEOPIXEL_TYPE NEO_RGB
#if NEOPIXEL_PIXELS < 3
#undef NEOPIXELS_PIXELS
#define NEOPIXEL_PIXELS 3
#endif
#ifndef NEOPIXEL_BRIGHTNESS
#define NEOPIXEL_BRIGHTNESS 127
#endif
2020-07-07 08:57:05 +02:00
#if ENABLED(PSU_CONTROL)
#define LED_BACKLIGHT_TIMEOUT 10000
#endif
2020-01-17 20:16:05 +01:00
#elif ANY(FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1, FYSETC_GENERIC_12864_1_1)
#define FYSETC_MINI_12864
#define DOGLCD
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
#define LED_COLORS_REDUCE_GREEN
2019-10-22 22:43:37 +02:00
#if ENABLED(PSU_CONTROL) && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1)
2019-06-13 04:59:39 +02:00
#define LED_BACKLIGHT_TIMEOUT 10000
#endif
// Require LED backlighting enabled
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#define RGB_LED
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define LED_CONTROL_MENU
#define NEOPIXEL_LED
#undef NEOPIXEL_TYPE
#define NEOPIXEL_TYPE NEO_RGB
#if NEOPIXEL_PIXELS < 3
#undef NEOPIXELS_PIXELS
#define NEOPIXEL_PIXELS 3
#endif
#ifndef NEOPIXEL_BRIGHTNESS
#define NEOPIXEL_BRIGHTNESS 127
#endif
//#define NEOPIXEL_STARTUP_TEST
#endif
2019-07-14 16:19:29 +02:00
#elif ENABLED(ULTI_CONTROLLER)
#define IS_ULTIPANEL
2019-07-14 16:19:29 +02:00
#define U8GLIB_SSD1309
#define LCD_RESET_PIN LCD_PINS_D6 // This controller need a reset pin
#define ENCODER_PULSES_PER_STEP 2
#define ENCODER_STEPS_PER_MENU_ITEM 2
#elif ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602)
#define IS_RRD_SC
#define LCD_WIDTH 16
#define LCD_HEIGHT 2
#elif EITHER(TFTGLCD_PANEL_SPI, TFTGLCD_PANEL_I2C)
#define IS_TFTGLCD_PANEL 1
#define IS_ULTIPANEL // Note that IS_ULTIPANEL leads to HAS_WIRED_LCD
#if ENABLED(SDSUPPORT) && DISABLED(LCD_PROGRESS_BAR)
#define LCD_PROGRESS_BAR
#endif
#if ENABLED(TFTGLCD_PANEL_I2C)
#define LCD_I2C_ADDRESS 0x27 // Must be equal to panel's I2C slave addres
#endif
#define LCD_USE_I2C_BUZZER // Enable buzzer on LCD, used for both I2C and SPI buses (LiquidTWI2 not required)
#define STD_ENCODER_PULSES_PER_STEP 2
#define STD_ENCODER_STEPS_PER_MENU_ITEM 1
#define LCD_WIDTH 20 // 20 or 24 chars in line
#define LCD_HEIGHT 10 // Character lines
#define LCD_CONTRAST_MIN 127
#define LCD_CONTRAST_MAX 255
#define DEFAULT_LCD_CONTRAST 250
#define CONVERT_TO_EXT_ASCII // Use extended 128-255 symbols from ASCII table.
// At this time present conversion only for cyrillic - bg, ru and uk languages.
// First 7 ASCII symbols in panel font must be replaced with Marlin's special symbols.
2019-07-14 16:19:29 +02:00
#endif
#if ENABLED(IS_RRD_FG_SC)
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#endif
#if EITHER(MAKRPANEL, MINIPANEL)
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
#define DOGLCD
2019-07-14 16:19:29 +02:00
#if ENABLED(MAKRPANEL)
#define U8GLIB_ST7565_64128N
#endif
#endif
2019-07-14 16:19:29 +02:00
#if ENABLED(IS_U8GLIB_SSD1306)
#define U8GLIB_SSD1306
#endif
#if ENABLED(OVERLORD_OLED)
#define IS_ULTIPANEL
#define U8GLIB_SH1106
/**
* PCA9632 for buzzer and LEDs via i2c
* No auto-inc, red and green leds switched, buzzer
*/
#define PCA9632
#define PCA9632_NO_AUTO_INC
#define PCA9632_GRN 0x00
#define PCA9632_RED 0x02
#define PCA9632_BUZZER
#define PCA9632_BUZZER_DATA { 0x09, 0x02 }
#define ENCODER_PULSES_PER_STEP 1 // Overlord uses buttons
#define ENCODER_STEPS_PER_MENU_ITEM 1
#endif
// 128x64 I2C OLED LCDs - SSD1306/SSD1309/SH1106
#if ANY(U8GLIB_SSD1306, U8GLIB_SSD1309, U8GLIB_SH1106)
2020-09-07 04:40:58 +02:00
#define HAS_U8GLIB_I2C_OLED 1
#endif
2020-09-07 04:40:58 +02:00
#if HAS_U8GLIB_I2C_OLED
2019-07-14 16:19:29 +02:00
#define IS_ULTRA_LCD
#define DOGLCD
#endif
// ST7920-based graphical displays
#if ANY(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, LCD_FOR_MELZI, SILVER_GATE_GLCD_CONTROLLER)
#define DOGLCD
#define U8GLIB_ST7920
2019-07-14 16:19:29 +02:00
#define IS_RRD_SC
#endif
2017-06-24 20:56:07 +02:00
// RepRapDiscount LCD or Graphical LCD with rotary click encoder
2019-07-14 16:19:29 +02:00
#if ENABLED(IS_RRD_SC)
#define REPRAP_DISCOUNT_SMART_CONTROLLER
#endif
2017-06-24 20:56:07 +02:00
/**
* SPI Ultipanels
*/
// Basic Ultipanel-like displays
#if ANY(ULTIMAKERCONTROLLER, REPRAP_DISCOUNT_SMART_CONTROLLER, G3D_PANEL, RIGIDBOT_PANEL, PANEL_ONE, U8GLIB_SH1106)
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
#endif
// Einstart OLED has Cardinal nav via pins defined in pins_EINSTART-S.h
#if ENABLED(U8GLIB_SH1106_EINSTART)
#define DOGLCD
#define IS_ULTIPANEL
#endif
