MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

Update links, README, contributing, etc.

Browse Source
This commit is contained in:
Scott Lahteine 2020-07-23 20:59:43 -05:00
parent b73ac40fa3
commit 8b637e436c
76 changed files with 91 additions and 92 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
.github/FUNDING.yml vendored
View File

@ -1,3 +1,3 @@
github: [thinkyhead] github: [thinkyhead]
patreon: thinkyhead patreon: thinkyhead
custom: ["http://www.thinkyhead.com/donate-to-marlin"] custom: ["https://www.thinkyhead.com/donate-to-marlin"]

11
.github/contributing.md vendored
View File

@ -34,16 +34,15 @@ This project and everyone participating in it is governed by the [Marlin Code of
We have a Message Board and a Facebook group where our knowledgable user community can provide helpful advice if you have questions. We have a Message Board and a Facebook group where our knowledgable user community can provide helpful advice if you have questions.
* [Marlin RepRap forum](http://forums.reprap.org/list.php?415) * [Marlin RepRap forum](https://reprap.org/forum/list.php?415)
* [MarlinFirmware on Facebook](https://www.facebook.com/groups/1049718498464482/) * [MarlinFirmware on Facebook](https://www.facebook.com/groups/1049718498464482/)
If chat is more your speed, you can join the MarlinFirmware Slack team: If chat is more your speed, you can join the MarlinFirmware Discord server:
* Join the Marlin Slack Team * Use the link https://discord.gg/n5NJ59y to join up as a General User.
* To obtain group access, please [send a request](http://www.thinkyhead.com/contact/9) to @thinkyhead. * Even though our Discord is pretty active, it may take a while for community members to respond — please be patient!
* Even though Slack is a chat service, sometimes it takes several hours for community members to respond — please be patient!
* Use the `#general` channel for general questions or discussion about Marlin. * Use the `#general` channel for general questions or discussion about Marlin.
* Other channels exist for certain topics. Check the channel list. * Other channels exist for certain topics or are limited to Patrons. Check the channel list.
## How Can I Contribute? ## How Can I Contribute?

2
Marlin/Configuration.h
View File

@ -463,7 +463,7 @@
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================
// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning // PID Tuning Guide here: https://reprap.org/wiki/PID_Tuning
// Comment the following line to disable PID and enable bang-bang. // Comment the following line to disable PID and enable bang-bang.
#define PIDTEMP #define PIDTEMP

2
Marlin/Marlin.ino
View File

@ -35,7 +35,7 @@ Configuration
Getting Help Getting Help
- http://forums.reprap.org/list.php?415 - https://reprap.org/forum/list.php?415
The Marlin Discussion Forum is a great place to get help from other Marlin The Marlin Discussion Forum is a great place to get help from other Marlin
users who may have experienced similar issues to your own. users who may have experienced similar issues to your own.

2
Marlin/src/HAL/AVR/fastio.h
View File

@ -57,7 +57,7 @@
* *
* Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW); * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
* *
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
*/ */
#define _READ(IO) TEST(DIO ## IO ## _RPORT, DIO ## IO ## _PIN) #define _READ(IO) TEST(DIO ## IO ## _RPORT, DIO ## IO ## _PIN)

2
Marlin/src/HAL/DUE/Tone.cpp
View File

@ -24,7 +24,7 @@
/** /**
* Description: Tone function for Arduino Due and compatible (SAM3X8E) * Description: Tone function for Arduino Due and compatible (SAM3X8E)
* Derived from http://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012 * Derived from https://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
*/ */
#ifdef ARDUINO_ARCH_SAM #ifdef ARDUINO_ARCH_SAM

2
Marlin/src/HAL/DUE/fastio.h
View File

@ -58,7 +58,7 @@
* *
* Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW); * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
* *
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
*/ */
// Read a pin // Read a pin

2
Marlin/src/HAL/DUE/usb/arduino_due_x.h
View File

@ -43,7 +43,7 @@
#pragma once #pragma once
/** /**
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
/** /**

2
Marlin/src/HAL/DUE/usb/compiler.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef UTILS_COMPILER_H #ifndef UTILS_COMPILER_H

2
Marlin/src/HAL/DUE/usb/conf_access.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _CONF_ACCESS_H_ #ifndef _CONF_ACCESS_H_

