Fixes for FYSETC Touch EVE 5" on AVR (#17659)
Co-Authored-By: RudolphRiedel <rudolphriedel@users.noreply.github.com> Co-authored-by: sL1pKn07 <sl1pkn07@gmail.com>
This commit is contained in:
parent
d7f90c36df
commit
3a27933ae7
@ -1379,6 +1379,8 @@
|
|||||||
//#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
|
//#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
|
||||||
//#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
|
//#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
|
||||||
//#define S6_TFT_PINMAP // FYSETC S6 pin mapping
|
//#define S6_TFT_PINMAP // FYSETC S6 pin mapping
|
||||||
|
//#define E3_EXP1_PINMAP // E3 type boards (SKR E3/DIP, FYSETC Cheetah and Stock boards) EXP1 pin mapping
|
||||||
|
//#define GENERIC_EXP2_PINMAP // GENERIC EXP2 pin mapping
|
||||||
|
|
||||||
//#define OTHER_PIN_LAYOUT // Define pins manually below
|
//#define OTHER_PIN_LAYOUT // Define pins manually below
|
||||||
#if ENABLED(OTHER_PIN_LAYOUT)
|
#if ENABLED(OTHER_PIN_LAYOUT)
|
||||||
|
@ -361,7 +361,7 @@
|
|||||||
#define HAS_DGUS_LCD 1
|
#define HAS_DGUS_LCD 1
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Extensible UI serial touch screens. (See src/lcd/extensible_ui)
|
// Extensible UI serial touch screens. (See src/lcd/extui)
|
||||||
#if ANY(HAS_DGUS_LCD, MALYAN_LCD, TOUCH_UI_FTDI_EVE)
|
#if ANY(HAS_DGUS_LCD, MALYAN_LCD, TOUCH_UI_FTDI_EVE)
|
||||||
#define IS_EXTUI
|
#define IS_EXTUI
|
||||||
#define EXTENSIBLE_UI
|
#define EXTENSIBLE_UI
|
||||||
|
@ -58,7 +58,7 @@ void CLCD::FontMetrics::load(const uint8_t font) {
|
|||||||
uint16_t CLCD::FontMetrics::get_text_width(const char *str, size_t n) const {
|
uint16_t CLCD::FontMetrics::get_text_width(const char *str, size_t n) const {
|
||||||
uint16_t width = 0;
|
uint16_t width = 0;
|
||||||
const uint8_t *p = (const uint8_t *) str;
|
const uint8_t *p = (const uint8_t *) str;
|
||||||
for(;;) {
|
for (;;) {
|
||||||
const uint8_t val = *p++; n--;
|
const uint8_t val = *p++; n--;
|
||||||
if (!val || n == 0) break;
|
if (!val || n == 0) break;
|
||||||
width += val < 128 ? char_widths[val] : 0;
|
width += val < 128 ? char_widths[val] : 0;
|
||||||
@ -69,7 +69,7 @@ uint16_t CLCD::FontMetrics::get_text_width(const char *str, size_t n) const {
|
|||||||
uint16_t CLCD::FontMetrics::get_text_width(progmem_str str, size_t n) const {
|
uint16_t CLCD::FontMetrics::get_text_width(progmem_str str, size_t n) const {
|
||||||
uint16_t width = 0;
|
uint16_t width = 0;
|
||||||
const uint8_t *p = (const uint8_t *) str;
|
const uint8_t *p = (const uint8_t *) str;
|
||||||
for(;;) {
|
for (;;) {
|
||||||
const uint8_t val = pgm_read_byte(p++); n--;
|
const uint8_t val = pgm_read_byte(p++); n--;
|
||||||
if (!val || n == 0) break;
|
if (!val || n == 0) break;
|
||||||
width += val < 128 ? char_widths[val] : 0;
|
width += val < 128 ? char_widths[val] : 0;
|
||||||
@ -79,7 +79,7 @@ uint16_t CLCD::FontMetrics::get_text_width(progmem_str str, size_t n) const {
|
|||||||
|
|
||||||
/************************** HOST COMMAND FUNCTION *********************************/
|
/************************** HOST COMMAND FUNCTION *********************************/
|
||||||
|
|
||||||
void CLCD::host_cmd (unsigned char host_command, unsigned char byte2) { // Sends 24-Bit Host Command to LCD
|
void CLCD::host_cmd(unsigned char host_command, unsigned char byte2) { // Sends 24-Bit Host Command to LCD
|
||||||
if (host_command != FTDI::ACTIVE) {
|
if (host_command != FTDI::ACTIVE) {
|
||||||
host_command |= 0x40;
|
host_command |= 0x40;
|
||||||
}
|
}
|
||||||
@ -92,7 +92,7 @@ void CLCD::host_cmd (unsigned char host_command, unsigned char byte2) { // Send
|
|||||||
|
|
||||||
/************************** MEMORY READ FUNCTIONS *********************************/
|
/************************** MEMORY READ FUNCTIONS *********************************/
|
||||||
|
|
||||||
void CLCD::spi_read_addr (uint32_t reg_address) {
|
void CLCD::spi_read_addr(uint32_t reg_address) {
|
||||||
spi_send((reg_address >> 16) & 0x3F); // Address [21:16]
|
spi_send((reg_address >> 16) & 0x3F); // Address [21:16]
|
||||||
spi_send((reg_address >> 8 ) & 0xFF); // Address [15:8]
|
spi_send((reg_address >> 8 ) & 0xFF); // Address [15:8]
|
||||||
spi_send((reg_address >> 0) & 0xFF); // Address [7:0]
|
spi_send((reg_address >> 0) & 0xFF); // Address [7:0]
|
||||||
@ -100,7 +100,7 @@ void CLCD::spi_read_addr (uint32_t reg_address) {
|
|||||||
}
|
}
|
||||||
|
|
||||||
// Write 4-Byte Address, Read Multiple Bytes
|
// Write 4-Byte Address, Read Multiple Bytes
|
||||||
void CLCD::mem_read_bulk (uint32_t reg_address, uint8_t *data, uint16_t len) {
|
void CLCD::mem_read_bulk(uint32_t reg_address, uint8_t *data, uint16_t len) {
|
||||||
spi_ftdi_select();
|
spi_ftdi_select();
|
||||||
spi_read_addr(reg_address);
|
spi_read_addr(reg_address);
|
||||||
spi_read_bulk (data, len);
|
spi_read_bulk (data, len);
|
||||||
@ -108,7 +108,7 @@ void CLCD::mem_read_bulk (uint32_t reg_address, uint8_t *data, uint16_t len) {
|
|||||||
}
|
}
|
||||||
|
|
||||||
// Write 4-Byte Address, Read 1-Byte Data
|
// Write 4-Byte Address, Read 1-Byte Data
|
||||||
uint8_t CLCD::mem_read_8 (uint32_t reg_address) {
|
uint8_t CLCD::mem_read_8(uint32_t reg_address) {
|
||||||
spi_ftdi_select();
|
spi_ftdi_select();
|
||||||
spi_read_addr(reg_address);
|
spi_read_addr(reg_address);
|
||||||
uint8_t r_data = spi_read_8();
|
uint8_t r_data = spi_read_8();
|
||||||
@ -117,7 +117,7 @@ uint8_t CLCD::mem_read_8 (uint32_t reg_address) {
|
|||||||
}
|
}
|
||||||
|
|
||||||
// Write 4-Byte Address, Read 2-Bytes Data
|
// Write 4-Byte Address, Read 2-Bytes Data
|
||||||
uint16_t CLCD::mem_read_16 (uint32_t reg_address) {
|
uint16_t CLCD::mem_read_16(uint32_t reg_address) {
|
||||||
using namespace SPI::least_significant_byte_first;
|
using namespace SPI::least_significant_byte_first;
|
||||||
spi_ftdi_select();
|
spi_ftdi_select();
|
||||||
spi_read_addr(reg_address);
|
spi_read_addr(reg_address);
|
||||||
@ -127,7 +127,7 @@ uint16_t CLCD::mem_read_16 (uint32_t reg_address) {
|
|||||||
}
|
}
|
||||||
|
|
||||||
// Write 4-Byte Address, Read 4-Bytes Data
|
// Write 4-Byte Address, Read 4-Bytes Data
|
||||||
uint32_t CLCD::mem_read_32 (uint32_t reg_address) {
|
uint32_t CLCD::mem_read_32(uint32_t reg_address) {
|
||||||
using namespace SPI::least_significant_byte_first;
|
using namespace SPI::least_significant_byte_first;
