Implementation changes to support 5 extruders

This commit is contained in:
Scott Lahteine 2017-04-06 16:46:52 -05:00
parent 04050237f0
commit 832064e4f2
6 changed files with 389 additions and 259 deletions

View File

@ -10707,9 +10707,12 @@ void prepare_move_to_destination() {
|| E2_ENABLE_READ == E_ENABLE_ON
#if E_STEPPERS > 3
|| E3_ENABLE_READ == E_ENABLE_ON
#endif
#endif
#endif
#if E_STEPPERS > 4
|| E4_ENABLE_READ == E_ENABLE_ON
#endif // E_STEPPERS > 4
#endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2
#endif // E_STEPPERS > 1
) {
lastMotorOn = ms; //... set time to NOW so the fan will turn on
}
@ -10930,6 +10933,7 @@ void enable_all_steppers() {
enable_e1();
enable_e2();
enable_e3();
enable_e4();
}
void disable_e_steppers() {
@ -10937,6 +10941,7 @@ void disable_e_steppers() {
disable_e1();
disable_e2();
disable_e3();
disable_e4();
}
void disable_all_steppers() {
@ -11135,9 +11140,15 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
oldstatus = E3_ENABLE_READ;
enable_e3();
break;
#endif
#endif
#endif
#if E_STEPPERS > 4
case 4:
oldstatus = E4_ENABLE_READ;
enable_e4();
break;
#endif // E_STEPPERS > 4
#endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2
#endif // E_STEPPERS > 1
}
#endif // !SWITCHING_EXTRUDER
@ -11168,9 +11179,14 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
case 3:
E3_ENABLE_WRITE(oldstatus);
break;
#endif
#endif
#endif
#if E_STEPPERS > 4
case 4:
E4_ENABLE_WRITE(oldstatus);
break;
#endif // E_STEPPERS > 4
#endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2
#endif // E_STEPPERS > 1
}
#endif // !SWITCHING_EXTRUDER
}

View File

@ -36,7 +36,7 @@
*
*/
#define EEPROM_VERSION "V31"
#define EEPROM_VERSION "V32"
// Change EEPROM version if these are changed:
#define EEPROM_OFFSET 100
@ -48,9 +48,9 @@
* 104 EEPROM Checksum (uint16_t)
*
* 106 E_STEPPERS (uint8_t)
* 107 M92 XYZE planner.axis_steps_per_mm (float x4 ... x7)
* 123 M203 XYZE planner.max_feedrate_mm_s (float x4 ... x7)
* 139 M201 XYZE planner.max_acceleration_mm_per_s2 (uint32_t x4 ... x7)
* 107 M92 XYZE planner.axis_steps_per_mm (float x4 ... x8)
* 123 M203 XYZE planner.max_feedrate_mm_s (float x4 ... x8)
* 139 M201 XYZE planner.max_acceleration_mm_per_s2 (uint32_t x4 ... x8)
* 155 M204 P planner.acceleration (float)
* 159 M204 R planner.retract_acceleration (float)
* 163 M204 T planner.travel_acceleration (float)
@ -64,14 +64,14 @@
* 195 M206 XYZ home_offset (float x3)
* 207 M218 XYZ hotend_offset (float x3 per additional hotend)
*
* Mesh bed leveling:
* Mesh bed leveling: 43 bytes
* 219 M420 S from mbl.status (bool)
* 220 mbl.z_offset (float)
* 224 GRID_MAX_POINTS_X (uint8 as set in firmware)
* 225 GRID_MAX_POINTS_Y (uint8 as set in firmware)
* 226 G29 S3 XYZ z_values[][] (float x9, by default, up to float x 81) +288
* 224 GRID_MAX_POINTS_X (uint8_t)
* 225 GRID_MAX_POINTS_Y (uint8_t)
* 226 G29 S3 XYZ z_values[][] (float x9, up to float x 81) +288
*
* AUTO BED LEVELING
* AUTO BED LEVELING 4 bytes
* 262 M851 zprobe_zoffset (float)
*
* ABL_PLANAR (or placeholder): 36 bytes
@ -80,7 +80,7 @@
* AUTO_BED_LEVELING_BILINEAR (or placeholder): 47 bytes
* 302 GRID_MAX_POINTS_X (uint8_t)
* 303 GRID_MAX_POINTS_Y (uint8_t)
* 304 bilinear_grid_spacing (int x2) from G29: (B-F)/X, (R-L)/Y
* 304 bilinear_grid_spacing (int x2)
* 308 G29 L F bilinear_start (int x2)
* 312 bed_level_grid[][] (float x9, up to float x256) +988
*
@ -110,42 +110,43 @@
* 424 M301 E1 PIDC Kp[1], Ki[1], Kd[1], Kc[1] (float x4)