2
Marlin/src/HAL/DUE/usb/conf_clock.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef CONF_CLOCK_H_INCLUDED #ifndef CONF_CLOCK_H_INCLUDED

2
Marlin/src/HAL/DUE/usb/conf_usb.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _CONF_USB_H_ #ifndef _CONF_USB_H_

2
Marlin/src/HAL/DUE/usb/ctrl_access.c
View File

@ -53,7 +53,7 @@
* *
******************************************************************************/ ******************************************************************************/
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifdef ARDUINO_ARCH_SAM #ifdef ARDUINO_ARCH_SAM

2
Marlin/src/HAL/DUE/usb/ctrl_access.h
View File

@ -53,7 +53,7 @@
* *
******************************************************************************/ ******************************************************************************/
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */

2
Marlin/src/HAL/DUE/usb/genclk.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef CHIP_GENCLK_H_INCLUDED #ifndef CHIP_GENCLK_H_INCLUDED

2
Marlin/src/HAL/DUE/usb/mrepeat.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _MREPEAT_H_ #ifndef _MREPEAT_H_

2
Marlin/src/HAL/DUE/usb/osc.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef CHIP_OSC_H_INCLUDED #ifndef CHIP_OSC_H_INCLUDED

2
Marlin/src/HAL/DUE/usb/pll.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef CHIP_PLL_H_INCLUDED #ifndef CHIP_PLL_H_INCLUDED

2
Marlin/src/HAL/DUE/usb/preprocessor.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _PREPROCESSOR_H_ #ifndef _PREPROCESSOR_H_

2
Marlin/src/HAL/DUE/usb/sbc_protocol.h
View File

@ -52,7 +52,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _SBC_PROTOCOL_H_ #ifndef _SBC_PROTOCOL_H_
#define _SBC_PROTOCOL_H_ #define _SBC_PROTOCOL_H_

2
Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h
View File

@ -42,7 +42,7 @@
* *
******************************************************************************/ ******************************************************************************/
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */

2
Marlin/src/HAL/DUE/usb/spc_protocol.h
View File

@ -45,7 +45,7 @@
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _SPC_PROTOCOL_H_ #ifndef _SPC_PROTOCOL_H_
#define _SPC_PROTOCOL_H_ #define _SPC_PROTOCOL_H_

2
Marlin/src/HAL/DUE/usb/stringz.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _STRINGZ_H_ #ifndef _STRINGZ_H_

2
Marlin/src/HAL/DUE/usb/sysclk.c
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifdef ARDUINO_ARCH_SAM #ifdef ARDUINO_ARCH_SAM

2
Marlin/src/HAL/DUE/usb/sysclk.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef CHIP_SYSCLK_H_INCLUDED #ifndef CHIP_SYSCLK_H_INCLUDED

2
Marlin/src/HAL/DUE/usb/tpaste.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _TPASTE_H_ #ifndef _TPASTE_H_

2
Marlin/src/HAL/DUE/usb/udc.c
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifdef ARDUINO_ARCH_SAM #ifdef ARDUINO_ARCH_SAM

2
Marlin/src/HAL/DUE/usb/udc.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _UDC_H_ #ifndef _UDC_H_

2
Marlin/src/HAL/DUE/usb/udc_desc.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _UDC_DESC_H_ #ifndef _UDC_DESC_H_

2
Marlin/src/HAL/DUE/usb/udd.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _UDD_H_ #ifndef _UDD_H_

2
Marlin/src/HAL/DUE/usb/udi.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _UDI_H_ #ifndef _UDI_H_

2
Marlin/src/HAL/DUE/usb/udi_cdc.c
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifdef ARDUINO_ARCH_SAM #ifdef ARDUINO_ARCH_SAM

4
Marlin/src/HAL/DUE/usb/udi_cdc.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _UDI_CDC_H_ #ifndef _UDI_CDC_H_
@ -701,7 +701,7 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
* another "Composite Device" module, like "USB HID Mouse (Composite Device)". * another "Composite Device" module, like "USB HID Mouse (Composite Device)".
* *
* Also, you can refer to application note * Also, you can refer to application note
* <A href="http://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf"> * <A href="https://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
* AVR4902 ASF - USB Composite Device</A>. * AVR4902 ASF - USB Composite Device</A>.
* *
* \section udi_cdc_use_case_composite_setup Setup steps * \section udi_cdc_use_case_composite_setup Setup steps