|
||||||
spi_ftdi_select();
|
spi_ftdi_select();
|
||||||
spi_read_addr(reg_address);
|
spi_read_addr(reg_address);
|
||||||
@ -147,14 +147,14 @@ static inline uint8_t reverse_byte(uint8_t a) {
|
|||||||
}
|
}
|
||||||
static inline uint8_t xbm_write(const uint8_t *p) {return reverse_byte(pgm_read_byte(p));}
|
static inline uint8_t xbm_write(const uint8_t *p) {return reverse_byte(pgm_read_byte(p));}
|
||||||
|
|
||||||
void CLCD::spi_write_addr (uint32_t reg_address) {
|
void CLCD::spi_write_addr(uint32_t reg_address) {
|
||||||
spi_send((reg_address >> 16) | 0x80); // Address [21:16]
|
spi_send((reg_address >> 16) | 0x80); // Address [21:16]
|
||||||
spi_send((reg_address >> 8 ) & 0xFF); // Address [15:8]
|
spi_send((reg_address >> 8 ) & 0xFF); // Address [15:8]
|
||||||
spi_send((reg_address >> 0) & 0xFF); // Address [7:0]
|
spi_send((reg_address >> 0) & 0xFF); // Address [7:0]
|
||||||
}
|
}
|
||||||
|
|
||||||
// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from RAM
|
// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from RAM
|
||||||
void CLCD::mem_write_bulk (uint32_t reg_address, const void *data, uint16_t len, uint8_t padding) {
|
void CLCD::mem_write_bulk(uint32_t reg_address, const void *data, uint16_t len, uint8_t padding) {
|
||||||
spi_ftdi_select();
|
spi_ftdi_select();
|
||||||
spi_write_addr(reg_address);
|
spi_write_addr(reg_address);
|
||||||
spi_write_bulk<ram_write>(data, len, padding);
|
spi_write_bulk<ram_write>(data, len, padding);
|
||||||
@ -162,7 +162,7 @@ void CLCD::mem_write_bulk (uint32_t reg_address, const void *data, uint16_t len,
|
|||||||
}
|
}
|
||||||
|
|
||||||
// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM
|
// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM
|
||||||
void CLCD::mem_write_bulk (uint32_t reg_address, progmem_str str, uint16_t len, uint8_t padding) {
|
void CLCD::mem_write_bulk(uint32_t reg_address, progmem_str str, uint16_t len, uint8_t padding) {
|
||||||
spi_ftdi_select();
|
spi_ftdi_select();
|
||||||
spi_write_addr(reg_address);
|
spi_write_addr(reg_address);
|
||||||
spi_write_bulk<pgm_write>(str, len, padding);
|
spi_write_bulk<pgm_write>(str, len, padding);
|
||||||
@ -170,7 +170,7 @@ void CLCD::mem_write_bulk (uint32_t reg_address, progmem_str str, uint16_t len,
|
|||||||
}
|
}
|
||||||
|
|
||||||
// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM
|
// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM
|
||||||
void CLCD::mem_write_pgm (uint32_t reg_address, const void *data, uint16_t len, uint8_t padding) {
|
void CLCD::mem_write_pgm(uint32_t reg_address, const void *data, uint16_t len, uint8_t padding) {
|
||||||
spi_ftdi_select();
|
spi_ftdi_select();
|
||||||
spi_write_addr(reg_address);
|
spi_write_addr(reg_address);
|
||||||
spi_write_bulk<pgm_write>(data, len, padding);
|
spi_write_bulk<pgm_write>(data, len, padding);
|
||||||
@ -178,7 +178,7 @@ void CLCD::mem_write_pgm (uint32_t reg_address, const void *data, uint16_t len,
|
|||||||
}
|
}
|
||||||
|
|
||||||
// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM, reversing bytes (suitable for loading XBM images)
|
// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM, reversing bytes (suitable for loading XBM images)
|
||||||
void CLCD::mem_write_xbm (uint32_t reg_address, progmem_str data, uint16_t len, uint8_t padding) {
|
void CLCD::mem_write_xbm(uint32_t reg_address, progmem_str data, uint16_t len, uint8_t padding) {
|
||||||
spi_ftdi_select();
|
spi_ftdi_select();
|
||||||
spi_write_addr(reg_address);
|
spi_write_addr(reg_address);
|
||||||
spi_write_bulk<xbm_write>(data, len, padding);
|
spi_write_bulk<xbm_write>(data, len, padding);
|
||||||
@ -186,7 +186,7 @@ void CLCD::mem_write_xbm (uint32_t reg_address, progmem_str data, uint16_t len,
|
|||||||
}
|
}
|
||||||
|
|
||||||
// Write 3-Byte Address, Write 1-Byte Data
|
// Write 3-Byte Address, Write 1-Byte Data
|
||||||
void CLCD::mem_write_8 (uint32_t reg_address, uint8_t data) {
|
void CLCD::mem_write_8(uint32_t reg_address, uint8_t data) {
|
||||||
spi_ftdi_select();
|
spi_ftdi_select();
|
||||||
spi_write_addr(reg_address);
|
spi_write_addr(reg_address);
|
||||||
spi_write_8(data);
|
spi_write_8(data);
|
||||||
@ -194,16 +194,16 @@ void CLCD::mem_write_8 (uint32_t reg_address, uint8_t data) {
|
|||||||
}
|
}
|
||||||
|
|
||||||
// Write 3-Byte Address, Write 2-Bytes Data
|
// Write 3-Byte Address, Write 2-Bytes Data
|
||||||
void CLCD::mem_write_16 (uint32_t reg_address, uint16_t data) {
|
void CLCD::mem_write_16(uint32_t reg_address, uint16_t data) {
|
||||||
using namespace SPI::least_significant_byte_first;
|
using namespace SPI::least_significant_byte_first;
|
||||||
spi_ftdi_select();
|
spi_ftdi_select();
|
||||||
spi_write_addr(reg_address);
|
spi_write_addr(reg_address);
|
||||||
spi_write_32(data);
|
spi_write_16(data);
|
||||||
spi_ftdi_deselect();
|
spi_ftdi_deselect();
|
||||||
}
|
}
|
||||||
|
|
||||||
// Write 3-Byte Address, Write 4-Bytes Data
|
// Write 3-Byte Address, Write 4-Bytes Data
|
||||||
void CLCD::mem_write_32 (uint32_t reg_address, uint32_t data) {
|
void CLCD::mem_write_32(uint32_t reg_address, uint32_t data) {
|
||||||
using namespace SPI::least_significant_byte_first;
|
using namespace SPI::least_significant_byte_first;
|
||||||
spi_ftdi_select();
|
spi_ftdi_select();
|
||||||
spi_write_addr(reg_address);
|
spi_write_addr(reg_address);
|
||||||
@ -281,7 +281,7 @@ void CLCD::CommandFifo::text(int16_t x, int16_t y, int16_t font, uint16_t optio
|
|||||||
}
|
}
|
||||||
|
|
||||||
// This sends the a toggle command to the command preprocessor, must be followed by str()
|
// This sends the a toggle command to the command preprocessor, must be followed by str()
|
||||||
void CLCD::CommandFifo::toggle (int16_t x, int16_t y, int16_t w, int16_t font, uint16_t options, bool state) {
|
void CLCD::CommandFifo::toggle(int16_t x, int16_t y, int16_t w, int16_t font, uint16_t options, bool state) {
|
||||||
struct {
|
struct {
|
||||||
int32_t type = CMD_TOGGLE;
|
int32_t type = CMD_TOGGLE;
|
||||||
int16_t x;
|
int16_t x;
|
||||||
@ -303,7 +303,7 @@ void CLCD::CommandFifo::toggle (int16_t x, int16_t y, int16_t w, int16_t font, u
|
|||||||
}
|
}
|
||||||
|
|
||||||
// This sends the a keys command to the command preprocessor, must be followed by str()
|
// This sends the a keys command to the command preprocessor, must be followed by str()