* 440 M301 E2 PIDC Kp[2], Ki[2], Kd[2], Kc[2] (float x4)
* 456 M301 E3 PIDC Kp[3], Ki[3], Kd[3], Kc[3] (float x4)
* 472 M301 L lpq_len (int)
* 472 M301 E4 PIDC Kp[3], Ki[3], Kd[3], Kc[3] (float x4)
* 488 M301 L lpq_len (int)
*
* PIDTEMPBED: 12 bytes
* 474 M304 PID thermalManager.bedKp, .bedKi, .bedKd (float x3)
* 490 M304 PID thermalManager.bedKp, .bedKi, .bedKd (float x3)
*
* DOGLCD: 2 bytes
* 486 M250 C lcd_contrast (int)
* 502 M250 C lcd_contrast (int)
*
* FWRETRACT: 29 bytes
* 488 M209 S autoretract_enabled (bool)
* 489 M207 S retract_length (float)
* 493 M207 W retract_length_swap (float)
* 497 M207 F retract_feedrate_mm_s (float)
* 501 M207 Z retract_zlift (float)
* 505 M208 S retract_recover_length (float)
* 509 M208 W retract_recover_length_swap (float)
* 513 M208 F retract_recover_feedrate_mm_s (float)
* 504 M209 S autoretract_enabled (bool)
* 505 M207 S retract_length (float)
* 509 M207 W retract_length_swap (float)
* 513 M207 F retract_feedrate_mm_s (float)
* 517 M207 Z retract_zlift (float)
* 521 M208 S retract_recover_length (float)
* 525 M208 W retract_recover_length_swap (float)
* 529 M208 F retract_recover_feedrate_mm_s (float)
*
* Volumetric Extrusion: 17 bytes
* 517 M200 D volumetric_enabled (bool)
* 518 M200 T D filament_size (float x4) (T0..3)
* Volumetric Extrusion: 21 bytes
* 533 M200 D volumetric_enabled (bool)
* 534 M200 T D filament_size (float x5) (T0..3)
*
* TMC2130 Stepper Current: 20 bytes
* 534 M906 X stepperX current (uint16_t)
* 536 M906 Y stepperY current (uint16_t)
* 538 M906 Z stepperZ current (uint16_t)
* 540 M906 X2 stepperX2 current (uint16_t)
* 542 M906 Y2 stepperY2 current (uint16_t)
* 544 M906 Z2 stepperZ2 current (uint16_t)
* 546 M906 E0 stepperE0 current (uint16_t)
* 548 M906 E1 stepperE1 current (uint16_t)
* 550 M906 E2 stepperE2 current (uint16_t)
* 552 M906 E3 stepperE3 current (uint16_t)
* 554 M906 X stepperX current (uint16_t)
* 556 M906 Y stepperY current (uint16_t)
* 558 M906 Z stepperZ current (uint16_t)
* 560 M906 X2 stepperX2 current (uint16_t)
* 562 M906 Y2 stepperY2 current (uint16_t)
* 564 M906 Z2 stepperZ2 current (uint16_t)
* 566 M906 E0 stepperE0 current (uint16_t)
* 568 M906 E1 stepperE1 current (uint16_t)
* 570 M906 E2 stepperE2 current (uint16_t)
* 572 M906 E3 stepperE3 current (uint16_t)
*
* 554 Minimum end-point
* 1875 (554 + 36 + 9 + 288 + 988) Maximum end-point
* 574 Minimum end-point
* 1895 (574 + 36 + 9 + 288 + 988) Maximum end-point
*
*/
#include "Marlin.h"
@ -1433,9 +1434,14 @@ void Config_ResetDefault() {
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M200 T3 D", filament_size[3]);
SERIAL_EOL;
#endif
#endif
#endif
#if EXTRUDERS > 4
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M200 T4 D", filament_size[4]);
SERIAL_EOL;
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1
if (!volumetric_enabled) {
CONFIG_ECHO_START;

View File

@ -882,9 +882,12 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
if (g_uc_extruder_last_move[2] == 0) disable_e2();
#if EXTRUDERS > 3
if (g_uc_extruder_last_move[3] == 0) disable_e3();
#endif
#endif
#endif
#if EXTRUDERS > 4
if (g_uc_extruder_last_move[4] == 0) disable_e4();
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1
break;
#if EXTRUDERS > 1
case 1:
@ -895,8 +898,11 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
if (g_uc_extruder_last_move[2] == 0) disable_e2();
#if EXTRUDERS > 3
if (g_uc_extruder_last_move[3] == 0) disable_e3();
