Update links, README, contributing, etc.

This commit is contained in:
Scott Lahteine 2020-07-23 20:59:43 -05:00
parent b73ac40fa3
commit 8b637e436c
76 changed files with 91 additions and 92 deletions

2
.github/FUNDING.yml vendored
View File

@ -1,3 +1,3 @@
github: [thinkyhead]
patreon: thinkyhead
custom: ["http://www.thinkyhead.com/donate-to-marlin"]
custom: ["https://www.thinkyhead.com/donate-to-marlin"]

View File

@ -34,16 +34,15 @@ This project and everyone participating in it is governed by the [Marlin Code of
We have a Message Board and a Facebook group where our knowledgable user community can provide helpful advice if you have questions.
* [Marlin RepRap forum](http://forums.reprap.org/list.php?415)
* [Marlin RepRap forum](https://reprap.org/forum/list.php?415)
* [MarlinFirmware on Facebook](https://www.facebook.com/groups/1049718498464482/)
If chat is more your speed, you can join the MarlinFirmware Slack team:
If chat is more your speed, you can join the MarlinFirmware Discord server:
* Join the Marlin Slack Team
* To obtain group access, please [send a request](http://www.thinkyhead.com/contact/9) to @thinkyhead.
* Even though Slack is a chat service, sometimes it takes several hours for community members to respond — please be patient!
* Use the link https://discord.gg/n5NJ59y to join up as a General User.
* Even though our Discord is pretty active, it may take a while for community members to respond — please be patient!
* Use the `#general` channel for general questions or discussion about Marlin.
* Other channels exist for certain topics. Check the channel list.
* Other channels exist for certain topics or are limited to Patrons. Check the channel list.
## How Can I Contribute?

View File

@ -463,7 +463,7 @@
//===========================================================================
//============================= PID Settings ================================
//===========================================================================
// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning
// PID Tuning Guide here: https://reprap.org/wiki/PID_Tuning
// Comment the following line to disable PID and enable bang-bang.
#define PIDTEMP

View File

@ -35,7 +35,7 @@ Configuration
Getting Help
- http://forums.reprap.org/list.php?415
- https://reprap.org/forum/list.php?415
The Marlin Discussion Forum is a great place to get help from other Marlin
users who may have experienced similar issues to your own.

View File

@ -57,7 +57,7 @@
*
* Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
*
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
* Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
*/
#define _READ(IO) TEST(DIO ## IO ## _RPORT, DIO ## IO ## _PIN)

View File

@ -24,7 +24,7 @@
/**
* Description: Tone function for Arduino Due and compatible (SAM3X8E)
* Derived from http://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
* Derived from https://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
*/
#ifdef ARDUINO_ARCH_SAM

View File

@ -58,7 +58,7 @@
*
* Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
*
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
* Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
*/
// Read a pin

View File

@ -43,7 +43,7 @@
#pragma once
/**
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
/**

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef UTILS_COMPILER_H

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _CONF_ACCESS_H_

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef CONF_CLOCK_H_INCLUDED

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _CONF_USB_H_

View File

@ -53,7 +53,7 @@
*
******************************************************************************/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifdef ARDUINO_ARCH_SAM

View File

@ -53,7 +53,7 @@
*
******************************************************************************/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef CHIP_GENCLK_H_INCLUDED

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _MREPEAT_H_

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef CHIP_OSC_H_INCLUDED

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef CHIP_PLL_H_INCLUDED

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _PREPROCESSOR_H_

View File

@ -52,7 +52,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _SBC_PROTOCOL_H_
#define _SBC_PROTOCOL_H_

View File

@ -42,7 +42,7 @@
*
******************************************************************************/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/

View File

@ -45,7 +45,7 @@
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _SPC_PROTOCOL_H_
#define _SPC_PROTOCOL_H_

