G-code Digital Buttons (#18389)

Co-Authored-By: android444 <24375898+android444@users.noreply.github.com>
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
MoellerDi 2021-03-01 15:03:41 +01:00 committed by Scott Lahteine
parent 7eace53eb7
commit f3db2551a6
3 changed files with 284 additions and 1 deletions

View File

@ -3369,6 +3369,37 @@
#define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro
#endif
/**
* User-defined buttons to run custom G-code.
* Up to 25 may be defined.
*/
//#define CUSTOM_USER_BUTTONS
#if ENABLED(CUSTOM_USER_BUTTONS)
//#define BUTTON1_PIN -1
#if PIN_EXISTS(BUTTON1_PIN)
#define BUTTON1_HIT_STATE LOW // State of the triggered button. NC=LOW. NO=HIGH.
#define BUTTON1_WHEN_PRINTING false // Button allowed to trigger during printing?
#define BUTTON1_GCODE "G28"
#define BUTTON1_DESC "Homing" // Optional string to set the LCD status
#endif
//#define BUTTON2_PIN -1
#if PIN_EXISTS(BUTTON2_PIN)
#define BUTTON2_HIT_STATE LOW
#define BUTTON2_WHEN_PRINTING false
#define BUTTON2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define BUTTON2_DESC "Preheat for " PREHEAT_1_LABEL
#endif
//#define BUTTON3_PIN -1
#if PIN_EXISTS(BUTTON3_PIN)
#define BUTTON3_HIT_STATE LOW
#define BUTTON3_WHEN_PRINTING false
#define BUTTON3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define BUTTON3_DESC "Preheat for " PREHEAT_2_LABEL
#endif
#endif
/**
* User-defined menu items to run custom G-code.
* Up to 25 may be defined, but the actual number is LCD-dependent.