TFT Refactoring (#19192) * split tft folder in two: tft for color ui; tft_io for shared tft code * after the files got moved, now the code was moved to the right place * classic ui using TFT IO init lcd codes * feature to compile tft_io when enabled * compiling fix * lvgl spi tft working with tft io init codes * there is no need for separeted fsmc and spi class in lvgl anymore, as tft io handle everything * remove debug * base for TFT rotation and mirroring API, and ILI9488 support * ST7796S rotate and mirror support * ST7789V rotate and mirror support * ST7735 rotate and mirror support * ILI9341 rotate and mirror support * ILI9328 rotate and mirror support * R61505 rotate and mirror support * MKS TFT definitions * more configs for mks tfts * update config * naming typo * to configure the user interface * ANYCUBIC_TFT35 * tft configs * support for SSD1963 * tft display types * updated conditionals lcd; first board fully working with the new code - all 3 ui! * compatiblity * changed name * move classic ui file name * rename TURN -> ROTATE * GRAPHICAL_TFT_ROTATE_180 deprecated * first fsmc board fully working - chitu v5 * mks robin nano v1.2 + tft 35 ok! * right pin name * anycubic tft tested in a TRIGORILLA_PRO * chitu v6 * nano 32 tft orientation * mks tft43 * mks tft43 rotation * fixed LONGER LK tft setup * GRAPHICAL_TFT_UPSCALE defined by the display type * better offsets defaults * Update Configuration.h * Update tft_fsmc.cpp * Update Conditionals_LCD.h * Tweak comments * update nano tests * Revert "update nano tests" This reverts commit a071ebbfad30e28855a4a5695ec8a726542a1a65. * default tft * outdated comments * to not break non-vscode builds * upscale tft 35 * support tft 180 rotation for color ui * Each TFT Driver is responsible for its default color mode. * use auto detect in mks displays, because some of them could be shipped with diferent drivers * extra s * unused code * wrong -1 * missing mirror options * Smaller regex pattern * Comment updates * Clean up old defines * Apply pins formatting * GRAPHICAL_TFT_ROTATE_180 => TFT_ROTATE_180 * MKS_ROBIN_TFT_V1_1R * merge fix * correct resolution * auto is default, dont need be there, and it will allow the user to configure it even for named displays * to not use rotation with MKS_ROBIN_TFT_V1_1R * i like () in macros * avoid sleepy commits * default for st7789 is rgb * nano follow up * to allow ili9328 rotation * default is rgb * boards merge follow up * to match bootloader orientation * HAS_TOUCH_XPT2046 is not hal specific anymore * lets not forget LPC * 180 rotation for ili9328 and R61505 * Clean up whitespace Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-10-12 23:38:07 +02:00
// Compatibility
#if ENABLED(FSMC_GRAPHICAL_TFT)
#define TFT_CLASSIC_UI
#define TFT_INTERFACE_FSMC
#define TFT_GENERIC
#elif ENABLED(SPI_GRAPHICAL_TFT)
#define TFT_CLASSIC_UI
#define TFT_INTERFACE_SPI
#define TFT_GENERIC
#elif EITHER(TFT_320x240, TFT_480x320)
#define TFT_COLOR_UI
#define TFT_INTERFACE_FSMC
#define TFT_GENERIC
#elif EITHER(TFT_320x240_SPI, TFT_480x320_SPI)
#define TFT_COLOR_UI
#define TFT_INTERFACE_SPI
#define TFT_GENERIC
#elif ENABLED(TFT_LVGL_UI_FSMC)
#define TFT_LVGL_UI
#define TFT_INTERFACE_FSMC
#define TFT_GENERIC
#elif ENABLED(TFT_LVGL_UI_SPI)
#define TFT_LVGL_UI
#define TFT_INTERFACE_SPI
#define TFT_GENERIC
#endif
// FSMC/SPI TFT Panels (LVGL)
TFT Refactoring (#19192) * split tft folder in two: tft for color ui; tft_io for shared tft code * after the files got moved, now the code was moved to the right place * classic ui using TFT IO init lcd codes * feature to compile tft_io when enabled * compiling fix * lvgl spi tft working with tft io init codes * there is no need for separeted fsmc and spi class in lvgl anymore, as tft io handle everything * remove debug * base for TFT rotation and mirroring API, and ILI9488 support * ST7796S rotate and mirror support * ST7789V rotate and mirror support * ST7735 rotate and mirror support * ILI9341 rotate and mirror support * ILI9328 rotate and mirror support * R61505 rotate and mirror support * MKS TFT definitions * more configs for mks tfts * update config * naming typo * to configure the user interface * ANYCUBIC_TFT35 * tft configs * support for SSD1963 * tft display types * updated conditionals lcd; first board fully working with the new code - all 3 ui! * compatiblity * changed name * move classic ui file name * rename TURN -> ROTATE * GRAPHICAL_TFT_ROTATE_180 deprecated * first fsmc board fully working - chitu v5 * mks robin nano v1.2 + tft 35 ok! * right pin name * anycubic tft tested in a TRIGORILLA_PRO * chitu v6 * nano 32 tft orientation * mks tft43 * mks tft43 rotation * fixed LONGER LK tft setup * GRAPHICAL_TFT_UPSCALE defined by the display type * better offsets defaults * Update Configuration.h * Update tft_fsmc.cpp * Update Conditionals_LCD.h * Tweak comments * update nano tests * Revert "update nano tests" This reverts commit a071ebbfad30e28855a4a5695ec8a726542a1a65. * default tft * outdated comments * to not break non-vscode builds * upscale tft 35 * support tft 