#endif
#endif
#if EXTRUDERS > 4
if (g_uc_extruder_last_move[4] == 0) disable_e4();
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
break;
#if EXTRUDERS > 2
case 2:
@ -906,6 +912,9 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
if (g_uc_extruder_last_move[1] == 0) disable_e1();
#if EXTRUDERS > 3
if (g_uc_extruder_last_move[3] == 0) disable_e3();
#if EXTRUDERS > 4
if (g_uc_extruder_last_move[4] == 0) disable_e4();
#endif
#endif
break;
#if EXTRUDERS > 3
@ -915,7 +924,20 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
if (g_uc_extruder_last_move[0] == 0) disable_e0();
if (g_uc_extruder_last_move[1] == 0) disable_e1();
if (g_uc_extruder_last_move[2] == 0) disable_e2();
#if EXTRUDERS > 4
if (g_uc_extruder_last_move[4] == 0) disable_e4();
#endif
break;
#if EXTRUDERS > 4
case 4:
enable_e4();
g_uc_extruder_last_move[4] = (BLOCK_BUFFER_SIZE) * 2;
if (g_uc_extruder_last_move[0] == 0) disable_e0();
if (g_uc_extruder_last_move[1] == 0) disable_e1();
if (g_uc_extruder_last_move[2] == 0) disable_e2();
if (g_uc_extruder_last_move[3] == 0) disable_e3();
break;
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1
@ -925,6 +947,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
enable_e1();
enable_e2();
enable_e3();
enable_e4();
#endif
}

View File

@ -51,8 +51,8 @@
static void* heater_ttbl_map[2] = {(void*)HEATER_0_TEMPTABLE, (void*)HEATER_1_TEMPTABLE };
static uint8_t heater_ttbllen_map[2] = { HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN };
#else
static void* heater_ttbl_map[HOTENDS] = ARRAY_BY_HOTENDS((void*)HEATER_0_TEMPTABLE, (void*)HEATER_1_TEMPTABLE, (void*)HEATER_2_TEMPTABLE, (void*)HEATER_3_TEMPTABLE);
static uint8_t heater_ttbllen_map[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN, HEATER_2_TEMPTABLE_LEN, HEATER_3_TEMPTABLE_LEN);
static void* heater_ttbl_map[HOTENDS] = ARRAY_BY_HOTENDS((void*)HEATER_0_TEMPTABLE, (void*)HEATER_1_TEMPTABLE, (void*)HEATER_2_TEMPTABLE, (void*)HEATER_3_TEMPTABLE, (void*)HEATER_4_TEMPTABLE);
static uint8_t heater_ttbllen_map[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN, HEATER_2_TEMPTABLE_LEN, HEATER_3_TEMPTABLE_LEN, HEATER_4_TEMPTABLE_LEN);
#endif
Temperature thermalManager;
@ -161,8 +161,8 @@ unsigned long Temperature::raw_temp_value[MAX_EXTRUDERS] = { 0 };
unsigned long Temperature::raw_temp_bed_value = 0;
// Init min and max temp with extreme values to prevent false errors during startup
int Temperature::minttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_RAW_LO_TEMP , HEATER_1_RAW_LO_TEMP , HEATER_2_RAW_LO_TEMP, HEATER_3_RAW_LO_TEMP),
Temperature::maxttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_RAW_HI_TEMP , HEATER_1_RAW_HI_TEMP , HEATER_2_RAW_HI_TEMP, HEATER_3_RAW_HI_TEMP),
int Temperature::minttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_RAW_LO_TEMP , HEATER_1_RAW_LO_TEMP , HEATER_2_RAW_LO_TEMP, HEATER_3_RAW_LO_TEMP, HEATER_4_RAW_LO_TEMP),
Temperature::maxttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_RAW_HI_TEMP , HEATER_1_RAW_HI_TEMP , HEATER_2_RAW_HI_TEMP, HEATER_3_RAW_HI_TEMP, HEATER_4_RAW_HI_TEMP),
Temperature::minttemp[HOTENDS] = { 0 },
Temperature::maxttemp[HOTENDS] = ARRAY_BY_HOTENDS1(16383);
@ -460,12 +460,13 @@ int Temperature::getHeaterPower(int heater) {
#if HAS_AUTO_FAN
void Temperature::checkExtruderAutoFans() {
const int8_t fanPin[] = { E0_AUTO_FAN_PIN, E1_AUTO_FAN_PIN, E2_AUTO_FAN_PIN, E3_AUTO_FAN_PIN };
const int fanBit[] = {