View File

@ -406,6 +406,7 @@ void startOrResumeJob() {
* - Check if CHDK_PIN needs to go LOW
* - Check for KILL button held down
* - Check for HOME button held down
* - Check for CUSTOM USER button held down
* - Check if cooling fan needs to be switched on
* - Check if an idle but hot extruder needs filament extruded (EXTRUDER_RUNOUT_PREVENT)
* - Pulse FET_SAFETY_PIN if it exists
@ -498,6 +499,102 @@ inline void manage_inactivity(const bool ignore_stepper_queue=false) {
}
#endif
#if ENABLED(CUSTOM_USER_BUTTONS)
// Handle a custom user button if defined
const bool printer_not_busy = !printingIsActive();
#define HAS_CUSTOM_USER_BUTTON(N) (PIN_EXISTS(BUTTON##N) && defined(BUTTON##N##_HIT_STATE) && defined(BUTTON##N##_GCODE) && defined(BUTTON##N##_DESC))
#define CHECK_CUSTOM_USER_BUTTON(N) do{ \
constexpr millis_t CUB_DEBOUNCE_DELAY_##N = 250UL; \
static millis_t next_cub_ms_##N; \
if (BUTTON##N##_HIT_STATE == READ(BUTTON##N##_PIN) \
&& (ENABLED(BUTTON##N##_WHEN_PRINTING) || printer_not_busy)) { \
const millis_t ms = millis(); \
if (ELAPSED(ms, next_cub_ms_##N)) { \
next_cub_ms_##N = ms + CUB_DEBOUNCE_DELAY_##N; \
if (strlen(BUTTON##N##_DESC)) \
LCD_MESSAGEPGM_P(PSTR(BUTTON##N##_DESC)); \
queue.inject_P(PSTR(BUTTON##N##_GCODE)); \
} \
} \
}while(0)
#if HAS_CUSTOM_USER_BUTTON(1)
CHECK_CUSTOM_USER_BUTTON(1);
#endif
#if HAS_CUSTOM_USER_BUTTON(2)
CHECK_CUSTOM_USER_BUTTON(2);
#endif
#if HAS_CUSTOM_USER_BUTTON(3)
CHECK_CUSTOM_USER_BUTTON(3);
#endif
#if HAS_CUSTOM_USER_BUTTON(4)
CHECK_CUSTOM_USER_BUTTON(4);
#endif
#if HAS_CUSTOM_USER_BUTTON(5)
CHECK_CUSTOM_USER_BUTTON(5);
#endif
#if HAS_CUSTOM_USER_BUTTON(6)
CHECK_CUSTOM_USER_BUTTON(6);
#endif
#if HAS_CUSTOM_USER_BUTTON(7)
CHECK_CUSTOM_USER_BUTTON(7);
#endif
#if HAS_CUSTOM_USER_BUTTON(8)
CHECK_CUSTOM_USER_BUTTON(8);
#endif
#if HAS_CUSTOM_USER_BUTTON(9)
CHECK_CUSTOM_USER_BUTTON(9);
#endif
#if HAS_CUSTOM_USER_BUTTON(10)
CHECK_CUSTOM_USER_BUTTON(10);
#endif
#if HAS_CUSTOM_USER_BUTTON(11)
CHECK_CUSTOM_USER_BUTTON(11);
#endif
#if HAS_CUSTOM_USER_BUTTON(12)
CHECK_CUSTOM_USER_BUTTON(12);
#endif
#if HAS_CUSTOM_USER_BUTTON(13)
CHECK_CUSTOM_USER_BUTTON(13);
#endif
#if HAS_CUSTOM_USER_BUTTON(14)
CHECK_CUSTOM_USER_BUTTON(14);
#endif
#if HAS_CUSTOM_USER_BUTTON(15)
CHECK_CUSTOM_USER_BUTTON(15);
#endif
#if HAS_CUSTOM_USER_BUTTON(16)
CHECK_CUSTOM_USER_BUTTON(16);
#endif
#if HAS_CUSTOM_USER_BUTTON(17)
CHECK_CUSTOM_USER_BUTTON(17);
#endif
#if HAS_CUSTOM_USER_BUTTON(18)
CHECK_CUSTOM_USER_BUTTON(18);
#endif
#if HAS_CUSTOM_USER_BUTTON(19)
CHECK_CUSTOM_USER_BUTTON(19);
#endif
#if HAS_CUSTOM_USER_BUTTON(20)
CHECK_CUSTOM_USER_BUTTON(20);
#endif
#if HAS_CUSTOM_USER_BUTTON(21)
CHECK_CUSTOM_USER_BUTTON(21);
#endif
#if HAS_CUSTOM_USER_BUTTON(22)
CHECK_CUSTOM_USER_BUTTON(22);
#endif
#if HAS_CUSTOM_USER_BUTTON(23)