|
||||||
void CLCD::CommandFifo::keys (int16_t x, int16_t y, int16_t w, int16_t h, int16_t font, uint16_t options) {
|
void CLCD::CommandFifo::keys(int16_t x, int16_t y, int16_t w, int16_t h, int16_t font, uint16_t options) {
|
||||||
struct {
|
struct {
|
||||||
int32_t type = CMD_KEYS;
|
int32_t type = CMD_KEYS;
|
||||||
int16_t x;
|
int16_t x;
|
||||||
@ -324,7 +324,7 @@ void CLCD::CommandFifo::keys (int16_t x, int16_t y, int16_t w, int16_t h, int16_
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::clock (int16_t x, int16_t y, int16_t r, uint16_t options, int16_t h, int16_t m, int16_t s, int16_t ms)
|
void CLCD::CommandFifo::clock(int16_t x, int16_t y, int16_t r, uint16_t options, int16_t h, int16_t m, int16_t s, int16_t ms)
|
||||||
{
|
{
|
||||||
struct {
|
struct {
|
||||||
int32_t type = CMD_CLOCK;
|
int32_t type = CMD_CLOCK;
|
||||||
@ -350,7 +350,7 @@ void CLCD::CommandFifo::clock (int16_t x, int16_t y, int16_t r, uint16_t options
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::gauge (int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t major, uint16_t minor, uint16_t val, uint16_t range)
|
void CLCD::CommandFifo::gauge(int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t major, uint16_t minor, uint16_t val, uint16_t range)
|
||||||
{
|
{
|
||||||
struct {
|
struct {
|
||||||
int32_t type = CMD_GAUGE;
|
int32_t type = CMD_GAUGE;
|
||||||
@ -376,7 +376,7 @@ void CLCD::CommandFifo::gauge (int16_t x, int16_t y, int16_t r, uint16_t options
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::dial (int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t val)
|
void CLCD::CommandFifo::dial(int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t val)
|
||||||
{
|
{
|
||||||
struct {
|
struct {
|
||||||
int32_t type = CMD_DIAL;
|
int32_t type = CMD_DIAL;
|
||||||
@ -396,7 +396,7 @@ void CLCD::CommandFifo::dial (int16_t x, int16_t y, int16_t r, uint16_t options,
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::scrollbar (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t size, uint16_t range) {
|
void CLCD::CommandFifo::scrollbar(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t size, uint16_t range) {
|
||||||
struct {
|
struct {
|
||||||
int32_t type = CMD_SCROLLBAR;
|
int32_t type = CMD_SCROLLBAR;
|
||||||
int16_t x;
|
int16_t x;
|
||||||
@ -421,7 +421,7 @@ void CLCD::CommandFifo::scrollbar (int16_t x, int16_t y, int16_t w, int16_t h, u
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::progress (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range) {
|
void CLCD::CommandFifo::progress(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range) {
|
||||||
struct {
|
struct {
|
||||||
int32_t type = CMD_PROGRESS;
|
int32_t type = CMD_PROGRESS;
|
||||||
int16_t x;
|
int16_t x;
|
||||||
@ -444,7 +444,7 @@ void CLCD::CommandFifo::progress (int16_t x, int16_t y, int16_t w, int16_t h, ui
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::slider (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range) {
|
void CLCD::CommandFifo::slider(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range) {
|
||||||
struct {
|
struct {
|
||||||
int32_t type = CMD_SLIDER;
|
int32_t type = CMD_SLIDER;
|
||||||
int16_t x;
|
int16_t x;
|
||||||
@ -467,7 +467,7 @@ void CLCD::CommandFifo::slider (int16_t x, int16_t y, int16_t w, int16_t h, uint
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::gradient (int16_t x0, int16_t y0, uint32_t rgb0, int16_t x1, int16_t y1, uint32_t rgb1) {
|
void CLCD::CommandFifo::gradient(int16_t x0, int16_t y0, uint32_t rgb0, int16_t x1, int16_t y1, uint32_t rgb1) {
|
||||||
struct {
|
struct {
|
||||||
int32_t type = CMD_GRADIENT;
|
int32_t type = CMD_GRADIENT;
|
||||||
int16_t x0;
|
int16_t x0;
|
||||||
@ -488,7 +488,7 @@ void CLCD::CommandFifo::gradient (int16_t x0, int16_t y0, uint32_t rgb0, int16_t
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::number (int16_t x, int16_t y, int16_t font, uint16_t options, int32_t n) {
|
void CLCD::CommandFifo::number(int16_t x, int16_t y, int16_t font, uint16_t options, int32_t n) {
|
||||||
struct {
|
struct {
|
||||||
int32_t type = CMD_NUMBER;
|
int32_t type = CMD_NUMBER;
|
||||||
int16_t x;
|
int16_t x;
|
||||||
@ -507,7 +507,7 @@ void CLCD::CommandFifo::number (int16_t x, int16_t y, int16_t font, uint16_t opt
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::memzero (uint32_t ptr, uint32_t size) {
|
void CLCD::CommandFifo::memzero(uint32_t ptr, uint32_t size) {
|
||||||
struct {
|
struct {
|
||||||
uint32_t type = CMD_MEMZERO;
|
uint32_t type = CMD_MEMZERO;
|
||||||
uint32_t ptr;
|
uint32_t ptr;
|
||||||
@ -520,7 +520,7 @@ void CLCD::CommandFifo::memzero (uint32_t ptr, uint32_t size) {
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::memset (uint32_t ptr, uint32_t val, uint32_t size) {
|
void CLCD::CommandFifo::memset(uint32_t ptr, uint32_t val, uint32_t size) {
|
||||||
struct {
|
struct {
|
||||||
uint32_t type = CMD_MEMSET;
|
uint32_t type = CMD_MEMSET;
|
||||||
uint32_t ptr;
|
uint32_t ptr;
|
||||||
@ -535,7 +535,7 @@ void CLCD::CommandFifo::memset (uint32_t ptr, uint32_t val, uint32_t size) {
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::memcpy (uint32_t dst, uint32_t src, uint32_t size) {
|
void CLCD::CommandFifo::memcpy(uint32_t dst, uint32_t src, uint32_t size) {
|
||||||
struct {
|
struct {
|
||||||
uint32_t type = CMD_MEMCPY;
|
uint32_t type = CMD_MEMCPY;
|
||||||
uint32_t dst;
|
uint32_t dst;
|
||||||
@ -550,7 +550,7 @@ void CLCD::CommandFifo::memcpy (uint32_t dst, uint32_t src, uint32_t size) {
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::memcrc (uint32_t ptr, uint32_t num, uint32_t result) {
|
void CLCD::CommandFifo::memcrc(uint32_t ptr, uint32_t num, uint32_t result) {
|
||||||
struct {
|
struct {
|
||||||
uint32_t type = CMD_MEMCRC;
|
uint32_t type = CMD_MEMCRC;
|
||||||
uint32_t ptr;
|
uint32_t ptr;
|
||||||
@ -565,7 +565,7 @@ void CLCD::CommandFifo::memcrc (uint32_t ptr, uint32_t num, uint32_t result) {
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::memwrite (uint32_t ptr, uint32_t value) {
|
void CLCD::CommandFifo::memwrite(uint32_t ptr, uint32_t value) {
|
||||||
struct {
|
struct {
|
||||||
uint32_t type = CMD_MEMWRITE;
|
uint32_t type = CMD_MEMWRITE;
|
||||||
uint32_t ptr;
|
uint32_t ptr;
|
||||||
@ -580,7 +580,7 @@ void CLCD::CommandFifo::memwrite (uint32_t ptr, uint32_t value) {