constexpr int8_t fanPin[] = { E0_AUTO_FAN_PIN, E1_AUTO_FAN_PIN, E2_AUTO_FAN_PIN, E3_AUTO_FAN_PIN, E4_AUTO_FAN_PIN };
constexpr int fanBit[] = {
0,
AUTO_1_IS_0 ? 0 : 1,
AUTO_2_IS_0 ? 0 : AUTO_2_IS_1 ? 1 : 2,
AUTO_3_IS_0 ? 0 : AUTO_3_IS_1 ? 1 : AUTO_3_IS_2 ? 2 : 3
AUTO_3_IS_0 ? 0 : AUTO_3_IS_1 ? 1 : AUTO_3_IS_2 ? 2 : 3,
AUTO_4_IS_0 ? 0 : AUTO_4_IS_1 ? 1 : AUTO_4_IS_2 ? 2 : AUTO_4_IS_3 ? 3 : 4
};
uint8_t fanState = 0;
@ -973,6 +974,9 @@ void Temperature::init() {
#if HAS_HEATER_3
SET_OUTPUT(HEATER_3_PIN);
#endif
#if HAS_HEATER_4
SET_OUTPUT(HEATER_3_PIN);
#endif
#if HAS_HEATER_BED
SET_OUTPUT(HEATER_BED_PIN);
#endif
@ -1033,6 +1037,9 @@ void Temperature::init() {
#if HAS_TEMP_3
ANALOG_SELECT(TEMP_3_PIN);
#endif
#if HAS_TEMP_4
ANALOG_SELECT(TEMP_4_PIN);
#endif
#if HAS_TEMP_BED
ANALOG_SELECT(TEMP_BED_PIN);
#endif
@ -1080,6 +1087,16 @@ void Temperature::init() {
SET_OUTPUT(E3_AUTO_FAN_PIN);
#endif
#endif
#if HAS_AUTO_FAN_4 && !AUTO_4_IS_0 && !AUTO_4_IS_1 && !AUTO_4_IS_2 && !AUTO_4_IS_3
#if E4_AUTO_FAN_PIN == FAN1_PIN
SET_OUTPUT(E4_AUTO_FAN_PIN);
#if ENABLED(FAST_PWM_FAN)
setPwmFrequency(E4_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
#endif
#else
SET_OUTPUT(E4_AUTO_FAN_PIN);
#endif
#endif
// Use timer0 for temperature measurement
// Interleave temperature interrupt with millies interrupt
@ -1133,6 +1150,14 @@ void Temperature::init() {
#ifdef HEATER_3_MAXTEMP
TEMP_MAX_ROUTINE(3);
#endif
#if HOTENDS > 4
#ifdef HEATER_4_MINTEMP
TEMP_MIN_ROUTINE(4);
#endif
#ifdef HEATER_4_MAXTEMP
TEMP_MAX_ROUTINE(4);
#endif
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
@ -1264,18 +1289,18 @@ void Temperature::disable_all_heaters() {
#if HAS_TEMP_HOTEND
DISABLE_HEATER(0);
#endif
#if HOTENDS > 1 && HAS_TEMP_1
#if HOTENDS > 1
DISABLE_HEATER(1);
#endif
#if HOTENDS > 2 && HAS_TEMP_2
#if HOTENDS > 2
DISABLE_HEATER(2);
#endif
#if HOTENDS > 3 && HAS_TEMP_3
#if HOTENDS > 3
DISABLE_HEATER(3);
#if HOTENDS > 4
DISABLE_HEATER(4);
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#endif
#if HAS_TEMP_BED
@ -1384,6 +1409,9 @@ void Temperature::set_current_temp_raw() {
current_temperature_raw[2] = raw_temp_value[2];
#if HAS_TEMP_3
current_temperature_raw[3] = raw_temp_value[3];
#if HAS_TEMP_4
current_temperature_raw[4] = raw_temp_value[4];
#endif
#endif
#endif
#endif
@ -1525,9 +1553,12 @@ void Temperature::isr() {
ISR_STATICS(2);
#if HOTENDS > 3
ISR_STATICS(3);
#endif
#endif
#endif
#if HOTENDS > 4
ISR_STATICS(4);
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#if HAS_HEATER_BED
ISR_STATICS(BED);
#endif
@ -1561,9 +1592,13 @@ void Temperature::isr() {
#if HOTENDS > 3
soft_pwm_3 = (soft_pwm_3 & pwm_mask) + soft_pwm[3];
WRITE_HEATER_3(soft_pwm_3 > pwm_mask ? HIGH : LOW);
#endif
#endif
#endif
#if HOTENDS > 4
soft_pwm_4 = (soft_pwm_4 & pwm_mask) + soft_pwm[4];
WRITE_HEATER_4(soft_pwm_4 > pwm_mask ? HIGH : LOW);
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#if HAS_HEATER_BED
soft_pwm_BED = (soft_pwm_BED & pwm_mask) + soft_pwm_bed;
@ -1589,13 +1624,16 @@ void Temperature::isr() {
if (soft_pwm_0 <= pwm_count_tmp) WRITE_HEATER_0(0);
#if HOTENDS > 1
if (soft_pwm_1 <= pwm_count_tmp) WRITE_HEATER_1(0);
#endif
#if HOTENDS > 2
if (soft_pwm_2 <= pwm_count_tmp) WRITE_HEATER_2(0);
#endif
#if HOTENDS > 3
if (soft_pwm_3 <= pwm_count_tmp) WRITE_HEATER_3(0);
#endif
#if HOTENDS > 4
if (soft_pwm_4 <= pwm_count_tmp) WRITE_HEATER_4(0);
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#if HAS_HEATER_BED