180 rotation for color ui * Each TFT Driver is responsible for its default color mode. * use auto detect in mks displays, because some of them could be shipped with diferent drivers * extra s * unused code * wrong -1 * missing mirror options * Smaller regex pattern * Comment updates * Clean up old defines * Apply pins formatting * GRAPHICAL_TFT_ROTATE_180 => TFT_ROTATE_180 * MKS_ROBIN_TFT_V1_1R * merge fix * correct resolution * auto is default, dont need be there, and it will allow the user to configure it even for named displays * to not use rotation with MKS_ROBIN_TFT_V1_1R * i like () in macros * avoid sleepy commits * default for st7789 is rgb * nano follow up * to allow ili9328 rotation * default is rgb * boards merge follow up * to match bootloader orientation * HAS_TOUCH_XPT2046 is not hal specific anymore * lets not forget LPC * 180 rotation for ili9328 and R61505 * Clean up whitespace Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-10-12 23:38:07 +02:00
#if ENABLED(TFT_LVGL_UI)
#define HAS_TFT_LVGL_UI 1
#endif
// FSMC/SPI TFT Panels
TFT Refactoring (#19192) * split tft folder in two: tft for color ui; tft_io for shared tft code * after the files got moved, now the code was moved to the right place * classic ui using TFT IO init lcd codes * feature to compile tft_io when enabled * compiling fix * lvgl spi tft working with tft io init codes * there is no need for separeted fsmc and spi class in lvgl anymore, as tft io handle everything * remove debug * base for TFT rotation and mirroring API, and ILI9488 support * ST7796S rotate and mirror support * ST7789V rotate and mirror support * ST7735 rotate and mirror support * ILI9341 rotate and mirror support * ILI9328 rotate and mirror support * R61505 rotate and mirror support * MKS TFT definitions * more configs for mks tfts * update config * naming typo * to configure the user interface * ANYCUBIC_TFT35 * tft configs * support for SSD1963 * tft display types * updated conditionals lcd; first board fully working with the new code - all 3 ui! * compatiblity * changed name * move classic ui file name * rename TURN -> ROTATE * GRAPHICAL_TFT_ROTATE_180 deprecated * first fsmc board fully working - chitu v5 * mks robin nano v1.2 + tft 35 ok! * right pin name * anycubic tft tested in a TRIGORILLA_PRO * chitu v6 * nano 32 tft orientation * mks tft43 * mks tft43 rotation * fixed LONGER LK tft setup * GRAPHICAL_TFT_UPSCALE defined by the display type * better offsets defaults * Update Configuration.h * Update tft_fsmc.cpp * Update Conditionals_LCD.h * Tweak comments * update nano tests * Revert "update nano tests" This reverts commit a071ebbfad30e28855a4a5695ec8a726542a1a65. * default tft * outdated comments * to not break non-vscode builds * upscale tft 35 * support tft 180 rotation for color ui * Each TFT Driver is responsible for its default color mode. * use auto detect in mks displays, because some of them could be shipped with diferent drivers * extra s * unused code * wrong -1 * missing mirror options * Smaller regex pattern * Comment updates * Clean up old defines * Apply pins formatting * GRAPHICAL_TFT_ROTATE_180 => TFT_ROTATE_180 * MKS_ROBIN_TFT_V1_1R * merge fix * correct resolution * auto is default, dont need be there, and it will allow the user to configure it even for named displays * to not use rotation with MKS_ROBIN_TFT_V1_1R * i like () in macros * avoid sleepy commits * default for st7789 is rgb * nano follow up * to allow ili9328 rotation * default is rgb * boards merge follow up * to match bootloader orientation * HAS_TOUCH_XPT2046 is not hal specific anymore * lets not forget LPC * 180 rotation for ili9328 and R61505 * Clean up whitespace Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-10-12 23:38:07 +02:00
#if ENABLED(TFT_CLASSIC_UI)
#define TFT_SCALED_DOGLCD 1
#endif
#if TFT_SCALED_DOGLCD
#define DOGLCD
#define IS_ULTIPANEL
#define DELAYED_BACKLIGHT_INIT
TFT Refactoring (#19192) * split tft folder in two: tft for color ui; tft_io for shared tft code * after the files got moved, now the code was moved to the right place * classic ui using TFT IO init lcd codes * feature to compile tft_io when enabled * compiling fix * lvgl spi tft working with tft io init codes * there is no need for separeted fsmc and spi class in lvgl anymore, as tft io handle everything * remove debug * base for TFT rotation and mirroring API, and ILI9488 support * ST7796S rotate and mirror support * ST7789V rotate and mirror support * ST7735 rotate and mirror support * ILI9341 rotate and mirror support * ILI9328 rotate and mirror support * R61505 rotate and mirror support * MKS TFT definitions * more configs for mks tfts * update config * naming typo * to configure the user interface * ANYCUBIC_TFT35 * tft configs * support