MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
14,902 Commits 1 Branch 0 Tags 129 MiB
2603a237f9
Commit Graph

203 Commits

Author SHA1 Message Date
Scott Lahteine
750a16ad38 Fix MIN/MAX function collision with macros 2019-07-05 18:14:02 -05:00
Scott Lahteine
d4415dcf59 Fix analogWrite ambiguity 2019-07-02 04:36:02 -05:00
Tanguy Pruvot
19aafb9050 Fix STM32F1 motor shocks (stepper timer issue) (#14030) 2019-06-29 04:39:38 -05:00
Scott Lahteine
93cd66ac11 Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
InsanityAutomation
06f3273531 Fix DELTA pulse wait bug (#14028) 2019-05-17 16:16:56 -05:00
Scott Lahteine
ad4ffa1d2f
Use C++ language supported 'nullptr' (#13944) 2019-05-09 11:45:55 -05:00
Tanguy Pruvot
7da63fa03f Fix NOMORE() sign warning in stepper (#13894) 2019-05-04 15:59:38 -05:00
Marcio Teixeira
15357af67c Backlash cleanup (#13659) 
…And save backlash, fil. sensor, ExtUI userdata to EEPROM.
 2019-05-03 23:53:15 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros (#13419) 
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
 2019-03-16 23:43:06 -05:00
InsanityAutomation
09eb30dc05 IDEX Mirror mode based on Formbot / Vivedino Symmetric mode (#13404) 2019-03-15 22:46:27 -05:00
Scott Lahteine
67bee06e43 No patch needed for non-libmaple analogWrite 
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
 2019-03-13 07:21:10 -05:00
Scott Lahteine
f89b375fb9
Fixes and improvements for PWM pins (#13383) 2019-03-13 06:51:15 -05:00
Scott Lahteine
1f7e220387 Make HAL ISR macros function-like 2019-03-10 20:44:27 -05:00
Robert Mendon
367d392880 Init stepper current after stepper pins are set up (#13302) 2019-03-03 20:58:02 -06:00
Vasily Evseenko
71773b128d Fix stepper use before init. Add Ultimaker2+ Extended clone config (#13284) 2019-03-02 17:29:02 -06:00
Bob Kuhn
ddbe4cfa20 Printrboard G2 support (#13116) 2019-02-26 21:03:13 -06:00
Scott Lahteine
0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Simon Jouet
5cd0fa3ce1 Basic GPIO expander using the ESP32 I2S peripheral (#12959) 2019-02-10 05:40:31 -06:00
Scott Lahteine
1bd9a63049 Add HAS_EXTRA_ENDSTOPS macro 2019-02-06 05:10:05 -06:00
Scott Lahteine
d4d1b28a06 Fix some include paths 2019-02-04 03:57:15 -06:00
Mark Zachmann
4d1093b386 Fix init of last_direction_bits (#13067) 2019-02-03 01:29:00 -06:00
jeffstaley
0da636e1a3 Set correct stepper direction on reset (#13032) 
On a reset steppers were being initialized to incorrect direction. Original code wasn't respecting `INVERT_Z_DIR` define.
 2019-01-27 23:02:38 -06:00
Bob Kuhn
2f35747f29 L6470 SPI daisy chain support (#12895) 2019-01-23 19:06:54 -06:00
TheLongAndOnly
cb643d87df Adding missing code for triple Z-stepper auto-align (#12786) 2019-01-01 18:22:04 -06:00
Scott Lahteine
6cf8d40f41 Fix some serial echos of pin states 2018-12-09 02:38:32 -06:00
Scott Lahteine
c986239837
A single SERIAL_ECHO macro type (#12557) 2018-11-29 16:58:58 -06:00
Scott Lahteine
edfd106bc5
Rejigger Filament Runout class (#12428) 2018-11-14 11:45:57 -06:00
Ryan
052d102ded UltiMachine Archim 1 support (#12404) 2018-11-14 00:27:39 -06:00
Scott Lahteine
9da6809ac3 Adjust some comment spacing 2018-11-11 11:28:50 -06:00
Scott Lahteine
5182eaf661 Fix endstops enable behavior during probing 
Fix a bug introduced in #9582
