✨ BigTreeTech EBB42 v1.1 (#24964)
This commit is contained in:
alextrical
Scott Lahteine
parent
5198a55457
commit
cea2ab1d7f
@ -325,52 +325,53 @@
|
||||
#define BOARD_MKS_ROBIN_E3D 4020 // MKS Robin E3D (STM32F103RC)
|
||||
#define BOARD_MKS_ROBIN_E3D_V1_1 4021 // MKS Robin E3D V1.1 (STM32F103RC)
|
||||
#define BOARD_MKS_ROBIN_E3P 4022 // MKS Robin E3p (STM32F103VE)
|
||||
#define BOARD_BTT_SKR_MINI_V1_1 4023 // BigTreeTech SKR Mini v1.1 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V1_0 4024 // BigTreeTech SKR Mini E3 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V1_2 4025 // BigTreeTech SKR Mini E3 V1.2 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V2_0 4026 // BigTreeTech SKR Mini E3 V2.0 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V3_0 4027 // BigTreeTech SKR Mini E3 V3.0 (STM32G0B1RE)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V3_0_1 4028 // BigTreeTech SKR Mini E3 V3.0.1 (STM32F401RC)
|
||||
#define BOARD_BTT_SKR_MINI_MZ_V1_0 4029 // BigTreeTech SKR Mini MZ V1.0 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_E3_DIP 4030 // BigTreeTech SKR E3 DIP V1.0 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_BTT_SKR_CR6 4031 // BigTreeTech SKR CR6 v1.0 (STM32F103RE)
|
||||
#define BOARD_JGAURORA_A5S_A1 4032 // JGAurora A5S A1 (STM32F103ZE)
|
||||
#define BOARD_FYSETC_AIO_II 4033 // FYSETC AIO_II (STM32F103RC)
|
||||
#define BOARD_FYSETC_CHEETAH 4034 // FYSETC Cheetah (STM32F103RC)
|
||||
#define BOARD_FYSETC_CHEETAH_V12 4035 // FYSETC Cheetah V1.2 (STM32F103RC)
|
||||
#define BOARD_LONGER3D_LK 4036 // Longer3D LK1/2 - Alfawise U20/U20+/U30 (STM32F103VE)
|
||||
#define BOARD_CCROBOT_MEEB_3DP 4037 // ccrobot-online.com MEEB_3DP (STM32F103RC)
|
||||
#define BOARD_CHITU3D_V5 4038 // Chitu3D TronXY X5SA V5 Board (STM32F103ZE)
|
||||
#define BOARD_CHITU3D_V6 4039 // Chitu3D TronXY X5SA V6 Board (STM32F103ZE)
|
||||
#define BOARD_CHITU3D_V9 4040 // Chitu3D TronXY X5SA V9 Board (STM32F103ZE)
|
||||
#define BOARD_CREALITY_V4 4041 // Creality v4.x (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V422 4042 // Creality v4.2.2 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V423 4043 // Creality v4.2.3 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V425 4044 // Creality v4.2.5 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V427 4045 // Creality v4.2.7 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V4210 4046 // Creality v4.2.10 (STM32F103RC / STM32F103RE) as found in the CR-30
|
||||
#define BOARD_CREALITY_V431 4047 // Creality v4.3.1 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_A 4048 // Creality v4.3.1a (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_B 4049 // Creality v4.3.1b (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_C 4050 // Creality v4.3.1c (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_D 4051 // Creality v4.3.1d (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V452 4052 // Creality v4.5.2 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V453 4053 // Creality v4.5.3 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V521 4054 // Creality v5.2.1 (STM32F103VE) as found in the SV04
|
||||
#define BOARD_CREALITY_V24S1 4055 // Creality v2.4.S1 (STM32F103RC / STM32F103RE) v101 as found in the Ender-7
|
||||
#define BOARD_CREALITY_V24S1_301 4056 // Creality v2.4.S1_301 (STM32F103RC / STM32F103RE) v301 as found in the Ender-3 S1
|
||||
#define BOARD_CREALITY_V25S1 4057 // Creality v2.5.S1 (STM32F103RE) as found in the CR-10 Smart Pro
|
||||
#define BOARD_TRIGORILLA_PRO 4058 // Trigorilla Pro (STM32F103ZE)
|
||||
#define BOARD_FLY_MINI 4059 // FLYmaker FLY MINI (STM32F103RC)
|
||||
#define BOARD_FLSUN_HISPEED 4060 // FLSUN HiSpeedV1 (STM32F103VE)
|
||||
#define BOARD_BEAST 4061 // STM32F103RE Libmaple-based controller
|
||||
#define BOARD_MINGDA_MPX_ARM_MINI 4062 // STM32F103ZE Mingda MD-16
|
||||
#define BOARD_GTM32_PRO_VD 4063 // STM32F103VE controller
|
||||
#define BOARD_ZONESTAR_ZM3E2 4064 // Zonestar ZM3E2 (STM32F103RC)
|
||||
#define BOARD_ZONESTAR_ZM3E4 4065 // Zonestar ZM3E4 V1 (STM32F103VC)
|
||||
#define BOARD_ZONESTAR_ZM3E4V2 4066 // Zonestar ZM3E4 V2 (STM32F103VC)
|
||||
#define BOARD_ERYONE_ERY32_MINI 4067 // Eryone Ery32 mini (STM32F103VE)
|
||||
#define BOARD_PANDA_PI_V29 4068 // Panda Pi V2.9 - Standalone (STM32F103RC)
|
||||
#define BOARD_BTT_EBB42_V1_1 4023 // BigTreeTech EBB42 V1.1 (STM32G0B1CB)
|
||||
