Scott Lahteine
28f1276286
[2.0.x] Add Z_AFTER_PROBING option ( #10058 )
...
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
2018-03-11 13:07:55 -05:00
Scott Lahteine
79e6d890d5
Add UNKNOWN_Z_NO_RAISE to example configs
2018-03-10 00:17:34 -06:00
Bob-the-Kuhn
6b4a928145
2uS default step pulse ( #9989 )
2018-03-07 21:11:01 -06:00
Scott Lahteine
94f5204629
Move AUTO_REPORT_SD_STATUS to SDSUPPORT block
2018-03-07 01:50:30 -06:00
Scott Lahteine
a2a672449a
Updated boot screen description
2018-03-03 20:04:17 -06:00
Scott Lahteine
cd7dc49527
Fix CR-10 status screen missing commas
...
Fix #9660
2018-02-26 15:52:50 -06:00
TheSFReader
eb079959fb
Report sd card progress [FR] #9751 ( #9832 )
...
* SD Status auto-report feature
Feature Request #9751
2018-02-26 15:38:27 -06:00
Scott Lahteine
54c65fc3cb
Standardize LCD buzz defaults
2018-02-24 22:58:22 -06:00
Scott Lahteine
4953fb1c88
Standardize encoder defaults
2018-02-24 22:34:45 -06:00
Scott Lahteine
078627f805
[2.0.x] Creality Ender-4 configuration ( #9803 )
...
* Move Creality Ender-2 configurations
* Add Creality Ender-4 configurations
2018-02-24 22:11:11 -06:00
Scott Lahteine
5684beae90
Bring some configs up to speed
2018-02-24 21:56:27 -06:00
Scott Lahteine
2024775e07
Spanish (UTF8) Language ( #9786 )
...
From #7314 by @MrAmericanMike
2018-02-23 20:24:02 -06:00
Scott Lahteine
b8485528b2
Prettify LCD_PROGRESS_BAR options
2018-02-23 19:19:57 -06:00
Scott Lahteine
e65a853c59
Fix LCD_PROGRESS_BAR
...
Fix #9208
2018-02-23 14:05:10 -06:00
Scott Lahteine
17d984eab3
Add RESTORE_LEVELING_AFTER_G28 to example configs
2018-02-23 13:38:54 -06:00
Scott Lahteine
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 ( #9712 )
2018-02-23 00:53:29 -06:00
Scott Lahteine
556abc0888
Add LIGHTWEIGHT_UI to example configs
2018-02-22 00:10:43 -06:00
Scott Lahteine
59c98d6fd5
Hephestos2 heated bed kit for all ( #9757 )
2018-02-21 22:27:09 -06:00
ldkraemer
6c3162f9c6
Add CR-10 Mini configuration
2018-02-21 19:08:42 -06:00
ldkraemer
4431f4deb8
Add CR-10S _Bootscreen.h
2018-02-21 18:55:14 -06:00
Scott Lahteine
343c17d5b3
Reduce Creality3D bootscreens flash usage ( #9752 )
2018-02-21 16:08:52 -06:00
Scott Lahteine
7d8c6b3f3c
Add 20x4 option for Sainsmart LCD ( #9740 )
2018-02-21 00:46:25 -06:00
Scott Lahteine
a11fcd46a2
Merge pull request #9699 from Studiodyne/Studiodyne-filamentMulti
...
[2.0.x] Support multiple filament runout sensors
2018-02-19 08:42:39 -06:00
Scott Lahteine
a74cece6d0
CR-10 Bootscreen
...
From @plainpylut in #9660
2018-02-19 08:07:08 -06:00
Scott Lahteine
8733d5a296
Add NUM_RUNOUT_SENSORS to example configs
2018-02-19 07:02:50 -06:00
Scott Lahteine
ca55f2927a
Pulldown pin mode support ( #9701 )
...
Implemented for LPC1768.
2018-02-18 19:26:23 -06:00
Scott Lahteine
bab0e975c8
The ENDER can use BOARD_MELZI_CREALITY ( #9692 )
2018-02-18 02:24:39 -06:00
Scott Lahteine
60fc372211
Add CODEPENDENT_XY_HOMING to example configs
2018-02-18 00:46:04 -06:00
blye
330437ad7c
Update LCD_SET_PROGRESS_MANUALLY in configs
2018-02-17 08:12:10 -06:00
Scott Lahteine
08d685c97a
Followup to 21e60fd
2018-02-16 02:09:17 -06:00
Bob-the-Kuhn
349dafa728
config update (set to -1)
2018-02-15 21:42:54 -06:00
Roxy-3D
21e60fd3ed
Allow user to control Z-Height correction for off mesh movements ( #9661 )
2018-02-15 15:07:42 -06:00
Scott Lahteine
5b70d3da1c
Update DIGIPOT_I2C_MOTOR_CURRENTS comments
2018-02-13 22:54:12 -06:00
Scott Lahteine
2ec65051fd
Fix serial comment sp.
