Vertabreaker
b310047ded
Fix GTM32 environment (to prevent a crash)
2020-01-15 19:25:36 -06:00
Jason Smith
fc773c2784
Fix Fysetc S6 FLASH_PAGE_SIZE and test build ( #16560 )
2020-01-14 15:36:47 -06:00
InsanityAutomation
ffd8b595d1
Fix PLR cancel with ExtUI ( #16556 )
2020-01-13 20:52:24 -06:00
Bob Kuhn
1ad53cee1f
Improved STMicro L64XX stepper driver support ( #16452 )
2020-01-13 18:47:30 -06:00
Vertabreaker
51f2733b7f
Add GTM32 (STM32F103VET6) environment ( #16454 )
2020-01-12 22:27:58 -06:00
Luc
d854c8fa5f
ESP3d integration for ESP32 ( #16515 )
2020-01-10 17:22:41 -06:00
Lino Barreca
07509febcd
Fix serials available on SKR Pro 1.1 ( #16439 )
2020-01-03 21:01:42 -06:00
George Fu
ceeba58dc9
FYSETC F6 v1.4 board support ( #16321 )
2020-01-03 20:29:25 -06:00
Scott Lahteine
00e27503ce
Use a default monitor_speed of 250000
2020-01-03 19:50:55 -06:00
Scott Lahteine
f7e3a5ad85
Temporary CI fix for STM32
2020-01-03 19:31:16 -06:00
Jason Smith
a7b0b390cd
Fix PrintrBoard build (ignore TMC libraries) ( #16346 )
...
(In future try to get Teensy processors better supported by `TMCStepper`.)
2020-01-01 22:14:14 -06:00
Bob Kuhn
747b2b9bf4
Improve STEVAL_3DP001V1 and future STEVAL_* support ( #16404 )
2020-01-01 20:52:56 -06:00
thisiskeithb
a333bba725
Add Rumba32 support for PIO ( #16202 )
2019-12-22 18:08:52 -06:00
Luc
24eaf2d7e0
Some ESP32 patches ( #16297 )
2019-12-22 16:11:17 -06:00
FLYmaker
59f9bb2120
Add FLYBOARD (STM32F407ZG) ( #16257 )
2019-12-22 03:05:30 -06:00
BigTreeTech
bbe0ffb2fa
BigTreeTech SKR v1.4 support ( #16236 )
2019-12-19 02:41:35 -06:00
chzj333
42a336f8bc
Update BTT002 platform (fixing SD init) ( #16217 )
2019-12-15 12:24:54 -06:00
Luc
9d6b2ebf50
Improve ESP32 HAL (EEPROM, watchdog) ( #16228 )
2019-12-15 11:39:39 -06:00
Tanguy Pruvot
23d1801022
Update BTT comments for USB/SD Composite ( #16130 )
2019-12-11 01:47:21 -06:00
MS1987
31fdaea269
Add MKS Robin Pro, MKS Robin Lite3 ( #16163 )
2019-12-11 00:23:47 -06:00
thisiskeithb
afd865d8dd
Melzi has a 1284 ( #16090 )
2019-12-04 01:26:27 -06:00
Scott Lahteine
6134bff81b
Expand environments in platformio.ini
2019-12-02 21:19:23 -06:00
Scott Lahteine
102c9595f2
Restore STM32F103RE environment
2019-12-01 13:42:00 -06:00
Gustavo Alvarez
efc3873149
Reorder F103RE environments ( #16054 )
2019-12-01 13:17:45 -06:00
Scott Lahteine
8431af2bff
Add -fmerge-all-constants flag
2019-11-29 22:56:59 -06:00
Björn Wedi
3a88cfd992
Simplify platformio.ini with 'extends' ( #16035 )
...