#define BOARD_BTT_SKR_MINI_V1_1 4024 // BigTreeTech SKR Mini v1.1 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V1_0 4025 // BigTreeTech SKR Mini E3 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V1_2 4026 // BigTreeTech SKR Mini E3 V1.2 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V2_0 4027 // BigTreeTech SKR Mini E3 V2.0 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V3_0 4028 // BigTreeTech SKR Mini E3 V3.0 (STM32G0B1RE)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V3_0_1 4029 // BigTreeTech SKR Mini E3 V3.0.1 (STM32F401RC)
|
||||
#define BOARD_BTT_SKR_MINI_MZ_V1_0 4030 // BigTreeTech SKR Mini MZ V1.0 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_E3_DIP 4031 // BigTreeTech SKR E3 DIP V1.0 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_BTT_SKR_CR6 4032 // BigTreeTech SKR CR6 v1.0 (STM32F103RE)
|
||||
#define BOARD_JGAURORA_A5S_A1 4033 // JGAurora A5S A1 (STM32F103ZE)
|
||||
#define BOARD_FYSETC_AIO_II 4034 // FYSETC AIO_II (STM32F103RC)
|
||||
#define BOARD_FYSETC_CHEETAH 4035 // FYSETC Cheetah (STM32F103RC)
|
||||
#define BOARD_FYSETC_CHEETAH_V12 4036 // FYSETC Cheetah V1.2 (STM32F103RC)
|
||||
#define BOARD_LONGER3D_LK 4037 // Longer3D LK1/2 - Alfawise U20/U20+/U30 (STM32F103VE)
|
||||
#define BOARD_CCROBOT_MEEB_3DP 4038 // ccrobot-online.com MEEB_3DP (STM32F103RC)
|
||||
#define BOARD_CHITU3D_V5 4039 // Chitu3D TronXY X5SA V5 Board (STM32F103ZE)
|
||||
#define BOARD_CHITU3D_V6 4040 // Chitu3D TronXY X5SA V6 Board (STM32F103ZE)
|
||||
#define BOARD_CHITU3D_V9 4041 // Chitu3D TronXY X5SA V9 Board (STM32F103ZE)
|
||||
#define BOARD_CREALITY_V4 4042 // Creality v4.x (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V422 4043 // Creality v4.2.2 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V423 4044 // Creality v4.2.3 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V425 4045 // Creality v4.2.5 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V427 4046 // Creality v4.2.7 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V4210 4047 // Creality v4.2.10 (STM32F103RC / STM32F103RE) as found in the CR-30
|
||||
#define BOARD_CREALITY_V431 4048 // Creality v4.3.1 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_A 4049 // Creality v4.3.1a (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_B 4050 // Creality v4.3.1b (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_C 4051 // Creality v4.3.1c (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_D 4052 // Creality v4.3.1d (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V452 4053 // Creality v4.5.2 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V453 4054 // Creality v4.5.3 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V521 4055 // Creality v5.2.1 (STM32F103VE) as found in the SV04
|
||||
#define BOARD_CREALITY_V24S1 4056 // Creality v2.4.S1 (STM32F103RC / STM32F103RE) v101 as found in the Ender-7
|
||||
#define BOARD_CREALITY_V24S1_301 4057 // Creality v2.4.S1_301 (STM32F103RC / STM32F103RE) v301 as found in the Ender-3 S1
|
||||
#define BOARD_CREALITY_V25S1 4058 // Creality v2.5.S1 (STM32F103RE) as found in the CR-10 Smart Pro
|
||||
#define BOARD_TRIGORILLA_PRO 4059 // Trigorilla Pro (STM32F103ZE)
|
||||
#define BOARD_FLY_MINI 4060 // FLYmaker FLY MINI (STM32F103RC)
|
||||
#define BOARD_FLSUN_HISPEED 4061 // FLSUN HiSpeedV1 (STM32F103VE)
|
||||
#define BOARD_BEAST 4062 // STM32F103RE Libmaple-based controller
|
||||
#define BOARD_MINGDA_MPX_ARM_MINI 4063 // STM32F103ZE Mingda MD-16
|
||||
#define BOARD_GTM32_PRO_VD 4064 // STM32F103VE controller
|
||||
#define BOARD_ZONESTAR_ZM3E2 4065 // Zonestar ZM3E2 (STM32F103RC)
|
||||
#define BOARD_ZONESTAR_ZM3E4 4066 // Zonestar ZM3E4 V1 (STM32F103VC)
|
||||
#define BOARD_ZONESTAR_ZM3E4V2 4067 // Zonestar ZM3E4 V2 (STM32F103VC)
|
||||
#define BOARD_ERYONE_ERY32_MINI 4068 // Eryone Ery32 mini (STM32F103VE)
|
||||
#define BOARD_PANDA_PI_V29 4069 // Panda Pi V2.9 - Standalone (STM32F103RC)
|
||||
|
||||
//
|
||||
// ARM Cortex-M4F
|
||||
|
||||
@ -533,6 +533,8 @@
|
||||
#include "stm32f1/pins_MKS_ROBIN_E3D_V1_1.h" // STM32F1 env:mks_robin_e3
|
||||
#elif MB(MKS_ROBIN_E3P)
|
||||
#include "stm32f1/pins_MKS_ROBIN_E3P.h" // STM32F1 env:mks_robin_e3p env:mks_robin_e3p_maple
|
||||
#elif MB(BTT_EBB42_V1_1)
|
||||
#include "stm32g0/pins_BTT_EBB42_V1_1.h" // STM32G0 env:BTT_EBB42_V1_1_filament_extruder
|
||||
#elif MB(BTT_SKR_MINI_V1_1)
|
||||
#include "stm32f1/pins_BTT_SKR_MINI_V1_1.h" // STM32F1 env:STM32F103RC_btt env:STM32F103RC_btt_USB env:STM32F103RC_btt_maple env:STM32F103RC_btt_USB_maple
|
||||
#elif MB(BTT_SKR_MINI_E3_V1_0)
|
||||
|
||||
153
Marlin/src/pins/stm32g0/pins_BTT_EBB42_V1_1.h
Normal file
153
Marlin/src/pins/stm32g0/pins_BTT_EBB42_V1_1.h
Normal file
@ -0,0 +1,153 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/** CAUTION **
|
||||
* This board definition is to facilitate support for a Filament Extrusion
|
||||
* devices, used to convert waste plastic into 3D printable filament.
