Commit Graph

270 Commits

Author SHA1 Message Date
Scott Lahteine
da9d4c4caf Merge pull request #3206 from esenapaj/patch-5
Follow-up the PR #3082, etc
2016-03-24 00:20:25 -07:00
esenapaj
fc75e6f92d Follow-up the PR #3082, etc
Follow-up the PR #3082
Follow-up the commit 143ad74: unnoticed updates
Fix for commit b0f5ba0: Z offset: -front [of the nozzle] +behind -> Y offset: -front [of the nozzle] +behind
Standardize the writing method: Z-probe, z-probe -> Z Probe
Adjust spacing
2016-03-22 20:22:01 +09:00
esenapaj
22299c13c1 Change link to the document
documentation/LCDLanguageFont.md moved to http://www.marlinfirmware.org/ at commit 12d0983757,
but http://www.marlinfirmware.org/ isn't working.
2016-03-22 19:58:41 +09:00
Scott Lahteine
be08eb6153 Merge pull request #3194 from jbrazio/feature/add-pt_pt-utf8
Add pt_pt-utf8 language pack and fix some minor compiler warnings
2016-03-20 17:42:45 -07:00
Scott Lahteine
d1ff7959b7 Merge pull request #3188 from esenapaj/patch-1
follow-up the commit b82d91e
2016-03-20 17:39:52 -07:00
Scott Lahteine
1cc316f1fd Merge pull request #3082 from thinkyhead/updated_2820
This is quite comprehensive. If probes are disabled in any case when they shouldn't be, I'm sure we will hear about it soon.
2016-03-20 17:10:38 -07:00
jbrazio
1aa531a3db Missing coma comment correction for all config files 2016-03-20 23:21:45 +00:00
jbrazio
68dda08fff Added pt_pt-utf8 language pack; Fixed some minor compiler warnings; Harmonize file suffix for the current existing UTF8 language packs; Updated all configuration files to reflect the new language packs 2016-03-20 23:14:24 +00:00
esenapaj
468df96b0f follow-up the commit b82d91e
follow-up the commit b82d91eca6
2016-03-20 20:57:14 +09:00
Scott Lahteine
32f75749e4 Merge pull request #3117 from Blue-Marlin/thermal-protection
Improve the descriptions for THERMAL_PROTECTION
2016-03-19 23:41:05 -07:00
esenapaj
37eaa1406b follow-up the PR #3180 2016-03-20 15:33:02 +09:00
esenapaj
198d5d56fd follow-up the PR #3183 2016-03-20 13:58:05 +09:00
Blue-Marlin
3166aed087 Improve the descriptions for THERMAL_PROTECTION 2016-03-19 14:08:59 +01:00
AnHardt
3f45a1acf9 Check probes only when deployed
Aim: Test probes in update_endstops only when activated

Changes:
Configurations
 Add define for FIX_MOUNTED_PROBE to handle the situation where formerly ENDSTOPS_ONLY_FOR_HOMING had to be set, or lowering the nozzle below Z_PROBE_OFFSET_FROM_EXTRUDER could give an "endstop hit" message.
 Add define for Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to indicate a common situation, that we have a probe but it is connected to an endstop pin
 Add some comments
 Shift some entries to have related things together.

Conditionals.h
 We have a probe (HAS_Z_MIN_PROBE) if one of the pins is defined AND one of the probes is defined.

SanityCheck.h
 Add some tests if the probe is connected and if we have defined a probe.

stepper.cpp
 Changes to test the probe only when it is deployed (z_probe_is_active).
 Test update_endstops() when the probe is deployed.

MarlinMain.cpp
 a. set and reset z_probe_is_active in deploy_z_probe(), stow_z_probe() and dock_sled()
 b. set and reset z_probe_is_active in the case a z-servo is moved to a defined position. The only remaining unhandled servo move is in M280 where we do not end in a defined position. If you want to handle a probe use M401/402
 c. skip deploying/stowing when already deployed/stowed in the dedicated deploy/stow functions.
 d. Handle the new FIX_MOUNTED_PROBE in parallel to a servo driven probe/endstop.

 To do: In another PR. handle all probes in deploy/stow_z_probe.
 Sort out SERVO_LEVELING vs. HAS_SERVO_ENDSTOPS.
2016-03-19 02:00:08 -07:00
Scott Lahteine
7ec7bb31c4 Send a Busy signal to hosts during long processes, wait for input, etc
If Marlin is blocking the serial input or command queue for any length
of time (for example more than 2 seconds), it needs to send a message
to serial out to inform the host that it is busy. Marlin should only
send these messages out when busy, and preferably not when trying to
print formatted output.
2016-03-18 22:38:35 -07:00
Scott Lahteine
b8b51d8da8 Add the REVERSE_MENU_DIRECTION option 2016-03-16 04:02:40 -07:00
Scott Lahteine
1c384930f3 Merge pull request #3140 from thinkyhead/rc_fix_macro_expansion
Wrap macros to prevent bad expansions
2016-03-15 00:25:34 -07:00
Scott Lahteine
30c3a21d1f Merge pull request #3112 from thinkyhead/rc_support_MAX31855 2016-03-13 03:30:48 -07:00
Scott Lahteine
f9ded2a7c4 Wrap macros to prevent bad expansions 2016-03-12 22:38:55 -08:00
Scott Lahteine
27f244ba2c Support MAX31855 as Temperature Sensor -3 2016-03-10 02:49:54 -08:00
Scott Lahteine
ce639b8b03 Group FILAMENT_SENSOR options together 2016-03-10 02:41:37 -08:00
AnHardt
fd5414c6ea Z_RAISE_BEFORE_HOMING -> MIN_Z_HEIGHT_FOR_HOMING
rebased
corrected spelling
changed to #elif for error