- Add [env] with default settings
- Use 'extends' to shrink similar env entries
2019-11-29 05:05:46 -06:00
George Fu
cf1e19d167
Fysetc S6 support ( #15850 )
2019-11-26 16:15:03 -06:00
thisiskeithb
f786cc5145
Revert default BTT STM32F103 environment ( #16006 )
2019-11-26 04:28:13 -06:00
Bob
e7519c50b6
Include MAX31865 library ( #15969 )
2019-11-26 03:23:51 -06:00
Chris Pepper
48e264e4e1
Update platformio.ini (env:LPC176x) ( #15971 )
2019-11-23 18:43:12 +00:00
Gustavo Alvarez
b2a275891c
Support RET6 in BTT SKR Mini ( #15957 )
2019-11-21 05:09:01 -06:00
swilkens
e9bd6ef9fe
TMCStepper 0.6.x is now Marlin-compatible ( #15950 )
2019-11-19 21:06:11 -06:00
Scott Lahteine
d33ca3d058
Only TMCStepper 0.5.x is certified
2019-11-15 17:53:48 -06:00
thisiskeithb
0f57818f2d
Support 512K "RCT6" in BTT SKR Mini ( #15890 )
2019-11-15 02:51:26 -06:00
Scott Lahteine
227951a4ec
Tweak platformio.ini alignment
2019-11-13 04:29:23 -06:00
Jason Smith
9fd35c84ce
SoftwareSerialM for SKR STM32F1 boards ( #15875 )
2019-11-12 22:16:54 -06:00
Chris Pepper
8e7d1004cf
Update LPC176x platform version
2019-11-13 03:59:10 +00:00
Lino Barreca
ac71cdc265
New HardwareTimer for STM32 5.7.0 ( #15655 )
2019-11-12 19:23:02 -06:00
Chris Pepper
af61f37b65
Update lpc176x requirements ( #15869 )
2019-11-11 03:25:56 +00:00
Tanguy Pruvot
d13573c9cd
STM32F1: restore latest ststm32 version ( #15776 )
2019-11-06 16:56:35 -06:00
Jason Smith
1fe0646d25
Use modified SoftwareSerialM which works with SKR Pro ( #15796 )
2019-11-04 15:17:42 -06:00
Chris Pepper
b9116d4050
LPC176x Framework update ( #15722 )
...
Changes required for compatibility with framework-arduino-lpc176x 0.2.0
2019-11-03 02:34:09 +00:00
Scott Lahteine
a5df89eef7
Add HAL_IWDG_MODULE_ENABLED to generic F4/F7
2019-11-01 22:08:33 -05:00
Scott Lahteine
55c3929359
Group AVRx4 boards together
2019-10-29 15:59:25 -05:00
Scott Lahteine
e7b22a0ed4
Use 5.4.3 for STM32F407VE_black
2019-10-26 16:50:12 -05:00
Scott Lahteine
e0f68cda1e
Use ststm32 5.6.0 for now
2019-10-26 14:41:54 -05:00
Tanguy Pruvot
c58cc113dd
MKS Robin: restore the TFT v2.0 support (ST7789V) ( #15675 )
2019-10-25 19:30:43 -05:00
J.C. Nelson
167ecd8620
Chitu board support (e.g., Tronxy X5s) ( #15493 )
2019-10-25 17:11:25 -05:00
Tanguy Pruvot
0737b1aecf
env: SKRmini can't use STLink ( #15645 )
2019-10-24 12:30:10 -05:00
Scott Lahteine
139b7196a0
Watchdog cleanup ( #15283 )
2019-09-29 17:57:29 -05:00
Scott Lahteine
d0dd1a387e
Require a newer Neopixel
2019-09-29 17:31:06 -05:00
Tanguy Pruvot
43d6e9fa43
STM32F103.. reorganization, SKR mini fix ( #15398 )
2019-09-29 02:04:53 -05:00
Jason Smith
5f18f5bb90
Require TMCStepper >= 0.5.0 in platformio.ini ( #15382 )
2019-09-27 19:18:12 -05:00
Dave Johnson
f362dab7be
Disable PIO extra_scripts for AT90USB ( #15347 )
2019-09-25 09:37:27 -05:00
Evgeny Zyatkov
12e0581f24
SKR Pro Neopixel support ( #15274 )
2019-09-18 17:06:01 -05:00
Bas Stottelaar
c7acd5c45b
Upgrade BigTrees to latest platform ststm32 ( #15285 )
2019-09-17 05:08:47 -05:00
Scott Lahteine
6282655d77
Separate STM32F103R_bigtree_USB environment
2019-09-16 19:17:28 -05:00
Scott Lahteine
20fbb751f1
Tell externals it's Marlin
2019-09-15 03:12:44 -05:00
Tanguy Pruvot
5bf635cec2
STM32F1: Only include USBComposite if flagged ( #15243 )
2019-09-12 18:35:27 -05:00
Tanguy Pruvot
f1162243f6
STM32F1: No USBSerial without USB-serial bridge ( #15242 )
2019-09-12 17:59:31 -05:00
Scott Lahteine
dbea6f0022
STM32F1 USB cdc/msc composite device ( #15180 )
...