2
Marlin/src/HAL/DUE/usb/udi_cdc_conf.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _UDI_CDC_CONF_H_ #ifndef _UDI_CDC_CONF_H_

2
Marlin/src/HAL/DUE/usb/udi_cdc_desc.c
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifdef ARDUINO_ARCH_SAM #ifdef ARDUINO_ARCH_SAM

2
Marlin/src/HAL/DUE/usb/udi_composite_desc.c
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifdef ARDUINO_ARCH_SAM #ifdef ARDUINO_ARCH_SAM

2
Marlin/src/HAL/DUE/usb/udi_msc.c
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifdef ARDUINO_ARCH_SAM #ifdef ARDUINO_ARCH_SAM

4
Marlin/src/HAL/DUE/usb/udi_msc.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _UDI_MSC_H_ #ifndef _UDI_MSC_H_
@ -290,7 +290,7 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
* another "Composite Device" module, like "USB HID Mouse (Composite Device)". * another "Composite Device" module, like "USB HID Mouse (Composite Device)".
* *
* Also, you can refer to application note * Also, you can refer to application note
* <A href="http://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf"> * <A href="https://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
* AVR4902 ASF - USB Composite Device</A>. * AVR4902 ASF - USB Composite Device</A>.
* *
* \section udi_msc_use_case_composite_setup Setup steps * \section udi_msc_use_case_composite_setup Setup steps

2
Marlin/src/HAL/DUE/usb/uotghs_device_due.c
View File

@ -42,7 +42,7 @@
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifdef ARDUINO_ARCH_SAM #ifdef ARDUINO_ARCH_SAM

2
Marlin/src/HAL/DUE/usb/uotghs_device_due.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef UOTGHS_DEVICE_DUE_H_INCLUDED #ifndef UOTGHS_DEVICE_DUE_H_INCLUDED

2
Marlin/src/HAL/DUE/usb/uotghs_otg.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef UOTGHS_OTG_H_INCLUDED #ifndef UOTGHS_OTG_H_INCLUDED

2
Marlin/src/HAL/DUE/usb/usb_protocol.h
View File

@ -44,7 +44,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _USB_PROTOCOL_H_ #ifndef _USB_PROTOCOL_H_

2
Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _USB_PROTOCOL_CDC_H_ #ifndef _USB_PROTOCOL_CDC_H_
#define _USB_PROTOCOL_CDC_H_ #define _USB_PROTOCOL_CDC_H_

2
Marlin/src/HAL/DUE/usb/usb_protocol_msc.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _USB_PROTOCOL_MSC_H_ #ifndef _USB_PROTOCOL_MSC_H_

2
Marlin/src/HAL/DUE/usb/usb_task.c
View File

@ -41,7 +41,7 @@
* *
*/ */
// Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> // Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
#ifdef ARDUINO_ARCH_SAM #ifdef ARDUINO_ARCH_SAM

2
Marlin/src/HAL/DUE/usb/usb_task.h
View File

@ -41,7 +41,7 @@
* *
*/ */
/* /*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/ */
#ifndef _USB_TASK_H_ #ifndef _USB_TASK_H_

2
Marlin/src/HAL/LINUX/fastio.h
View File

@ -44,7 +44,7 @@
* *
* Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW); * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
* *
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
*/ */
/// Read a pin /// Read a pin

2
Marlin/src/HAL/LPC1768/fastio.h
View File

@ -56,7 +56,7 @@
* *
* Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW); * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
* *
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
*/ */
/// Read a pin /// Read a pin

2
Marlin/src/HAL/STM32F1/SPI.cpp
View File

@ -216,7 +216,7 @@ void SPIClass::setDataMode(uint8_t dataMode) {
/** /**
* Notes: * Notes:
* As far as we know the AVR numbers for dataMode match the numbers required by the STM32. * As far as we know the AVR numbers for dataMode match the numbers required by the STM32.
* From the AVR doc http://www.atmel.com/images/doc2585.pdf section 2.4 * From the AVR doc https://www.atmel.com/images/doc2585.pdf section 2.4
* *
* SPI Mode CPOL CPHA Shift SCK-edge Capture SCK-edge * SPI Mode CPOL CPHA Shift SCK-edge Capture SCK-edge
* 0 0 0 Falling Rising * 0 0 0 Falling Rising