|
||||
* This board is NOT a general 3D printing controller; it is NOT supported
|
||||
* as a toolboard via CANBUS (as it was originally designed) or any device
|
||||
* that requires kinematics.
|
||||
*/
|
||||
|
||||
#ifndef BOARD_INFO_NAME
|
||||
#define BOARD_INFO_NAME "BTT EBB42 V1.1"
|
||||
#endif
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
|
||||
#undef NO_EEPROM_SELECTED
|
||||
#ifndef FLASH_EEPROM_EMULATION
|
||||
#define FLASH_EEPROM_EMULATION
|
||||
#endif
|
||||
#define EEPROM_PAGE_SIZE (0x800UL) // 2K
|
||||
#define EEPROM_START_ADDRESS (0x0801F800UL)
|
||||
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
|
||||
#endif
|
||||
|
||||
//#define USES_DIAG_JUMPERS
|
||||
|
||||
// Ignore temp readings during development.
|
||||
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
|
||||
|
||||
#define LED_PIN PA13
|
||||
|
||||
#define I2C_SDA_PIN PB4
|
||||
#define I2C_SCL_PIN PB3
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN PB9 // SERVOS
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#if !HAS_WIRED_LCD
|
||||
#define X_STOP_PIN PB6
|
||||
#define Y_STOP_PIN PB5
|
||||
#define Z_STOP_PIN PB7
|
||||
#endif
|
||||
|
||||
//
|
||||
// Z Probe must be this pin
|
||||
//
|
||||
#define Z_MIN_PROBE_PIN PB8 // PROBE
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN -1
|
||||
#define X_STEP_PIN PA10 // Unused. Assigned so Marlin will compile
|
||||
#define X_DIR_PIN -1
|
||||
|
||||
#define Y_ENABLE_PIN -1
|
||||
#define Y_STEP_PIN PA10 // Unused. Assigned so Marlin will compile
|
||||
#define Y_DIR_PIN -1
|
||||
|
||||
#define Z_ENABLE_PIN -1
|
||||
#define Z_STEP_PIN PA10 // Unused. Assigned so Marlin will compile
|
||||
#define Z_DIR_PIN -1
|
||||
|
||||
#define E0_ENABLE_PIN PD2
|
||||
#define E0_STEP_PIN PD0
|
||||
#define E0_DIR_PIN PD1
|
||||
|
||||
#if HAS_TMC_UART
|
||||
/**
|
||||
* TMC220x stepper drivers
|
||||
* Hardware serial communication ports
|
||||
*/
|
||||
//#define E0_HARDWARE_SERIAL MSerial4
|
||||
|
||||
// This is the stable default value after testing, but, higher UART rates could be configured, remeber to test the Steppers with the M122 command to check if everything works.
|
||||
//#define TMC_BAUD_RATE 250000
|
||||
|
||||
#define E0_SERIAL_TX_PIN PA15
|
||||
#define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
|
||||
|
||||
// Reduce baud rate to improve software serial reliability
|
||||
#define TMC_BAUD_RATE 19200
|
||||
|
||||
// Default TMC slave addresses
|
||||
#ifndef E0_SLAVE_ADDRESS
|
||||
#define E0_SLAVE_ADDRESS 0b00
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PA3 // Analog Input "TH0"
|
||||
|
||||
// SPI for MAX Thermocouple
|
||||
// Uses a separate SPI bus
|
||||
|
||||
#define TEMP_0_CS_PIN PA4 // GTR K-TEMP
|
||||
#define TEMP_0_SCK_PIN PA5 // SCK
|
||||
#define TEMP_0_MISO_PIN PA6 // MISO
|
||||
#define TEMP_0_MOSI_PIN PA7 // For MAX31865
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PA2 // "HE"
|
||||
#define FAN_PIN PA0 // "FAN0"
|
||||
#define FAN1_PIN PA1 // "FAN1"
|
||||
|
||||
//
|
||||
// Default NEOPIXEL_PIN
|
||||
//
|
||||
#ifndef NEOPIXEL_PIN
|
||||
#define NEOPIXEL_PIN PD3 // LED driving pin
|
||||
#endif
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
#if HAS_WIRED_LCD
|
||||
#define BTN_EN1 PB7
|
||||
#define BTN_EN2 PB5
|
||||
#define BTN_ENC PB6
|
||||
#endif
|
||||
47
buildroot/share/PlatformIO/boards/marlin_BTT_EBB42_V1_1.json
Normal file
47
buildroot/share/PlatformIO/boards/marlin_BTT_EBB42_V1_1.json
Normal file
@ -0,0 +1,47 @@
|
||||
{
|
||||
"build": {
|
||||
"core": "stm32",
|
||||
"cpu": "cortex-m0plus",
|
||||
"extra_flags": "-DSTM32G0xx -DSTM32G0B1xx",
|
||||
"f_cpu": "64000000L",
|
||||
"framework_extra_flags": {
|
||||
"arduino": "-D__CORTEX_SC=0"
|
||||
},
|
||||
"mcu": "stm32g0b1cbt6",
|
||||
"product_line": "STM32G0B1xx",
|
||||
"variant": "MARLIN_BTT_EBB42_V1_1"
|
||||
},
|
||||
"debug": {
|
||||
"default_tools": [
|
||||
"stlink"
|
||||
],
|
||||
"jlink_device": "STM32G0B1CB",
|
||||
"onboard_tools": [
|
||||
"stlink"
|
||||
],
|
||||
"openocd_target": "stm32g0x",
|
||||
"svd_path": "STM32G0B1.svd"
|
||||
},
|
||||
"frameworks": [
|
||||
"arduino",
|
||||
"cmsis",
|
||||
"libopencm3",
|
||||
"stm32cube",
|
||||
"zephyr"
|
||||
],
|
||||
"name": "STM32G0B1CB",
|
||||
"upload": {
|
||||
"maximum_ram_size": 147456,
|
||||
"maximum_size": 131072,
|
||||
"protocol": "stlink",
|
||||
"protocols": [
|
||||
"stlink",
|
||||
"jlink",
|
||||
"cmsis-dap",
|
||||
"blackmagic",
|
||||
"mbed"
|
||||
]
|
||||
},
|
||||
"url": "https://www.st.com/content/st_com/en/products/microcontrollers-microprocessors/stm32-32-bit-arm-cortex-mcus/stm32-mainstream-mcus/stm32g0-series/stm32g0x1.html",
|
||||
"vendor": "ST"
|
||||
}
|
||||
@ -0,0 +1,377 @@
|
||||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2020, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
*******************************************************************************
|
||||
*/
|
||||
/*
|
||||
* Automatically generated from STM32G0B1C(B-C-E)Tx.xml, STM32G0B1C(B-C-E)Ux.xml
|
||||
* STM32G0C1C(C-E)Tx.xml, STM32G0C1C(C-E)Ux.xml
|
||||
* CubeMX DB release 6.0.60
|
||||
*/
|
||||
#if !defined(CUSTOM_PERIPHERAL_PINS)
|
||||
#include "Arduino.h"
|
||||
#include "PeripheralPins.h"
|
||||
|
||||
/* =====
|
||||
* Notes:
|
||||
* - The pins mentioned Px_y_ALTz are alternative possibilities which use other
|
||||
* HW peripheral instances. You can use them the same way as any other "normal"
|
||||
* pin (i.e. analogWrite(PA7_ALT1, 128);).
|
||||
*
|
||||
* - Commented lines are alternative possibilities which are not used per default.
|
||||
* If you change them, you will have to know what you do
|
||||
* =====
|
||||
*/
|
||||
|
||||
//*** ADC ***
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_ADC[] = {
|
||||
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
|
||||
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