if (soft_pwm_BED <= pwm_count_tmp) WRITE_HEATER_BED(0);
@ -1665,32 +1703,38 @@ void Temperature::isr() {
if (slow_pwm_count == 0) {
SLOW_PWM_ROUTINE(0); // EXTRUDER 0
SLOW_PWM_ROUTINE(0);
#if HOTENDS > 1
SLOW_PWM_ROUTINE(1); // EXTRUDER 1
SLOW_PWM_ROUTINE(1);
#if HOTENDS > 2
SLOW_PWM_ROUTINE(2); // EXTRUDER 2
SLOW_PWM_ROUTINE(2);
#if HOTENDS > 3
SLOW_PWM_ROUTINE(3); // EXTRUDER 3
#endif
#endif
#endif
SLOW_PWM_ROUTINE(3);
#if HOTENDS > 4
SLOW_PWM_ROUTINE(4);
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#if HAS_HEATER_BED
_SLOW_PWM_ROUTINE(BED, soft_pwm_bed); // BED
#endif
} // slow_pwm_count == 0
PWM_OFF_ROUTINE(0); // EXTRUDER 0
PWM_OFF_ROUTINE(0);
#if HOTENDS > 1
PWM_OFF_ROUTINE(1); // EXTRUDER 1
PWM_OFF_ROUTINE(1);
#if HOTENDS > 2
PWM_OFF_ROUTINE(2); // EXTRUDER 2
PWM_OFF_ROUTINE(2);
#if HOTENDS > 3
PWM_OFF_ROUTINE(3); // EXTRUDER 3
#endif
#endif
#endif
PWM_OFF_ROUTINE(3);
#if HOTENDS > 4
PWM_OFF_ROUTINE(4);
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#if HAS_HEATER_BED
PWM_OFF_ROUTINE(BED); // BED
#endif
@ -1738,17 +1782,19 @@ void Temperature::isr() {
slow_pwm_count++;
slow_pwm_count &= 0x7F;
// EXTRUDER 0
if (state_timer_heater_0 > 0) state_timer_heater_0--;
#if HOTENDS > 1 // EXTRUDER 1
#if HOTENDS > 1
if (state_timer_heater_1 > 0) state_timer_heater_1--;
#if HOTENDS > 2 // EXTRUDER 2
#if HOTENDS > 2
if (state_timer_heater_2 > 0) state_timer_heater_2--;
#if HOTENDS > 3 // EXTRUDER 3
#if HOTENDS > 3
if (state_timer_heater_3 > 0) state_timer_heater_3--;
#endif
#endif
#endif
#if HOTENDS > 4
if (state_timer_heater_4 > 0) state_timer_heater_4--;
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#if HAS_HEATER_BED
if (state_timer_heater_BED > 0) state_timer_heater_BED--;
#endif
@ -1763,7 +1809,7 @@ void Temperature::isr() {
#define START_ADC(pin) ADCSRB = 0; SET_ADMUX_ADCSRA(pin)
#endif
// Prepare or measure a sensor, each one every 12th frame
// Prepare or measure a sensor, each one every 14th frame
switch (temp_state) {
case PrepareTemp_0:
#if HAS_TEMP_0
@ -1832,6 +1878,20 @@ void Temperature::isr() {
#if HAS_TEMP_3
raw_temp_value[3] += ADC;
#endif
temp_state = PrepareTemp_4;
break;
case PrepareTemp_4:
#if HAS_TEMP_4
START_ADC(TEMP_4_PIN);
#endif
lcd_buttons_update();
temp_state = MeasureTemp_4;
break;
case MeasureTemp_4:
#if HAS_TEMP_4
raw_temp_value[4] += ADC;
#endif
temp_state = Prepare_FILWIDTH;
break;
@ -1879,35 +1939,26 @@ void Temperature::isr() {
ZERO(raw_temp_value);
raw_temp_bed_value = 0;
#define TEMPDIR(N) ((HEATER_##N##_RAW_LO_TEMP) > (HEATER_##N##_RAW_HI_TEMP) ? -1 : 1)
int constexpr temp_dir[] = {
#if ENABLED(HEATER_0_USES_MAX6675)
0
#elif HEATER_0_RAW_LO_TEMP > HEATER_0_RAW_HI_TEMP
-1
#else
1
#endif
#if HAS_TEMP_1 && HOTENDS > 1
#if HEATER_1_RAW_LO_TEMP > HEATER_1_RAW_HI_TEMP
, -1
#else
, 1
#endif
#endif
#if HAS_TEMP_2 && HOTENDS > 2
#if HEATER_2_RAW_LO_TEMP > HEATER_2_RAW_HI_TEMP
, -1
#else
, 1
#endif
#endif
#if HAS_TEMP_3 && HOTENDS > 3
#if HEATER_3_RAW_LO_TEMP > HEATER_3_RAW_HI_TEMP
, -1
#else
, 1
#endif
TEMPDIR(0)
#endif
#if HOTENDS > 1
, TEMPDIR(1)
#if HOTENDS > 2
, TEMPDIR(2)
#if HOTENDS > 3
, TEMPDIR(3)
#if HOTENDS > 4
, TEMPDIR(4)
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
};
for (uint8_t e = 0; e < COUNT(temp_dir); e++) {

View File

@ -174,7 +174,7 @@ class Temperature {
static millis_t next_bed_check_ms;
#endif
static unsigned long raw_temp_value[4],
static unsigned long raw_temp_value[MAX_EXTRUDERS],
raw_temp_bed_value;