Co-Authored-By: bigtreetech <38851044+bigtreetech@users.noreply.github.com>
2019-09-08 02:28:22 -05:00
Giuliano Zaro
53af7cad0a
SAMD51 include u8g library ( #15165 )
2019-09-04 17:00:30 -05:00
Scott Lahteine
75efa3cdac
Reorganize HAL ( #14832 )
2019-09-02 19:49:58 -05:00
Tanguy Pruvot
d59d9b5973
Alfawise - LK1/LK2/LK4 and BLTouch ( #15118 )
2019-09-01 04:10:35 -05:00
Scott Lahteine
2aef83ddcd
Add a PlatformIO hook to alter CXXFLAGS
2019-08-29 18:06:24 -05:00
Scott Lahteine
23cffb2c21
Add an env to get the Include Tree
2019-08-29 18:06:24 -05:00
Scott Lahteine
a61c91ae9e
Use 'bugfix' branch of U8glib-HAL
2019-08-28 21:39:18 -05:00
Tanguy Pruvot
0a280f00c2
Flag unused variables without buzzer ( #15016 )
2019-08-23 22:21:30 -05:00
Tanguy Pruvot
012f577bb0
STM32F1: Import (rogerclarkmelbourne) SPI class ( #15002 )
2019-08-21 06:22:23 -05:00
Scott Lahteine
8c2cfaa907
Fix BigTree_Btt002 build
2019-08-21 04:38:04 -05:00
chzj333
0b47558a09
New board STM32F407 ( #14994 )
2019-08-20 03:05:12 -05:00
Scott Lahteine
08434b3605
Add TMC26XStepper, not ignore
2019-08-18 23:05:14 -05:00
Scott Lahteine
d2072f9ace
Clean up PlatformIO lib_ignore ( #14988 )
...
Originally from #14832 .
Users may need to delete platformio work folders before building.
2019-08-18 19:36:14 -05:00
Tanguy Pruvot
5d2519ed50
Allow use of Fysetc SoftwareSerialM ( #14893 )
2019-08-10 01:45:36 -05:00
Chris Pepper
2971b48a12
Use PlatformIO 4 default dir structure ( #14879 )
2019-08-08 08:29:33 -05:00
Giuliano Zaro
3e5620283e
AGCM4 debug option ( #14838 )
2019-08-07 00:45:00 -05:00
Scott Lahteine
ab792d004c
More PlatformIO aliases
2019-08-03 20:27:47 -05:00
George Fu
f89eb8bf35
Fysetc Cheetah updates ( #14800 )
2019-08-03 18:12:35 -05:00
Tanguy Pruvot
8efa3455c2
STM32F1: Reduce binary by 2K by dropping full path asserts ( #14807 )
2019-08-02 07:28:38 -05:00
Scott Lahteine
e85eca2630
HAL cleanup, Teensy 3.1 platform
2019-08-02 07:22:26 -05:00
Scott Lahteine
f8b8cbfc53
Press the big red button on PlatformIO 4.0
2019-07-31 15:02:11 -05:00
pinchies
d98b9d54f1
JGAurora A5S & A1 touch support ( #14768 )
2019-07-30 17:08:11 -05:00
Giuliano Zaro
290466578f
Adafruit Grand Central M4 ( #14749 )
2019-07-28 14:48:29 -05:00
thisiskeithb
d74efd9d46
MKS Robin Lite/Lite2 Board Support ( #14729 )
2019-07-27 04:43:37 -05:00
Benjamin Reed
7084f3647a
Flag to reduce Melzi binary size ( #14730 )
2019-07-27 04:36:22 -05:00
Tanguy Pruvot
f0be92259b
PIO env, Travis test for STM32F407VE ( #14674 )
2019-07-18 22:38:03 -05:00
Msq001
6920b7fe91
BigTreeTech SKR E3 DIP ( #14638 )
2019-07-18 05:43:49 -05:00
Tanguy Pruvot
45bde333d5
Initial Longer3D LK1/2 (Alfawise U20/U20+/U30) support ( #14597 )
2019-07-14 18:05:24 -05:00
Msq001
21e1148d98
Remove upload_protocol "cmsis-dap" ( #14606 )
2019-07-14 09:43:38 -05:00
Giuliano Zaro
4a5f135c5d
PIO 4 strict parser fix (1 => chain) ( #14586 )
2019-07-12 04:20:34 -05:00
Scott Lahteine
ad1c061e7b
Bring STM32F4/F7 together
2019-07-10 07:07:04 -05:00
Msq001
439e28783b
BigTree SKR Pro V1.1 board support ( #14523 )
2019-07-06 21:52:17 -05:00
Scott Lahteine
fb9d30673f
platformio.ini compatible with PIO 3.x
2019-07-01 05:40:15 -05:00
Scott Lahteine
6550a222aa
env_default => default_envs
2019-06-29 04:04:25 -05:00
thisiskeithb
8b63e3701f
MKS Robin Nano board support ( #14363 )
2019-06-27 21:33:41 -05:00
InsanityAutomation
39c0c2aebe
Add TMCStepper libs to lib_ignore for Melzi ( #14322 )
2019-06-27 16:57:38 -05:00
Msq001
e3846ec7a1
SKR mini can use 128x64 LCD ( #14388 )
2019-06-26 01:12:41 -05:00
Eric Ptak
8934b32f1b
Fysetc AIO II / Cheetah STM32F1 ( #14407 )
2019-06-26 00:40:29 -05:00
thisiskeithb
a4aa3621c0
MKS Robin Mini Board Support ( #14366 )
2019-06-24 03:42:22 -05:00
mikeshub
1b1a4677f5
Fix LCD.h compilation error ( #14377 )
2019-06-22 21:08:30 -05:00
pinchies
3021097888
Add JGAurora A5S and A1 (STM32F103ZET6) ( #14291 )
...