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _STRINGZ_H_

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifdef ARDUINO_ARCH_SAM

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef CHIP_SYSCLK_H_INCLUDED

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _TPASTE_H_

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifdef ARDUINO_ARCH_SAM

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _UDC_H_

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _UDC_DESC_H_

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _UDD_H_

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _UDI_H_

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifdef ARDUINO_ARCH_SAM

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _UDI_CDC_H_
@ -701,7 +701,7 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
* another "Composite Device" module, like "USB HID Mouse (Composite Device)".
*
* Also, you can refer to application note
* <A href="http://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
* <A href="https://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
* AVR4902 ASF - USB Composite Device</A>.
*
* \section udi_cdc_use_case_composite_setup Setup steps

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _UDI_CDC_CONF_H_

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifdef ARDUINO_ARCH_SAM

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifdef ARDUINO_ARCH_SAM

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifdef ARDUINO_ARCH_SAM

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _UDI_MSC_H_
@ -290,7 +290,7 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
* another "Composite Device" module, like "USB HID Mouse (Composite Device)".
*
* Also, you can refer to application note
* <A href="http://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
* <A href="https://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
* AVR4902 ASF - USB Composite Device</A>.
*
* \section udi_msc_use_case_composite_setup Setup steps

View File

@ -42,7 +42,7 @@
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifdef ARDUINO_ARCH_SAM

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef UOTGHS_DEVICE_DUE_H_INCLUDED

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef UOTGHS_OTG_H_INCLUDED

View File

@ -44,7 +44,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _USB_PROTOCOL_H_

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _USB_PROTOCOL_CDC_H_
#define _USB_PROTOCOL_CDC_H_

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _USB_PROTOCOL_MSC_H_

View File

@ -41,7 +41,7 @@
*
*/
// Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
// Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
#ifdef ARDUINO_ARCH_SAM

View File

@ -41,7 +41,7 @@
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _USB_TASK_H_

View File

@ -44,7 +44,7 @@
*
* Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
*
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
* Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
*/
/// Read a pin

View File

@ -56,7 +56,7 @@
*
* Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
*
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
* Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
*/
/// Read a pin

View File

@ -216,7 +216,7 @@ void SPIClass::setDataMode(uint8_t dataMode) {
/**
* Notes:
* As far as we know the AVR numbers for dataMode match the numbers required by the STM32.
* From the AVR doc http://www.atmel.com/images/doc2585.pdf section 2.4
* From the AVR doc https://www.atmel.com/images/doc2585.pdf section 2.4
*
* SPI Mode CPOL CPHA Shift SCK-edge Capture SCK-edge
* 0 0 0 Falling Rising

View File

@ -39,7 +39,7 @@
*
* Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
*
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
* Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
*/
#define _READ(P) bool(CORE_PIN ## P ## _PINREG & CORE_PIN ## P ## _BITMASK)

View File

@ -39,7 +39,7 @@
*
* Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
*
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
* Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
*/
#define _READ(P) bool(CORE_PIN ## P ## _PINREG & CORE_PIN ## P ## _BITMASK)

View File

@ -4,7 +4,7 @@
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
* file, You can obtain one at https://mozilla.org/MPL/2.0/.
*
* This library was modified, some bugs fixed, stack address validated
* and adapted to be used in Marlin 3D printer firmware as backtracer

View File

@ -24,7 +24,7 @@
* mcp4728.cpp - Arduino library for MicroChip MCP4728 I2C D/A converter
*
* For implementation details, please take a look at the datasheet:
* http://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf
* https://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf
*
* For discussion and feedback, please go to:
* http://arduino.cc/forum/index.php/topic,51842.0.html

View File

@ -29,7 +29,7 @@
/**
* Parameters interpreted according to:
* http://linuxcnc.org/docs/2.6/html/gcode/parser.html#sec:G5-Cubic-Spline
* https://linuxcnc.org/docs/2.6/html/gcode/gcode.html#sec:G5-Cubic-Spline
* However I, J omission is not supported at this point; all
* parameters can be omitted and default to zero.
*/

View File

@ -125,11 +125,11 @@
/*
* Settings for the 4D Systems, 4.3" Embedded SPI Display 480x272, SPI, FT800 (4DLCD-FT843)
*
* http://www.4dsystems.com.au/product/4DLCD_FT843/
* https://4dsystems.com.au/4dlcd-ft843
*
* Datasheet:
*
* http://www.4dsystems.com.au/productpages/4DLCD-FT843/downloads/FT843-4.3-Display_datasheet_R_1_2.pdf
* https://4dsystems.com.au/mwdownloads/download/link/id/52/
*
*/
@ -157,7 +157,7 @@
*
* Datasheet:
*
* http://www.hantronix.com/files/data/s1501799605s500-gh7.pdf
* https://www.hantronix.com/files/data/s1501799605s500-gh7.pdf
*
*/
#elif defined(LCD_ALEPHOBJECTS_CLCD_UI)