2
Marlin/src/HAL/TEENSY31_32/fastio.h
View File

@ -39,7 +39,7 @@
* *
* Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW); * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
* *
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
*/ */
#define _READ(P) bool(CORE_PIN ## P ## _PINREG & CORE_PIN ## P ## _BITMASK) #define _READ(P) bool(CORE_PIN ## P ## _PINREG & CORE_PIN ## P ## _BITMASK)

2
Marlin/src/HAL/TEENSY35_36/fastio.h
View File

@ -39,7 +39,7 @@
* *
* Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW); * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
* *
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
*/ */
#define _READ(P) bool(CORE_PIN ## P ## _PINREG & CORE_PIN ## P ## _BITMASK) #define _READ(P) bool(CORE_PIN ## P ## _PINREG & CORE_PIN ## P ## _BITMASK)

2
Marlin/src/HAL/shared/backtrace/unwarmbytab.cpp
View File

@ -4,7 +4,7 @@
* *
* This Source Code Form is subject to the terms of the Mozilla Public * This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this * License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. * file, You can obtain one at https://mozilla.org/MPL/2.0/.
* *
* This library was modified, some bugs fixed, stack address validated * This library was modified, some bugs fixed, stack address validated
* and adapted to be used in Marlin 3D printer firmware as backtracer * and adapted to be used in Marlin 3D printer firmware as backtracer

2
Marlin/src/feature/dac/dac_mcp4728.cpp
View File

@ -24,7 +24,7 @@
* mcp4728.cpp - Arduino library for MicroChip MCP4728 I2C D/A converter * mcp4728.cpp - Arduino library for MicroChip MCP4728 I2C D/A converter
* *
* For implementation details, please take a look at the datasheet: * For implementation details, please take a look at the datasheet:
* http://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf * https://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf
* *
* For discussion and feedback, please go to: * For discussion and feedback, please go to:
* http://arduino.cc/forum/index.php/topic,51842.0.html * http://arduino.cc/forum/index.php/topic,51842.0.html

2
Marlin/src/gcode/motion/G5.cpp
View File

@ -29,7 +29,7 @@
/** /**
* Parameters interpreted according to: * Parameters interpreted according to:
* http://linuxcnc.org/docs/2.6/html/gcode/parser.html#sec:G5-Cubic-Spline * https://linuxcnc.org/docs/2.6/html/gcode/gcode.html#sec:G5-Cubic-Spline
* However I, J omission is not supported at this point; all * However I, J omission is not supported at this point; all
* parameters can be omitted and default to zero. * parameters can be omitted and default to zero.
*/ */

6
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h
View File

@ -125,11 +125,11 @@
/* /*
* Settings for the 4D Systems, 4.3" Embedded SPI Display 480x272, SPI, FT800 (4DLCD-FT843) * Settings for the 4D Systems, 4.3" Embedded SPI Display 480x272, SPI, FT800 (4DLCD-FT843)
* *
* http://www.4dsystems.com.au/product/4DLCD_FT843/ * https://4dsystems.com.au/4dlcd-ft843
* *
* Datasheet: * Datasheet:
* *
* http://www.4dsystems.com.au/productpages/4DLCD-FT843/downloads/FT843-4.3-Display_datasheet_R_1_2.pdf * https://4dsystems.com.au/mwdownloads/download/link/id/52/
* *
*/ */
@ -157,7 +157,7 @@
* *
* Datasheet: * Datasheet:
* *
* http://www.hantronix.com/files/data/s1501799605s500-gh7.pdf * https://www.hantronix.com/files/data/s1501799605s500-gh7.pdf
* *
*/ */
#elif defined(LCD_ALEPHOBJECTS_CLCD_UI) #elif defined(LCD_ALEPHOBJECTS_CLCD_UI)

2
Marlin/src/module/scara.cpp
View File

@ -100,7 +100,7 @@ void inverse_kinematics(const xyz_pos_t &raw) {
/** /**
* Morgan SCARA Inverse Kinematics. Results in 'delta'. * Morgan SCARA Inverse Kinematics. Results in 'delta'.
* *
* See http://forums.reprap.org/read.php?185,283327 * See https://reprap.org/forum/read.php?185,283327
* *
* Maths and first version by QHARLEY. * Maths and first version by QHARLEY.
* Integrated into Marlin and slightly restructured by Joachim Cerny. * Integrated into Marlin and slightly restructured by Joachim Cerny.