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::append (uint32_t ptr, uint32_t size) {
|
void CLCD::CommandFifo::append(uint32_t ptr, uint32_t size) {
|
||||||
struct {
|
struct {
|
||||||
uint32_t type = CMD_APPEND;
|
uint32_t type = CMD_APPEND;
|
||||||
uint32_t ptr;
|
uint32_t ptr;
|
||||||
@ -593,7 +593,7 @@ void CLCD::CommandFifo::append (uint32_t ptr, uint32_t size) {
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::inflate (uint32_t ptr) {
|
void CLCD::CommandFifo::inflate(uint32_t ptr) {
|
||||||
struct {
|
struct {
|
||||||
uint32_t type = CMD_INFLATE;
|
uint32_t type = CMD_INFLATE;
|
||||||
uint32_t ptr;
|
uint32_t ptr;
|
||||||
@ -604,7 +604,7 @@ void CLCD::CommandFifo::inflate (uint32_t ptr) {
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::getptr (uint32_t result) {
|
void CLCD::CommandFifo::getptr(uint32_t result) {
|
||||||
struct {
|
struct {
|
||||||
uint32_t type = CMD_GETPTR;
|
uint32_t type = CMD_GETPTR;
|
||||||
uint32_t result;
|
uint32_t result;
|
||||||
@ -696,7 +696,7 @@ void CLCD::CommandFifo::loadimage(uint32_t ptr, uint32_t options) {
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::getprops (uint32_t ptr, uint32_t width, uint32_t height) {
|
void CLCD::CommandFifo::getprops(uint32_t ptr, uint32_t width, uint32_t height) {
|
||||||
struct {
|
struct {
|
||||||
uint32_t type = CMD_GETPROPS;
|
uint32_t type = CMD_GETPROPS;
|
||||||
uint32_t ptr;
|
uint32_t ptr;
|
||||||
@ -735,7 +735,7 @@ void CLCD::CommandFifo::rotate(int32_t a) {
|
|||||||
cmd( &cmd_data, sizeof(cmd_data) );
|
cmd( &cmd_data, sizeof(cmd_data) );
|
||||||
}
|
}
|
||||||
|
|
||||||
void CLCD::CommandFifo::translate (int32_t tx, int32_t ty) {
|
void CLCD::CommandFifo::translate(int32_t tx, int32_t ty) {
|
||||||
struct {
|
struct {
|
||||||
uint32_t type = CMD_TRANSLATE;
|
uint32_t type = CMD_TRANSLATE;
|
||||||
int32_t tx;
|
int32_t tx;
|
||||||
@ -749,7 +749,7 @@ void CLCD::CommandFifo::translate (int32_t tx, int32_t ty) {
|
|||||||
}
|
}
|
||||||
|
|
||||||
#if FTDI_API_LEVEL >= 810
|
#if FTDI_API_LEVEL >= 810
|
||||||
void CLCD::CommandFifo::setbase (uint8_t base) {
|
void CLCD::CommandFifo::setbase(uint8_t base) {
|
||||||
struct {
|
struct {
|
||||||
int32_t type = CMD_SETBASE;
|
int32_t type = CMD_SETBASE;
|
||||||
uint32_t base;
|
uint32_t base;
|
||||||
@ -855,7 +855,7 @@ void CLCD::CommandFifo::playvideo(uint32_t options) {
|
|||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if FTDI_API_LEVEL >= 810
|
#if FTDI_API_LEVEL >= 810
|
||||||
void CLCD::CommandFifo::setrotate (uint8_t rotation) {
|
void CLCD::CommandFifo::setrotate(uint8_t rotation) {
|
||||||
struct {
|
struct {
|
||||||
uint32_t type = CMD_SETROTATE;
|
uint32_t type = CMD_SETROTATE;
|
||||||
uint32_t rotation;
|
uint32_t rotation;
|
||||||
@ -868,7 +868,7 @@ void CLCD::CommandFifo::setrotate (uint8_t rotation) {
|
|||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if FTDI_API_LEVEL >= 810
|
#if FTDI_API_LEVEL >= 810
|
||||||
void CLCD::CommandFifo::romfont (uint8_t font, uint8_t romslot) {
|
void CLCD::CommandFifo::romfont(uint8_t font, uint8_t romslot) {
|
||||||
struct {
|
struct {
|
||||||
uint32_t type = CMD_ROMFONT;
|
uint32_t type = CMD_ROMFONT;
|
||||||
uint32_t font;
|
uint32_t font;
|
||||||
@ -1054,18 +1054,12 @@ void CLCD::init() {
|
|||||||
spi_init(); // Set Up I/O Lines for SPI and FT800/810 Control
|
spi_init(); // Set Up I/O Lines for SPI and FT800/810 Control
|
||||||
ftdi_reset(); // Power down/up the FT8xx with the apropriate delays
|
ftdi_reset(); // Power down/up the FT8xx with the apropriate delays
|
||||||
|
|
||||||
if (Use_Crystal == 1) {
|
host_cmd(Use_Crystal ? CLKEXT : CLKINT, 0);
|
||||||
host_cmd(CLKEXT, 0);
|
|
||||||
}
|
|
||||||
else {
|
|
||||||
host_cmd(CLKINT, 0);
|
|
||||||
}
|
|
||||||
|
|
||||||
host_cmd(FTDI::ACTIVE, 0); // Activate the System Clock
|
host_cmd(FTDI::ACTIVE, 0); // Activate the System Clock
|
||||||
|
|
||||||
/* read the device-id until it returns 0x7c or times out, should take less than 150ms */
|
/* read the device-id until it returns 0x7c or times out, should take less than 150ms */
|
||||||
uint8_t counter;
|
uint8_t counter;
|
||||||
for(counter = 0; counter < 250; counter++) {
|
for (counter = 0; counter < 250; counter++) {
|
||||||
uint8_t device_id = mem_read_8(REG::ID); // Read Device ID, Should Be 0x7C;
|
uint8_t device_id = mem_read_8(REG::ID); // Read Device ID, Should Be 0x7C;
|
||||||
if (device_id == 0x7c) {
|
if (device_id == 0x7c) {
|
||||||
#if ENABLED(TOUCH_UI_DEBUG)
|
#if ENABLED(TOUCH_UI_DEBUG)
|
||||||
@ -1073,9 +1067,9 @@ void CLCD::init() {
|
|||||||
#endif
|
#endif
|
||||||
break;
|
break;
|
||||||
}
|
}
|
||||||
else {
|
else
|
||||||
delay(1);
|
delay(1);
|
||||||
}
|
|
||||||
if (counter == 249) {
|
if (counter == 249) {
|
||||||
#if ENABLED(TOUCH_UI_DEBUG)
|
#if ENABLED(TOUCH_UI_DEBUG)
|
||||||
SERIAL_ECHO_START();
|
SERIAL_ECHO_START();
|
||||||
@ -1130,7 +1124,7 @@ void CLCD::init() {
|
|||||||
|
|
||||||
mem_write_8(REG::PCLK, Pclk); // Turns on Clock by setting PCLK Register to the value necessary for the module
|
mem_write_8(REG::PCLK, Pclk); // Turns on Clock by setting PCLK Register to the value necessary for the module
|
||||||
|
|
||||||
mem_write_16(REG::PWM_HZ, 0x00FA);
|
mem_write_16(REG::PWM_HZ, ENABLED(LCD_FYSETC_TFT81050) ? 0x2710 : 0x00FA);
|
||||||
|
|
||||||
// Turning off dithering seems to help prevent horizontal line artifacts on certain colors
|
// Turning off dithering seems to help prevent horizontal line artifacts on certain colors
|
||||||
mem_write_8(REG::DITHER, 0);
|
mem_write_8(REG::DITHER, 0);
|
||||||
|
@ -27,7 +27,11 @@
|
|||||||
/********************************* SPI Functions *********************************/
|
/********************************* SPI Functions *********************************/
|
||||||
|
|
||||||
namespace FTDI {
|
namespace FTDI {
|
||||||
|
|
||||||
#ifndef CLCD_USE_SOFT_SPI
|
#ifndef CLCD_USE_SOFT_SPI
|
||||||
|
#ifndef __AVR__
|
||||||
|
SPIClass EVE_SPI(CLCD_SPI_BUS);
|
||||||
|
#endif
|
||||||
SPISettings SPI::spi_settings(SPI_FREQUENCY, MSBFIRST, SPI_MODE0);
|
SPISettings SPI::spi_settings(SPI_FREQUENCY, MSBFIRST, SPI_MODE0);
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
@ -57,12 +61,12 @@ namespace FTDI {
|
|||||||
|
|
||||||
SET_INPUT_PULLUP(CLCD_SOFT_SPI_MISO);
|
SET_INPUT_PULLUP(CLCD_SOFT_SPI_MISO);