for SSD1963 * tft display types * updated conditionals lcd; first board fully working with the new code - all 3 ui! * compatiblity * changed name * move classic ui file name * rename TURN -> ROTATE * GRAPHICAL_TFT_ROTATE_180 deprecated * first fsmc board fully working - chitu v5 * mks robin nano v1.2 + tft 35 ok! * right pin name * anycubic tft tested in a TRIGORILLA_PRO * chitu v6 * nano 32 tft orientation * mks tft43 * mks tft43 rotation * fixed LONGER LK tft setup * GRAPHICAL_TFT_UPSCALE defined by the display type * better offsets defaults * Update Configuration.h * Update tft_fsmc.cpp * Update Conditionals_LCD.h * Tweak comments * update nano tests * Revert "update nano tests" This reverts commit a071ebbfad30e28855a4a5695ec8a726542a1a65. * default tft * outdated comments * to not break non-vscode builds * upscale tft 35 * support tft 180 rotation for color ui * Each TFT Driver is responsible for its default color mode. * use auto detect in mks displays, because some of them could be shipped with diferent drivers * extra s * unused code * wrong -1 * missing mirror options * Smaller regex pattern * Comment updates * Clean up old defines * Apply pins formatting * GRAPHICAL_TFT_ROTATE_180 => TFT_ROTATE_180 * MKS_ROBIN_TFT_V1_1R * merge fix * correct resolution * auto is default, dont need be there, and it will allow the user to configure it even for named displays * to not use rotation with MKS_ROBIN_TFT_V1_1R * i like () in macros * avoid sleepy commits * default for st7789 is rgb * nano follow up * to allow ili9328 rotation * default is rgb * boards merge follow up * to match bootloader orientation * HAS_TOUCH_XPT2046 is not hal specific anymore * lets not forget LPC * 180 rotation for ili9328 and R61505 * Clean up whitespace Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-10-12 23:38:07 +02:00
#elif ENABLED(TFT_LVGL_UI)
#define DELAYED_BACKLIGHT_INIT
#endif
// Color UI
TFT Refactoring (#19192) * split tft folder in two: tft for color ui; tft_io for shared tft code * after the files got moved, now the code was moved to the right place * classic ui using TFT IO init lcd codes * feature to compile tft_io when enabled * compiling fix * lvgl spi tft working with tft io init codes * there is no need for separeted fsmc and spi class in lvgl anymore, as tft io handle everything * remove debug * base for TFT rotation and mirroring API, and ILI9488 support * ST7796S rotate and mirror support * ST7789V rotate and mirror support * ST7735 rotate and mirror support * ILI9341 rotate and mirror support * ILI9328 rotate and mirror support * R61505 rotate and mirror support * MKS TFT definitions * more configs for mks tfts * update config * naming typo * to configure the user interface * ANYCUBIC_TFT35 * tft configs * support for SSD1963 * tft display types * updated conditionals lcd; first board fully working with the new code - all 3 ui! * compatiblity * changed name * move classic ui file name * rename TURN -> ROTATE * GRAPHICAL_TFT_ROTATE_180 deprecated * first fsmc board fully working - chitu v5 * mks robin nano v1.2 + tft 35 ok! * right pin name * anycubic tft tested in a TRIGORILLA_PRO * chitu v6 * nano 32 tft orientation * mks tft43 * mks tft43 rotation * fixed LONGER LK tft setup * GRAPHICAL_TFT_UPSCALE defined by the display type * better offsets defaults * Update Configuration.h * Update tft_fsmc.cpp * Update Conditionals_LCD.h * Tweak comments * update nano tests * Revert "update nano tests" This reverts commit a071ebbfad30e28855a4a5695ec8a726542a1a65. * default tft * outdated comments * to not break non-vscode builds * upscale tft 35 * support tft 180 rotation for color ui * Each TFT Driver is responsible for its default color mode. * use auto detect in mks displays, because some of them could be shipped with diferent drivers * extra s * unused code * wrong -1 * missing mirror options * Smaller regex pattern * Comment updates * Clean up old defines * Apply pins formatting * GRAPHICAL_TFT_ROTATE_180 => TFT_ROTATE_180 * MKS_ROBIN_TFT_V1_1R * merge fix * correct resolution * auto is default, dont need be there, and it will allow the user to configure it even for named displays * to not use rotation with MKS_ROBIN_TFT_V1_1R * i like () in macros * avoid sleepy commits * default for st7789 is rgb * nano follow up * to allow ili9328 rotation * default is rgb * boards merge follow up * to match bootloader orientation * HAS_TOUCH_XPT2046 is not hal specific anymore * lets not forget LPC * 180 rotation for ili9328 and R61505 * Clean up whitespace Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-10-12 23:38:07 +02:00
#if ENABLED(TFT_COLOR_UI)
#define HAS_GRAPHICAL_TFT 1
#define IS_ULTIPANEL
#endif
/**
* I2C Panels
*/
2017-06-24 20:56:07 +02:00