2018-02-13 22:40:56 -06:00
Scott Lahteine
38c7d53bf7
Repair some spacing
2018-02-10 19:33:26 -06:00
Scott Lahteine
694d2ebec0
TMC SW SPI pins in Configuration_adv.h
...
Counterpart to #9632
2018-02-08 18:49:38 -06:00
Thomas Moore
1541224a81
Enable Z axis and delta sensorless homing ( #9516 )
2018-02-08 04:20:44 -06:00
Scott Lahteine
b2f8b4ada5
I2C position encoders update ( #9533 )
...
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
2018-02-08 03:57:11 -06:00
Scott Lahteine
b5e92f4f90
[2.0.x] Enable / disable PSU automatically ( #9503 )
2018-02-06 00:22:30 -06:00
Scott Lahteine
eecb0188c0
Add ULTI_CONTROLLER to example configs
2018-02-05 22:30:03 -06:00
Scott Lahteine
4925f60cff
Add MALYAN_LCD to configs
2018-02-04 18:52:44 -06:00
Manuel Valentino
374f2a5e16
[2.0.x] Fixed wrong information about TMC2208 wiring ( #9335 )
2018-02-02 04:45:55 -06:00
Scott Lahteine
79796b22ad
Fix up _Bootscreen.h and _Statusscreen.h
2018-02-02 00:57:16 -06:00
teemuatlut
5c69d45f5b
[2.0.x] TMC2130 support for LPC platform ( #9114 )
2018-02-01 21:49:40 -06:00
Scott Lahteine
7d6c009104
Add thermistor 15 tuned for JGAurora A5
2018-01-22 01:27:11 -06:00
Scott Lahteine
348b454401
Probe bounds based on bed size
2018-01-22 01:05:11 -06:00
Scott Lahteine
c68ce8667d
Fix and improve Creality configs
2018-01-21 02:04:14 -06:00
Scott Lahteine
8190fdb260
[2.0.x] Option to use Neopixel as case light ( #9270 )
...
* Add option to use Neopixel as case light
* Apply CASE_LIGHT_USE_NEOPIXEL to example configs
2018-01-20 16:58:41 -06:00
Scott Lahteine
57b61491d3
Set FIL_RUNOUT_PIN for Creality CR10-S
...
Tested with M43 and found to be connected to DIO 2
2018-01-20 11:56:57 -06:00
Scott Lahteine
4a4d832344
Use standard encoder pulses/steps for CR-10S
2018-01-20 11:35:52 -06:00
Scott Lahteine
fa432508b0
Followup to Ender config
2018-01-15 06:00:21 -06:00
Scott Lahteine
9a2dd0bc5a
Creality Ender 2/4 configuration
2018-01-15 03:42:23 -06:00
Scott Lahteine
a27fa80a7e
More featureful CR-10S configuration
2018-01-15 01:06:06 -06:00
Scott Lahteine
02ff12d491
More up front option to show SD percentage
2018-01-14 23:32:39 -06:00
Scott Lahteine
77c2d810f9
Bring configs up to date
2018-01-14 22:52:06 -06:00
Scott Lahteine
3952070800
Link to marlinfw.org boot screen tool
2018-01-14 22:41:05 -06:00
Scott Lahteine
8ac246162e
Creality CR-10S configurations
...
Provided by printedsolid.com
2018-01-11 01:10:17 -06:00
Thomas Moore
dabb75034c
Update example configurations
2018-01-10 00:01:20 -06:00
Scott Lahteine
5c076a6d93
Improved M915 description
2018-01-09 18:56:27 -06:00
Scott Lahteine
a94104dbb5
Merge pull request #9113 from teemuatlut/TMC_followup
...
[2.0.x]TMC followup
2018-01-09 18:46:35 -06:00
GMagician
5295b4713d
[2.0.x] add semitec 104NT-4 ( #9119 )
...
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
2018-01-09 16:53:12 -06:00
teemuatlut
cdc61ebf53
Add M915 configuration option
2018-01-09 18:28:48 +02:00
Scott Lahteine
8704e533da
Apply FILAMENT_LOAD_UNLOAD_GCODES to example configs
2018-01-04 03:56:36 -06:00
Scott Lahteine
9312ee63b0
Merge pull request #8979 from thinkyhead/bf2_sync_up_configs
...