|
||||||
#else
|
#else
|
||||||
::SPI.begin();
|
SPI_OBJ.begin();
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
#ifdef CLCD_USE_SOFT_SPI
|
#ifdef CLCD_USE_SOFT_SPI
|
||||||
uint8_t SPI::_soft_spi_xfer (uint8_t spiOutByte) {
|
uint8_t SPI::_soft_spi_xfer(uint8_t spiOutByte) {
|
||||||
uint8_t spiIndex = 0x80;
|
uint8_t spiIndex = 0x80;
|
||||||
uint8_t spiInByte = 0;
|
uint8_t spiInByte = 0;
|
||||||
uint8_t k;
|
uint8_t k;
|
||||||
@ -71,8 +75,8 @@ namespace FTDI {
|
|||||||
for (k = 0; k < 8; k++) { // Output and Read each bit of spiOutByte and spiInByte
|
for (k = 0; k < 8; k++) { // Output and Read each bit of spiOutByte and spiInByte
|
||||||
WRITE(CLCD_SOFT_SPI_MOSI, (spiOutByte & spiIndex) ? 1 : 0); // Output MOSI Bit
|
WRITE(CLCD_SOFT_SPI_MOSI, (spiOutByte & spiIndex) ? 1 : 0); // Output MOSI Bit
|
||||||
WRITE(CLCD_SOFT_SPI_SCLK, 1); // Pulse Clock
|
WRITE(CLCD_SOFT_SPI_SCLK, 1); // Pulse Clock
|
||||||
|
if (READ(CLCD_SOFT_SPI_MISO)) spiInByte |= spiIndex; // MISO changes on the falling edge of clock, so sample it before
|
||||||
WRITE(CLCD_SOFT_SPI_SCLK, 0);
|
WRITE(CLCD_SOFT_SPI_SCLK, 0);
|
||||||
if (READ(CLCD_SOFT_SPI_MISO)) spiInByte |= spiIndex;
|
|
||||||
spiIndex >>= 1;
|
spiIndex >>= 1;
|
||||||
}
|
}
|
||||||
interrupts();
|
interrupts();
|
||||||
@ -81,7 +85,7 @@ namespace FTDI {
|
|||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifdef CLCD_USE_SOFT_SPI
|
#ifdef CLCD_USE_SOFT_SPI
|
||||||
void SPI::_soft_spi_send (uint8_t spiOutByte) {
|
void SPI::_soft_spi_send(uint8_t spiOutByte) {
|
||||||
uint8_t k, spiIndex = 0x80;
|
uint8_t k, spiIndex = 0x80;
|
||||||
|
|
||||||
noInterrupts();
|
noInterrupts();
|
||||||
@ -95,16 +99,12 @@ namespace FTDI {
|
|||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
void SPI::spi_read_bulk (void *data, uint16_t len) {
|
void SPI::spi_read_bulk(void *data, uint16_t len) {
|
||||||
uint8_t* p = (uint8_t *)data;
|
uint8_t* p = (uint8_t *)data;
|
||||||
#ifndef CLCD_USE_SOFT_SPI
|
|
||||||
::SPI.transfer(p, len);
|
|
||||||
#else
|
|
||||||
while (len--) *p++ = spi_recv();
|
while (len--) *p++ = spi_recv();
|
||||||
#endif
|
|
||||||
}
|
}
|
||||||
|
|
||||||
bool SPI::spi_verify_bulk (const void *data, uint16_t len) {
|
bool SPI::spi_verify_bulk(const void *data, uint16_t len) {
|
||||||
const uint8_t* p = (const uint8_t *)data;
|
const uint8_t* p = (const uint8_t *)data;
|
||||||
while (len--) if (*p++ != spi_recv()) return false;
|
while (len--) if (*p++ != spi_recv()) return false;
|
||||||
return true;
|
return true;
|
||||||
@ -113,7 +113,7 @@ namespace FTDI {
|
|||||||
// CLCD SPI - Chip Select
|
// CLCD SPI - Chip Select
|
||||||
void SPI::spi_ftdi_select() {
|
void SPI::spi_ftdi_select() {
|
||||||
#ifndef CLCD_USE_SOFT_SPI
|
#ifndef CLCD_USE_SOFT_SPI
|
||||||
::SPI.beginTransaction(spi_settings);
|
SPI_OBJ.beginTransaction(spi_settings);
|
||||||
#endif
|
#endif
|
||||||
WRITE(CLCD_SPI_CS, 0);
|
WRITE(CLCD_SPI_CS, 0);
|
||||||
#ifdef CLCD_SPI_EXTRA_CS
|
#ifdef CLCD_SPI_EXTRA_CS
|
||||||
@ -129,25 +129,25 @@ namespace FTDI {
|
|||||||
WRITE(CLCD_SPI_EXTRA_CS, 1);
|
WRITE(CLCD_SPI_EXTRA_CS, 1);
|
||||||
#endif
|
#endif
|
||||||
#ifndef CLCD_USE_SOFT_SPI
|
#ifndef CLCD_USE_SOFT_SPI
|
||||||
::SPI.endTransaction();
|
SPI_OBJ.endTransaction();
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
#ifdef SPI_FLASH_SS
|
#ifdef SPI_FLASH_SS
|
||||||
// Serial SPI Flash SPI - Chip Select
|
// Serial SPI Flash SPI - Chip Select
|
||||||
void SPI::spi_flash_select () {
|
void SPI::spi_flash_select() {
|
||||||
#ifndef CLCD_USE_SOFT_SPI
|
#ifndef CLCD_USE_SOFT_SPI
|
||||||
::SPI.beginTransaction(spi_settings);
|
SPI_OBJ.beginTransaction(spi_settings);
|
||||||
#endif
|
#endif
|
||||||
WRITE(SPI_FLASH_SS, 0);
|
WRITE(SPI_FLASH_SS, 0);
|
||||||
delayMicroseconds(1);
|
delayMicroseconds(1);
|
||||||
}
|
}
|
||||||
|
|
||||||
// Serial SPI Flash SPI - Chip Deselect
|
// Serial SPI Flash SPI - Chip Deselect
|
||||||
void SPI::spi_flash_deselect () {
|
void SPI::spi_flash_deselect() {
|
||||||
WRITE(SPI_FLASH_SS, 1);
|
WRITE(SPI_FLASH_SS, 1);
|
||||||
#ifndef CLCD_USE_SOFT_SPI
|
#ifndef CLCD_USE_SOFT_SPI
|
||||||
::SPI.endTransaction();
|
SPI_OBJ.endTransaction();
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
|
@ -27,6 +27,14 @@
|
|||||||
#endif
|
#endif
|
||||||
|
|
||||||
namespace FTDI {
|
namespace FTDI {
|
||||||
|
|
||||||
|
#if defined(__AVR__) || defined(CLCD_USE_SOFT_SPI)
|
||||||
|
#define SPI_OBJ ::SPI
|
||||||
|
#else
|
||||||
|
extern SPIClass EVE_SPI;
|
||||||
|
#define SPI_OBJ EVE_SPI
|
||||||
|
#endif
|
||||||
|
|
||||||
namespace SPI {
|
namespace SPI {
|
||||||
#ifndef CLCD_USE_SOFT_SPI
|
#ifndef CLCD_USE_SOFT_SPI
|
||||||
extern SPISettings spi_settings;
|
extern SPISettings spi_settings;
|
||||||
@ -47,7 +55,7 @@ namespace FTDI {
|
|||||||
#ifdef CLCD_USE_SOFT_SPI
|
#ifdef CLCD_USE_SOFT_SPI
|
||||||
return _soft_spi_xfer(0x00);
|
return _soft_spi_xfer(0x00);
|
||||||
#else
|
#else
|
||||||
return ::SPI.transfer(0x00);
|
SPI_OBJ.transfer(0x00);
|
||||||
#endif
|
#endif
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -55,7 +63,7 @@ namespace FTDI {
|
|||||||
#ifdef CLCD_USE_SOFT_SPI
|
#ifdef CLCD_USE_SOFT_SPI
|
||||||
_soft_spi_send(val);
|
_soft_spi_send(val);
|
||||||
#else
|
#else
|
||||||
::SPI.transfer(val);
|
SPI_OBJ.transfer(val);
|
||||||
#endif
|
#endif
|
||||||
};
|
};
|
||||||
|
|
||||||
|
@ -30,9 +30,9 @@ class SoundList {
|
|||||||
public:
|
public:
|
||||||
static const uint8_t n;
|
static const uint8_t n;
|
||||||
static inline const char* name(uint8_t val) {
|
static inline const char* name(uint8_t val) {
|
||||||
return (const char* ) pgm_read_ptr_near(&list[val].name);
|
return (const char* ) pgm_read_ptr_far(&list[val].name);
|
||||||
}
|
}
|
||||||
static inline FTDI::SoundPlayer::sound_t* data(uint8_t val) {
|
static inline FTDI::SoundPlayer::sound_t* data(uint8_t val) {
|
||||||
return (FTDI::SoundPlayer::sound_t*) pgm_read_ptr_near(&list[val].data);
|
return (FTDI::SoundPlayer::sound_t*) pgm_read_ptr_far(&list[val].data);
|
||||||
}
|
}
|
||||||
};
|
};
|
||||||
|
@ -154,3 +154,12 @@
|
|||||||
#define CLCD_SPI_EXTRA_CS SDSS
|
#define CLCD_SPI_EXTRA_CS SDSS
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if EITHER(E3_EXP1_PINMAP, GENERIC_EXP2_PINMAP)
|
||||||
|
#ifndef __MARLIN_FIRMWARE__
|
||||||
|
#error "This pin mapping requires Marlin."
