Fix typo in G34 configuration (#15572)

This commit is contained in:
InsanityAutomation 2019-10-15 18:22:13 -04:00 committed by Scott Lahteine
parent 0ff57c640c
commit b2eda1af2f
105 changed files with 210 additions and 105 deletions

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -604,7 +604,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -607,7 +607,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -607,7 +607,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -607,7 +607,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -595,7 +595,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -608,7 +608,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -608,7 +608,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -605,7 +605,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -616,7 +616,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

View File

@ -603,7 +603,8 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } // Set number of iterations to align #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
// Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34

Some files were not shown because too many files have changed in this diff Show More