2
Marlin/src/module/thermistor/thermistor_2.h
View File

@ -23,7 +23,7 @@
// //
// R25 = 200 kOhm, beta25 = 4338 K, 4.7 kOhm pull-up, ATC Semitec 204GT-2 // R25 = 200 kOhm, beta25 = 4338 K, 4.7 kOhm pull-up, ATC Semitec 204GT-2
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf // Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance // Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
// //
const short temptable_2[][2] PROGMEM = { const short temptable_2[][2] PROGMEM = {

2
Marlin/src/module/thermistor/thermistor_5.h
View File

@ -24,7 +24,7 @@
// R25 = 100 kOhm, beta25 = 4267 K, 4.7 kOhm pull-up // R25 = 100 kOhm, beta25 = 4267 K, 4.7 kOhm pull-up
// 100k ParCan thermistor (104GT-2) // 100k ParCan thermistor (104GT-2)
// ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan) // ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf // Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance // Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
const short temptable_5[][2] PROGMEM = { const short temptable_5[][2] PROGMEM = {
{ OV( 1), 713 }, { OV( 1), 713 },

2
Marlin/src/module/thermistor/thermistor_52.h
View File

@ -23,7 +23,7 @@
// R25 = 200 kOhm, beta25 = 4338 K, 1 kOhm pull-up, // R25 = 200 kOhm, beta25 = 4338 K, 1 kOhm pull-up,
// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) // 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf // Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
// Advantage: More resolution and better linearity from 150C to 200C // Advantage: More resolution and better linearity from 150C to 200C
const short temptable_52[][2] PROGMEM = { const short temptable_52[][2] PROGMEM = {

2
Marlin/src/module/thermistor/thermistor_55.h
View File

@ -23,7 +23,7 @@
// R25 = 100 kOhm, beta25 = 4267 K, 1 kOhm pull-up, // R25 = 100 kOhm, beta25 = 4267 K, 1 kOhm pull-up,
// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) // 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf // Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
// Advantage: More resolution and better linearity from 150C to 200C // Advantage: More resolution and better linearity from 150C to 200C
const short temptable_55[][2] PROGMEM = { const short temptable_55[][2] PROGMEM = {

2
Marlin/src/pins/sam/pins_ALLIGATOR_R2.h
View File

@ -23,7 +23,7 @@
/** /**
* Alligator Board R2 * Alligator Board R2
* http://www.3dartists.org/ * https://reprap.org/wiki/Alligator_Board
*/ */
#ifndef __SAM3X8E__ #ifndef __SAM3X8E__

4
Marlin/src/pins/sanguino/pins_OMCA.h
View File

@ -49,7 +49,7 @@
* PWM (D 14) PD6 20| |21 PD7 (D 15) PWM * PWM (D 14) PD6 20| |21 PD7 (D 15) PWM
* +--------+ * +--------+
* *
* REF http://sanguino.cc/hardware * REF http://sanguino.wikidot.com/hardware
*/ */
/** /**
@ -70,7 +70,7 @@
* *
* When installing select 1.0.2 * When installing select 1.0.2
* *
* Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino * Installation instructions can be found at http://learn.sparkfun.com/pages/CustomBoardsArduino
* Just use the above JSON URL instead of Sparkfun's JSON. * Just use the above JSON URL instead of Sparkfun's JSON.
* *
* Once installed select the Sanguino board and then select the CPU. * Once installed select the Sanguino board and then select the CPU.

