Scott Lahteine
267f77b18b
More constraint on axis_unhomed_error
2017-05-14 16:03:02 -05:00
Aaron Busca
645096b87a
Updated Basque translation
...
Updated Basque translation with new strings.
2017-05-14 18:29:50 +02:00
Roxy-3D
40d95a4e23
Update the gMax files to display better with Proportional Fonts ( #6727 )
...
Update the gMax files to display better with Proportional Fonts
2017-05-13 16:33:04 -05:00
Roxy-3D
c06af63f87
G26's default behaviour ought to be the entire mesh ( #6726 )
...
Adding the capability to specify ahead of time how much of the validation pattern to print made it so by default G26 only did one circle and no connecting lines.
It is more natural for the unsophisticated user to just do the entire mesh (bed). We default the repetition count to GRID_MAX_POINTS+1 to insure we get every last one of them!
2017-05-13 15:53:44 -05:00
Roxy-3D
15040821e0
Setup FolgerTech-i3-2020 files better for the user ( #6724 )
...
UltiPanel was enabled, but technically, it is a REPRAP_DISCOUNT_SMART_CONTROLLER
Either configuration works on the machine. But we want it 'Right'.
Setup the Proportional Font spacing so columns line up nicer on PronterFace and Repetier Host.
2017-05-13 15:14:03 -05:00
Scott Lahteine
67c9b1e332
Update M665 comment, fix M665 code_value code.
2017-05-13 05:11:29 -05:00
Scott Lahteine
37399e3cb5
Fix prepare_move_to_destination_cartesian for UBL
2017-05-13 04:13:19 -05:00
Scott Lahteine
a7fb55ea6d
Use GRID_MAX_POINTS. Some formatting
2017-05-12 06:57:19 -05:00
Scott Lahteine
e51b5774db
Merge pull request #6699 from mtowara/patch-1
...
Bugfix PRINTER_EVENT_LEDS
2017-05-12 05:58:25 -05:00
Scott Lahteine
056350d9bf
Merge pull request #6656 from FHeilmann/fix_fwretract_pos_z_move
...
Fix FWRetract with positive z-moves during retracted state
2017-05-12 05:56:08 -05:00
Scott Lahteine
0e582bcfb7
Fix #6691 - redundant line in M665
2017-05-12 05:17:38 -05:00
Markus Towara
68ae7c8d7a
Bugfix PRINTER_EVENT_LEDS
...
Extra closing curly bracket terminates while loop early if PRINTER_EVENT_LEDS defined
2017-05-12 12:13:23 +02:00
Scott Lahteine
ba29da56e0
Add disclaimer for verboten parameters
2017-05-12 02:34:53 -05:00
Scott Lahteine
0696dda470
Cleanups to UBL_DELTA
2017-05-12 02:34:53 -05:00
Scott Lahteine
cbfca29522
M421 tweaks, just to use const
2017-05-12 01:32:34 -05:00
Scott Lahteine
233f824dd6
Define GRID_MAX_POINTS
2017-05-12 01:32:34 -05:00
Scott Lahteine
b17e2d3dcd
Apply const in Marlin_main.cpp
2017-05-12 01:32:33 -05:00
Scott Lahteine
92fbea2906
Add some GCodes to the header of Marlin_main.cpp
2017-05-12 01:32:33 -05:00
Scott Lahteine
94e90ca26c
Tweak M80/M81 descriptions
2017-05-12 01:32:33 -05:00
Scott Lahteine
ee50dfaaf3
Adjust G26 arguments
2017-05-12 01:32:33 -05:00
Scott Lahteine
b0ba5cae73
Fix a spelling boo
2017-05-12 01:32:33 -05:00
oldmcg
91841d75c9
UBL_DELTA ( #6695 )
...
UBL on Delta's.... Should be close! Should not affect any Cartesian printer.
2017-05-11 22:33:47 -05:00
bgort
445003dbb8
Merge pull request #6694 from bgort/g29p2b
...
UBL: Minor improvement to G29 P2
2017-05-11 20:44:43 -04:00
Brian
5a5dba6fc8
UBL: Minor improvement to G29 P2
...
- allow H code value to override probing height
- minor cleanups
2017-05-11 18:54:34 -04:00
Brian
ae676490c9
M421: Add 'adjust closest point' capability
...
- Split M421 into separate versions for bilinear and ubl
- Fix minor issue in G26
2017-05-11 12:10:38 -04:00
Scott Lahteine
9a688d1456
Merge pull request #6682 from thinkyhead/bf_M80_s_arg
...