Still with MIN_Z_HEIGHT_FOR_HOMING but con be done with (folder wide) search-replace when we have a better name.
2016-03-08 17:50:23 +01:00
esenapaj2
29e09c7c3e update example configurations
update old comments
update or delete deprecated definitions
complement forgotten updates
adjust spacing
some cosmetic changes
2016-03-07 22:03:33 +09:00
Scott Lahteine
cf792fd8d8 Update configurations to use RAMPS 1.4 2016-03-06 05:52:01 -08:00
Scott Lahteine
13ef12ad3f Fix power calculations
As suggested by @max-pau in #3073 - #3074
2016-03-06 05:51:59 -08:00
Scott Lahteine
5cba0210f2 Small patch to Z_SAFE_HOMING comment 2016-03-06 05:51:58 -08:00
jbrazio
143ad74db7 Update PROBE_OFFSET_FROM_EXTRUDER comment section in all example config
files.
2016-03-06 05:51:58 -08:00
Scott Lahteine
e7cf85b922 Merge pull request #3013 from thinkyhead/esenapaj-patch-1
Enhanced #3010 - formal Mesh/Manual dependency
2016-03-06 00:30:02 -08:00
Scott Lahteine
eb85342fd9 Merge pull request #2989 from AnHardt/fix2661
Pre home display - Stepper release
2016-03-05 21:30:17 -08:00
Scott Lahteine
772460a7b8 Various minor spelling corrections
Redo of #2939 rebased against RCBugFix
2016-03-05 20:41:15 -08:00
AnHardt
615bec2329 Activate warning about possible reduced accuracy by default
Renamed `WARN_REDUCED_ACCURACY` to `DISABLE_REDUCED_ACCURACY_WARNING`

Changed the condition for blinking from
```
#if ENABLED(WARN_REDUCED_ACCURACY)
```
to
```
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
```
2016-02-28 23:20:21 +01:00
AnHardt
4b02f33e69 Distribute config-changes to the other configurations 2016-02-28 23:20:04 +01:00
Scott Lahteine
c2e5c6c12c Nest Manual Bed Leveling options
This formalizes the dependency of MANUAL_BED_LEVELING on
MESH_BED_LEVELING
2016-02-20 20:35:10 -08:00
Scott Lahteine
b19b272172 Update configurations with SPI_SPEED
- Include aligned comment about new SDSUPPORT behavior
2016-02-17 14:54:09 -08:00
Scott Lahteine
159ff94afd Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977 2016-02-07 08:02:11 -06:00
Ruwan J Egoda Gamage
b58083b0fa Getting rid of SDEXTRASLOW, SDSLOW variables. 2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage
1b7c443628 Adding SDULTRASLOW variable.
Instead of changing SDEXTRASLOW variable to a slower speed,  the new
SDULTRASLOW is used for rigidbot panel.
2016-02-07 07:58:52 -06:00
Richard Wackerbarth
0b429461d5 Back port Cosmetic changes 2015-12-10 07:20:52 -06:00
Richard Wackerbarth
e7b40bbe98 Change link to U8glib source 2015-12-10 06:33:29 -06:00
Scott Lahteine
9b23490f01 Clean up spacing in configs 2015-11-12 00:03:21 -06:00
Richard Wackerbarth
e01f5e1ef7 Cleanup 2015-09-17 10:44:23 -05:00
Mike Cochrane
5e36b64635 SDEXTRASLOW for some SD card readers (PR#176)
Add SDEXTRASLOW which runs the SD card at SPI_QUARTER_SPEED. Quarter speed is needed for RIGIDBOT_PANEL
2015-09-14 07:58:08 -05:00
Richard Wackerbarth
6292d9e815 Rename ENABLE_AUTO_BED_LEVELING
With the introduction of the #if ENABLED(…)

reads better than
2015-08-27 20:52:08 -05:00
Christian Lefrançois
9897a9147c Update ABL comments (PR#95)
* Updates the auto bed leveling comments ONLY.
* Renames "Z probe" word usage in //comments and #errors properly.
2015-08-26 05:51:38 -05:00
Christian Lefrançois
a7822e3ff7 Some renaming of Z_PROBE to Z_MIN_PROBE (PR#91)
* Fix a couple of renames omission and macro expansion errors.
2015-08-20 06:04:46 -05:00
AnHardt
e2d69f66b2 Make Z_PROBE a Z_MIN_PROBE (PR#65)
Currently we use the probe exclusively as a device to find the build platform(bed).
For the currently supported setups this means, we use it as a additional min-endstop.
A triggered when not deployed probe disturbs the homing process for max-endstops.

Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE
Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP
Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Adjust comments accordingly
Remove Z_MAX  check for the probe in update_endstops().

Using an delta related idea of @clefranc from #61,
extended to the general change for all setups.

Tested with Prusa i3, max-z-endstop and permanently triggered z-probe.
Worked for @clefranc's delta.
2015-08-11 14:41:36 -05:00
Scott Lahteine
46453905d6 Apply remaining ENABLED/DISABLED conditionals 2015-08-03 16:04:48 -05:00
Richard Wackerbarth
b227d8c128 Supply a VERSION in a short form for displays
The long descriptor will still be available in M115
2015-08-03 08:21:09 -05:00
Richard Wackerbarth
329acc852e Canonize Option flag USE_AUTOMATIC_VERSION 2015-08-03 08:08:37 -05:00
AnHardt
80f2a20842 Enable bootscreen in all Configurations 2015-08-03 07:13:00 -05:00
Scott Lahteine
1e2deff4fd Rename BTENABLED to BLUETOOTH
- For some reason it’s easy to forget what BT stands for, but it
doesn’t need an abbreviation.
2015-08-02 22:56:50 -05:00
Scott Lahteine
270c766de2 SDCARDDETECT -> SD_DETECT, added docs
- `SD_DETECT_PIN` replaces `SDCARDDETECT`
- `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED`
- Revise the description of `SD_DETECT_INVERTED`
- Add a note about the override of `SD_DETECT_INVERTED` in
`Conditionals.h`
2015-08-02 21:59:41 -05:00
Scott Lahteine
37d1879386 Apply overridables to Configuration files 2015-07-31 00:03:36 -05:00
Scott Lahteine
edaaead7e0 Fix comment about SERVO_ENDSTOP_ANGLES 2015-07-30 23:35:57 -05:00
Scott Lahteine
0af2a80e06 Make SERVO_ENDSTOP_ANGLES 2-dimensional 2015-07-30 16:38:56 -05:00
AnHardt
fd0e81b0c7 Distinguish between BUZZER and SPEAKER (PR#2513)
A speaker needs a AC or a pulsed DC to make a sound, a buzzer only needs a DC.
A buzzer has it's own resonator. It works in most cases to feed the buzzer with a pulsed DC, but the sound will not be as loud as with pure DC.

There seem to be boards where the BEEPER-pin is not able to handle a PWM. Obviously intended for a buzzer.
To make these board able to handle a speaker

* replace the PWM based tone()-function again with a on-delay-off-delay loop.

Hopefully the last time I touch the beeper code.
2015-07-24 22:10:04 -05:00
AnHardt
8b876241bd Some more servo code tweaks
Just set up the pin. Don't move to a random position.

Simplify servo::move()
* servo::move() does not need the pin parameter - The pin is set during servo_init() with attach().
* servo::move() does not need a return value.

SERVO_LEVELING is the wrong condition to deactivate the servos.

Remove some temporary (Servo *) variables.
SanityCheck for the servo indexes.
2015-07-24 22:04:49 -05:00
Scott Lahteine
90f8ddfc1e Apply MINIPANEL to other configs 2015-07-23 22:51:41 -05:00
Scott Lahteine
d85861d296 Move macros, add ENABLED/DISABLED, add includes 2015-07-22 18:16:05 -05:00
Scott Lahteine
129f986ccf Add COREXZ option to configurations 2015-07-19 16:17:03 -05:00
Scott Lahteine
de25a48dec Remove PID examples from preconfigured configs 2015-07-15 19:13:53 -05:00
Scott Lahteine
7456710a1f Update configs formatting 2015-07-15 19:13:47 -05:00
Scott Lahteine
391386dd94 Update configs for new servo deactivation 2015-07-15 19:13:40 -05:00
Scott Lahteine
c3c605c658 Move note about LiquidTWI2 to Configuration.h (PR#2406) 2015-07-09 05:33:17 -05:00
Scott Lahteine
dc40a5f6e0 Patch up more outdated config lines 2015-06-15 20:20:32 -05:00
Scott Lahteine
2dd1859247 Cleanup spaces and comments in configs and conditionals 2015-06-15 20:20:31 -05:00
Scott Lahteine
d3bce05d54 Fix up spacing for filament sensor values 2015-06-15 20:20:31 -05:00
Scott Lahteine
b4b10a57fe Fix configurator section directives and values lists 2015-06-15 20:20:31 -05:00
Scott Lahteine
bba14dcbe6 Move Z Safe Homing point to the middle of the movement range 2015-06-15 20:20:31 -05:00
Richard Wackerbarth
58941e543e ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED removed
#defining something just to define something else doesn’t
make sense

If you want SDCARDDETECTINVERTED, just define it yourself.

If the previous code was intended to define, undefined and then again define the term, that code is improper.
2015-06-06 21:44:59 -05:00