- Now compiles and works correctly with changes to HAL timers and watchdog.
- Does NOT include awesome work on touch screen function.
- Does have working LCD and SD-based EEPROM.
2019-06-15 14:28:22 -05:00
Tanguy Pruvot
7d1eafc80a
STM32F1: C++14 for static_assert, etc. ( #14278 )
2019-06-12 18:44:32 -05:00
felixstorm
9439fab7fd
Fix ESP32 servos, platformio.ini, etc. ( #14247 )
2019-06-10 23:22:19 -05:00
yangwenxiong
b0a4ea79b8
BigTreeTech SKR Mini v1.1 ( #14041 )
2019-06-10 21:10:51 -05:00
Tanguy Pruvot
3bf43b6c1e
Re-enable STM32F1 Travis test ( #13978 )
2019-05-11 18:10:40 -05:00
SmallSharky
1de6e7fb9d
Fix MKS Robin section in platformio.ini ( #13598 )
...
Updated ststm32 version because the old version gives build errors. Added `U8glib-HAL` to ignore list because there are also build errors.
2019-04-06 18:07:21 -05:00
Alexander Gavrilenko
3c47e1b4d1
Support Black STM32F407VET6 with RAMPS-like shield ( #13524 )
2019-04-05 15:30:19 -05:00
Scott Lahteine
cacec5764a
Clean up whitespace
2019-04-04 22:12:02 -05:00
pinchies
de0f35f2d9
Fix platformio.ini for MKS Robin ( #13502 )
2019-03-29 13:57:19 -05:00
Alexander Gavrilenko
6d9aaca082
Fix compilation error for MKS Robin ( #13506 )
2019-03-29 12:40:24 -05:00
Hadrien Jouet
0278ad0a6d
Add ESP32 WiFi interface ( #11209 )
2019-03-13 00:48:08 -05:00
Chris Pepper
8d95019442
LPC176x NeoPixel Support ( #13322 )
2019-03-06 23:54:19 +00:00
Scott Lahteine
15aa932aa6
HAL for Linux ( #13146 )
2019-02-22 19:09:10 -06:00
Simon Jouet
5cd0fa3ce1
Basic GPIO expander using the ESP32 I2S peripheral ( #12959 )
2019-02-10 05:40:31 -06:00
Thomas Moore
02ab66fca3
Update Cohesion3D Pins Files ( #13027 )
2019-01-27 23:11:33 -06:00
Bob Kuhn
2f35747f29
L6470 SPI daisy chain support ( #12895 )
2019-01-23 19:06:54 -06:00
mikeshub
7fde8d9d1e
Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support ( #12855 )
...
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
2019-01-14 14:29:55 -06:00
Chris Pepper
2919f3045d
[LPC176x] Update PIO extrascript ( #12878 )
2019-01-11 19:45:33 -06:00
Karl Andersson
8ae6f1e556
Fix errors and some compiler warnings with HAL_STM32 PlatformIO build ( #12869 )
2019-01-10 19:01:31 -06:00
Reece Kibble
7557f8d68c
Rename all Stm32f1 to STM32F1 ( #12639 )
2018-12-31 16:36:49 -06:00
jmz52
33abb86b7e
Add support for MKS Robin board ( #12650 )
...
Implement initial support for MKS Robin (STM32F103ZET6) board.
Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).