2
Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h
View File

@ -23,7 +23,7 @@
/** /**
* STM32F407VET6 with RAMPS-like shield * STM32F407VET6 with RAMPS-like shield
* 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407 * 'Black' STM32F407VET6 board - https://www.stm32duino.com/viewtopic.php?t=485
* Shield - https://github.com/jmz52/Hardware * Shield - https://github.com/jmz52/Hardware
*/ */

2
Marlin/src/sd/SdFatStructs.h
View File

@ -39,7 +39,7 @@
/** /**
* mostly from Microsoft document fatgen103.doc * mostly from Microsoft document fatgen103.doc
* http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx * https://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
*/ */
uint8_t const BOOTSIG0 = 0x55, // Value for byte 510 of boot block or MBR uint8_t const BOOTSIG0 = 0x55, // Value for byte 510 of boot block or MBR

2
Marlin/src/sd/SdInfo.h
View File

@ -39,7 +39,7 @@
// Version 3.01 // Version 3.01
// May 18, 2010 // May 18, 2010
// //
// http://www.sdcard.org/developers/tech/sdcard/pls/simplified_specs // https://www.sdcard.org/downloads/pls/index.html
// SD card commands // SD card commands
uint8_t const CMD0 = 0x00, // GO_IDLE_STATE - init card in spi mode if CS low uint8_t const CMD0 = 0x00, // GO_IDLE_STATE - init card in spi mode if CS low

2
README.md
View File

@ -66,7 +66,7 @@ The current Marlin dev team consists of:
- Chris Pepper [[@p3p](https://github.com/p3p)] - UK - Chris Pepper [[@p3p](https://github.com/p3p)] - UK
- Bob Kuhn [[@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)] - USA - Bob Kuhn [[@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)] - USA
- João Brazio [[@jbrazio](https://github.com/jbrazio)] - Portugal - João Brazio [[@jbrazio](https://github.com/jbrazio)] - Portugal
- Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands &nbsp; [![Flattr Erik](http://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software) - Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands &nbsp; [![Flattr Erik](https://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
## License ## License

4
buildroot/etc/udev/rules.d/99-platformio-udev.rules
View File

@ -4,7 +4,7 @@
# you may not use this file except in compliance with the License. # you may not use this file except in compliance with the License.
# You may obtain a copy of the License at # You may obtain a copy of the License at
# #
# http://www.apache.org/licenses/LICENSE-2.0 # https://www.apache.org/licenses/LICENSE-2.0
# #
# Unless required by applicable law or agreed to in writing, software # Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, # distributed under the License is distributed on an "AS IS" BASIS,
@ -16,7 +16,7 @@
# #
# INSTALLATION # INSTALLATION
# #
# Please visit > http://docs.platformio.org/en/latest/faq.html#platformio-udev-rules # Please visit > https://docs.platformio.org/en/latest/faq.html#platformio-udev-rules
# #
##################################################################################### #####################################################################################

2
buildroot/share/PlatformIO/boards/BigTree_Btt002.json
View File

@ -41,6 +41,6 @@
"use_1200bps_touch": false, "use_1200bps_touch": false,
"wait_for_upload_port": false "wait_for_upload_port": false
}, },
"url": "http://www.st.com/en/microcontrollers/stm32f407ve.html", "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407vg.html",
"vendor": "Generic" "vendor": "Generic"
} }

2
buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json
View File

@ -41,6 +41,6 @@
"use_1200bps_touch": false, "use_1200bps_touch": false,
"wait_for_upload_port": false "wait_for_upload_port": false
}, },
"url": "http://www.st.com/en/microcontrollers/stm32f407zg.html", "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407zg.html",
"vendor": "Generic" "vendor": "Generic"
} }

2
buildroot/share/PlatformIO/boards/FLYF407ZG.json
View File

@ -60,6 +60,6 @@
"use_1200bps_touch": false, "use_1200bps_touch": false,
"wait_for_upload_port": false "wait_for_upload_port": false
}, },
"url": "http://www.st.com/en/microcontrollers/stm32f407ZG.html", "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ZG.html",
"vendor": "Generic" "vendor": "Generic"
} }

2
buildroot/share/PlatformIO/boards/blackSTM32F407VET6.json
View File

@ -60,6 +60,6 @@
"use_1200bps_touch": false, "use_1200bps_touch": false,
"wait_for_upload_port": false "wait_for_upload_port": false
}, },
"url": "http://www.st.com/en/microcontrollers/stm32f407ve.html", "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ve.html",
"vendor": "Generic" "vendor": "Generic"
} }

