Commit Graph

1742 Commits

Author SHA1 Message Date
Scott Lahteine
0cbbba08bd SD Card Alpha Sorting
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
2014-12-13 06:03:39 -08:00
Scott Lahteine
af0549bfd2 Merge branch 'sd_freemem' of https://github.com/thinkyhead/Marlin into sd_freemem 2014-12-13 06:03:15 -08:00
Scott Lahteine
ae1a698263 Use SdFatUtil::FreeRam() for freeMemory() if there 2014-12-13 06:03:10 -08:00
Scott Lahteine
600b4f0590 Merge branch 'lcd_abort_message' of https://github.com/thinkyhead/Marlin into lcd_abort_message 2014-12-13 06:01:56 -08:00
Scott Lahteine
3ebfd29312 Print a message when printing is aborted
Messages in gcode files like “M117 Printing…” were not being cleared on
Stop Print.
2014-12-13 06:01:46 -08:00
Martin Prazak
2ef0669b19 Split do_blocking_move() to XY and Z sections to make sure that the Z homing feedrate is not exceeded 2014-12-07 15:31:46 +00:00
Scott Lahteine
485ca10bc3 Disable SDCARD_SORT_ALPHA by default
For legacy boards it’s better if this option is disabled.
2014-12-06 04:16:45 -08:00
Scott Lahteine
599530902d Polish up a little... 2014-12-06 03:40:39 -08:00
Bo Herrmannsen
1ba7c31395 Adding Melzi board
these are the files needed to support the Melzi board
2014-12-04 23:45:51 +01:00
Neil Darlow
64139f5e5a Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-12-04 21:09:03 +00:00
galexander1
2f9ed1777d Merge pull request #1168 from boelle/Marlin_v1
Adding Support for Toshiba Stepper Drivers
2014-12-03 09:32:23 -05:00
Bo Herrmannsen
edfcf3b527 Toshiba Stepper Driver support
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
2014-12-03 15:01:52 +01:00
Bo Herrmannsen
c429a4b3ec Toshiba Stepper Driver support
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
2014-12-03 14:37:16 +01:00
Scott Lahteine
e5a334b83a Use SdFatUtil::FreeRam() for freeMemory() if there 2014-12-03 05:19:42 -08:00
Scott Lahteine
f05928d886 Merge branch 'sd_sorting' of https://github.com/thinkyhead/Marlin into sd_sorting 2014-11-30 21:38:26 -08:00
Scott Lahteine
b4e287fe8e Completed SORT_USES_MORE_RAM implementation
For the MORE_RAM option we need to buffer both the short and long
names, even though long names are sometimes redundant. Worst case, all
the names are max length. We can save some RAM by not storing these. We
could save more RAM by only storing the visible part of the long name.
2014-11-30 21:37:10 -08:00
Scott Lahteine
de725bd408 # This is a combination of 4 commits.
# The first commit's message is:
SD Card Alpha Sorting

First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.

# This is the 2nd commit message:

Expand on More RAM concept, address minor bugs

# This is the 3rd commit message:

Improvements, more SORT_USES_MORE_RAM

With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.