#if EITHER(LCD_SAINSMART_I2C_1602, LCD_SAINSMART_I2C_2004)
#define LCD_I2C_TYPE_PCF8575
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
#if ENABLED(LCD_SAINSMART_I2C_2004)
#define LCD_WIDTH 20
#define LCD_HEIGHT 4
#endif
#elif ENABLED(LCD_I2C_PANELOLU2)
// PANELOLU2 LCD with status LEDs, separate encoder and click inputs
#define LCD_I2C_TYPE_MCP23017
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (optional)
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
#elif ENABLED(LCD_I2C_VIKI)
/**
* Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
*
* This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
* Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
* Note: The pause/stop/resume LCD button pin should be connected to the Arduino
* BTN_ENC pin (or set BTN_ENC to -1 if not used)
*/
#define LCD_I2C_TYPE_MCP23017
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
#define ENCODER_FEEDRATE_DEADZONE 4
#define STD_ENCODER_PULSES_PER_STEP 1
#define STD_ENCODER_STEPS_PER_MENU_ITEM 2
#elif ENABLED(G3D_PANEL)
#define STD_ENCODER_PULSES_PER_STEP 2
#define STD_ENCODER_STEPS_PER_MENU_ITEM 1
2019-07-14 16:19:29 +02:00
#elif ANY(REPRAP_DISCOUNT_SMART_CONTROLLER, miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864, OLED_PANEL_TINYBOY2, BQ_LCD_SMART_CONTROLLER, LCD_I2C_PANELOLU2)
#define STD_ENCODER_PULSES_PER_STEP 4
#define STD_ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#ifndef STD_ENCODER_PULSES_PER_STEP
#if ENABLED(TOUCH_SCREEN)
#define STD_ENCODER_PULSES_PER_STEP 2
#else
#define STD_ENCODER_PULSES_PER_STEP 5
#endif
#endif
#ifndef STD_ENCODER_STEPS_PER_MENU_ITEM
#define STD_ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#ifndef ENCODER_PULSES_PER_STEP
#define ENCODER_PULSES_PER_STEP STD_ENCODER_PULSES_PER_STEP
#endif
#ifndef ENCODER_STEPS_PER_MENU_ITEM
#define ENCODER_STEPS_PER_MENU_ITEM STD_ENCODER_STEPS_PER_MENU_ITEM
#endif
#ifndef ENCODER_FEEDRATE_DEADZONE
#define ENCODER_FEEDRATE_DEADZONE 6
#endif
// Shift register panels
// ---------------------
// 2 wire Non-latching LCD SR from:
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
#if ENABLED(FF_INTERFACEBOARD)
#define SR_LCD_3W_NL // Non latching 3 wire shift register
2019-07-14 16:19:29 +02:00
#define IS_ULTIPANEL
#elif ENABLED(SAV_3DLCD)
#define SR_LCD_2W_NL // Non latching 2 wire shift register
#define IS_ULTIPANEL
#endif
2019-07-14 16:19:29 +02:00
#if ENABLED(IS_ULTIPANEL)
#define ULTIPANEL
#endif
#if ENABLED(ULTIPANEL)
2019-07-14 16:19:29 +02:00
#define IS_ULTRA_LCD
2020-05-03 06:26:12 +02:00
#define NEWPANEL
2019-07-14 16:19:29 +02:00
#endif
#if ENABLED(IS_ULTRA_LCD)
#define ULTRA_LCD
#endif
2019-07-14 16:19:29 +02:00
#if ENABLED(IS_RRW_KEYPAD)
#define REPRAPWORLD_KEYPAD
#endif
// Keypad needs a move step
#if ENABLED(REPRAPWORLD_KEYPAD)
#define NEWPANEL
#ifndef REPRAPWORLD_KEYPAD_MOVE_STEP
#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
#endif
#endif
2020-03-11 09:40:30 +01:00
// Aliases for LCD features
#if ANY(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define HAS_DGUS_LCD 1
#endif
// Extensible UI serial touch screens. (See src/lcd/extui)
#if ANY(HAS_DGUS_LCD, MALYAN_LCD, TOUCH_UI_FTDI_EVE, ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON)
2019-07-14 16:19:29 +02:00
#define IS_EXTUI
2019-05-08 03:32:50 +02:00
#define EXTENSIBLE_UI
#endif
2018-10-23 23:00:34 +02:00
// Aliases for LCD features
#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
#define HAS_DISPLAY 1
#endif
#if ENABLED(ULTRA_LCD)
2020-09-28 08:13:27 +02:00
#define HAS_WIRED_LCD 1
#if ENABLED(DOGLCD)
2020-09-28 08:13:27 +02:00
#define HAS_MARLINUI_U8GLIB 1
#elif IS_TFTGLCD_PANEL
// Neither DOGM nor HD44780. Fully customized interface.
#elif DISABLED(HAS_GRAPHICAL_TFT)
2020-09-28 08:13:27 +02:00
#define HAS_MARLINUI_HD44780 1
#endif
#endif
#if ENABLED(ULTIPANEL) && DISABLED(NO_LCD_MENUS)
#define HAS_LCD_MENU 1
#endif
#if ENABLED(ADC_KEYPAD)
#define HAS_ADC_BUTTONS 1
#endif
2018-11-21 04:39:30 +01:00
2020-09-28 08:13:27 +02:00
#if HAS_MARLINUI_U8GLIB
2020-02-23 04:36:12 +01:00
#ifndef LCD_PIXEL_WIDTH
#define LCD_PIXEL_WIDTH 128
#endif
#ifndef LCD_PIXEL_HEIGHT
#define LCD_PIXEL_HEIGHT 64
#endif
#endif
/**
* Extruders have some combination of stepper motors and hotends
* so we separate these concepts into the defines:
*
* EXTRUDERS - Number of Selectable Tools
* HOTENDS - Number of hotends, whether connected or separate
* E_STEPPERS - Number of actual E stepper motors
* E_MANUAL - Number of E steppers for LCD move options
*/
2019-02-01 02:10:52 +01:00
#if EXTRUDERS == 0
2020-04-27 11:41:18 +02:00
#undef EXTRUDERS
#define EXTRUDERS 0
#undef SINGLENOZZLE
#undef SWITCHING_EXTRUDER
#undef SWITCHING_NOZZLE
#undef MIXING_EXTRUDER
#undef MK2_MULTIPLEXER
#undef PRUSA_MMU2
2020-05-18 07:50:35 +02:00
#undef HOTEND_IDLE_TIMEOUT