CHECK_CUSTOM_USER_BUTTON(23);
#endif
#if HAS_CUSTOM_USER_BUTTON(24)
CHECK_CUSTOM_USER_BUTTON(24);
#endif
#if HAS_CUSTOM_USER_BUTTON(25)
CHECK_CUSTOM_USER_BUTTON(25);
#endif
#endif
TERN_(USE_CONTROLLER_FAN, controllerFan.update()); // Check if fan should be turned on to cool stepper drivers down
TERN_(AUTO_POWER_CONTROL, powerManager.check());
@ -857,7 +954,7 @@ inline void tmc_standby_setup() {
/**
* Marlin entry-point: Set up before the program loop
* - Set up the kill pin, filament runout, power hold
* - Set up the kill pin, filament runout, power hold, custom user buttons
* - Start the serial port
* - Print startup messages and diagnostics
* - Get EEPROM or default settings
@ -1131,6 +1228,86 @@ void setup() {
SET_INPUT_PULLUP(HOME_PIN);
#endif
#if ENABLED(CUSTOM_USER_BUTTONS)
#define INIT_CUSTOM_USER_BUTTON_PIN(N) do{ SET_INPUT(BUTTON##N##_PIN); WRITE(BUTTON##N##_PIN, !BUTTON##N##_HIT_STATE); }while(0)
#if HAS_CUSTOM_USER_BUTTON(1)
INIT_CUSTOM_USER_BUTTON_PIN(1);
#endif
#if HAS_CUSTOM_USER_BUTTON(2)
INIT_CUSTOM_USER_BUTTON_PIN(2);
#endif
#if HAS_CUSTOM_USER_BUTTON(3)
INIT_CUSTOM_USER_BUTTON_PIN(3);
#endif
#if HAS_CUSTOM_USER_BUTTON(4)
INIT_CUSTOM_USER_BUTTON_PIN(4);
#endif
#if HAS_CUSTOM_USER_BUTTON(5)
INIT_CUSTOM_USER_BUTTON_PIN(5);
#endif
#if HAS_CUSTOM_USER_BUTTON(6)
INIT_CUSTOM_USER_BUTTON_PIN(6);
#endif
#if HAS_CUSTOM_USER_BUTTON(7)
INIT_CUSTOM_USER_BUTTON_PIN(7);
#endif
#if HAS_CUSTOM_USER_BUTTON(8)
INIT_CUSTOM_USER_BUTTON_PIN(8);
#endif
#if HAS_CUSTOM_USER_BUTTON(9)
INIT_CUSTOM_USER_BUTTON_PIN(9);
#endif
#if HAS_CUSTOM_USER_BUTTON(10)
INIT_CUSTOM_USER_BUTTON_PIN(10);
#endif
#if HAS_CUSTOM_USER_BUTTON(11)
INIT_CUSTOM_USER_BUTTON_PIN(11);
#endif
#if HAS_CUSTOM_USER_BUTTON(12)
INIT_CUSTOM_USER_BUTTON_PIN(12);
#endif
#if HAS_CUSTOM_USER_BUTTON(13)
INIT_CUSTOM_USER_BUTTON_PIN(13);
#endif
#if HAS_CUSTOM_USER_BUTTON(14)
INIT_CUSTOM_USER_BUTTON_PIN(14);
#endif
#if HAS_CUSTOM_USER_BUTTON(15)
INIT_CUSTOM_USER_BUTTON_PIN(15);
#endif
#if HAS_CUSTOM_USER_BUTTON(16)
INIT_CUSTOM_USER_BUTTON_PIN(16);
#endif
#if HAS_CUSTOM_USER_BUTTON(17)
INIT_CUSTOM_USER_BUTTON_PIN(17);
#endif
#if HAS_CUSTOM_USER_BUTTON(18)
INIT_CUSTOM_USER_BUTTON_PIN(18);
#endif
#if HAS_CUSTOM_USER_BUTTON(19)
INIT_CUSTOM_USER_BUTTON_PIN(19);
#endif
#if HAS_CUSTOM_USER_BUTTON(20)
INIT_CUSTOM_USER_BUTTON_PIN(20);
#endif
#if HAS_CUSTOM_USER_BUTTON(21)
INIT_CUSTOM_USER_BUTTON_PIN(21);
#endif
#if HAS_CUSTOM_USER_BUTTON(22)
INIT_CUSTOM_USER_BUTTON_PIN(22);
#endif
#if HAS_CUSTOM_USER_BUTTON(23)
INIT_CUSTOM_USER_BUTTON_PIN(23);
#endif
#if HAS_CUSTOM_USER_BUTTON(24)
INIT_CUSTOM_USER_BUTTON_PIN(24);
#endif
#if HAS_CUSTOM_USER_BUTTON(25)
INIT_CUSTOM_USER_BUTTON_PIN(25);
#endif
#endif
#if PIN_EXISTS(STAT_LED_RED)
OUT_WRITE(STAT_LED_RED_PIN, LOW); // OFF
#endif