# This is the 4th commit message:

Completed SORT_USES_MORE_RAM implementation

For the MORE_RAM option we need to buffer both the short and long
names, even though long names are sometimes redundant. Worst case, all
the names are max length. We can save some RAM by not storing these. We
could save more RAM by only storing the visible part of the long name.
2014-11-30 21:25:30 -08:00
Scott Lahteine
061c1fcd93 Merge branch 'lcd_abort_message' of https://github.com/thinkyhead/Marlin into lcd_abort_message 2014-11-30 19:58:10 -08:00
Scott Lahteine
181e487f13 Print a message when printing is aborted
Messages in gcode files like “M117 Printing…” were not being cleared on
Stop Print.
2014-11-30 19:57:52 -08:00
Scott Lahteine
ff38d7c293 Print a message when printing is aborted
Messages in gcode files like “M117 Printing…” were not being cleared on
Stop Print.
2014-11-30 19:56:06 -08:00
nothinman
1977b4490f Merge pull request #1159 from thinkyhead/lcd_wait_better
M0/M1 Message Fix
2014-11-28 16:44:29 +00:00
Scott Lahteine
7562183efc Skip over spaces first 2014-11-28 08:09:28 -08:00
nothinman
5a8b3a84ae Merge pull request #1155 from thinkyhead/lcd_wait_better
M0-M1 Enhancements
2014-11-28 11:01:24 +00:00
nothinman
1b7c065055 Merge pull request #1158 from elgambitero/patch-2
Updated a bit of spanish language
2014-11-28 10:57:50 +00:00
elgambitero
433ac29d31 Updated a bit of spanish language 2014-11-27 22:02:49 +01:00
Scott Lahteine
2427d0b683 Merge branch 'sd_sorting' of https://github.com/thinkyhead/Marlin into sd_sorting 2014-11-26 21:09:09 -08:00
Scott Lahteine
8ebefe6d35 Completed SORT_USES_MORE_RAM implementation
For the MORE_RAM option we need to buffer both the short and long
names, even though long names are sometimes redundant. Worst case, all
the names are max length. We can save some RAM by not storing these. We
could save more RAM by only storing the visible part of the long name.
2014-11-26 21:08:56 -08:00
Scott Lahteine
725ba8d01e Improvements, more SORT_USES_MORE_RAM
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
2014-11-26 21:08:56 -08:00
Scott Lahteine
2b54eeb897 Expand on More RAM concept, address minor bugs 2014-11-26 21:08:56 -08:00
Scott Lahteine
14187dae6c SD Card Alpha Sorting
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
2014-11-26 21:08:56 -08:00
Scott Lahteine
662fe8288b kill DEADJOE 2014-11-26 21:07:48 -08:00
Scott Lahteine
aad336eb81 Merge branch 'lcd_wait_better' of https://github.com/thinkyhead/Marlin into lcd_wait_better 2014-11-26 21:06:13 -08:00
Scott Lahteine
5874852501 get latest Marlin_v1 changes 2014-11-26 21:05:11 -08:00
Scott Lahteine
12b51d6060 Ignore S and P if no value >0 is included. 2014-11-26 21:05:11 -08:00
Scott Lahteine
d12b24758a Clear LCD to welcome_msg if not printing
The welcome message is more appropriate than “resuming print” if
nothing is printing.
2014-11-26 21:05:11 -08:00
Scott Lahteine
3f54c9ba33 Relocate click ignore code into info screen 2014-11-26 21:05:10 -08:00
Scott Lahteine
92e21d3ee2 M0-M1 Enhancements
Allow M0 and M1 to include a message string. Ignore clicks on “Wait for
user” so that the Info Screen stays up.
2014-11-26 21:05:10 -08:00
Scott Lahteine
5714f64927 get latest Marlin_v1 changes 2014-11-26 21:00:02 -08:00
Scott Lahteine
d407a43ac1 Ignore S and P if no value >0 is included. 2014-11-26 09:21:37 -08:00
Scott Lahteine
eaa788e076 Completed SORT_USES_MORE_RAM implementation
For the MORE_RAM option we need to buffer both the short and long
names, even though long names are sometimes redundant. Worst case, all
the names are max length. We can save some RAM by not storing these. We
could save more RAM by only storing the visible part of the long name.
2014-11-26 08:51:31 -08:00
Scott Lahteine
6901445592 Improvements, more SORT_USES_MORE_RAM
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
2014-11-26 07:17:47 -08:00
Lionello Lunesu
0d35b1d0b8 Allow negative values in menus 2014-11-25 18:34:02 +08:00
Scott Lahteine
87fc00c182 Expand on More RAM concept, address minor bugs 2014-11-24 20:26:27 -08:00
Scott Lahteine
7681711e7e Clear LCD to welcome_msg if not printing
The welcome message is more appropriate than “resuming print” if
nothing is printing.
2014-11-24 18:50:11 -08:00
Scott Lahteine
aa4160ba62 Relocate click ignore code into info screen 2014-11-24 17:12:08 -08:00
Scott Lahteine
cd769781a1 M0-M1 Enhancements
Allow M0 and M1 to include a message string. Ignore clicks on “Wait for
user” so that the Info Screen stays up.
2014-11-24 16:56:37 -08:00
Scott Lahteine
f40cff59f3 SD Card Alpha Sorting
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
2014-11-24 14:03:20 -08:00
galexander1
90eb266139 Merge pull request #1148 from krasin/travis
Add Travis CI config to build Marlin firmware.
2014-11-16 08:57:31 -05:00
Ivan Krasin
d078c7c29f Add Travis CI config to build Marlin firmware. 2014-11-16 01:46:24 -05:00
galexander1
3dc9e478ad Merge pull request #1143 from Silly105/Marlin_v1
Changed graphic LCD info screen to match the set # of extruders
2014-11-12 17:41:36 -05:00