2020-09-21 01:29:08 +02:00
#elif EXTRUDERS > 1
#define HAS_MULTI_EXTRUDER 1
#endif
2019-02-01 02:10:52 +01:00
#if ENABLED(SWITCHING_EXTRUDER) // One stepper for every two EXTRUDERS
#if EXTRUDERS > 4
#define E_STEPPERS 3
#elif EXTRUDERS > 2
#define E_STEPPERS 2
2017-09-06 13:28:32 +02:00
#else
#define E_STEPPERS 1
2017-09-06 13:28:32 +02:00
#endif
#if DISABLED(SWITCHING_NOZZLE)
#define HOTENDS E_STEPPERS
#endif
#elif ENABLED(MIXING_EXTRUDER)
#define E_STEPPERS MIXING_STEPPERS
#define E_MANUAL 1
2020-04-22 23:35:03 +02:00
#if MIXING_STEPPERS == 2
#define HAS_DUAL_MIXING 1
#endif
2018-09-08 08:43:24 +02:00
#elif ENABLED(SWITCHING_TOOLHEAD)
#define E_STEPPERS EXTRUDERS
#define E_MANUAL EXTRUDERS
2019-02-01 02:10:52 +01:00
#elif ENABLED(PRUSA_MMU2)
#define E_STEPPERS 1
#endif
2017-09-06 13:28:32 +02:00
// No inactive extruders with MK2_MULTIPLEXER or SWITCHING_NOZZLE
#if EITHER(MK2_MULTIPLEXER, SWITCHING_NOZZLE)
#undef DISABLE_INACTIVE_EXTRUDER
#endif
2020-08-26 09:15:43 +02:00
// Průša MK2 Multiplexer and MMU 2.0 force SINGLENOZZLE
#if EITHER(MK2_MULTIPLEXER, PRUSA_MMU2)
#define SINGLENOZZLE
#endif
#if EITHER(SINGLENOZZLE, MIXING_EXTRUDER) // One hotend, one thermistor, no XY offset
2018-05-28 00:56:21 +02:00
#undef HOTENDS
#define HOTENDS 1
#undef HOTEND_OFFSET_X
#undef HOTEND_OFFSET_Y
#endif
#ifndef HOTENDS
#define HOTENDS EXTRUDERS
#endif
2018-09-08 08:43:24 +02:00
#ifndef E_STEPPERS
#define E_STEPPERS EXTRUDERS
#endif
#ifndef E_MANUAL
#define E_MANUAL EXTRUDERS
#endif
2020-04-20 06:56:55 +02:00
#if HOTENDS
#define HAS_HOTEND 1
2020-04-27 11:48:11 +02:00
#ifndef HOTEND_OVERSHOOT
#define HOTEND_OVERSHOOT 15
#endif
2020-04-27 11:49:31 +02:00
#if HOTENDS > 1
2020-04-20 06:56:55 +02:00
#define HAS_MULTI_HOTEND 1
#define HAS_HOTEND_OFFSET 1
#endif
2020-07-01 23:18:20 +02:00
#else
#undef PID_PARAMS_PER_HOTEND
2020-04-20 06:56:55 +02:00
#endif
// Helper macros for extruder and hotend arrays
#define HOTEND_LOOP() for (int8_t e = 0; e < HOTENDS; e++)
#define ARRAY_BY_EXTRUDERS(V...) ARRAY_N(EXTRUDERS, V)
#define ARRAY_BY_EXTRUDERS1(v1) ARRAY_BY_EXTRUDERS(v1, v1, v1, v1, v1, v1, v1, v1)
#define ARRAY_BY_HOTENDS(V...) ARRAY_N(HOTENDS, V)
#define ARRAY_BY_HOTENDS1(v1) ARRAY_BY_HOTENDS(v1, v1, v1, v1, v1, v1, v1, v1)
#if ENABLED(SWITCHING_EXTRUDER) && (DISABLED(SWITCHING_NOZZLE) || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR)
#define DO_SWITCH_EXTRUDER 1
#endif
/**
* Default hotend offsets, if not defined
*/
#if HAS_HOTEND_OFFSET
#ifndef HOTEND_OFFSET_X
#define HOTEND_OFFSET_X { 0 } // X offsets for each extruder
#endif
#ifndef HOTEND_OFFSET_Y
#define HOTEND_OFFSET_Y { 0 } // Y offsets for each extruder
#endif
#ifndef HOTEND_OFFSET_Z
#define HOTEND_OFFSET_Z { 0 } // Z offsets for each extruder
#endif
#endif
/**
* DISTINCT_E_FACTORS affects how some E factors are accessed
*/
#if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1
2020-05-05 07:28:39 +02:00
#define DISTINCT_E E_STEPPERS
#define XYZE_N (XYZ + E_STEPPERS)
2020-05-05 07:28:39 +02:00
#define E_INDEX_N(E) (E)
#define E_AXIS_N(E) AxisEnum(E_AXIS + E)
#define UNUSED_E(E) NOOP
#else
#undef DISTINCT_E_FACTORS
2020-05-05 07:28:39 +02:00
#define DISTINCT_E 1
#define XYZE_N XYZE
2020-05-05 07:28:39 +02:00
#define E_INDEX_N(E) 0
2019-01-31 03:55:05 +01:00
#define E_AXIS_N(E) E_AXIS
#define UNUSED_E(E) UNUSED(E)
#endif
2020-06-16 08:45:27 +02:00
#if ENABLED(DWIN_CREALITY_LCD)
#define SERIAL_CATCHALL 0
#endif
// Pressure sensor with a BLTouch-like interface
#if ENABLED(CREALITY_TOUCH)
#define BLTOUCH
#endif
/**
* The BLTouch Probe emulates a servo probe
* and uses "special" angles for its state.
*/
#if ENABLED(BLTOUCH)
2018-04-02 06:54:12 +02:00
#ifndef Z_PROBE_SERVO_NR
#define Z_PROBE_SERVO_NR 0
2016-12-04 05:02:27 +01:00
#endif
#undef DEACTIVATE_SERVOS_AFTER_MOVE
// Always disable probe pin inverting for BLTouch
#undef Z_MIN_PROBE_ENDSTOP_INVERTING
#define Z_MIN_PROBE_ENDSTOP_INVERTING false
#if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#undef Z_MIN_ENDSTOP_INVERTING
2019-03-17 11:57:25 +01:00
#define Z_MIN_ENDSTOP_INVERTING false
#endif
#endif
/**
2020-02-11 16:05:45 +01:00
* Set a flag for a servo probe (or BLTouch)
*/
#ifdef Z_PROBE_SERVO_NR
#define HAS_Z_SERVO_PROBE 1
#endif
2020-05-12 06:25:39 +02:00
#if ANY(HAS_Z_SERVO_PROBE, SWITCHING_EXTRUDER, SWITCHING_NOZZLE)
#define HAS_SERVO_ANGLES 1
#endif
#if !HAS_SERVO_ANGLES
#undef EDITABLE_SERVO_ANGLES
#endif
/**
2018-04-27 07:44:47 +02:00
* Set flags for enabled probes
*/
#if ANY(HAS_Z_SERVO_PROBE, FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, TOUCH_MI_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, SOLENOID_PROBE, SENSORLESS_PROBING, RACK_AND_PINION_PROBE)
#define HAS_BED_PROBE 1
#endif
2020-05-12 06:25:39 +02:00
