Vertabreaker
3874f4a097
Geeetech A30 / GTM32 support ( #16071 )
2019-12-01 21:25:45 -06:00
brian park
b258cc85bf
Mostly Printed SCARA (MPSCARA) support ( #15573 )
2019-11-30 08:57:34 -06:00
Felicia Hummel
690ed531b6
Configurable PSU power-on delay ( #16050 )
2019-11-30 07:17:24 -06:00
InsanityAutomation
6b4166e67f
Add Modix Big 60 configs ( #16049 )
2019-11-30 06:47:56 -06:00
Scott Lahteine
4d8e7cdb30
Update SKR mini configs
2019-11-29 20:07:17 -06:00
Vertabreaker
74e5199808
A20, A10T, A20T example configs ( #16019 )
2019-11-29 07:11:43 -06:00
thisiskeithb
e0df35e6b5
Enable Filament Change on BTT SKR E3 boards ( #16023 )
2019-11-27 01:21:59 -06:00
Dirk O. Kaar
0550f30790
Renkforce configuration updates ( #16017 )
2019-11-26 20:22:17 -06:00
George Fu
cf1e19d167
Fysetc S6 support ( #15850 )
2019-11-26 16:15:03 -06:00
Dirk O. Kaar
1cea1687f3
Renkforce RF100 (V1), V2, XL, and XL Plus ( #15695 )
2019-11-26 14:06:23 -06:00
haschtl
ff6518c0a8
Add PID_FAN_SCALING option ( #15585 )
2019-11-26 03:34:43 -06:00
Scott Lahteine
441e822fb3
LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE
2019-11-23 17:04:17 -06:00
Scott Lahteine
bdd366b97c
Update sensor -5 label
2019-11-21 04:57:57 -06:00
Scott Lahteine
20964ca7dc
Bring configs up to date
2019-11-21 04:48:18 -06:00
Jason Smith
b904ba0f29
Improve Delta probing / calibration ( #15887 )
2019-11-21 03:26:00 -06:00
Bob
751cd1f533
MAX31865 temperature sensor ( #15930 )
2019-11-21 03:15:10 -06:00
Scott Lahteine
4cffee3ca3
Drop obsolete setting
2019-11-20 23:57:13 -06:00
Scott Lahteine
47e4e5f1db
Update thermocouple comments
2019-11-20 23:51:51 -06:00
BigTreeTech
ab8b24fdba
Power Loss Recovery with a UPS ( #15943 )
2019-11-20 17:40:21 -06:00
thisiskeithb
967f951789
SKR Mini E3 1.0/1.2 configs ( #15941 )
2019-11-20 00:12:57 -06:00
Jason Smith
2dab109baa
Update Anycubic Kossel config ( #15935 )
2019-11-19 23:23:25 -06:00
Scott Lahteine
aa93e1f21a
Update TMC_ADV examples
2019-11-15 02:15:10 -06:00
Scott Lahteine
7e9c846ec3
Modify comment for unlimited E steppers
2019-11-13 01:45:50 -06:00
Roman Moravčík
e110f5abce
M73 R : Set Remaining Time ( #15549 )
2019-11-12 19:36:54 -06:00
Scott Lahteine
5e5045c4ee
Touch UI finishing touches
2019-11-10 18:52:53 -06:00
danym21
28e1614c2e
Add Sensorless Homing current ( #15690 )
2019-11-10 18:45:06 -06:00
LinFor
48b7a1e66e
Allow non-zero "fan off" PWM value ( #15709 )
2019-11-10 16:33:56 -06:00
Scott Lahteine
328ddda654
Clean up whitespace
2019-11-04 13:23:26 -06:00
studiodyne
f139642e0f
XY/Z Babystep Multiplicators ( #15691 )
2019-10-28 16:44:17 -05:00
thisiskeithb
abb44cf564
No boot-screen on Sidewinder X1 TFT28 ( #15706 )
2019-10-28 16:33:44 -05:00
Scott Lahteine
7a342ecb93
Show Total E during print ( #15703 )
2019-10-27 17:49:27 -05:00
Scott Lahteine
9720d21301
Clean up trailing whitespace
2019-10-27 15:32:29 -05:00
Scott Lahteine
c2cec563dc
Followup to Cancel Objects
2019-10-27 15:26:24 -05:00
thisiskeithb
5d4e309dd3
CR-10/S/Mini & Ender-5 default TMC RMS currents ( #15666 )
2019-10-26 13:13:08 -05:00
Scott Lahteine
f8ad15fde8
Rename BOARD_STM32F4 to fix use with MB()
2019-10-25 18:12:29 -05:00
Scott Lahteine
93f0012959
Cancel Objects - As seen at ERRF2019 ( #15590 )
2019-10-24 15:35:40 -05:00
Scott Lahteine
2a7e1d459f
Option to rotate Percent, (E)lapsed, and (R)emaining time ( #15578 )
2019-10-24 14:00:59 -05:00
Scott Lahteine
ccf61eca84
Fix diplay elaspsed
2019-10-24 13:48:27 -05:00
Luu Lac
0b0b822671
Add note: TMC2209 requires stealthChop for Sensorless Homing ( #15658 )
2019-10-24 11:58:37 -05:00
Scott Lahteine
7aaa8bc8bd
Bring WDi3 example up to date
2019-10-21 13:33:40 -05:00
Robby Candra
16ae9ee88b
Update Configuration_adv
2019-10-17 05:37:22 +07:00
Jason Smith
832cb7e1ac
Z_STEPPER_AUTO_ALIGN — To align with Z stepper points ( #15195 )
2019-10-16 13:39:58 -05:00
InsanityAutomation
b2eda1af2f
Fix typo in G34 configuration ( #15572 )
2019-10-15 17:22:13 -05:00
Tanguy Pruvot
93097af0ed
U20: update config, ts, serial, jerk, limited edit values... ( #15524 )
2019-10-15 12:35:53 -05:00
InsanityAutomation
0074d63962
Vendor version override ( #14189 )
...
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
2019-10-15 12:32:44 -05:00
Roxy-3D
59378db7de
Eliminate clutter in Formbot T-Rex 3 Configuration.h file
...
The extra clutter was making the Junction Deviation patch script calculate the wrong value.
(The script wasn't smart enough to see the extra lines were commented out and used the wrong values in the calculation.)
All fixed now with a JUNCTION_DEVIATION_MM calculated at .017
2019-10-11 17:11:24 -05:00
Roxy-3D
c8e348731f
Correct Junction Deviation value for Formbot Raptors
...
Re-apply the formula .4 * V^2 / Default_Acceleration to work correctly in Raptor configuration.h file.
(The problem is there are multiple XJerk and YJerk values declared based on the step sticks used on the printer.)
This change should provide correct values for all setups.
2019-10-11 16:52:47 -05:00
Roxy-3D
7a1fa2177c
Eliminate multiple DEFAULT_ACCELERATION declarations.
...
Re-calculate and fix the Junction Deviation value using correct DEFAULT_ACCELERATION number.
2019-10-11 16:31:24 -05:00
Matthew Piercey
ac8083588b
Add config for Wanhao Duplicator i3 v2.1
2019-10-11 00:59:58 -05:00
LinFor
b20d5a7cc6
Estimate Remaining Time (graphical display) ( #15497 )
2019-10-10 21:03:33 -05:00