[2.0.x] Synchronize configs with 1.1.x
2017-12-31 01:15:43 -06:00
Scott Lahteine
10edb469bb
Apply SLIM_LCD_MENUS to example configs
2017-12-31 00:11:21 -06:00
Scott Lahteine
0b4a46fa6c
Bring configs up to date with 1.1.x
2017-12-30 23:28:53 -06:00
Scott Lahteine
3b51f5c67e
Add pause/resume action to example configs
2017-12-25 01:39:18 -06:00
Thomas Moore
f0a8a1a853
[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE ( #8866 )
...
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
2017-12-25 01:38:06 -06:00
Scott Lahteine
28fc8741d6
Reduce default jerk. XY by half. Z by 1/4
2017-12-24 19:54:11 -06:00
Scott Lahteine
1cf1cf8759
Add RADDS_DISPLAY to example configs
2017-12-24 19:00:23 -06:00
Scott Lahteine
fdc5e72720
A single setting to validate filament width
2017-12-19 21:33:25 -06:00
Scott Lahteine
31e33d2acd
Add NO_VOLUMETRICS to example configs
2017-12-19 19:51:25 -06:00
Scott Lahteine
f79026acc1
Apply MKS_12864OLED_SSD1306 to examples
...
Followup to #8814
2017-12-16 20:15:36 -06:00
Scott Lahteine
9abbcc3ee0
Apply ZONESTAR_LCD to example configs
2017-12-15 19:11:02 -06:00
Scott Lahteine
674deaf223
Add NANODLP_ALL_AXIS to config examples
2017-12-15 16:22:56 -06:00
teemuatlut
0cd1e91056
[2.0.x] TMC driver update ( #8769 )
2017-12-15 15:03:14 -06:00
Scott Lahteine
69d49a2438
Shorter segments may be better
2017-12-09 06:29:14 -06:00
Scott Lahteine
d7800e7975
Apply MULTIPLE_PROBING to example configs
2017-12-07 16:44:12 -06:00
Richard Wackerbarth
c1184552ac
Change K1 to required option PID_K1
2017-12-05 19:59:59 -06:00
Scott Lahteine
aa7efb96bf
Bring configurations up to date
2017-12-02 21:50:51 -06:00
Scott Lahteine
082ab8fcab
Add SKEW_CORRECTION to example configs
2017-12-01 19:22:27 -06:00
Scott Lahteine
8f90642eea
LED_CONTROL_MENU config changes
2017-11-29 21:02:56 -06:00
Tannoo
cf0f78336b
New Feature: LED_CONTROL_MENU
2017-11-29 21:02:55 -06:00
Scott Lahteine
7c61bcb058
Apply SEGMENT_LEVELED_MOVES to example configs
2017-11-29 16:57:31 -06:00
Scott Lahteine
a67cf78c6b
Clean up whitespace, spacing
2017-11-26 20:18:52 -06:00
Scott Lahteine
7be4857ab9
Tweak BLOCK_BUFFER_SIZE description
2017-11-26 17:36:40 -06:00
Scott Lahteine
5926c9c97b
Followup for MESH_EDIT_GFX_OVERLAY
2017-11-24 15:53:25 -06:00
Scott Lahteine
dc82babe8e
Implement NANODLP_Z_SYNC for 2.0.x
2017-11-24 00:28:06 -06:00
Scott Lahteine
5ce7f23afa
Config option G26_MESH_VALIDATION for all meshes
2017-11-23 21:43:23 -06:00
Scott Lahteine
54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL
...
[2.0] Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:28:55 -06:00
Scott Lahteine
009e3a7aa7
Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:03:17 -06:00
Scott Lahteine
3f0a982b8c
Move Filament Width Sensor to Configuration_adv.h
2017-11-13 21:05:57 -06:00
Scott Lahteine
b76e173205
Move test extrusion options under G26
2017-11-13 21:05:57 -06:00
Scott Lahteine
81b91b3f9d
Clean up some trailing white-space
2017-11-10 02:31:04 -06:00
Scott Lahteine
95ea43bde4
Update XYZ dual stepper configurations
2017-11-08 20:31:43 -06:00
Roxy-3D
ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings ( #8313 )
...
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
2017-11-07 17:13:53 -06:00
Scott Lahteine
2c099fd4c2
Update Thermal Protection Documentation
2017-11-07 15:46:44 -06:00
Scott Lahteine
1b42fba39b
Add CNC_COORDINATE_SYSTEMS to configs
2017-11-04 22:28:46 -05:00
Scott Lahteine
d83a9a53e8
Merge pull request #8220 from thinkyhead/bf2_serial_port_-1
...
[2.0] Add SERIAL_PORT -1 option for configurators
2017-11-03 15:25:12 -05:00
Scott Lahteine
93ba72ea83
Add SERIAL_PORT -1, set on SBASE, STM32F103RET6
2017-11-03 15:22:45 -05:00