"M80 S" to report the state of the PSU pin
2017-05-10 20:29:01 -05:00
Roxy-3D
b63e82f309
M421 Mesh Point Offset and misc. UBL clean up ( #6685 )
...
* M421 Mesh Point Offset and misc. UBL clean up
Allow M421 to accept an offset as well as absolute value for a specified
mesh point.
And misc. UBL clean up to reduce redundent code.
* Better error checking for M421
* Fix M421 Y index bug
I just noticed.... We've had a Y index bug for who knows how long?
2017-05-10 18:54:10 -05:00
Pablo Ventura
539e0c2f31
"M80 S" to report the state of the PSU pin
2017-05-10 17:58:58 -05:00
bgort
df42428281
Merge pull request #6665 from bgort/font
...
Add proportional font adjustment ratio
2017-05-10 17:30:51 -04:00
Brian
2604742191
Add proportional font adjustment ratio
...
- update example configs
2017-05-10 17:19:03 -04:00
bgort
b3407a371b
Merge pull request #6676 from bgort/g26zhop
...
G26: Add 0.5mm Z-bump between circles to minimize pattern scraping
2017-05-10 17:12:05 -04:00
bgort
c33d99c5b2
Merge pull request #6680 from bgort/g26repeat
...
G26: Add 'Repeat' Option
2017-05-10 17:11:34 -04:00
Bob-the-Kuhn
7325035aac
Merge pull request #6637 from Tannoo/UBL_Menu_System_1.1
...
UBL Menu System 1.1
2017-05-10 15:54:48 -05:00
Brian
f7a201b0d0
G26: Add 'Repeat' Option
...
- Allows for specifying number of points to print/validate, using 'R' code like with G29 P4 Rx
- Moved the code for Random to 'M' so we could be consistent with G29 P4
- G26 instructions indenting/cleanup
2017-05-10 16:52:08 -04:00
Brian
9c5957fc77
G26: Add 0.5mm Z-bump between circles to minimize pattern scraping
2017-05-10 16:11:59 -04:00
Brian
4da14b14f4
UBL Cleanup/Bugfix
...
- Fix bug in ubl_line_to_destination
- Improve/fix output of some ubl.h functions
2017-05-10 13:56:17 -04:00
Tannoo
66db6c3acc
UBL Menu System 1.1
...
/**
* UBL System submenu
*
* Prepare
* - Unified Bed Leveling
* - Activate UBL
* - Deactivate UBL
* - Mesh Storage
* Memory Slot:
* Load Bed Mesh
* Save Bed Mesh
* - Output Map
* Map Type:
* Output Bed Mesh Host / Output Bed Mesh CSV
* - UBL Tools
* - Build Mesh
* Build PLA Mesh
* Build ABS Mesh
* - Build Custom Mesh
* Hotend Temp:
* Bed Temp:
* Build Custom Mesh
* Info Screen
* - Build Cold Mesh
* - Fill-in Mesh
* Fill-in Mesh
* Smart Fill-in
* Manual Fill-in
* Info Screen
* Continue Bed Mesh
* Invalidate All
* Invalidate Closest
* - Validate Mesh
* PLA Mesh Validation
* ABS Mesh Validation
* - Custom Mesh Validation
* Hotend Temp:
* Bed Temp:
* Validate Mesh
* Info Screen
* - Edit Mesh
* Fine Tune All
* Fine Tune Closest
* - Adjust Mesh Height
* Height Amount:
* Adjust Mesh Height
* Info Screen
* - Mesh Leveling
* 3-Point Mesh Leveling
* - Grid Mesh Leveling
* Side points:
* Level Mesh
* Info Screen
* - Output UBL Info
*/
2017-05-10 12:14:43 -05:00
Brian
3b0127cf8e
Fix compiler complaint related to M100
2017-05-09 21:45:44 -04:00
Scott Lahteine
11104f177b
Apply const in BABYSTEPPING
2017-05-09 12:37:23 -05:00
Scott Lahteine
081bf1f879
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
Scott Lahteine
a9487c9443
Reduce redundancy in BLTOUCH conditionals
2017-05-09 11:52:24 -05:00
Scott Lahteine
8d961b51cc
Eliminate M100 compiler warnings?
2017-05-09 11:32:15 -05:00
bgort
efb9ce24d9
Merge pull request #6645 from tcm0116/bltouch_config
...
Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch
2017-05-09 09:49:16 -04:00
bgort
e2f07917ab
Merge pull request #6644 from tcm0116/bltouch_menu
...