 2018-11-05 04:17:37 -06:00
Scott Lahteine
e0956bb572 Drop 'register' storage specifier 2018-11-04 16:17:13 -06:00
Scott Lahteine
6e3caf23b6 IS_DELTA => ENABLED(DELTA) 2018-11-03 03:57:11 -05:00
TheLongAndOnly
5536228359 G34 Auto-align multi-stepper Z axis (#11302) 2018-10-29 14:01:36 -05:00
InsanityAutomation
aebbb2359d Fix IDEX homing X0 wrong direction (#12200) 2018-10-24 16:40:06 -05:00
forkoz
3a3ab3391f Return set_directions() to stepper.cpp (#12182) 
Initial manual Z move can be negative if your stepper is inverted. Leads to bad situations for crashed or initially booted printers.
 2018-10-22 19:30:51 -05:00
AnHardt
d82bcdeea1 Make PULSE_STOP(E) conditional (#12121) 2018-10-17 09:52:57 -05:00
Chris Pepper
c90e26dfa6 fix normal extruder stepping (#12118) 2018-10-17 02:47:31 -05:00
Marcio Teixeira
056561df93 [2.0.x] Enhancements to FILAMENT_RUNOUT_SENSOR (#12069) 
- Added FILAMENT_RUNOUT_DISTANCE_MM option
- Added FILAMENT_MOTION_SENSOR option
 2018-10-16 07:28:52 -05:00
AnHardt
f56968ba0b New Continuous Filament Mixer (#12098) 2018-10-16 03:38:57 -05:00
Scott Lahteine
ddaef1a60c Clean trailing whitespace 2018-10-11 21:40:55 -05:00
Scott Lahteine
45e738876a Add stepper MS3 support 
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
 2018-10-11 01:10:11 -05:00
Scott Lahteine
d556dc1865
Fix and improve EEPROM storage (#12054) 
* Clean up Temperature PID
* Improve EEPROM read/write/validate
* Group `SINGLENOZZLE` saved settings
* Group planner saved settings
* Group filament change saved settings
* Group skew saved settings
* Group `FWRETRACT` saved settings
 2018-10-10 09:45:20 -05:00
Roxy-3D
0780913848 IDEX Improvements (#11848) 2018-09-17 01:06:22 -05:00
Scott Lahteine
1718eff54a Code changes supporting up to 6 extruders 2018-09-16 22:32:53 -05:00
Holger Müller
1a6f2b29b8 Add support for Triple-Z steppers/endstops 2018-09-16 00:35:58 -05:00
Scott Lahteine
d882717d98
Save some PROGMEM with constexpr (#11798) 
When possible, make `active_extruder` a `constexpr` to save some PROGMEM.
 2018-09-10 23:09:26 -05:00
Sebastianv650
7e8c073fba Fix extruder stops extruding with LA (#11758) 2018-09-09 00:04:14 -05:00
Scott Lahteine
d1ceaf5550
[2.0.x] Followup to IDEX changes (#11707) 2018-09-03 23:15:31 -05:00
Roxy-3D
7680b64aa6
IDEX clean up (#11690) 2018-09-02 10:18:59 -05:00
Dave Johnson
c64199941e Compile only selected PIO environment (#11519) 2018-08-14 03:28:52 -05:00
Giuliano
e85feb2545 [2.0.x] Better timing handling (#11461) 2018-08-06 23:13:36 -05:00
Scott Lahteine
aa4cd2e861 Eliminate stepper.* signed/unsigned warnings 2018-06-27 23:10:51 -05:00
Eduardo José Tagle
edb21f349a Fix stepper/planner block handling, race conditions (#11098) 
- Allow planner to alter the deceleration phase of the currently executing block.
- Remove BUSY flag, as it is NON ATOMIC to set bits in the Stepper ISR and Planner at the same time.
 2018-06-27 18:11:16 -05:00
etagle
5b49fccf80 Add stepper driver DIR delay configuration option 
...and recommended pulse width configuration for A4988
 2018-06-26 13:28:04 -05:00
Scott Lahteine
99591dc20c
Filter endstops state at all times (#11066) 2018-06-21 20:14:16 -05:00
etagle
a215725df6 Fix stepper pulse timing 
Always honor minimum period on stepper pulse generation, and fix timing calculations