#if ANY(HAS_BED_PROBE, PROBE_MANUALLY, MESH_BED_LEVELING)
#define PROBE_SELECTED 1
#endif
2016-09-19 06:28:11 +02:00
#if HAS_BED_PROBE
#if DISABLED(NOZZLE_AS_PROBE)
#define HAS_PROBE_XY_OFFSET 1
#endif
#if DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#define HAS_CUSTOM_PROBE_PIN 1
#endif
#if Z_HOME_DIR < 0 && (!HAS_CUSTOM_PROBE_PIN || ENABLED(USE_PROBE_FOR_Z_HOMING))
#define HOMING_Z_WITH_PROBE 1
#endif
#ifndef Z_PROBE_LOW_POINT
#define Z_PROBE_LOW_POINT -5
#endif
#if ENABLED(Z_PROBE_ALLEN_KEY)
#define PROBE_TRIGGERED_WHEN_STOWED_TEST 1 // Extra test for Allen Key Probe
#endif
#if MULTIPLE_PROBING > 1
#if EXTRA_PROBING > 0
#define TOTAL_PROBING (MULTIPLE_PROBING + EXTRA_PROBING)
#else
#define TOTAL_PROBING MULTIPLE_PROBING
#endif
#endif
#else
2018-04-27 07:44:47 +02:00
// Clear probe pin settings when no probe is selected
#undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
#endif
2020-03-14 05:18:16 +01:00
/**
* Set granular options based on the specific type of leveling
*/
#if ENABLED(AUTO_BED_LEVELING_UBL)
#undef LCD_BED_LEVELING
#if ENABLED(DELTA)
#define UBL_SEGMENTED 1
#endif
#endif
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT)
#define ABL_PLANAR 1
#endif
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
#define ABL_GRID 1
#endif
#if ANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_3POINT)
#define HAS_ABL_NOT_UBL 1
#endif
#if ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL, MESH_BED_LEVELING)
#define HAS_MESH 1
#endif
#if EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_3POINT)
#define NEEDS_THREE_PROBE_POINTS 1
#endif
#if EITHER(HAS_ABL_NOT_UBL, AUTO_BED_LEVELING_UBL)
#define HAS_ABL_OR_UBL 1
#if DISABLED(PROBE_MANUALLY)
#define HAS_AUTOLEVEL 1
#endif
#endif
#if EITHER(HAS_ABL_OR_UBL, MESH_BED_LEVELING)
#define HAS_LEVELING 1
#if DISABLED(AUTO_BED_LEVELING_UBL)
#define PLANNER_LEVELING 1
#endif
#endif
#if EITHER(HAS_ABL_OR_UBL, Z_MIN_PROBE_REPEATABILITY_TEST)
#define HAS_PROBING_PROCEDURE 1
#endif
#if !HAS_LEVELING
#undef RESTORE_LEVELING_AFTER_G28
#endif
2018-11-03 08:13:10 +01:00
#ifdef GRID_MAX_POINTS_X
#define GRID_MAX_POINTS ((GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y))
2020-03-14 05:18:16 +01:00
#define GRID_LOOP(A,B) LOOP_L_N(A, GRID_MAX_POINTS_X) LOOP_L_N(B, GRID_MAX_POINTS_Y)
2018-11-03 08:13:10 +01:00
#endif
#ifndef INVERT_X_DIR
#define INVERT_X_DIR false
#endif
#ifndef INVERT_Y_DIR
#define INVERT_Y_DIR false
#endif
#ifndef INVERT_Z_DIR
#define INVERT_Z_DIR false
#endif
#ifndef INVERT_E_DIR
#define INVERT_E_DIR false
#endif
2019-02-12 22:55:47 +01:00
#if ENABLED(SLIM_LCD_MENUS)
#define BOOT_MARLIN_LOGO_SMALL
#endif
// This flag indicates some kind of jerk storage is needed
2020-05-12 06:25:39 +02:00
#if EITHER(CLASSIC_JERK, IS_KINEMATIC)
#define HAS_CLASSIC_JERK 1
#endif
2020-04-24 03:49:11 +02:00
#if DISABLED(CLASSIC_JERK)
#define HAS_JUNCTION_DEVIATION 1
#endif
// E jerk exists with JD disabled (of course) but also when Linear Advance is disabled on Delta/SCARA
#if ENABLED(CLASSIC_JERK) || (IS_KINEMATIC && DISABLED(LIN_ADVANCE))
#define HAS_CLASSIC_E_JERK 1
#endif
#ifndef SPI_SPEED
#define SPI_SPEED SPI_FULL_SPEED
#endif
#if SERIAL_PORT == -1 || SERIAL_PORT_2 == -1
#define HAS_USB_SERIAL 1
#endif
/**
* This setting is also used by M109 when trying to calculate
* a ballpark safe margin to prevent wait-forever situation.
*/
#ifndef EXTRUDE_MINTEMP
#define EXTRUDE_MINTEMP 170
#endif
TFT Refactoring (#19192) * split tft folder in two: tft for color ui; tft_io for shared tft code * after the files got moved, now the code was moved to the right place * classic ui using TFT IO init lcd codes * feature to compile tft_io when enabled * compiling fix * lvgl spi tft working with tft io init codes * there is no need for separeted fsmc and spi class in lvgl anymore, as tft io handle everything * remove debug * base for TFT rotation and mirroring API, and ILI9488 support * ST7796S rotate and mirror support * ST7789V rotate and mirror support * ST7735 rotate and mirror support * ILI9341 rotate and mirror support * ILI9328 rotate and mirror support * R61505 rotate and mirror support * MKS TFT definitions * more configs for mks tfts * update config * naming typo * to configure the user interface * ANYCUBIC_TFT35 * tft configs * support for SSD1963 * tft display types * updated conditionals lcd; first board fully working with the new code - all 3 ui! * compatiblity * changed name * move classic ui file name * rename TURN -> ROTATE * GRAPHICAL_TFT_ROTATE_180 deprecated * first fsmc board fully working - chitu v5 * mks robin nano v1.2 + tft 35 ok! * right pin name * anycubic tft tested in a TRIGORILLA_PRO * chitu v6 * nano 32 tft orientation * mks tft43 * mks tft43 rotation * fixed LONGER LK tft setup * GRAPHICAL_TFT_UPSCALE