Move BLTouch LCD menu from Main to Main/Control
2017-05-09 09:49:02 -04:00
Florian Heilmann
fe96376a73
Fix FWRetract with positive z-moves during retracted state
2017-05-09 13:54:57 +02:00
Scott Lahteine
47cae2929f
Patch platformio.ini to fix build error in DevIoT
...
For compatibility with DevIoT, until that can be solved.
2017-05-08 20:27:14 -05:00
Scott Lahteine
911a87e006
Disable SCARA feedrate scaling by default
2017-05-08 14:41:03 -05:00
Scott Lahteine
71396f77d3
Cleanups following recent commits
2017-05-08 14:23:01 -05:00
Scott Lahteine
dca48f0e63
Move platformio.ini back to Marlin folder - it works there
2017-05-08 14:23:01 -05:00
Scott Lahteine
a6dafb058e
Small reduction in error code size
2017-05-08 13:58:09 -05:00
Scott Lahteine
a1e04942a2
Cleanup to software PWM variables
2017-05-08 13:51:45 -05:00
Thomas Moore
a20d0794e6
Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch
2017-05-08 16:28:44 +00:00
Thomas Moore
3279337f47
Move BLTouch LCD menu from Main to Main/Control
2017-05-08 15:21:01 +00:00
Brian
6cb0fa4128
Cleanup previous implementation of new quiet probing
...
Saves a few lines of code.
2017-05-08 08:13:46 -04:00
bgort
4b7f8ad9c6
Merge pull request #6610 from bgort/pio-improvements2
...
PlatformIO-related changes
2017-05-08 07:52:42 -04:00
Scott Lahteine
56ca47ab9d
Patch configuration temp units
2017-05-07 21:32:01 -05:00
Scott Lahteine
421dd62800
Adjust spacing of "spaces"
2017-05-07 21:28:54 -05:00
Scott Lahteine
26dba44cd3
Patch redundant lcd settings
2017-05-07 21:28:54 -05:00
Scott Lahteine
34b5041576
Spacing adjustment, ubl_G29
2017-05-07 21:28:54 -05:00
Scott Lahteine
1c4ed8b106
Note 5 extruders in config comments
2017-05-07 21:28:54 -05:00
Scott Lahteine
6e4a5cc8c6
Patch missing const in temp_abs
2017-05-07 21:13:44 -05:00
bgort
d35e2fda10
Merge pull request #6622 from bgort/silentprobing
...
Improve BLTOUCH_HEATERS_OFF functionality
2017-05-07 21:33:44 -04:00
Scott Lahteine
6ed52fb765
Adjust spacing in LSF
2017-05-07 19:11:52 -05:00
Roxy-3D
110afff415
More misc UBL fixes and update gMax examples ( #6632 )
...
I think I forgot to Sync before I committed last time. Some UBL
changes did not stick.
Also, update the gMax configuaration.h file so other than unique numbers
and settings, it exactly matches the default configuration.h file.
2017-05-07 19:02:24 -05:00
Roxy-3D
d92fa40c62
misc. UBL fixes ( #6631 )
...
* Restore LSF functionality
Some of the typo's persisted... Hopefully this gets them all fixed.
* Restore user's expectations of how G28 should behave
* Allow Nozzle size control with ornery host programs
2017-05-07 18:23:48 -05:00
Brian
faa270071d
Improve BLTOUCH_HEATERS_OFF functionality
...
- rename to PROBING_HEATERS_OFF
- move heater pausing functionality into thermalManager
- add variables, pause(), ispaused(), other functions
- add fan pausing functionality -> PROBING_FANS_OFF
- add probing_pause() wrapper
- move pausing into do_homing_move() and do_probe_move() to minimize quiet time and so other probe types can benefit
- example configs
2017-05-07 16:22:08 -04:00
lrpirlet
d66e9efac5
G29 P1 stops reporting Invalid location with this patch
2017-05-07 15:07:26 +02:00
Scott Lahteine
ce507deb9f
Support temperature units in M503
2017-05-06 20:24:51 -05:00
bgort
a59066bca9
Various improvements - mostly UBL-related ( #6607 )
...
UBL Clean up.
2017-05-06 18:59:16 -05:00
Brian
0446dd3ad8
PlatformIO-related changes
...