||||
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
||||
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
||||
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
||||
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
||||
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
||||
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
||||
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
||||
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
||||
{PB_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
||||
{PB_10, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
||||
{PB_11, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
||||
{PB_12, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_IN16
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** DAC ***
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_DAC[] = {
|
||||
{PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1
|
||||
{PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** I2C ***
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_I2C_SDA[] = {
|
||||
{PA_6, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C2)},
|
||||
{PA_6_ALT1, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
|
||||
{PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
|
||||
{PA_10_ALT1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C2)},
|
||||
{PA_10_R, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
|
||||
{PA_10_R_ALT1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C2)},
|
||||
{PA_12, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)},
|
||||
{PB_4, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C2)},
|
||||
{PB_4_ALT1, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C3)},
|
||||
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
|
||||
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
|
||||
{PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)},
|
||||
{PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_I2C_SCL[] = {
|
||||
{PA_7, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C2)},
|
||||
{PA_7_ALT1, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
|
||||
{PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
|
||||
{PA_9_ALT1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C2)},
|
||||
{PA_9_R, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
|
||||
{PA_9_R_ALT1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C2)},
|
||||
{PA_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)},
|
||||
{PB_3, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C2)},
|
||||
{PB_3_ALT1, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C3)},
|
||||
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
|
||||
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
|
||||
{PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)},
|
||||
{PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** TIM ***
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_TIM[] = {
|
||||
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
|
||||
{PA_1_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 1)}, // TIM15_CH1N
|
||||
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3
|
||||
{PA_2_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 0)}, // TIM15_CH1
|
||||
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4
|
||||
{PA_3_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 2, 0)}, // TIM15_CH2
|
||||
{PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1
|
||||
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PA_6_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1
|
||||
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PA_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PA_7_ALT2, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1
|
||||
{PA_7_ALT3, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1
|
||||
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1
|
||||
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2
|
||||
{PA_9_R, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2
|
||||
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3
|
||||
{PA_10_R, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3
|
||||
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4
|
||||
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PB_0_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3
|
||||
{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PB_1_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4
|
||||
{PB_1_ALT2, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1
|
||||
{PB_3, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
{PB_3_ALT1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
|
||||
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PB_6, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
{PB_6_ALT1, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM4, 1, 0)}, // TIM4_CH1
|
||||
{PB_6_ALT2, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N
|
||||
{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM4, 2, 0)}, // TIM4_CH2
|
||||
{PB_7_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N
|
||||
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM4, 3, 0)}, // TIM4_CH3
|
||||
{PB_8_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1
|
||||
{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM4, 4, 0)}, // TIM4_CH4
|
||||
{PB_9_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1
|
||||
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3
|
||||
{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4
|
||||
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PB_13_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 1)}, // TIM15_CH1N
|
||||
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PB_14_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 0)}, // TIM15_CH1
|
||||
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PB_15_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 1)}, // TIM15_CH1N