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define CLCD_MOD_RESET BTN_EN1
|
||||||
|
#define CLCD_SPI_CS LCD_PINS_RS
|
||||||
|
#endif
|
||||||
|
@ -82,7 +82,7 @@ void AboutScreen::onRedraw(draw_mode_t) {
|
|||||||
);
|
);
|
||||||
draw_text_box(cmd, FW_VERS_POS, progmem_str(getFirmwareName_str()), OPT_CENTER, font_medium);
|
draw_text_box(cmd, FW_VERS_POS, progmem_str(getFirmwareName_str()), OPT_CENTER, font_medium);
|
||||||
draw_text_box(cmd, FW_INFO_POS, about_str, OPT_CENTER, font_medium);
|
draw_text_box(cmd, FW_INFO_POS, about_str, OPT_CENTER, font_medium);
|
||||||
draw_text_box(cmd, INSET_POS(LICENSE_POS), GET_TEXT_F(MSG_LICENSE), OPT_CENTER, font_tiny);
|
draw_text_box(cmd.tag(3), INSET_POS(LICENSE_POS), GET_TEXT_F(MSG_LICENSE), OPT_CENTER, font_tiny);
|
||||||
|
|
||||||
cmd.font(font_medium)
|
cmd.font(font_medium)
|
||||||
.colors(normal_btn)
|
.colors(normal_btn)
|
||||||
|
@ -74,7 +74,9 @@ void InterfaceSettingsScreen::onRedraw(draw_mode_t what) {
|
|||||||
#define EDGE_R 30
|
#define EDGE_R 30
|
||||||
.font(font_small)
|
.font(font_small)
|
||||||
.tag(0)
|
.tag(0)
|
||||||
|
#if DISABLED(LCD_FYSETC_TFT81050)
|
||||||
.text(BTN_POS(1,2), BTN_SIZE(2,1), GET_TEXT_F(MSG_LCD_BRIGHTNESS), OPT_RIGHTX | OPT_CENTERY)
|
.text(BTN_POS(1,2), BTN_SIZE(2,1), GET_TEXT_F(MSG_LCD_BRIGHTNESS), OPT_RIGHTX | OPT_CENTERY)
|
||||||
|
#endif
|
||||||
.text(BTN_POS(1,3), BTN_SIZE(2,1), GET_TEXT_F(MSG_SOUND_VOLUME), OPT_RIGHTX | OPT_CENTERY)
|
.text(BTN_POS(1,3), BTN_SIZE(2,1), GET_TEXT_F(MSG_SOUND_VOLUME), OPT_RIGHTX | OPT_CENTERY)
|
||||||
.text(BTN_POS(1,4), BTN_SIZE(2,1), GET_TEXT_F(MSG_SCREEN_LOCK), OPT_RIGHTX | OPT_CENTERY);
|
.text(BTN_POS(1,4), BTN_SIZE(2,1), GET_TEXT_F(MSG_SCREEN_LOCK), OPT_RIGHTX | OPT_CENTERY);
|
||||||
#if DISABLED(TOUCH_UI_NO_BOOTSCREEN)
|
#if DISABLED(TOUCH_UI_NO_BOOTSCREEN)
|
||||||
@ -93,7 +95,9 @@ void InterfaceSettingsScreen::onRedraw(draw_mode_t what) {
|
|||||||
cmd.font(font_medium)
|
cmd.font(font_medium)
|
||||||
#define EDGE_R 30
|
#define EDGE_R 30
|
||||||
.colors(ui_slider)
|
.colors(ui_slider)
|
||||||
|
#if DISABLED(LCD_FYSETC_TFT81050)
|
||||||
.tag(2).slider(BTN_POS(3,2), BTN_SIZE(2,1), screen_data.InterfaceSettingsScreen.brightness, 128)
|
.tag(2).slider(BTN_POS(3,2), BTN_SIZE(2,1), screen_data.InterfaceSettingsScreen.brightness, 128)
|
||||||
|
#endif
|
||||||
.tag(3).slider(BTN_POS(3,3), BTN_SIZE(2,1), screen_data.InterfaceSettingsScreen.volume, 0xFF)
|
.tag(3).slider(BTN_POS(3,3), BTN_SIZE(2,1), screen_data.InterfaceSettingsScreen.volume, 0xFF)
|
||||||
.colors(ui_toggle)
|
.colors(ui_toggle)
|
||||||
.tag(4).toggle2(BTN_POS(3,4), BTN_SIZE(w,1), GET_TEXT_F(MSG_NO), GET_TEXT_F(MSG_YES), LockScreen::is_enabled())
|
.tag(4).toggle2(BTN_POS(3,4), BTN_SIZE(w,1), GET_TEXT_F(MSG_NO), GET_TEXT_F(MSG_YES), LockScreen::is_enabled())
|
||||||
|
@ -721,3 +721,47 @@
|
|||||||
#define BTN_ENC 63
|
#define BTN_ENC 63
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
|
||||||
|
|
||||||
|
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_RAMPS.h' for details. Comment out this line to continue."
|
||||||
|
|
||||||
|
/** FYSECT TFT TFT81050 display pinout
|
||||||
|
*
|
||||||
|
* Board Display
|
||||||
|
* _____ _____
|
||||||
|
* (SCK) D52 | 1 2 | D50 (MISO) MISO | 1 2 | SCK
|
||||||
|
* (SD_CS) D53 | 3 4 | D33 (BNT_EN2) (BNT_EN2) MOD_RESET | 3 4 | SD_CS
|
||||||
|
* (MOSI) D51 | 5 6 D31 (BNT_EN1) (BNT_EN1) LCD_CS | 5 6 MOSI
|
||||||
|
* RESET | 7 8 | D49 (SD_DET) SD_DET | 7 8 | RESET
|
||||||
|
* NC | 9 10| GND GND | 9 10| 5V
|
||||||
|
* ----- -----
|
||||||
|
* EXP2 EXP1
|
||||||
|
*
|
||||||
|
* Needs custom cable:
|
||||||
|
*
|
||||||
|
* Board Adapter Display
|
||||||
|
* _________
|
||||||
|
* EXP2-1 ----------- EXP1-10
|
||||||
|
* EXP2-2 ----------- EXP1-9
|
||||||
|
* EXP2-4 ----------- EXP1-8
|
||||||
|
* EXP2-4 ----------- EXP1-7
|
||||||
|
* EXP2-3 ----------- EXP1-6
|
||||||
|
* EXP2-6 ----------- EXP1-5
|
||||||
|
* EXP2-7 ----------- EXP1-4
|
||||||
|
* EXP2-8 ----------- EXP1-3
|
||||||
|
* EXP2-1 ----------- EXP1-2
|
||||||
|
* EXT1-10 ----------- EXP1-1
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define BEEPER_PIN 37
|
||||||
|
|
||||||
|
#define BTN_EN1 31
|
||||||
|
#define LCD_PINS_RS 33
|
||||||
|
|
||||||
|
#define SD_DETECT_PIN 49
|
||||||
|
|
||||||
|
#define KILL_PIN -1
|
||||||
|
|
||||||
|
#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050
|
||||||
|
@ -47,20 +47,20 @@
|
|||||||
//
|
//
|
||||||
// Limit Switches
|
// Limit Switches
|
||||||
//
|
//
|
||||||
#define X_STOP_PIN PC1 // X-STOP
|
#define X_STOP_PIN PC1 // "X-STOP"
|
||||||
#define Y_STOP_PIN PC0 // Y-STOP
|
#define Y_STOP_PIN PC0 // "Y-STOP"
|
||||||
#define Z_STOP_PIN PC15 // Z-STOP
|
#define Z_STOP_PIN PC15 // "Z-STOP"
|
||||||
|
|
||||||
//
|
//
|
||||||
// Z Probe must be this pin
|
// Z Probe must be this pin
|
||||||
//
|
//
|
||||||
#define Z_MIN_PROBE_PIN PC14 // PROBE
|
#define Z_MIN_PROBE_PIN PC14 // "PROBE"
|
||||||
|
|
||||||
//
|
//
|
||||||
// Filament Runout Sensor
|
// Filament Runout Sensor
|
||||||
//
|
//
|
||||||
#ifndef FIL_RUNOUT_PIN
|
#ifndef FIL_RUNOUT_PIN
|
||||||
#define FIL_RUNOUT_PIN PC2 // E0-STOP
|
#define FIL_RUNOUT_PIN PC2 // "E0-STOP"
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
//
|
//
|
||||||
@ -149,9 +149,9 @@
|
|||||||
//
|
//
|
||||||
// Heaters / Fans
|
// Heaters / Fans
|
||||||
//
|
//
|
||||||
#define HEATER_0_PIN PC8 // HE
|