2018-12-20 17:23:27 -06:00
teemuatlut
50b2fbd031
Trinamic: Split stealthChop, improve driver monitoring, etc. ( #12582 )
2018-12-07 15:34:21 -06:00
Dave Johnson
0947b92734
Build and CI fixes and optimizations ( #12584 )
...
-Disable LDF "deep+" mode on AT90USB platforms. Appears not needed any longer (likely due to fix 7322df26ad
2018-12-05 17:21:40 -06:00
skaaj4
1980931153
Add support for FYSETC F6 V1.3 board ( #12527 )
2018-11-25 18:16:25 -06:00
Dave Johnson
8ea4eeb785
Revert #12311 PIO LDF work-around ( #12484 )
2018-11-20 00:05:01 -06:00
Chris Pepper
32880ff42a
Turn PlatformIO LDF off for LPC176x builds ( #12334 )
2018-11-04 18:32:32 -06:00
Dave Johnson
8d630362b7
Ignore ARM-based Teensy library on ATUSB90-based Teensy ( #12311 )
...
Works around PIO src_filter behavior (see https://github.com/platformio/platformio-core/issues/1905 )
2018-11-03 01:17:51 -05:00
Karl Andersson
4eb798dbdc
Add support for Arm'ed (STM32F4) board ( #12147 )
2018-10-19 14:50:52 -05:00
Christopher Pepper
61fbd0aa59
update lpc builds to use platformios ldf limited to strict mode
...
need to identify why incompatible libraries are still included without specifically disallowing them
2018-10-14 18:43:48 +01:00
Andy Shaw
870bfd08f5
usb and sdcard sharing improvements
...
* Add traceback after watchdog timeout
Add the cpability to perform a traceback following a watchdog timeout.
* Enhanced hardware SPI
Allow use of either SSP0 or SSP1.
Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware.
* Make flash emulation of eeprom the default
Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations.
* Allow sharing of SD card
SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus.
New configuration options to allow usage of the SD card to be specified.
* Fix problem with hardware SPI pins
2018-10-14 18:43:48 +01:00
Christopher Pepper
5ddf52d58e
[HAL][LPC176x] Pull out framework into separate repository
...
Framework and build platform now located at https://github.com/p3p/pio-framework-arduino-lpc176x and https://github.com/p3p/pio-nxplpc-arduino-lpc176x respectively
fix mkssbase leds
move hardware serial
remove hardware/software serial
Hardware Serial extraction
HardwareSerial ISRs
fix disabled serial2 causing Serial object to link
move usb devices out to framework
separate out adc/pwm peripheral function from hal.cpp
fix includes
remove unused pwm init
move adc
HAL header update
templated filtered adc
LPC1769 platform
2018-10-14 18:43:48 +01:00
teemuatlut
c3229e1b34
Migrate to a new TMC library ( #11943 )
2018-10-03 02:48:49 -05:00
Dave Johnson
0f7d82bab1
[2.0.x] include AVR HAL in PIO src_filter for at90usb_dfu ( #11778 )
...
I missed this one
2018-09-09 04:15:23 -05:00
Scott Lahteine
eafd62308e
Use TMC2208Stepper v0.2.5 ( #11714 )
2018-09-08 20:41:21 -05:00
Scott Lahteine
d0c96ee83e
Use TMC2208Stepper 0.2.1 for LPC1768
2018-09-01 20:03:41 -05:00
teemuatlut
49e107cea9
Restrict SW serial to AVR ( #11696 )
2018-09-01 15:24:44 -05:00
Scott Lahteine
e3debc796d
Revert "Use TMC2208Stepper version 0.2.2"
...
This reverts commit 77efcad1df
2018-08-31 17:48:41 -05:00
Scott Lahteine
77efcad1df
Use TMC2208Stepper version 0.2.2
2018-08-31 16:13:23 -05:00
Dave Johnson
0456caf0ad
Consolidate shared HALs and isolate HAL compile ( #11552 )
2018-08-20 21:11:12 -05:00
Dave Johnson
c64199941e
Compile only selected PIO environment ( #11519 )
2018-08-14 03:28:52 -05:00
Chris Pepper
b7e15a65e3
Target specific nxplpc and ststm32 pio platform versions to fix build ( #11506 )
2018-08-09 22:41:10 -05:00
forkoz
2cc950d67e
[2.0.x] MKS SBASE Trinamic examples/support ( #11402 )
2018-07-30 22:48:58 -05:00
Dave Johnson
8a24ff94d1
AT90USB1286 PIO cleanup and optimization ( #11230 )
...