|
||||
{PB_15_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 2, 0)}, // TIM15_CH2
|
||||
{PC_6, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3
|
||||
{PC_6_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PC_7, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4
|
||||
{PC_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PD_0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1
|
||||
{PD_1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1
|
||||
{PD_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PD_3, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PF_0, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM14, 1, 0)}, // TIM14_CH1
|
||||
{PF_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15, 1, 1)}, // TIM15_CH1N
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** UART ***
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_UART_TX[] = {
|
||||
{PA_0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
|
||||
{PA_2, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
|
||||
{PA_2_ALT1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
|
||||
{PA_4, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART6)},
|
||||
{PA_5, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
|
||||
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
|
||||
{PA_9_R, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
|
||||
{PA_14, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_LPUART2)},
|
||||
{PA_14_ALT1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
|
||||
{PB_0, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART5)},
|
||||
{PB_2, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
|
||||
{PB_3, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART5)},
|
||||
{PB_6, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_LPUART2)},
|
||||
{PB_6_ALT1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
|
||||
{PB_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
|
||||
{PB_8_ALT1, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
|
||||
{PB_11, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)},
|
||||
{PC_6, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART2)},
|
||||
{PD_3, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART5)},
|
||||
{PF_2, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_UART_RX[] = {
|
||||
{PA_1, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
|
||||
{PA_3, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
|
||||
{PA_3_ALT1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
|
||||
{PA_5, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART6)},
|
||||
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
|
||||
{PA_10_R, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
|
||||
{PA_13, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_LPUART2)},
|
||||
{PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
|
||||
{PB_0, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
|
||||
{PB_1, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART5)},
|
||||
{PB_4, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART5)},
|
||||
{PB_7, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_LPUART2)},
|
||||
{PB_7_ALT1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
|
||||
{PB_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
|
||||
{PB_9_ALT1, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PB_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)},
|
||||
{PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
|
||||
{PC_7, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART2)},
|
||||
{PD_2, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART5)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_UART_RTS[] = {
|
||||
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
|
||||
{PA_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART6)},
|
||||
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
|
||||
{PA_15, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART3)},
|
||||
{PA_15_ALT1, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
|
||||
{PB_1, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
|
||||
{PB_1_ALT1, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_LPUART2)},
|
||||
{PB_1_ALT2, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
|
||||
{PB_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
|
||||
{PB_5, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART5)},
|
||||
{PB_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)},
|
||||
{PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
|
||||
{PB_14_ALT1, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PD_2, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART3)},
|
||||
{PF_2, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_UART_CTS[] = {
|
||||
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
|
||||
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
|
||||
{PA_6_ALT1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
|
||||
{PA_6_ALT2, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART6)},
|
||||
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
|
||||
{PB_0, LPUART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_LPUART2)},
|
||||
{PB_4, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
|
||||
{PB_6, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART5)},
|
||||
{PB_7, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
|
||||
{PB_13, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)},
|
||||
{PB_13_ALT1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
|
||||
{PB_15, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** SPI ***
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SPI_MOSI[] = {
|
||||
{PA_2, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||
{PA_4, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
|
||||
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||