Signed-off-by: etagle <ejtagle@hotmail.com>
 2018-06-12 21:34:24 -05:00
Scott Lahteine
0d79128c8d Localize stepper-specific defines 2018-06-12 21:16:54 -05:00
Scott Lahteine
4dbec774b5 HAL_*_TIMER_RATE => *_TIMER_RATE 2018-06-12 16:39:12 -05:00
etagle
6f14bcaa3e Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping 
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
 2018-06-10 16:02:47 -05:00
etagle
39a7e7720d Adaptive multiaxis step smoothing 
- Stepper bugs fixed
- Support MIXING_EXTRUDER with Linear Advance
- Miscellaneous cleanup
 2018-06-10 16:02:47 -05:00
Scott Lahteine
3701869e6c Add HAL_timer_start for AVR, use stepper timer to time pulses 2018-06-09 22:30:13 -05:00
Scott Lahteine
ad8d3150aa Cleanup for dual endstops homing 2018-06-03 00:34:29 -05:00
Eduardo José Tagle
d3c02410a8 [2.0.x] Small assorted collection of fixes and improvements (#10911) 
* Misc fixes and improvements

- Get rid of most critical sections on the Serial port drivers for AVR and DUE. Proper usage of FIFOs should allow interrupts to stay enabled without harm to queuing and dequeuing.
  Also, with 8-bit indices (for AVR) and up to 32-bit indices (for ARM), there is no need to protect reads and writes to those indices.
- Simplify the XON/XOFF logic quite a bit. Much cleaner now (both for AVR and ARM)
- Prevent a race condition (edge case) that could happen when estimating the proper value for the stepper timer (by reading it) and writing the calculated value for the time to the next ISR by disabling interrupts in those critical and small sections of the code - The problem could lead to lost steps.
- Fix dual endstops not properly homing bug (maybe).