-normalize `env` and `board` to lowercase naming convention.
-make board `name` follow descriptive convention.
-implement `-fsingle-precision-constant` compile optimization per https://github.com/MarlinFirmware/Marlin/pull/11178#issuecomment-401673901
-fix typo in 5DPRINT entry.
2018-07-26 05:58:28 -05:00
Roxy-3D
902167fa78
Revert "[2.0.x] Switch to PIO managed L6470 library ( #11288 )" ( #11290 )
...
This reverts commit a26fdf6b68
2018-07-17 00:23:47 -05:00
Shen Yiming
a26fdf6b68
[2.0.x] Switch to PIO managed L6470 library ( #11288 )
...
On a leap of faith... I'm merging...
2018-07-17 00:10:07 -05:00
Scott Lahteine
921685d12f
Teensy++ 2.0 can truly go away
2018-06-28 04:51:42 -05:00
Scott Lahteine
3fa9aeb5c7
Restore env:teensy20, for now
...
See https://github.com/MarlinFirmware/Marlin/pull/11079#issuecomment-399309709
2018-06-22 00:13:11 -04:00
Dave Johnson
3b7c5a31a3
Enable local board repository for PIO ( #11079 )
...
-Enable boards_dir option in PIO INI
-Remove defunct custom board file operations for PIO auto-build environment
-Remove now-defunct Teensy++ 2.0 PIO entry, replaced by `at90USB1286_DFU` and `at90USB1286_DFU` (using this entry always put AT90USB board boot loaders in jeopardy of being overwritten due to the very small size of the official Teensy++ 2.0 bootloader)
-whitespace
2018-06-21 21:09:23 -05:00
Chris Pepper
f88adcbfd5
[2.0.x][LPC176x] Fix binary linking broken by pio update ( #11026 )
2018-06-15 15:32:51 -05:00
Simon Jouet
e2aeda61ed
HAL for Espressif ESP32 Wifi
2018-06-13 19:33:35 -05:00
Karl Andersson
e0276d2f32
Official STMicroelectronics Arduino Core STM32F4 HAL compatibility ( #11006 )
2018-06-12 18:38:00 -05:00
Scott Lahteine
928e50e724
Try LiquidCrystal@1.3.4
2018-06-12 00:40:50 -05:00
Chris Pepper
f89f7c4a82
[2.0.x][LPC176x][Build] Force single precision constants, disable freestanding ( #10892 )
2018-05-28 19:38:22 -05:00
Scott Lahteine
22771dd2dd
Update 'board_f_cpu' to 'board_build.f_cpu'
2018-05-26 23:26:23 -05:00
Bob Kuhn
62e2987488
add AT90USB support & add items to popup menu ( #10779 )
2018-05-19 17:39:26 -05:00
Scott Lahteine
8f18854d4d
monitor_baud => monitor_speed
2018-05-19 16:59:23 -05:00
Scott Lahteine
7d78f3476b
Use the latest L6470 library
2018-05-11 02:26:47 -05:00
xC0000005
73022d3119
Add a PlatformIO environment for Malyan M200
2018-04-23 16:25:49 -05:00
Karl Andersson
428c54f2ad
[2.0.x] HAL for STM32F4 ( #10434 )
2018-04-17 17:33:29 -05:00
Scott Lahteine
74f4eb8312
Drop utf8 tweaks in build files
2018-04-15 14:48:47 -05:00
Yunhui Fu
c96412a78f
[2.0.x] UTF-8 language translation support ( #10213 )
2018-04-12 20:14:01 -05:00
Bob-the-Kuhn
85014cd132
[2.0.x] LPC1768 - automatic selection of upload disk ( #10374 )
2018-04-11 14:41:16 -05:00
Scott Lahteine
e6042a7c52
Tweak platformio debug_server options
2018-04-02 22:26:11 -05:00
Alexey Shvetsov
cbdc78ec0f
Fix STM32 compilation with PlatformIO ( #10245 )
2018-03-28 18:35:20 -04:00
Scott Lahteine
a891af2f7a
Enforce minimum TMC2130 / TMC2208 libs
2018-03-24 15:57:22 -04:00
etagle
c3b23974bd
Added detection of case when no unwind tables are available
2018-03-23 05:22:45 -03:00
Scott Lahteine
883524056b
Set default baudrate for the pio serial monitor
2018-03-17 19:48:06 -05:00
Scott Lahteine
73616d721a
Use the latest L6470 library (v0.6)
2018-03-17 19:28:19 -05:00
Scott Lahteine
1e946d681d
Update Marlin for newest TMC libraries
...