defined by the display type * better offsets defaults * Update Configuration.h * Update tft_fsmc.cpp * Update Conditionals_LCD.h * Tweak comments * update nano tests * Revert "update nano tests" This reverts commit a071ebbfad30e28855a4a5695ec8a726542a1a65. * default tft * outdated comments * to not break non-vscode builds * upscale tft 35 * support tft 180 rotation for color ui * Each TFT Driver is responsible for its default color mode. * use auto detect in mks displays, because some of them could be shipped with diferent drivers * extra s * unused code * wrong -1 * missing mirror options * Smaller regex pattern * Comment updates * Clean up old defines * Apply pins formatting * GRAPHICAL_TFT_ROTATE_180 => TFT_ROTATE_180 * MKS_ROBIN_TFT_V1_1R * merge fix * correct resolution * auto is default, dont need be there, and it will allow the user to configure it even for named displays * to not use rotation with MKS_ROBIN_TFT_V1_1R * i like () in macros * avoid sleepy commits * default for st7789 is rgb * nano follow up * to allow ili9328 rotation * default is rgb * boards merge follow up * to match bootloader orientation * HAS_TOUCH_XPT2046 is not hal specific anymore * lets not forget LPC * 180 rotation for ili9328 and R61505 * Clean up whitespace Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-10-12 23:38:07 +02:00
/**
* TFT Displays
*
* Configure parameters for TFT displays:
* - TFT_DEFAULT_ORIENTATION
* - TFT_DRIVER
* - TFT_WIDTH
* - TFT_HEIGHT
* - TFT_INTERFACE_(SPI|FSMC)
* - TFT_COLOR
* - GRAPHICAL_TFT_UPSCALE
*/
#if ENABLED(MKS_TS35_V2_0)
// Most common: ST7796
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY)
#define TFT_WIDTH 480
#define TFT_HEIGHT 320
#define TFT_INTERFACE_SPI
#define GRAPHICAL_TFT_UPSCALE 3
#elif ENABLED(MKS_ROBIN_TFT24)
// Most common: ST7789
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y)
#define TFT_WIDTH 320
#define TFT_HEIGHT 240
#define TFT_INTERFACE_FSMC
#define GRAPHICAL_TFT_UPSCALE 2
#elif ENABLED(MKS_ROBIN_TFT28)
// Most common: ST7789
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y)
#define TFT_WIDTH 320
#define TFT_HEIGHT 240
#define TFT_INTERFACE_FSMC
#define GRAPHICAL_TFT_UPSCALE 2
#elif ENABLED(MKS_ROBIN_TFT32)
// Most common: ST7789
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y)
#define TFT_WIDTH 320
#define TFT_HEIGHT 240
#define TFT_INTERFACE_FSMC
#define GRAPHICAL_TFT_UPSCALE 2
#elif ENABLED(MKS_ROBIN_TFT35)
// Most common: ILI9488
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
#define TFT_WIDTH 480
#define TFT_HEIGHT 320
#define TFT_INTERFACE_FSMC
#define GRAPHICAL_TFT_UPSCALE 3
#elif ENABLED(MKS_ROBIN_TFT43)
#define TFT_DEFAULT_ORIENTATION 0
#define TFT_DRIVER SSD1963
#define TFT_WIDTH 480
#define TFT_HEIGHT 272
#define TFT_INTERFACE_FSMC
#define GRAPHICAL_TFT_UPSCALE 2
#elif ENABLED(MKS_ROBIN_TFT_V1_1R)
// ILI9328 or R61505
#define TFT_DEFAULT_ORIENTATION (TFT_INVERT_X | TFT_INVERT_Y | TFT_EXCHANGE_XY)
#define TFT_WIDTH 320
#define TFT_HEIGHT 240
#define TFT_INTERFACE_FSMC
#define GRAPHICAL_TFT_UPSCALE 2
#elif EITHER(TFT_TRONXY_X5SA, ANYCUBIC_TFT35)
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
#define TFT_DRIVER ILI9488
#define TFT_WIDTH 480
#define TFT_HEIGHT 320
#define TFT_INTERFACE_FSMC
#define GRAPHICAL_TFT_UPSCALE 3
#elif ENABLED(LONGER_LK_TFT28)
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
#define TFT_WIDTH 320
#define TFT_HEIGHT 240
#define TFT_INTERFACE_FSMC
#define GRAPHICAL_TFT_UPSCALE 2
#elif ENABLED(TFT_GENERIC)
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
#endif
// FSMC/SPI TFT Panels using standard HAL/tft/tft_(fsmc|spi).h
#if ENABLED(TFT_INTERFACE_FSMC)
#define HAS_FSMC_TFT 1
#if ENABLED(TFT_CLASSIC_UI)
#define FSMC_GRAPHICAL_TFT
#elif ENABLED(TFT_LVGL_UI)
#define TFT_LVGL_UI_FSMC
#endif
#elif ENABLED(TFT_INTERFACE_SPI)
#define HAS_SPI_TFT 1
#if ENABLED(TFT_CLASSIC_UI)
#define SPI_GRAPHICAL_TFT
#elif ENABLED(TFT_LVGL_UI)
#define TFT_LVGL_UI_SPI
#endif
#endif
#if ENABLED(TFT_COLOR_UI) && TFT_HEIGHT == 240
#if ENABLED(TFT_INTERFACE_SPI)
#define TFT_320x240_SPI
#elif ENABLED(TFT_INTERFACE_FSMC)
#define TFT_320x240
#endif
#elif ENABLED(TFT_COLOR_UI) && TFT_HEIGHT == 320
#if ENABLED(TFT_INTERFACE_SPI)
#define TFT_480x320_SPI
#elif ENABLED(TFT_INTERFACE_FSMC)
#define TFT_480x320
#endif
#endif
// Fewer lines with touch buttons on-screen
#if EITHER(TFT_320x240, TFT_320x240_SPI)
#define HAS_UI_320x240 1
#define LCD_HEIGHT TERN(TOUCH_SCREEN, 6, 7)
#elif EITHER(TFT_480x320, TFT_480x320_SPI)
#define HAS_UI_480x320 1
#define LCD_HEIGHT TERN(TOUCH_SCREEN, 6, 7)
#endif
// This emulated DOGM has 'touch/xpt2046', not 'tft/xpt2046'
#if ENABLED(TOUCH_SCREEN) && !HAS_GRAPHICAL_TFT
#undef TOUCH_SCREEN
#undef TOUCH_SCREEN_CALIBRATION
#define HAS_TOUCH_XPT2046 1
#endif