2
buildroot/share/PlatformIO/boards/malyanM200.json
View File

@ -31,6 +31,6 @@
"use_1200bps_touch": false, "use_1200bps_touch": false,
"wait_for_upload_port": false "wait_for_upload_port": false
}, },
"url": "http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f1-series/stm32f103/stm32f103cb.html", "url": "https://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f1-series/stm32f103/stm32f103cb.html",
"vendor": "Generic" "vendor": "Generic"
} }

4
buildroot/share/fonts/README.md
View File

@ -5,7 +5,7 @@
The original author of the following font files is [A. Hardtung](https://github.com/AnHardt). The original author of the following font files is [A. Hardtung](https://github.com/AnHardt).
Any copyright is dedicated to the Public Domain. Any copyright is dedicated to the Public Domain.
http://creativecommons.org/publicdomain/zero/1.0/ https://creativecommons.org/publicdomain/zero/1.0/
- HD44780_C.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a)) - HD44780_C.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a))
- HD44780_J.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a)) - HD44780_J.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a))
@ -20,4 +20,4 @@ Additional changes to the original font files distributed with Marlin are copyri
## Documentation ## Documentation
For detailed information about [adding new fonts](http://www.marlinfw.org/docs/development/fonts.html) to Marlin visit our documentation website. For detailed information about [adding new fonts](https://www.marlinfw.org/docs/development/fonts.html) to Marlin visit our documentation website.

6
buildroot/share/fonts/uxggenpages.md
View File

@ -99,12 +99,12 @@ At this time, the font file `marlin-6x12-3.bdf` is used to generate the font dat
- [WQY](http://wenq.org/) - [WQY](http://wenq.org/)
- [WQY 9pt bitmap font](http://wenq.org/daily/wqy-bitmapfont-bdf-gb18030-nightly_build.tar.gz) - [WQY 9pt bitmap font](http://wenq.org/daily/wqy-bitmapfont-bdf-gb18030-nightly_build.tar.gz)
- [unifont (16x8 or 16x16)](http://unifoundry.com/unifont.html) - [unifont (16x8 or 16x16)](https://unifoundry.com/unifont.html)
Documents related to the old version of the language engine: Documents related to the old version of the language engine:
- [Marlin Fonts Documentation](http://www.marlinfw.org/docs/development/fonts.html) - [Marlin Fonts Documentation](https://www.marlinfw.org/docs/development/fonts.html)
- [Marlin LCD Language](http://marlinfw.org/docs/development/lcd_language.html) - [Marlin LCD Language](https://marlinfw.org/docs/development/lcd_language.html)
- [U8GLIB](https://github.com/olikraus/u8glib.git) - [U8GLIB](https://github.com/olikraus/u8glib.git)
- [UTF-8 for U8GLIB](https://github.com/yhfudev/u8glib-fontutf8.git) - [UTF-8 for U8GLIB](https://github.com/yhfudev/u8glib-fontutf8.git)
- [Standalone test project for the Marlin UTF-8 language engine](https://github.com/yhfudev/marlin-fontutf8.git) - [Standalone test project for the Marlin UTF-8 language engine](https://github.com/yhfudev/marlin-fontutf8.git)

4
buildroot/share/scripts/createTemperatureLookupMarlin.py
View File

@ -2,10 +2,10 @@
"""Thermistor Value Lookup Table Generator """Thermistor Value Lookup Table Generator
Generates lookup to temperature values for use in a microcontroller in C format based on: Generates lookup to temperature values for use in a microcontroller in C format based on:
http://en.wikipedia.org/wiki/Steinhart-Hart_equation https://en.wikipedia.org/wiki/Steinhart-Hart_equation
The main use is for Arduino programs that read data from the circuit board described here: The main use is for Arduino programs that read data from the circuit board described here:
http://reprap.org/wiki/Temperature_Sensor_v2.0 https://reprap.org/wiki/Temperature_Sensor_v2.0
Usage: python createTemperatureLookupMarlin.py [options] Usage: python createTemperatureLookupMarlin.py [options]

2
platformio.ini
View File

@ -647,7 +647,7 @@ upload_protocol = serial
# #
# STM32F407VET6 with RAMPS-like shield # STM32F407VET6 with RAMPS-like shield
# 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407 # 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407
# Shield - https://github.com/jmz52/Hardware # Shield - https://github.com/jmz52/Hardware
# #
[env:STM32F407VE_black] [env:STM32F407VE_black]