- TMC2130Stepper v2.2.0
- TMC2208Stepper v0.0.4
2018-03-15 22:23:31 -05:00
Scott Lahteine
4c3d7083c0
Fix DUE build in Travis CI
...
Followup to #10096
2018-03-14 00:18:40 -05:00
Bob-the-Kuhn
d194be8e8b
platformio.ini DUE native port support
2018-03-13 15:31:17 -05:00
Bob-the-Kuhn
c1f4112bdc
[2.0.x] Add 1284 support & misc. bug fixes ( #9864 )
2018-03-01 03:07:39 -06:00
Bob-the-Kuhn
f15d7bdbf2
[2.0.x] ELF improvement, fix lib_ignore ( #9793 )
...
- Compiler flags so ELF will include the original source.
- Use commit-id archives for a working `lib_ignore`.
2018-02-25 03:02:46 -06:00
Scott Lahteine
90fa423737
Preliminary cleanup of #include structure ( #9763 )
2018-02-23 00:52:52 -06:00
Scott Lahteine
f0debfd2fc
See if this passes Travis CI
2018-02-14 04:26:10 -06:00
Scott Lahteine
4fef36966b
Rename environment anet10 to melzi
2018-02-10 14:46:17 -06:00
Johnny Eshak
852468ead7
[2.0.x] Fix compile Error Anet ( #9509 )
2018-02-08 03:02:16 -06:00
teemuatlut
5c69d45f5b
[2.0.x] TMC2130 support for LPC platform ( #9114 )
2018-02-01 21:49:40 -06:00
Scott Lahteine
6e3519abae
Try to use an Neopixel library for Travis CI
2018-02-01 04:14:27 -06:00
Ivan Kravets
a994eec513
Cleanup unused options ( #9115 )
2018-01-09 18:25:16 -06:00
Bob-the-Kuhn
760dbbb734
works
...
root cause identified
2018-01-06 11:11:29 -06:00
Bob-the-Kuhn
a142fab155
Enable RRDFGSC on Due
2017-12-25 09:22:14 -06:00
Thomas Moore
45e73b72a5
Stop compiling after first five errors
2017-12-21 22:44:56 -06:00
teemuatlut
0cd1e91056
[2.0.x] TMC driver update ( #8769 )
2017-12-15 15:03:14 -06:00
Thomas Moore
50a5bb77d2
Update PlatformIO lib_deps
2017-11-16 23:23:07 -06:00
Scott Lahteine
81b91b3f9d
Clean up some trailing white-space
2017-11-10 02:31:04 -06:00
Bob-the-Kuhn
d47fbf791b
Arduini IDE compatibility changes
...
changed includes to make Arduino IDE happy
2017-11-08 20:49:49 -06:00
Bob-the-Kuhn
c388dce2b5
move U8glib-HAL
2017-11-08 14:08:09 -06:00
Bob-the-Kuhn
0483a7df91
AVR RRD works
...
LPC1768 VIKI2 & RRDFG are working
looks like all SPIs are working
library change
sh1106 locks up
fixed lockup, started I2C SW com
pretty
re-org
restore a few files
make library happy
switched HAL version of rrd
fix travis error
travis error fixes
another travis fix
cleanup
minor update
one more
correct spacing in platformio.ini
2017-11-07 18:40:29 -06:00
Alexey Shvetsov
83555933aa
Add platformio support for stm32 ( #8246 )
...
[2.0] Add platformio support for stm32
2017-11-06 23:03:59 -06:00
Thomas Moore
9e699811d2
Make LPC1768 pinmapping not specific to Re-ARM ( #8063 )
...
* Merging early because of build failures. See #8105
* Make LPC1768 pinmapping not specific to Re-ARM
* Add HAL_PIN_TYPE and LPC1768 pin features
* M43 Updates
* Move pin map into pinsDebug_LPC1768.h
* Incorporate comments and M226
* Fix persistent store compilation issues
* Update pin features
* Update MKS SBASE pins
* Use native LPC1768 pin numbers in M42, M43, and M226
2017-10-26 13:37:26 -05:00
Chris Pepper
46b2773e13
General fixes for LPC1768 ( #7834 )
...
* fixed some include paths
* LPC1768: Fix Serial API
Add missing serial methods used if TX_BUFFER_SIZE is set
Change return value of HalSerial:read to match Arduino API
* LPC1768: add filters to ADC
This is to try and compensate for hardware issue and oversensitivity to noise
* LPC1768: remove the polling section of delayMicroseconds
* LPC1768: lock usb mass storage device while device accesses it.