// Init min and max temp with extreme values to prevent false errors during startup

View File

@ -919,31 +919,37 @@ void kill_screen(const char* lcd_msg) {
* Watch temperature callbacks
*/
#if WATCH_HOTENDS
#if TEMP_SENSOR_0 != 0
#if HAS_TEMP_HOTEND
void watch_temp_callback_E0() { thermalManager.start_watching_heater(0); }
#endif
#if HOTENDS > 1 && TEMP_SENSOR_1 != 0
#if HOTENDS > 1
void watch_temp_callback_E1() { thermalManager.start_watching_heater(1); }
#endif // HOTENDS > 1
#if HOTENDS > 2 && TEMP_SENSOR_2 != 0
#if HOTENDS > 2
void watch_temp_callback_E2() { thermalManager.start_watching_heater(2); }
#endif // HOTENDS > 2
#if HOTENDS > 3 && TEMP_SENSOR_3 != 0
#if HOTENDS > 3
void watch_temp_callback_E3() { thermalManager.start_watching_heater(3); }
#if HOTENDS > 4
void watch_temp_callback_E4() { thermalManager.start_watching_heater(4); }
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#else
#if TEMP_SENSOR_0 != 0
void watch_temp_callback_E0() {}
#endif
#if HOTENDS > 1 && TEMP_SENSOR_1 != 0
void watch_temp_callback_E1() {}
#endif // HOTENDS > 1
#if HOTENDS > 2 && TEMP_SENSOR_2 != 0
void watch_temp_callback_E2() {}
#endif // HOTENDS > 2
#if HOTENDS > 3 && TEMP_SENSOR_3 != 0
#endif // HOTENDS > 1
#endif
#else
#if HAS_TEMP_HOTEND
void watch_temp_callback_E0() {}
#if HOTENDS > 1
void watch_temp_callback_E1() {}
#if HOTENDS > 2
void watch_temp_callback_E2() {}
#if HOTENDS > 3
void watch_temp_callback_E3() {}
#if HOTENDS > 4
void watch_temp_callback_E4() {}
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#endif
#endif
#if WATCH_THE_BED
@ -990,24 +996,17 @@ void kill_screen(const char* lcd_msg) {
// Nozzle [1-4]:
//
#if HOTENDS == 1
#if TEMP_SENSOR_0 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE, &thermalManager.target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0);
#endif
#else //HOTENDS > 1
#if TEMP_SENSOR_0 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N1, &thermalManager.target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0);
#endif
#if TEMP_SENSOR_1 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N2, &thermalManager.target_temperature[1], 0, HEATER_1_MAXTEMP - 15, watch_temp_callback_E1);
#endif
#if HOTENDS > 2
#if TEMP_SENSOR_2 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N3, &thermalManager.target_temperature[2], 0, HEATER_2_MAXTEMP - 15, watch_temp_callback_E2);
#endif
#if HOTENDS > 3
#if TEMP_SENSOR_3 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N4, &thermalManager.target_temperature[3], 0, HEATER_3_MAXTEMP - 15, watch_temp_callback_E3);
#endif
#if HOTENDS > 4
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N5, &thermalManager.target_temperature[4], 0, HEATER_4_MAXTEMP - 15, watch_temp_callback_E4);
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
@ -1041,10 +1040,7 @@ void kill_screen(const char* lcd_msg) {
//
// Flow:
// Flow 1:
// Flow 2:
// Flow 3:
// Flow 4:
// Flow [1-5]:
//
#if EXTRUDERS == 1
MENU_ITEM_EDIT(int3, MSG_FLOW, &flow_percentage[0], 10, 999);
@ -1056,6 +1052,9 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N3, &flow_percentage[2], 10, 999);
#if EXTRUDERS > 3
MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N4, &flow_percentage[3], 10, 999);
#if EXTRUDERS > 4
MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N5, &flow_percentage[4], 10, 999);
#endif //EXTRUDERS > 4
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
@ -1109,7 +1108,7 @@ void kill_screen(const char* lcd_msg) {