* Set position immediately when possible
 2018-06-01 19:02:22 -05:00
Scott Lahteine
4299e5dc8b
Modify E-stepping macros for use in LINEAR_ADVANCE (#10885) 2018-05-28 19:34:08 -05:00
Scott Lahteine
0ca9db7051 Correct HOTENDS for SWITCHING_EXTRUDER 2018-05-27 23:22:48 -05:00
Eduardo José Tagle
7b9f0302d4 Fix Bresenham rounding errors, add link to article (#10871) 2018-05-27 01:49:59 -05:00
Scott Lahteine
2566342979 Adjust some commentary 2018-05-27 00:10:25 -05:00
Scott Lahteine
6775a16c97 Fix switching extruder stepping with LA 2018-05-26 19:07:01 -05:00
Scott Lahteine
aaaf09bda2 BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION 2018-05-26 18:33:51 -05:00
Scott Lahteine
01d37e00af
Fix up stepper ISR with linear advance timing (#10853) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-26 01:00:13 -05:00
Scott Lahteine
7261f48872 Fix reset of endstops and move state 2018-05-24 19:33:36 -05:00
Scott Lahteine
50fa8e01c1 Minor optimization of axis_did_move bits 2018-05-24 19:08:07 -05:00
Scott Lahteine
f28e366b77 Followup for core endstops 2018-05-24 03:02:57 -05:00
Scott Lahteine
9644d56b42 Patches for core motion tests 2018-05-24 00:49:01 -05:00
Scott Lahteine
3e3789da85
Regression: Endstops Core compatibility (#10823) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-23 03:45:25 -05:00
Scott Lahteine
4b2f6e3b2b
[2.0.x] Add endstop noise filter (#10796) 2018-05-21 15:51:38 -05:00
Scott Lahteine
435ecb6b67 Followup to stepper/planner refactor 2018-05-20 23:13:38 -05:00
etagle
569df3fc0c Fix interrupt-based endstop detection 
- Also implemented real endstop reading on interrupt.
 2018-05-20 07:10:24 -05:00
etagle
a11eb50a3e Refactor and optimize Stepper/Planner 
Better encapsulation and considerably reduce stepper jitter
 2018-05-20 06:23:58 -05:00
Scott Lahteine
7dc03ce721 Simplified fix for babystep pulse width 
Alternative to the apparently superfluous double delay
 2018-05-19 21:00:08 -05:00
Scott Lahteine
65270d6a96 Fix LIN_ADVANCE + SWITCHING_EXTRUDER 
Followup to #10656
 2018-05-19 18:32:00 -05:00
Bob Kuhn
9ad42d6617 add delay between pulse edges (#10778) 2018-05-19 17:12:16 -05:00
Scott Lahteine
ba4c32eec5 Followup to _AXIS patch 2018-05-13 10:43:35 -05:00
Scott Lahteine
d9154ebdf6 Followup to math patch 2018-05-13 09:30:27 -05:00
Scott Lahteine
883b0c9880
Convert custom maths to inlines (#10728) 2018-05-13 08:10:08 -05:00
Scott Lahteine
08e36e264e Apply _AXIS macro 2018-05-13 06:51:01 -05:00
Scott Lahteine
8f8c6a9bc4
Move get_axis_position_mm to Planner (#10718) 2018-05-12 09:59:11 -05:00
Scott Lahteine
a1062eec5b
Better handling of DELAY_NS and DELAY_US (#10716) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-12 08:34:04 -05:00
Scott Lahteine
3614e6ce0f Fix Switching Extruder with Linear Advance 2018-05-12 02:26:14 -05:00
Scott Lahteine
306f0f2135
Move Stepper::synchronize to Planner (#10713) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-12 01:38:02 -05:00
Scott Lahteine
722aba77f3
Fix LIN_ADVANCE + SWITCHING_EXTRUDER stepper directions (#10656) 2018-05-09 14:36:09 -05:00
Scott Lahteine
0436e16fb2 Apply shorthand Assembler macros 2018-05-08 10:08:54 -05:00
Scott Lahteine
af1950a63e Improve sync of stepper positions 2018-05-06 01:24:14 -05:00
Scott Lahteine
0c23792344 Apply int32_t to stepper 2018-05-05 18:21:03 -05:00
Eduardo José Tagle
0c428a66d9 Proper AVR preemptive interrupt handling (#10496) 
Also simplify logic on all ARM-based interrupts. Now, it is REQUIRED to properly configure interrupt priority. USART should have highest priority, followed by Stepper, and then all others.
 2018-04-23 22:05:07 -05:00
Scott Lahteine
36b97bde9f clear_block_buffer, kill_current_block in quick_stop 2018-04-13 22:04:53 -05:00
Eduardo José Tagle
57a899a412 [2.0.x] 6th-order jerk-controlled motion planning in real-time for AVR (#10373) 2018-04-11 18:13:42 -05:00
etagle
a29adde5c0 Implement BEZIER_JERK_CONTROL 
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
 2018-04-07 21:03:28 -05:00
Scott Lahteine
7d8a46519f Output ABC for delta stepper counts 2018-03-31 20:13:32 -05:00
Scott Lahteine
1cb810ff1c
[2.0.x] Automatically reset stepper timeout (#10179) 
* Automatically reset stepper timeout in manage_inactivity

Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.

* blocks_queued => has_blocks_queued
 2018-03-21 19:30:06 -05:00