Currently only applicable to persistent store,
The device always has priority and will unmount the sd card from the host, Windows then tries to automount again so it can look like the explorer window freezes. Linux Mint, by default, just closes the Nemo window.
* Add timeout to make sure if Serial never connects that Marlin still boots
* Remove unneeded ifdef CPU_32_BIT
In general the need for ifdef CPU_32_BIT blocks means that something is missing from the HAL API or a Platform, in this case HAL_TICKS_PER_US was missing from the AVR Platform
* LPC1768: relocate RE-ARM debug_extra_script.py
2017-10-04 15:40:54 -05:00
Scott Lahteine
200f971ef7
Reduce Teensy++ 2.0 to a single entry
...
Followup to #7750 , #7826
2017-10-02 22:55:43 -05:00
Ralph Schmidt
1ae208395c
Remove MOTHERBOARD from "due" entry
...
Also reformat and document
2017-10-02 22:21:51 -05:00
Scott Lahteine
2d41c59320
Tweak some spacing
2017-10-01 21:59:42 -05:00
Christopher Pepper
bea3ec2724
M355 S0, S1 fixes & faster LCD, SD card
...
fix Travis error
2017-09-27 19:26:00 -05:00
Thomas Moore
ddbd4b73e0
Move LPC1768 framework out of Marlin source folder
2017-09-23 16:59:31 -05:00
Scott Lahteine
038f82cc38
Fix L6470 init and options
2017-09-21 16:26:43 -05:00
Scott Lahteine
42e2dd9251
Build file updates
2017-09-21 16:26:43 -05:00
Scott Lahteine
7e42c7563c
Move build files into place
2017-09-12 14:51:06 -05:00
Scott Lahteine
48351fd6d5
Move root sources
2017-09-06 06:28:29 -05:00
Christopher Pepper
b908e38d08
Add needed platform defined gaurds to compile with Arduino IDE
...
Also removed explicit platform HAL directory inclusion from platformio.ini to make sure these errors are caught by Travis in the future
2017-08-31 18:33:07 -05:00
Christopher Pepper
4183a249b6
Moved CMSIS and other LPC1768 dependencies
...
Fixes Arduino IDE builds for 8-bit AVR,
misc: Adafruit NeoPixel currently incompatible with Teensy 3.5-6, blacklisted
2017-08-31 18:23:44 -05:00
Christopher Pepper
d2fb3215da
PlatformIO Travis test
...
spi.h renamed to avoid conflicts with base libraries
2017-08-31 18:23:44 -05:00
Christopher Pepper
44b0c186a6
HAL for Re:ARM (LPC1768) architecture
2017-08-31 18:21:38 -05:00
teemuatlut
f3e562e46e
HAL for 32-bit Teensy (3.5, 3.6) architecture
2017-08-31 18:15:07 -05:00
Christopher Pepper
cfef925559
HAL for DUE architecture
2017-08-31 18:15:07 -05:00
Scott Lahteine
d29bf49b66
Add Sanguino 644p to ENV for PlatformIO
2017-08-23 18:32:58 -05:00
MTrab
5fa61c0ad3
Add Anet 1.0 to Platformio.ini
...
Added env:anet10 to platformio.ini for easy compile and upload to this board
2017-08-16 15:59:20 -05:00
Unknown
42aa10d263
Add PIO entry for PRINTRBOARD_REVF
...
fix from PIO corruption
2017-07-25 19:09:08 -07:00
Scott Lahteine
b378deaf89
Unify AVR90USB: fastio changes
2017-06-09 18:21:57 -05:00
Brian
f1cccd65c2
platformio.ini env_default=xxxxx has to match one of the labels in the env:xxxxx, otherwise nothing happens when you pio run
2017-05-10 07:11:13 -04:00
Scott Lahteine
fe1fce5f56
DevIoT patch 2
2017-05-09 11:28:39 -05:00
Scott Lahteine
47cae2929f
Patch platformio.ini to fix build error in DevIoT
...
For compatibility with DevIoT, until that can be solved.
2017-05-08 20:27:14 -05:00
Scott Lahteine
dca48f0e63
Move platformio.ini back to Marlin folder - it works there
2017-05-08 14:23:01 -05:00
Brian
0446dd3ad8
PlatformIO-related changes
...
- move platformio.ini out of source directory to be more consistent with 'normal' PlatformIO usage
- facilitates IDE integration
- add related .gitignores
2017-05-06 06:22:10 -04:00