View File

@ -100,7 +100,7 @@ void inverse_kinematics(const xyz_pos_t &raw) {
/**
* Morgan SCARA Inverse Kinematics. Results in 'delta'.
*
* See http://forums.reprap.org/read.php?185,283327
* See https://reprap.org/forum/read.php?185,283327
*
* Maths and first version by QHARLEY.
* Integrated into Marlin and slightly restructured by Joachim Cerny.

View File

@ -23,7 +23,7 @@
//
// R25 = 200 kOhm, beta25 = 4338 K, 4.7 kOhm pull-up, ATC Semitec 204GT-2
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
//
const short temptable_2[][2] PROGMEM = {

View File

@ -24,7 +24,7 @@
// R25 = 100 kOhm, beta25 = 4267 K, 4.7 kOhm pull-up
// 100k ParCan thermistor (104GT-2)
// ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
const short temptable_5[][2] PROGMEM = {
{ OV( 1), 713 },

View File

@ -23,7 +23,7 @@
// R25 = 200 kOhm, beta25 = 4338 K, 1 kOhm pull-up,
// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
// Advantage: More resolution and better linearity from 150C to 200C
const short temptable_52[][2] PROGMEM = {

View File

@ -23,7 +23,7 @@
// R25 = 100 kOhm, beta25 = 4267 K, 1 kOhm pull-up,
// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
// Advantage: More resolution and better linearity from 150C to 200C
const short temptable_55[][2] PROGMEM = {

View File

@ -23,7 +23,7 @@
/**
* Alligator Board R2
* http://www.3dartists.org/
* https://reprap.org/wiki/Alligator_Board
*/
#ifndef __SAM3X8E__

View File

@ -49,7 +49,7 @@
* PWM (D 14) PD6 20| |21 PD7 (D 15) PWM
* +--------+
*
* REF http://sanguino.cc/hardware
* REF http://sanguino.wikidot.com/hardware
*/
/**
@ -70,7 +70,7 @@
*
* When installing select 1.0.2
*
* Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
* Installation instructions can be found at http://learn.sparkfun.com/pages/CustomBoardsArduino
* Just use the above JSON URL instead of Sparkfun's JSON.
*
* Once installed select the Sanguino board and then select the CPU.

View File

@ -23,7 +23,7 @@
/**
* STM32F407VET6 with RAMPS-like shield
* 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407
* 'Black' STM32F407VET6 board - https://www.stm32duino.com/viewtopic.php?t=485
* Shield - https://github.com/jmz52/Hardware
*/

View File

@ -39,7 +39,7 @@
/**
* mostly from Microsoft document fatgen103.doc
* http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
* https://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
*/
uint8_t const BOOTSIG0 = 0x55, // Value for byte 510 of boot block or MBR

View File

@ -39,7 +39,7 @@
// Version 3.01
// May 18, 2010
//
// http://www.sdcard.org/developers/tech/sdcard/pls/simplified_specs
// https://www.sdcard.org/downloads/pls/index.html
// SD card commands
uint8_t const CMD0 = 0x00, // GO_IDLE_STATE - init card in spi mode if CS low

View File

@ -66,7 +66,7 @@ The current Marlin dev team consists of:
- Chris Pepper [[@p3p](https://github.com/p3p)] - UK
- Bob Kuhn [[@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)] - USA
- João Brazio [[@jbrazio](https://github.com/jbrazio)] - Portugal
- Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands &nbsp; [![Flattr Erik](http://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
- Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands &nbsp; [![Flattr Erik](https://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
## License

View File

@ -4,7 +4,7 @@
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
# https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
@ -16,7 +16,7 @@
#
# INSTALLATION
#
# Please visit > http://docs.platformio.org/en/latest/faq.html#platformio-udev-rules
# Please visit > https://docs.platformio.org/en/latest/faq.html#platformio-udev-rules
#
#####################################################################################