#define HEATER_0_PIN PC8 // "HE"
|
||||||
#define HEATER_BED_PIN PC9 // HB
|
#define HEATER_BED_PIN PC9 // "HB"
|
||||||
#define FAN_PIN PA8 // FAN0
|
#define FAN_PIN PA8 // "FAN0"
|
||||||
|
|
||||||
//
|
//
|
||||||
// USB connect control
|
// USB connect control
|
||||||
@ -159,8 +159,6 @@
|
|||||||
#define USB_CONNECT_PIN PC13
|
#define USB_CONNECT_PIN PC13
|
||||||
#define USB_CONNECT_INVERTING false
|
#define USB_CONNECT_INVERTING false
|
||||||
|
|
||||||
#define SD_DETECT_PIN PC4
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* _____
|
* _____
|
||||||
* 5V | 1 2 | GND
|
* 5V | 1 2 | GND
|
||||||
@ -182,18 +180,31 @@
|
|||||||
#define EXPA1_10_PIN PA15
|
#define EXPA1_10_PIN PA15
|
||||||
|
|
||||||
#if HAS_SPI_LCD
|
#if HAS_SPI_LCD
|
||||||
#define BTN_ENC EXPA1_09_PIN
|
|
||||||
#define BTN_EN1 EXPA1_08_PIN
|
|
||||||
#define BTN_EN2 EXPA1_06_PIN
|
|
||||||
|
|
||||||
#if ENABLED(CR10_STOCKDISPLAY)
|
#if ENABLED(CR10_STOCKDISPLAY)
|
||||||
|
|
||||||
#define BEEPER_PIN EXPA1_10_PIN
|
#define BEEPER_PIN EXPA1_10_PIN
|
||||||
|
|
||||||
|
#define BTN_ENC EXPA1_09_PIN
|
||||||
|
#define BTN_EN1 EXPA1_08_PIN
|
||||||
|
#define BTN_EN2 EXPA1_06_PIN
|
||||||
|
|
||||||
#define LCD_PINS_RS EXPA1_04_PIN
|
#define LCD_PINS_RS EXPA1_04_PIN
|
||||||
#define LCD_PINS_ENABLE EXPA1_03_PIN
|
#define LCD_PINS_ENABLE EXPA1_03_PIN
|
||||||
#define LCD_PINS_D4 EXPA1_05_PIN
|
#define LCD_PINS_D4 EXPA1_05_PIN
|
||||||
|
|
||||||
|
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
|
||||||
|
|
||||||
|
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3.h' for details. Comment out this line to continue."
|
||||||
|
|
||||||
|
#define LCD_PINS_RS EXPA1_05_PIN
|
||||||
|
#define LCD_PINS_ENABLE EXPA1_09_PIN
|
||||||
|
#define LCD_PINS_D4 EXPA1_04_PIN
|
||||||
|
#define LCD_PINS_D5 EXPA1_06_PIN
|
||||||
|
#define LCD_PINS_D6 EXPA1_08_PIN
|
||||||
|
#define LCD_PINS_D7 EXPA1_10_PIN
|
||||||
|
#define ADC_KEYPAD_PIN PA1 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD!
|
||||||
|
|
||||||
#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
|
#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
|
||||||
|
|
||||||
/** Creality Ender-2 display pinout
|
/** Creality Ender-2 display pinout
|
||||||
@ -207,6 +218,10 @@
|
|||||||
* EXP1
|
* EXP1
|
||||||
*/
|
*/
|
||||||
|
|
||||||
|
#define BTN_ENC EXPA1_09_PIN
|
||||||
|
#define BTN_EN1 EXPA1_08_PIN
|
||||||
|
#define BTN_EN2 EXPA1_06_PIN
|
||||||
|
|
||||||
#define DOGLCD_CS EXPA1_04_PIN
|
#define DOGLCD_CS EXPA1_04_PIN
|
||||||
#define DOGLCD_A0 EXPA1_05_PIN
|
#define DOGLCD_A0 EXPA1_05_PIN
|
||||||
#define DOGLCD_SCK EXPA1_10_PIN
|
#define DOGLCD_SCK EXPA1_10_PIN
|
||||||
@ -215,17 +230,71 @@
|
|||||||
#define LCD_BACKLIGHT_PIN -1
|
#define LCD_BACKLIGHT_PIN -1
|
||||||
|
|
||||||
#else
|
#else
|
||||||
#error "Only CR10_STOCKDISPLAY, ENDER2_STOCKDISPLAY, and MKS_MINI_12864 are currently supported on the BIGTREE_SKR_E3_DIP."
|
#error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, and MKS_MINI_12864 are currently supported on the BIGTREE_SKR_E3_DIP."
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#endif // HAS_SPI_LCD
|
#endif // HAS_SPI_LCD
|
||||||
|
|
||||||
|
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
|
||||||
|
|
||||||
|
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_E3_DIP.h' for details. Comment out this line to continue."
|
||||||
|
|
||||||
|
/** FYSECT TFT TFT81050 display pinout
|
||||||
|
*
|
||||||
|
* Board Display
|
||||||
|
* _____ _____
|
||||||
|
* 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK)
|
||||||
|
* (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) MOD_RESET | 3 4 | SD_CS (PA10)
|
||||||
|
* (FREE) PB9 | 5 6 PA10 (SD_CS) (PB8) LCD_CS | 5 6 MOSI (SPI1-MOSI)
|
||||||
|
* RESET | 7 8 | PA9 (MOD_RESET) (PA15) SD_DET | 7 8 | RESET
|
||||||
|
* (BEEPER) PB6 | 9 10| PA15 (SD_DET) GND | 9 10| 5V
|
||||||
|
* ----- -----
|
||||||
|
* EXP1 EXP1
|
||||||
|
*
|
||||||
|
* Needs custom cable:
|
||||||
|
*
|
||||||
|
* Board Adapter Display
|
||||||
|
* _________
|
||||||
|
* EXP1-1 ----------- EXP1-10
|
||||||
|
* EXP1-2 ----------- EXP1-9
|
||||||
|
* SPI1-4 ----------- EXP1-6
|
||||||
|
* EXP1-4 ----------- EXP1-5
|
||||||
|
* SP11-3 ----------- EXP1-2
|
||||||
|
* EXP1-6 ----------- EXP1-4
|
||||||
|
* EXP1-7 ----------- EXP1-8
|
||||||
|
* EXP1-8 ----------- EXP1-3
|
||||||
|
* SPI1-1 ----------- EXP1-1
|
||||||
|
* EXT1-10 ----------- EXP1-4
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define CLCD_SPI_BUS 1 // SPI1 connector
|
||||||
|
|
||||||
|
#define BEEPER_PIN EXPA1_09_PIN
|
||||||
|
|
||||||
|
#define BTN_EN1 EXPA1_08_PIN
|
||||||
|
#define LCD_PINS_RS EXPA1_04_PIN
|
||||||
|
|
||||||
|
#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050
|
||||||
|
|
||||||
//
|
//
|
||||||
// SD Support
|
// SD Support
|
||||||
//
|
//
|
||||||
|
|
||||||
#ifndef SDCARD_CONNECTION
|
#ifndef SDCARD_CONNECTION
|
||||||
#define SDCARD_CONNECTION ONBOARD
|
#define SDCARD_CONNECTION ONBOARD
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define ON_BOARD_SPI_DEVICE 1 //SPI1
|
#if SD_CONNECTION_IS(ONBOARD)
|
||||||
|
#define SD_DETECT_PIN PC4
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) && SD_CONNECTION_IS(LCD)
|
||||||
|
#define SD_DETECT_PIN EXPA1_10_PIN
|
||||||
|
#define SS_PIN EXPA1_06_PIN
|
||||||
|
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
|
||||||
|
#error "SD CUSTOM_CABLE is not compatible with SKR E3 DIP."