{PA_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
|
||||
{PA_10_R, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
|
||||
{PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||
{PB_5_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SPI3)},
|
||||
{PB_7, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
|
||||
{PB_11, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
|
||||
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SPI_MISO[] = {
|
||||
{PA_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
|
||||
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||
{PA_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_SPI2)},
|
||||
{PA_9_R, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_SPI2)},
|
||||
{PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||
{PB_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
|
||||
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||
{PB_4_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SPI3)},
|
||||
{PB_6, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_SPI2)},
|
||||
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
|
||||
{PD_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SPI_SCLK[] = {
|
||||
{PA_0, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
|
||||
{PA_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||
{PB_3_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SPI3)},
|
||||
{PB_8, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
|
||||
{PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
|
||||
{PD_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SPI_SSEL[] = {
|
||||
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||
{PA_4_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SPI3)},
|
||||
{PA_8, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
|
||||
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||
{PA_15_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SPI3)},
|
||||
{PB_0, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||
{PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
|
||||
{PD_0, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** FDCAN ***
|
||||
|
||||
#ifdef HAL_FDCAN_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_CAN_RD[] = {
|
||||
{PA_11, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN1)},
|
||||
{PB_0, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN2)},
|
||||
{PB_5, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN2)},
|
||||
{PB_8, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN1)},
|
||||
{PB_12, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN2)},
|
||||
{PD_0, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN1)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_FDCAN_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_CAN_TD[] = {
|
||||
{PA_12, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN1)},
|
||||
{PB_1, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN2)},
|
||||
{PB_6, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN2)},
|
||||
{PB_9, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN1)},
|
||||
{PB_13, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN2)},
|
||||
{PD_1, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_FDCAN1)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** No ETHERNET ***
|
||||
|
||||
//*** No QUADSPI ***
|
||||
|
||||
//*** USB ***
|
||||
|
||||
#if defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED)
|
||||
WEAK const PinMap PinMap_USB_DRD_FS[] = {
|
||||
{PA_4, USB_DRD_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USB)}, // USB_NOE
|
||||
{PA_11, USB_DRD_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DM
|
||||
{PA_12, USB_DRD_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DP
|
||||
{PA_13, USB_DRD_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USB)}, // USB_NOE
|
||||
{PA_15, USB_DRD_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USB)}, // USB_NOE
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** No SD ***
|
||||
|
||||
#endif /* !CUSTOM_PERIPHERAL_PINS */
|
||||
@ -0,0 +1,78 @@
|
||||
/* Remap pin name */
|
||||
PA_9_R = PA_9 | PREMAP,
|
||||
PA_10_R = PA_10 | PREMAP,
|
||||
|
||||
/* Alternate pin name */
|
||||
PA_1_ALT1 = PA_1 | ALT1,
|
||||
PA_2_ALT1 = PA_2 | ALT1,
|
||||
PA_3_ALT1 = PA_3 | ALT1,
|
||||
PA_4_ALT1 = PA_4 | ALT1,
|
||||
PA_6_ALT1 = PA_6 | ALT1,
|
||||
PA_6_ALT2 = PA_6 | ALT2,
|
||||
PA_7_ALT1 = PA_7 | ALT1,
|
||||
PA_7_ALT2 = PA_7 | ALT2,
|
||||
PA_7_ALT3 = PA_7 | ALT3,
|
||||
PA_9_ALT1 = PA_9 | ALT1,
|
||||
PA_9_R_ALT1 = PA_9_R | ALT1,
|
||||
PA_10_ALT1 = PA_10 | ALT1,
|
||||
PA_10_R_ALT1 = PA_10_R | ALT1,
|
||||
PA_14_ALT1 = PA_14 | ALT1,
|
||||
PA_15_ALT1 = PA_15 | ALT1,
|
||||
PB_0_ALT1 = PB_0 | ALT1,
|
||||
PB_1_ALT1 = PB_1 | ALT1,
|
||||
PB_1_ALT2 = PB_1 | ALT2,
|
||||
PB_3_ALT1 = PB_3 | ALT1,
|
||||
PB_4_ALT1 = PB_4 | ALT1,
|
||||
PB_5_ALT1 = PB_5 | ALT1,
|
||||
PB_6_ALT1 = PB_6 | ALT1,
|
||||
PB_6_ALT2 = PB_6 | ALT2,
|
||||
PB_7_ALT1 = PB_7 | ALT1,
|
||||
PB_8_ALT1 = PB_8 | ALT1,
|
||||
PB_9_ALT1 = PB_9 | ALT1,
|
||||
PB_13_ALT1 = PB_13 | ALT1,
|
||||
PB_14_ALT1 = PB_14 | ALT1,
|
||||
PB_15_ALT1 = PB_15 | ALT1,
|
||||
PB_15_ALT2 = PB_15 | ALT2,
|
||||
PC_6_ALT1 = PC_6 | ALT1,
|
||||
PC_7_ALT1 = PC_7 | ALT1,
|
||||
|
||||
/* SYS_WKUP */
|
||||
#ifdef PWR_WAKEUP_PIN1
|
||||
SYS_WKUP1 = PA_0,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN2
|
||||
SYS_WKUP2 = PC_13,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN3
|
||||
SYS_WKUP3 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN4
|
||||
SYS_WKUP4 = PA_2,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN5
|
||||
SYS_WKUP5 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN6
|
||||
SYS_WKUP6 = PB_5,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN7
|
||||
SYS_WKUP7 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN8
|
||||
SYS_WKUP8 = NC,
|
||||
#endif
|
||||
|
||||