View File

@ -183,6 +183,81 @@
#if PIN_EXISTS(JOY_EN)
REPORT_NAME_DIGITAL(__LINE__, JOY_EN_PIN)
#endif
#if PIN_EXISTS(BUTTON1)
REPORT_NAME_DIGITAL(__LINE__, BUTTON1_PIN)
#endif
#if PIN_EXISTS(BUTTON2)
REPORT_NAME_DIGITAL(__LINE__, BUTTON2_PIN)
#endif
#if PIN_EXISTS(BUTTON3)
REPORT_NAME_DIGITAL(__LINE__, BUTTON3_PIN)
#endif
#if PIN_EXISTS(BUTTON4)
REPORT_NAME_DIGITAL(__LINE__, BUTTON4_PIN)
#endif
#if PIN_EXISTS(BUTTON5)
REPORT_NAME_DIGITAL(__LINE__, BUTTON5_PIN)
#endif
#if PIN_EXISTS(BUTTON6)
REPORT_NAME_DIGITAL(__LINE__, BUTTON6_PIN)
#endif
#if PIN_EXISTS(BUTTON7)
REPORT_NAME_DIGITAL(__LINE__, BUTTON7_PIN)
#endif
#if PIN_EXISTS(BUTTON8)
REPORT_NAME_DIGITAL(__LINE__, BUTTON8_PIN)
#endif
#if PIN_EXISTS(BUTTON9)
REPORT_NAME_DIGITAL(__LINE__, BUTTON9_PIN)
#endif
#if PIN_EXISTS(BUTTON10)
REPORT_NAME_DIGITAL(__LINE__, BUTTON10_PIN)
#endif
#if PIN_EXISTS(BUTTON11)
REPORT_NAME_DIGITAL(__LINE__, BUTTON11_PIN)
#endif
#if PIN_EXISTS(BUTTON12)
REPORT_NAME_DIGITAL(__LINE__, BUTTON12_PIN)
#endif
#if PIN_EXISTS(BUTTON13)
REPORT_NAME_DIGITAL(__LINE__, BUTTON13_PIN)
#endif
#if PIN_EXISTS(BUTTON14)
REPORT_NAME_DIGITAL(__LINE__, BUTTON14_PIN)
#endif
#if PIN_EXISTS(BUTTON15)
REPORT_NAME_DIGITAL(__LINE__, BUTTON15_PIN)
#endif
#if PIN_EXISTS(BUTTON16)
REPORT_NAME_DIGITAL(__LINE__, BUTTON16_PIN)
#endif
#if PIN_EXISTS(BUTTON17)
REPORT_NAME_DIGITAL(__LINE__, BUTTON17_PIN)
#endif
#if PIN_EXISTS(BUTTON18)
REPORT_NAME_DIGITAL(__LINE__, BUTTON18_PIN)
#endif
#if PIN_EXISTS(BUTTON19)
REPORT_NAME_DIGITAL(__LINE__, BUTTON19_PIN)
#endif
#if PIN_EXISTS(BUTTON20)
REPORT_NAME_DIGITAL(__LINE__, BUTTON20_PIN)
#endif
#if PIN_EXISTS(BUTTON21)
REPORT_NAME_DIGITAL(__LINE__, BUTTON21_PIN)
#endif
#if PIN_EXISTS(BUTTON22)
REPORT_NAME_DIGITAL(__LINE__, BUTTON22_PIN)
#endif
#if PIN_EXISTS(BUTTON23)
REPORT_NAME_DIGITAL(__LINE__, BUTTON23_PIN)
#endif
#if PIN_EXISTS(BUTTON24)
REPORT_NAME_DIGITAL(__LINE__, BUTTON24_PIN)
#endif
#if PIN_EXISTS(BUTTON25)
REPORT_NAME_DIGITAL(__LINE__, BUTTON25_PIN)
#endif
#if PIN_EXISTS(CASE_LIGHT)
REPORT_NAME_DIGITAL(__LINE__, CASE_LIGHT_PIN)
#endif