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define ON_BOARD_SPI_DEVICE 1 // SPI1
|
||||||
#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card
|
#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card
|
||||||
|
@ -40,19 +40,19 @@
|
|||||||
//
|
//
|
||||||
// Servos
|
// Servos
|
||||||
//
|
//
|
||||||
#define SERVO0_PIN PA1
|
#define SERVO0_PIN PA1 // "SERVOS"
|
||||||
|
|
||||||
//
|
//
|
||||||
// Limit Switches
|
// Limit Switches
|
||||||
//
|
//
|
||||||
#define X_STOP_PIN PC0
|
#define X_STOP_PIN PC0 // "X-STOP"
|
||||||
#define Y_STOP_PIN PC1
|
#define Y_STOP_PIN PC1 // "Y-STOP"
|
||||||
#define Z_STOP_PIN PC2
|
#define Z_STOP_PIN PC2 // "Z-STOP"
|
||||||
|
|
||||||
//
|
//
|
||||||
// Z Probe must be this pins
|
// Z Probe must be this pin
|
||||||
//
|
//
|
||||||
#define Z_MIN_PROBE_PIN PC14
|
#define Z_MIN_PROBE_PIN PC14 // "PROBE"
|
||||||
|
|
||||||
//
|
//
|
||||||
// Filament Runout Sensor
|
// Filament Runout Sensor
|
||||||
@ -83,15 +83,15 @@
|
|||||||
//
|
//
|
||||||
// Temperature Sensors
|
// Temperature Sensors
|
||||||
//
|
//
|
||||||
#define TEMP_0_PIN PA0 // Analog Input
|
#define TEMP_0_PIN PA0 // Analog Input "TH0"
|
||||||
#define TEMP_BED_PIN PC3 // Analog Input
|
#define TEMP_BED_PIN PC3 // Analog Input "TB0"
|
||||||
|
|
||||||
//
|
//
|
||||||
// Heaters / Fans
|
// Heaters / Fans
|
||||||
//
|
//
|
||||||
#define HEATER_0_PIN PC8 // EXTRUDER
|
#define HEATER_0_PIN PC8 // "HE"
|
||||||
#define HEATER_BED_PIN PC9 // BED
|
#define HEATER_BED_PIN PC9 // "HB"
|
||||||
#define FAN_PIN PA8
|
#define FAN_PIN PA8 // "FAN0"
|
||||||
|
|
||||||
//
|
//
|
||||||
// USB connect control
|
// USB connect control
|
||||||
@ -99,8 +99,6 @@
|
|||||||
#define USB_CONNECT_PIN PC13
|
#define USB_CONNECT_PIN PC13
|
||||||
#define USB_CONNECT_INVERTING false
|
#define USB_CONNECT_INVERTING false
|
||||||
|
|
||||||
#define SD_DETECT_PIN PC4
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* _____
|
* _____
|
||||||
* 5V | 1 2 | GND
|
* 5V | 1 2 | GND
|
||||||
@ -127,9 +125,9 @@
|
|||||||
|
|
||||||
#define BEEPER_PIN EXPA1_10_PIN
|
#define BEEPER_PIN EXPA1_10_PIN
|
||||||
|
|
||||||
|
#define BTN_ENC EXPA1_09_PIN
|
||||||
#define BTN_EN1 EXPA1_08_PIN
|
#define BTN_EN1 EXPA1_08_PIN
|
||||||
#define BTN_EN2 EXPA1_06_PIN
|
#define BTN_EN2 EXPA1_06_PIN
|
||||||
#define BTN_ENC EXPA1_09_PIN
|
|
||||||
|
|
||||||
#define LCD_PINS_RS EXPA1_04_PIN
|
#define LCD_PINS_RS EXPA1_04_PIN
|
||||||
#define LCD_PINS_ENABLE EXPA1_03_PIN
|
#define LCD_PINS_ENABLE EXPA1_03_PIN
|
||||||
@ -159,9 +157,10 @@
|
|||||||
* -----
|
* -----
|
||||||
* EXP1
|
* EXP1
|
||||||
*/
|
*/
|
||||||
|
|
||||||
|
#define BTN_ENC EXPA1_09_PIN
|
||||||
#define BTN_EN1 EXPA1_08_PIN
|
#define BTN_EN1 EXPA1_08_PIN
|
||||||
#define BTN_EN2 EXPA1_06_PIN
|
#define BTN_EN2 EXPA1_06_PIN
|
||||||
#define BTN_ENC EXPA1_09_PIN
|
|
||||||
|
|
||||||
#define DOGLCD_CS EXPA1_04_PIN
|
#define DOGLCD_CS EXPA1_04_PIN
|
||||||
#define DOGLCD_A0 EXPA1_05_PIN
|
#define DOGLCD_A0 EXPA1_05_PIN
|
||||||
@ -171,19 +170,73 @@
|
|||||||
#define LCD_BACKLIGHT_PIN -1
|
#define LCD_BACKLIGHT_PIN -1
|
||||||
|
|
||||||
#else
|
#else
|
||||||
|
#error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, and MKS_MINI_12864 are currently supported on the BIGTREE_SKR_MINI_E3."
|
||||||
#error "Only ZONESTAR_LCD, MKS_MINI_12864, ENDER2_STOCKDISPLAY, and CR10_STOCKDISPLAY are currently supported on the BIGTREE_SKR_MINI_E3."
|
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#endif // HAS_SPI_LCD
|
#endif // HAS_SPI_LCD
|
||||||
|
|
||||||
|
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
|
||||||
|
|
||||||
|
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_MINI_E3.h' for details. Comment out this line to continue."
|
||||||
|
|
||||||
|
/** FYSECT TFT TFT81050 display pinout
|
||||||
|
*
|
||||||
|
* Board Display
|
||||||
|
* _____ _____
|
||||||
|
* 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK)
|
||||||
|
* (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) MOD_RESET | 3 4 | SD_CS (PA10)
|
||||||
|
* (FREE) PB9 | 5 6 PA10 (SD_CS) (PB8) LCD_CS | 5 6 MOSI (SPI1-MOSI)
|
||||||
|
* RESET | 7 8 | PA9 (MOD_RESET) (PB5) SD_DET | 7 8 | RESET
|
||||||
|
* (BEEPER) PB6 | 9 10| PB5 (SD_DET) GND | 9 10| 5V
|
||||||
|
* ----- -----
|
||||||
|
* EXP1 EXP1
|
||||||
|
*
|
||||||
|
* Needs custom cable:
|
||||||
|
*
|
||||||
|
* Board Adapter Display
|
||||||
|
* _________
|
||||||
|
* EXP1-1 ----------- EXP1-10
|
||||||
|
* EXP1-2 ----------- EXP1-9
|
||||||
|
* SPI1-4 ----------- EXP1-6
|
||||||
|
* EXP1-4 ----------- EXP1-5
|
||||||
|
* SPI1-3 ----------- EXP1-2
|
||||||
|
* EXP1-6 ----------- EXP1-4
|
||||||
|
* EXP1-7 ----------- EXP1-8
|
||||||
|
* EXP1-8 ----------- EXP1-3
|
||||||
|
* SPI1-1 ----------- EXP1-1
|
||||||
|
* EXP1-10 ----------- EXP1-4
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define CLCD_SPI_BUS 1 // SPI1 connector
|
||||||
|
|
||||||
|
#define BEEPER_PIN EXPA1_09_PIN
|
||||||
|
|
||||||
|
#define BTN_EN1 EXPA1_08_PIN
|
||||||
|
#define LCD_PINS_RS EXPA1_04_PIN
|
||||||
|
#define LCD_PINS_ENABLE EXPA1_03_PIN
|
||||||
|
#define LCD_PINS_D4 EXPA1_05_PIN
|
||||||
|
|
||||||
|
#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050
|
||||||
|
|
||||||
//
|
//
|
||||||
// SD Support
|
// SD Support
|
||||||
//
|
//
|
||||||
|
|
||||||
#ifndef SDCARD_CONNECTION
|
#ifndef SDCARD_CONNECTION
|
||||||
#define SDCARD_CONNECTION ONBOARD
|
#define SDCARD_CONNECTION ONBOARD
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if SD_CONNECTION_IS(ONBOARD)
|
||||||
|
#define SD_DETECT_PIN PC4
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) && SD_CONNECTION_IS(LCD)
|
||||||
|
#define SD_DETECT_PIN EXPA1_10_PIN
|
||||||
|
#define SS_PIN EXPA1_06_PIN
|
||||||
|
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
|
||||||
|
#error "SD CUSTOM_CABLE is not compatible with SKR Mini E3."
|
||||||
|
#endif
|
||||||
|
|
||||||
#define ON_BOARD_SPI_DEVICE 1 // SPI1
|
#define ON_BOARD_SPI_DEVICE 1 // SPI1
|
||||||
#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card
|
#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card
|
||||||
|
Loading…
Reference in New Issue
Block a user