- move platformio.ini out of source directory to be more consistent with 'normal' PlatformIO usage
- facilitates IDE integration
- add related .gitignores
2017-05-06 06:22:10 -04:00
Scott Lahteine
77769e284f
Edit configuration comments
2017-05-05 13:32:31 -05:00
Scott Lahteine
6876e79d42
Tweak command index increment
2017-05-05 13:32:31 -05:00
Scott Lahteine
7fcb5c1424
Minor fix in K8200 readme
2017-05-05 11:25:11 -05:00
Max Matveev
267f3a03d9
Fixed USE_CONTROLLER_FAN #define usage
2017-05-04 23:38:29 +02:00
bgort
ae7c602031
fix error in M105 output -- use SERIAL_PROTOCOL for ints instead of SERIAL_PROTOCOL_F ( #6584 )
...
also removed wayward 'address of' ampersand in setTargetHotend and setTargetBed parameters
2017-05-04 16:09:45 -05:00
Scott Lahteine
3cd9af2409
bugfix-1.1.x ReadMe, Version, helper scripts
2017-05-04 07:17:10 -05:00
Florian Heilmann
15268770f5
Fix broken fwretract recovery extruder feedrate
...
When both lowering and recovery are performed using the same "prepare_move_to_destination()" the extruder recovery feedrate ends up being ignored and, instead, is only capped by either the maximum e-speed or the time it takes to perform the z-lowering.
Performing the two moves separately from each other ensures a correct recovery feedrate.
2017-05-04 11:34:28 +02:00
Scott Lahteine
58210c3a19
Merge pull request #6568 from thinkyhead/rc_bilinear_extension
...
Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling
2017-05-04 00:46:05 -05:00
Scott Lahteine
da08e11acd
Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling
2017-05-04 00:19:07 -05:00
Scott Lahteine
6834e36871
Merge pull request #6567 from thinkyhead/rc_sdcard_stop
...
Shutdown heaters, autotemp on SD Cancel
2017-05-03 23:54:29 -05:00
Scott Lahteine
399efd66ed
Click to resume
2017-05-03 22:26:06 -05:00
Scott Lahteine
1196e3ca59
SDCard print completion can use "M0"
2017-05-03 22:24:03 -05:00
Scott Lahteine
6854f08d22
Shut down autotemp in disable_all_heaters
2017-05-03 20:54:26 -05:00
Thomas Moore
acec237092
Shutdown heaters and fan after canceling a print from the SD card
2017-05-03 20:43:09 -05:00
Scott Lahteine
11b6a3cbb6
Fix regression in least_squares_fit.cpp
2017-05-03 19:21:44 -05:00
Scott Lahteine
e1b85ff67b
Merge pull request #6559 from thinkyhead/rc_more_optimal
...
Compact smart_fill_mesh slightly
2017-05-03 19:07:36 -05:00
Scott Lahteine
9890141f7b
M100 tweak
2017-05-03 17:28:09 -05:00
Scott Lahteine
2658cc707a
Treat temperature as integer, when possible
2017-05-03 17:27:25 -05:00
Scott Lahteine
1b2c7ec20a
Make G26 compatible with inches and thermal unit modes
2017-05-03 17:12:48 -05:00
Scott Lahteine
241bdffe65
Dress up Bilinear Leveling code
2017-05-03 17:12:35 -05:00
Scott Lahteine
67ecf06cc4
Patch issue in gcode_M900
...
Noted in #6550
2017-05-03 15:26:00 -05:00
Scott Lahteine
de5e485ed7
Explicit upward angle solution
2017-05-03 01:19:44 -05:00
Scott Lahteine
ecdf68735f
Compact smart_fill_mesh slightly
2017-05-03 01:06:58 -05:00
Scott Lahteine
628391304f
Merge pull request #6552 from thinkyhead/rc_more_ubl_cleanup
...
Further cleanup of UBL
2017-05-02 22:46:04 -05:00
Scott Lahteine
902fe76db9
Merge pull request #6556 from thinkyhead/rc_use_controller_fan
...
Implement USE_CONTROLLER_FAN as a feature
2017-05-02 22:43:26 -05:00
Scott Lahteine
7ba7474a73
Drop extra parens from address-of operator
2017-05-02 22:22:23 -05:00
Scott Lahteine
0bf5add075
Use UBL_MESH_(MIN|MAX)_[XY] for G29 move limits
2017-05-02 22:22:23 -05:00
Scott Lahteine
b8ba3b7647
Use 'sq' macro where possible
2017-05-02 22:22:23 -05:00
Scott Lahteine
66eba3346b
Remove G29 lcd control debugging
2017-05-02 22:22:23 -05:00
Scott Lahteine
3517154135
Reduce code size, fix bug in smart_fill_mesh
2017-05-02 22:22:23 -05:00