/* USB */
|
||||
#ifdef USBCON
|
||||
USB_DM = PA_11,
|
||||
USB_DP = PA_12,
|
||||
#ifdef USB_NOE_PA_4
|
||||
USB_NOE = PA_4,
|
||||
#endif
|
||||
#ifdef USB_NOE_PA_13
|
||||
USB_NOE = PA_13,
|
||||
#endif
|
||||
#ifdef USB_NOE_PA_15
|
||||
USB_NOE = PA_15,
|
||||
#endif
|
||||
#endif
|
||||
@ -0,0 +1,185 @@
|
||||
/*
|
||||
******************************************************************************
|
||||
**
|
||||
** @file : LinkerScript.ld
|
||||
**
|
||||
** @author : Auto-generated by STM32CubeIDE
|
||||
**
|
||||
** @brief : Linker script for STM32G0B1CBTx Device from STM32G0 series
|
||||
** 128Kbytes FLASH
|
||||
** 144Kbytes RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
** Distribution: The file is distributed as is, without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
******************************************************************************
|
||||
** @attention
|
||||
**
|
||||
** Copyright (c) 2022 STMicroelectronics.
|
||||
** All rights reserved.
|
||||
**
|
||||
** This software is licensed under terms that can be found in the LICENSE file
|
||||
** in the root directory of this software component.
|
||||
** If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
**
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */
|
||||
|
||||
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||
|
||||
/* Memories definition */
|
||||
MEMORY
|
||||
{
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE
|
||||
FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET
|
||||
}
|
||||
|
||||
/* Sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code into "FLASH" Rom type memory */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data into "FLASH" Rom type memory */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data into "FLASH" Rom type memory */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab : {
|
||||
. = ALIGN(4);
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM : {
|
||||
. = ALIGN(4);
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.init_array :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.fini_array :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* Used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections into "RAM" Ram type memory */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
*(.RamFunc) /* .RamFunc sections */
|
||||
*(.RamFunc*) /* .RamFunc* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
|
||||
} >RAM AT> FLASH
|
||||
|
||||
/* Uninitialized data section into "RAM" Ram type memory */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss section */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(8);
|
||||
} >RAM
|
||||
|
||||
/* Remove information from the compiler libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
@ -0,0 +1,138 @@
|
||||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2021, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
*******************************************************************************
|
||||
*/
|
||||
|
||||
//#if defined(ARDUINO_EBB42_V1_1)
|
||||
#include "pins_arduino.h"
|
||||
|
||||
// Pin number
|
||||
const PinName digitalPin[] = {
|
||||
PA_0, // D0/A0
|
||||
PA_1, // D1/A1
|
||||
PA_2, // D2/A2
|
||||
PA_3, // D3/A3
|
||||
PA_4, // D4/A4
|
||||
PA_5, // D5/A5
|
||||
PA_6, // D6/A6
|
||||
PA_7, // D7/A7
|
||||
PA_8, // D8
|
||||
PA_9, // D9
|
||||
PA_10, // D10
|
||||
PA_11, // D11
|
||||
PA_12, // D12
|
||||
PA_13, // D13
|
||||
PA_14, // D14
|
||||
PA_15, // D15
|
||||
PB_0, // D16/A8
|
||||
PB_1, // D17/A9
|
||||
PB_2, // D18/A10
|
||||
PB_3, // D19
|
||||
PB_4, // D20
|
||||
PB_5, // D21
|
||||
PB_6, // D22
|
||||
PB_7, // D23
|
||||
PB_8, // D24
|
||||
PB_9, // D25
|
||||
PB_10, // D26/A11
|
||||
PB_11, // D27/A12
|
||||
PB_12, // D28/A13
|
||||
PB_13, // D29
|
||||
PB_14, // D30
|
||||
PB_15, // D31
|
||||
PC_6, // D32
|
||||
PC_7, // D33
|
||||
PC_13, // D34
|
||||
PC_14, // D35
|
||||
PC_15, // D36
|
||||
PD_0, // D37
|
||||
PD_1, // D38
|
||||
PD_2, // D39
|
||||
PD_3, // D40
|
||||
PF_0, // D41
|
||||
PF_1, // D42
|
||||
PF_2, // D43
|
||||
PA_9_R, // D44
|
||||
PA_10_R // D45
|
||||
};
|
||||
|
||||
// Analog (Ax) pin number array
|
||||
const uint32_t analogInputPin[] = {
|
||||
0, // A0, PA0
|
||||
1, // A1, PA1
|
||||
2, // A2, PA2
|
||||
3, // A3, PA3
|
||||
4, // A4, PA4
|
||||
5, // A5, PA5
|
||||
6, // A6, PA6
|
||||
7, // A7, PA7
|
||||
16, // A8, PB0
|
||||
17, // A9, PB1
|
||||
18, // A10, PB2
|
||||
26, // A11, PB10
|
||||
27, // A12, PB11
|
||||
28 // A13, PB12
|
||||
};
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
WEAK void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
|
||||
|
||||
/** Configure the main internal regulator output voltage
|
||||
*/
|
||||
HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI48;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV1;
|
||||
RCC_OscInitStruct.PLL.PLLN = 16;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
|
||||
| RCC_CLOCKTYPE_PCLK1;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
//#endif /* ARDUINO_EBB42_V1_1 */
|
||||
@ -0,0 +1,198 @@
|
||||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2020, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
*******************************************************************************
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* STM32 pins number
|
||||
*----------------------------------------------------------------------------*/
|
||||
#define PA0 PIN_A0
|
||||
#define PA1 PIN_A1
|
||||
#define PA2 PIN_A2
|
||||
#define PA3 PIN_A3
|
||||
#define PA4 PIN_A4
|
||||
#define PA5 PIN_A5
|
||||
#define PA6 PIN_A6
|
||||
#define PA7 PIN_A7
|
||||
#define PA8 8
|
||||
#define PA9 9
|
||||
#define PA10 10
|
||||
#define PA11 11
|
||||
#define PA12 12
|
||||
#define PA13 13
|
||||
#define PA14 14
|
||||
#define PA15 15
|
||||
#define PB0 PIN_A8
|
||||
#define PB1 PIN_A9
|
||||
#define PB2 PIN_A10