View File

@ -41,6 +41,6 @@
"use_1200bps_touch": false,
"wait_for_upload_port": false
},
"url": "http://www.st.com/en/microcontrollers/stm32f407ve.html",
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407vg.html",
"vendor": "Generic"
}

View File

@ -41,6 +41,6 @@
"use_1200bps_touch": false,
"wait_for_upload_port": false
},
"url": "http://www.st.com/en/microcontrollers/stm32f407zg.html",
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407zg.html",
"vendor": "Generic"
}

View File

@ -60,6 +60,6 @@
"use_1200bps_touch": false,
"wait_for_upload_port": false
},
"url": "http://www.st.com/en/microcontrollers/stm32f407ZG.html",
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ZG.html",
"vendor": "Generic"
}

View File

@ -60,6 +60,6 @@
"use_1200bps_touch": false,
"wait_for_upload_port": false
},
"url": "http://www.st.com/en/microcontrollers/stm32f407ve.html",
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ve.html",
"vendor": "Generic"
}

View File

@ -31,6 +31,6 @@
"use_1200bps_touch": false,
"wait_for_upload_port": false
},
"url": "http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f1-series/stm32f103/stm32f103cb.html",
"url": "https://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f1-series/stm32f103/stm32f103cb.html",
"vendor": "Generic"
}

View File

@ -5,7 +5,7 @@
The original author of the following font files is [A. Hardtung](https://github.com/AnHardt).
Any copyright is dedicated to the Public Domain.
http://creativecommons.org/publicdomain/zero/1.0/
https://creativecommons.org/publicdomain/zero/1.0/
- HD44780_C.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a))
- HD44780_J.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a))
@ -20,4 +20,4 @@ Additional changes to the original font files distributed with Marlin are copyri
## Documentation
For detailed information about [adding new fonts](http://www.marlinfw.org/docs/development/fonts.html) to Marlin visit our documentation website.
For detailed information about [adding new fonts](https://www.marlinfw.org/docs/development/fonts.html) to Marlin visit our documentation website.

View File

@ -99,12 +99,12 @@ At this time, the font file `marlin-6x12-3.bdf` is used to generate the font dat
- [WQY](http://wenq.org/)
- [WQY 9pt bitmap font](http://wenq.org/daily/wqy-bitmapfont-bdf-gb18030-nightly_build.tar.gz)
- [unifont (16x8 or 16x16)](http://unifoundry.com/unifont.html)
- [unifont (16x8 or 16x16)](https://unifoundry.com/unifont.html)
Documents related to the old version of the language engine:
- [Marlin Fonts Documentation](http://www.marlinfw.org/docs/development/fonts.html)
- [Marlin LCD Language](http://marlinfw.org/docs/development/lcd_language.html)
- [Marlin Fonts Documentation](https://www.marlinfw.org/docs/development/fonts.html)
- [Marlin LCD Language](https://marlinfw.org/docs/development/lcd_language.html)
- [U8GLIB](https://github.com/olikraus/u8glib.git)
- [UTF-8 for U8GLIB](https://github.com/yhfudev/u8glib-fontutf8.git)
- [Standalone test project for the Marlin UTF-8 language engine](https://github.com/yhfudev/marlin-fontutf8.git)

View File

@ -2,10 +2,10 @@
"""Thermistor Value Lookup Table Generator
Generates lookup to temperature values for use in a microcontroller in C format based on:
http://en.wikipedia.org/wiki/Steinhart-Hart_equation
https://en.wikipedia.org/wiki/Steinhart-Hart_equation
The main use is for Arduino programs that read data from the circuit board described here:
http://reprap.org/wiki/Temperature_Sensor_v2.0
https://reprap.org/wiki/Temperature_Sensor_v2.0
Usage: python createTemperatureLookupMarlin.py [options]

View File

@ -647,7 +647,7 @@ upload_protocol = serial
#
# STM32F407VET6 with RAMPS-like shield
# 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407
# 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407
# Shield - https://github.com/jmz52/Hardware
#
[env:STM32F407VE_black]