}
#endif
constexpr int heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP);
constexpr int heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP);
/**
*
@ -1165,8 +1164,16 @@ void kill_screen(const char* lcd_msg) {
void lcd_preheat_m1_e3() { _lcd_preheat(3, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
void lcd_preheat_m2_e3() { _lcd_preheat(3, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
#endif
#if HOTENDS > 4
void lcd_preheat_m1_e4_only() { _lcd_preheat(4, lcd_preheat_hotend_temp[0], -1, lcd_preheat_fan_speed[0]); }
void lcd_preheat_m2_e4_only() { _lcd_preheat(4, lcd_preheat_hotend_temp[1], -1, lcd_preheat_fan_speed[1]); }
#if TEMP_SENSOR_BED != 0
void lcd_preheat_m1_e4() { _lcd_preheat(4, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
void lcd_preheat_m2_e4() { _lcd_preheat(4, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
#endif
#endif
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
void lcd_preheat_m1_all() {
#if HOTENDS > 1
@ -1175,9 +1182,12 @@ void kill_screen(const char* lcd_msg) {
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 2);
#if HOTENDS > 3
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 3);
#endif
#endif
#endif
#if HOTENDS > 4
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 4);
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#if TEMP_SENSOR_BED != 0
lcd_preheat_m1_e0();
#else
@ -1191,9 +1201,12 @@ void kill_screen(const char* lcd_msg) {
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 2);
#if HOTENDS > 3
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 3);
#endif
#endif
#endif
#if HOTENDS > 4
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 4);
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#if TEMP_SENSOR_BED != 0
lcd_preheat_m2_e0();
#else
@ -1244,10 +1257,18 @@ void kill_screen(const char* lcd_msg) {
#else
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H4, lcd_preheat_m1_e3_only);
#endif
#if HOTENDS > 4
#if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H5, lcd_preheat_m1_e4);
MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E5, lcd_preheat_m1_e4_only);
#else
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H5, lcd_preheat_m1_e4_only);
#endif
#endif
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
MENU_ITEM(function, MSG_PREHEAT_1_ALL, lcd_preheat_m1_all);
#endif
#endif // HOTENDS > 1
#if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_1_BEDONLY, lcd_preheat_m1_bedonly);
#endif
@ -1288,10 +1309,18 @@ void kill_screen(const char* lcd_msg) {
#else
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H4, lcd_preheat_m2_e3_only);
#endif
#if HOTENDS > 4
#if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H5, lcd_preheat_m2_e4);
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E5, lcd_preheat_m2_e4_only);
#else
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H5, lcd_preheat_m2_e4_only);
#endif
#endif
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
MENU_ITEM(function, MSG_PREHEAT_2_ALL, lcd_preheat_m2_all);
#endif
#endif // HOTENDS > 1
#if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_2_BEDONLY, lcd_preheat_m2_bedonly);
#endif
@ -2104,16 +2133,16 @@ void kill_screen(const char* lcd_msg) {
PID_PARAM(Kd, e) = scalePID_d(raw_Kd);
thermalManager.updatePID();
}
#define _PIDTEMP_BASE_FUNCTIONS(eindex) \
void copy_and_scalePID_i_E ## eindex() { copy_and_scalePID_i(eindex); } \