|
||||
#define PB3 19
|
||||
#define PB4 20
|
||||
#define PB5 21
|
||||
#define PB6 22
|
||||
#define PB7 23
|
||||
#define PB8 24
|
||||
#define PB9 25
|
||||
#define PB10 PIN_A11
|
||||
#define PB11 PIN_A12
|
||||
#define PB12 PIN_A13
|
||||
#define PB13 29
|
||||
#define PB14 30
|
||||
#define PB15 31
|
||||
#define PC6 32
|
||||
#define PC7 33
|
||||
#define PC13 34
|
||||
#define PC14 35
|
||||
#define PC15 36
|
||||
#define PD0 37
|
||||
#define PD1 38
|
||||
#define PD2 39
|
||||
#define PD3 40
|
||||
#define PF0 41
|
||||
#define PF1 42
|
||||
#define PF2 43
|
||||
#define PA9_R 44
|
||||
#define PA10_R 45
|
||||
|
||||
// Alternate pins number
|
||||
#define PA1_ALT1 (PA1 | ALT1)
|
||||
#define PA2_ALT1 (PA2 | ALT1)
|
||||
#define PA3_ALT1 (PA3 | ALT1)
|
||||
#define PA4_ALT1 (PA4 | ALT1)
|
||||
#define PA6_ALT1 (PA6 | ALT1)
|
||||
#define PA6_ALT2 (PA6 | ALT2)
|
||||
#define PA7_ALT1 (PA7 | ALT1)
|
||||
#define PA7_ALT2 (PA7 | ALT2)
|
||||
#define PA7_ALT3 (PA7 | ALT3)
|
||||
#define PA9_ALT1 (PA9 | ALT1)
|
||||
#define PA9_R_ALT1 (PA9_R | ALT1)
|
||||
#define PA10_ALT1 (PA10 | ALT1)
|
||||
#define PA10_R_ALT1 (PA10_R | ALT1)
|
||||
#define PA14_ALT1 (PA14 | ALT1)
|
||||
#define PA15_ALT1 (PA15 | ALT1)
|
||||
#define PB0_ALT1 (PB0 | ALT1)
|
||||
#define PB1_ALT1 (PB1 | ALT1)
|
||||
#define PB1_ALT2 (PB1 | ALT2)
|
||||
#define PB3_ALT1 (PB3 | ALT1)
|
||||
#define PB4_ALT1 (PB4 | ALT1)
|
||||
#define PB5_ALT1 (PB5 | ALT1)
|
||||
#define PB6_ALT1 (PB6 | ALT1)
|
||||
#define PB6_ALT2 (PB6 | ALT2)
|
||||
#define PB7_ALT1 (PB7 | ALT1)
|
||||
#define PB8_ALT1 (PB8 | ALT1)
|
||||
#define PB9_ALT1 (PB9 | ALT1)
|
||||
#define PB13_ALT1 (PB13 | ALT1)
|
||||
#define PB14_ALT1 (PB14 | ALT1)
|
||||
#define PB15_ALT1 (PB15 | ALT1)
|
||||
#define PB15_ALT2 (PB15 | ALT2)
|
||||
#define PC6_ALT1 (PC6 | ALT1)
|
||||
#define PC7_ALT1 (PC7 | ALT1)
|
||||
|
||||
#define NUM_DIGITAL_PINS 46
|
||||
#define NUM_REMAP_PINS 2
|
||||
#define NUM_ANALOG_INPUTS 14
|
||||
|
||||
// On-board LED pin number
|
||||
#ifndef LED_BUILTIN
|
||||
#define LED_BUILTIN PNUM_NOT_DEFINED
|
||||
#endif
|
||||
|
||||
// On-board user button
|
||||
#ifndef USER_BTN
|
||||
#define USER_BTN PNUM_NOT_DEFINED
|
||||
#endif
|
||||
|
||||
// SPI definitions
|
||||
#ifndef PIN_SPI_SS
|
||||
#define PIN_SPI_SS PA4
|
||||
#endif
|
||||
#ifndef PIN_SPI_SS1
|
||||
#define PIN_SPI_SS1 PA15
|
||||
#endif
|
||||
#ifndef PIN_SPI_SS2
|
||||
#define PIN_SPI_SS2 PB0
|
||||
#endif
|
||||
#ifndef PIN_SPI_SS3
|
||||
#define PIN_SPI_SS3 PNUM_NOT_DEFINED
|
||||
#endif
|
||||
#ifndef PIN_SPI_MOSI
|
||||
#define PIN_SPI_MOSI PA2
|
||||
#endif
|
||||
#ifndef PIN_SPI_MISO
|
||||
#define PIN_SPI_MISO PA6
|
||||
#endif
|
||||
#ifndef PIN_SPI_SCK
|
||||
#define PIN_SPI_SCK PA1
|
||||
#endif
|
||||
|
||||
// I2C definitions
|
||||
#ifndef PIN_WIRE_SDA
|
||||
#define PIN_WIRE_SDA PA6
|
||||
#endif
|
||||
#ifndef PIN_WIRE_SCL
|
||||
#define PIN_WIRE_SCL PA7
|
||||
#endif
|
||||
|
||||
// Timer Definitions
|
||||
// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin
|
||||
#ifndef TIMER_TONE
|
||||
#define TIMER_TONE TIM6
|
||||
#endif
|
||||
#ifndef TIMER_SERVO
|
||||
#define TIMER_SERVO TIM7
|
||||
#endif
|
||||
|
||||
// UART Definitions
|
||||
#ifndef SERIAL_UART_INSTANCE
|
||||
#define SERIAL_UART_INSTANCE 4
|
||||
#endif
|
||||
|
||||
// Default pin used for generic 'Serial' instance
|
||||
// Mandatory for Firmata
|
||||
#ifndef PIN_SERIAL_RX
|
||||
#define PIN_SERIAL_RX PA1
|
||||
#endif
|
||||
#ifndef PIN_SERIAL_TX
|
||||
#define PIN_SERIAL_TX PA0
|
||||
#endif
|
||||
|
||||
// Extra HAL modules
|
||||
#if !defined(HAL_DAC_MODULE_DISABLED)
|
||||
#define HAL_DAC_MODULE_ENABLED
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
// These serial port names are intended to allow libraries and architecture-neutral
|
||||
// sketches to automatically default to the correct port name for a particular type
|
||||
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
||||
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
||||
//
|
||||
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
||||
//
|
||||
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
||||
//
|
||||
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||
// pins are NOT connected to anything by default.
|
||||
#ifndef SERIAL_PORT_MONITOR
|
||||
#define SERIAL_PORT_MONITOR Serial
|
||||
#endif
|
||||
#ifndef SERIAL_PORT_HARDWARE
|
||||
#define SERIAL_PORT_HARDWARE Serial
|
||||
#endif
|
||||
#endif
|
||||
@ -13,12 +13,33 @@
|
||||
# 0 : Cortex M0+ core (0:M0, 1-2:M3, 3-4:M4, 7:M7)
|
||||
# B1 : Line/Features
|
||||
# R : 64 pins (R:64 or 66, F:20)
|
||||
# E : 512KB Flash-memory (C:256KB, D:384KB, E:512KB, G:1024KB)
|
||||
# E : 512KB Flash-memory (B:128KB C:256KB, D:384KB, E:512KB, G:1024KB)
|
||||
# T : LQFP package
|
||||
# 6 : -40...85°C (7: ...105°C)
|
||||
#
|
||||
#################################
|
||||
|
||||
#
|
||||
# This I2C2(PB3:I2C2_SCL PB4:I2C2_SDA) is used by EBB42 V1.1
|
||||
#
|
||||
[stm32g0_I2C2]
|
||||
build_flags = -DPIN_WIRE_SCL=PB3 -DPIN_WIRE_SDA=PB4
|
||||
|
||||
#
|
||||
# BigTreeTech EBB42 V1.1 (STM32G0B1CBT6 ARM Cortex-M0+)
|
||||
# This board is being used to control Filament extruders. This is not supported for 3D printing, as it has no kinematics control
|
||||
#
|
||||
[env:BTT_EBB42_V1_1_filament_extruder]
|
||||
extends = stm32_variant
|
||||
platform = ststm32@~14.1.0
|
||||
platform_packages = framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/main.zip
|
||||
board = marlin_BTT_EBB42_V1_1
|
||||
board_build.offset = 0x0000
|
||||
board_upload.offset_address = 0x08000000
|
||||
build_flags = ${stm32_variant.build_flags} ${stm32g0_I2C2.build_flags}
|
||||
upload_protocol = stlink
|
||||
debug_tool = stlink
|
||||
|
||||
#
|
||||
# BigTreeTech SKR mini E3 V3.0 (STM32G0B1RET6 ARM Cortex-M0+)
|
||||
#
|
||||
|
||||
Loading…
Reference in New Issue
Block a user