Commit Graph

28 Commits

Author SHA1 Message Date
Scott Lahteine
93cd66ac11 Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
Scott Lahteine
6664b90bbb
Init servo pins in HAL_init (#14425) 2019-06-27 16:29:17 -05:00
Tanguy Pruvot
52383633e7 STM32F1: M43 PINS_DEBUGGING (#14072) 2019-06-21 01:20:17 -05:00
Giuliano Zaro
a74aad3b4a Clean up HALs / FastIO (#14082) 2019-05-21 18:28:12 -05:00
Scott Lahteine
ad4ffa1d2f
Use C++ language supported 'nullptr' (#13944) 2019-05-09 11:45:55 -05:00
Tanguy Pruvot
a4c24511f7 STM32: Fix Marduino SBI/CBI redefine (#13912) 2019-05-05 22:06:30 -05:00
Scott Lahteine
e7682eea42
Use Arduino.h include wrapper (#13877) 2019-05-02 00:45:50 -05:00
Alexander Gavrilenko
6d9aaca082 Fix compilation error for MKS Robin (#13506) 2019-03-29 12:40:24 -05:00
Msq001
fb3302feda Fix STM32F1 Serial and ADC pins (#13331) 2019-03-08 02:21:32 -06:00
Scott Lahteine
4200f9ed62 Hide freeMemory et.al. warnings 2019-02-26 18:03:00 -06:00
Scott Lahteine
631d867dc9 HAL cleanups 2019-02-20 06:27:26 -06:00
Scott Lahteine
0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Reece Kibble
7557f8d68c Rename all Stm32f1 to STM32F1 (#12639) 2018-12-31 16:36:49 -06:00
Scott Lahteine
b3b4e6dc45
Change Marlin debug flag names to fix conflicts (#12340)
In reference to #11000
2018-11-05 22:48:28 -06:00
Scott Lahteine
f5eab912ed
Apply #pragma once, misc cleanup (#12322)
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
2018-11-04 02:25:55 -06:00
Scott Lahteine
0bd54392b7 Use uint8_t in EEPROM code 2018-10-09 19:00:01 -05:00
Alexander Amelkin
2ecfda80ac Improve support for JTAG/SWD pins reuse (#11963)
STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.
2018-09-29 19:00:49 -05:00
Scott Lahteine
ad21a4f07b Tweaks to HAL format and order 2018-09-28 15:59:50 -05:00
Alexander Amelkin
84926b1d5a HAL general support for DISABLE_JTAG option (#11211)
Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.
2018-09-27 19:02:50 -04:00
Alexander Amelkin
f417408df1 [STM32F1] Fix HAL for new PlatformIO (#11749) 2018-09-07 18:15:32 -05:00
Dave Johnson
c64199941e Compile only selected PIO environment (#11519) 2018-08-14 03:28:52 -05:00
Andy Shaw
624986d423 Ensure ADC conversion is complete before reading (#11336)
The current Marlin implementation relies on a timer interrupt to start the ADC conversion and read it. However in some circumstances the interrupt can be delayed resulting in insufficient time being available for the ADC conversion. This results in a bad reading and false temperature fluctuations. These changes make sure that the conversion is complete (by checking the ADC hardware via the HAL) before reading a value.

See: https://github.com/MarlinFirmware/Marlin/issues/11323
2018-07-26 03:59:19 -05:00
Scott Lahteine
9b945c13a1 Fix STM32F1 ISR_ENABLED 2018-06-11 22:09:45 -05:00
Alexey Shvetsov
2ddba201c0 STM32F1 HAL Fixes (#10999)
- Enable / disable interrupts with `__iSeiRetVal` / `__iCliRetVal`
- Add STM32F1 to Travis CI tests
2018-06-11 20:00:56 -05:00
Eduardo José Tagle
d3c02410a8 [2.0.x] Small assorted collection of fixes and improvements (#10911)
* Misc fixes and improvements

- Get rid of most critical sections on the Serial port drivers for AVR and DUE. Proper usage of FIFOs should allow interrupts to stay enabled without harm to queuing and dequeuing.
  Also, with 8-bit indices (for AVR) and up to 32-bit indices (for ARM), there is no need to protect reads and writes to those indices.
- Simplify the XON/XOFF logic quite a bit. Much cleaner now (both for AVR and ARM)
- Prevent a race condition (edge case) that could happen when estimating the proper value for the stepper timer (by reading it) and writing the calculated value for the time to the next ISR by disabling interrupts in those critical and small sections of the code - The problem could lead to lost steps.
- Fix dual endstops not properly homing bug (maybe).

* Set position immediately when possible
2018-06-01 19:02:22 -05:00
nightdemonx
e911635fb1 Add thermocouple with AD8495 support 2018-05-02 08:43:16 -05:00
J.C. Nelson
5b5e322356 Set Interrupt Priorities and Grouping for STM32F103. (#10517) 2018-04-26 00:21:16 -05:00
Chris Pepper
cc6d41e1d3 Use a macro for HAL header redirection (#10380) 2018-04-12 20:25:08 -05:00