void copy_and_scalePID_d_E ## eindex() { copy_and_scalePID_d(eindex); }
#define _PIDTEMP_BASE_FUNCTIONS(N) \
void copy_and_scalePID_i_E ## N() { copy_and_scalePID_i(N); } \
void copy_and_scalePID_d_E ## N() { copy_and_scalePID_d(N); }
#if ENABLED(PID_AUTOTUNE_MENU)
#define _PIDTEMP_FUNCTIONS(eindex) \
_PIDTEMP_BASE_FUNCTIONS(eindex); \
void lcd_autotune_callback_E ## eindex() { _lcd_autotune(eindex); }
#define _PIDTEMP_FUNCTIONS(N) \
_PIDTEMP_BASE_FUNCTIONS(N); \
void lcd_autotune_callback_E ## N() { _lcd_autotune(N); }
#else
#define _PIDTEMP_FUNCTIONS(eindex) _PIDTEMP_BASE_FUNCTIONS(eindex)
#define _PIDTEMP_FUNCTIONS(N) _PIDTEMP_BASE_FUNCTIONS(N)
#endif
_PIDTEMP_FUNCTIONS(0)
@ -2124,6 +2153,9 @@ void kill_screen(const char* lcd_msg) {
_PIDTEMP_FUNCTIONS(2)
#if HOTENDS > 3
_PIDTEMP_FUNCTIONS(3)
#if HOTENDS > 4
_PIDTEMP_FUNCTIONS(4)
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
@ -2146,27 +2178,20 @@ void kill_screen(const char* lcd_msg) {
//
// Nozzle:
// Nozzle [1-4]:
// Nozzle [1-5]:
//
#if HOTENDS == 1
#if TEMP_SENSOR_0 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE, &thermalManager.target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0);
#endif
#else // HOTENDS > 1
#if TEMP_SENSOR_0 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N1, &thermalManager.target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0);
#endif
#if TEMP_SENSOR_1 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N2, &thermalManager.target_temperature[1], 0, HEATER_1_MAXTEMP - 15, watch_temp_callback_E1);
#endif
#if HOTENDS > 2
#if TEMP_SENSOR_2 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N3, &thermalManager.target_temperature[2], 0, HEATER_2_MAXTEMP - 15, watch_temp_callback_E2);
#endif
#if HOTENDS > 3
#if TEMP_SENSOR_3 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N4, &thermalManager.target_temperature[3], 0, HEATER_3_MAXTEMP - 15, watch_temp_callback_E3);
#endif
#if HOTENDS > 4
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N5, &thermalManager.target_temperature[4], 0, HEATER_4_MAXTEMP - 15, watch_temp_callback_E4);
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
@ -2247,6 +2272,9 @@ void kill_screen(const char* lcd_msg) {
PID_MENU_ITEMS(" " MSG_E3, 2);
#if HOTENDS > 3
PID_MENU_ITEMS(" " MSG_E4, 3);
#if HOTENDS > 4
PID_MENU_ITEMS(" " MSG_E5, 4);
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#else // !PID_PARAMS_PER_HOTEND || HOTENDS == 1
@ -2268,7 +2296,10 @@ void kill_screen(const char* lcd_msg) {
}
void _lcd_control_temperature_preheat_settings_menu(uint8_t material) {
#if HOTENDS > 3
#if HOTENDS > 4
#define MINTEMP_ALL MIN5(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP)
#define MAXTEMP_ALL MAX5(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP)
#elif HOTENDS > 3
#define MINTEMP_ALL MIN4(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP)
#define MAXTEMP_ALL MAX4(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP)
#elif HOTENDS > 2
@ -2462,6 +2493,9 @@ void kill_screen(const char* lcd_msg) {
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E3, &filament_size[2], 1.5, 3.25, calculate_volumetric_multipliers);
#if EXTRUDERS > 3
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E4, &filament_size[3], 1.5, 3.25, calculate_volumetric_multipliers);
#if EXTRUDERS > 4
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E5, &filament_size[4], 1.5, 3.25, calculate_volumetric_multipliers);
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1