Commit Graph

3064 Commits

Author SHA1 Message Date
AnHardt
3a27a78f9e Commented REPRAP_DISCOUNT_SMART_CONTROLLER again
and removed some tabs.
2015-04-20 15:01:43 +02:00
AnHardt
064f2b37d0 More Beeper clean up.
Centralised beep code to lcd_buzz().
From gcode_M300() and lcd_quick_feedback().

Enforced max. duration for M300 to 5 seconds.

Corrected description in 'Configuration.h'

LCD_FEEDBACK_FREQUENCY_HZ 0 gives now a silent delay of
LCD_FEEDBACK_FREQUENCY_DURATION_MS.
2015-04-20 11:11:13 +02:00
AnHardt
671aaf2dc9 Minor fix for M300
Corrected wrong order of parameters.
2015-04-19 13:25:20 +02:00
Scott Lahteine
d931220a65 Tweak comments 2015-04-18 23:12:29 -07:00
Scott Lahteine
47847765e2 Add M410 QuickStop command 2015-04-18 23:07:48 -07:00
Scott Lahteine
a4ca87ba99 Merge pull request #1933 from bq/Fix_stray_in_configuration
Fixed compilation error "error: stray ‘\357’ in program"
2015-04-18 03:56:31 -07:00
Scott Lahteine
5e3bb4bdf3 Merge pull request #1931 from paclema/M303_echo
Added new PID autotune info, to make easy copy & paste results to marlin
2015-04-18 03:49:31 -07:00
Scott Lahteine
67a4471324 Merge pull request #1926 from nophead/acceleration_fix
Fixed jump in speed at high accelerations on axes with lots of steps
2015-04-18 03:09:54 -07:00
Ivan Galvez Junquera
b99e63a7bf Fixed compilation error "error: stray ‘\357’ in program" in several configuration files.
Introduced in commit 697ee2dc and later spread to other files.
2015-04-17 16:10:58 +02:00
Bo Herrmannsen
2d1e730216 Update README.md 2015-04-17 15:00:21 +02:00
paclema
581685a231 Added new PID autotune info, to make easy copy & paste results to marlin 2015-04-17 11:15:09 +02:00
Chris Palmer
483384aaa4 Fixed faulty comment merge 2015-04-17 09:31:53 +01:00
Chris Palmer
cc6b7cf3ce Fixed some comment spellings. 2015-04-17 09:28:08 +01:00
Chris Palmer
e4595fa24a Fixed jump in speed when using high accelerations on axes with lots of steps.
I.e., when acceleration * steps per mm > 2,000,000.
This was done by changing MultiU24X24toH16 to take a 32b bit operand.
Removed the claim that stepper.cpp uses the Leib algorithm.
2015-04-16 23:04:38 +01:00
Scott Lahteine
d0b65ff642 Merge pull request #1923 from thinkyhead/babystep_delay_2us
Babystep delay 2us
2015-04-16 07:51:37 -07:00
Scott Lahteine
58d128b7a9 Apply zprobe_zoffset in axis_is_at_home
Ensure the probe offset will always be included when homing Z.
2015-04-16 07:41:19 -07:00
Scott Lahteine
63b98b8280 Raise Z for M401 and M402 2015-04-16 07:24:33 -07:00
Scott Lahteine
53be0f3399 Babystep delay 2us 2015-04-16 04:16:36 -07:00
Scott Lahteine
f49a73d69f Merge pull request #1919 from paclema/M48_mismatch
Fixed M48 mismatch between n and P parameter on documentation
2015-04-16 03:25:23 -07:00
paclema
cde5eee2a5 Removed unnecessary comments 2015-04-15 19:01:09 +02:00
paclema
e1b69db6d1 Fixed M48 mismatch between n and P parameter on documentation 2015-04-15 18:17:58 +02:00
Bo Herrmannsen
d0b1f70118 Update Compilation.md 2015-04-15 16:35:02 +02:00
Bo Herrmannsen
f8389b1076 Update README.md 2015-04-15 15:25:18 +02:00
Scott Lahteine
637babb99b Merge pull request #1915 from elgambitero/Development
Some minor translations to spanish
2015-04-14 19:59:39 -07:00
Scott Lahteine
71f183a3a2 Merge pull request #1913 from CONSULitAS/Development_Update_K8200_Config
Example Configuration for K8200 back in sync
2015-04-14 19:52:47 -07:00
elgambitero
cb9ac490d4 Some minor translations to spanish 2015-04-14 23:14:52 +02:00
CONSULitAS
3851ac6226 Example Configuration for K8200 back in sync
example_configurations\K8200\Configuration.h:
* merge upstream changes from default Configuration.h manually
* add some machine specific comments
2015-04-14 17:12:42 +02:00
CONSULitAS
b447a4ffab Merge remote-tracking branch 'upstream/Development' into Development 2015-04-14 15:35:08 +02:00
Scott Lahteine
d57b23b1e3 Merge pull request #1912 from thinkyhead/some_fixes
Enable all old_z_*_endstop vars for Z_DUAL_ENDSTOPS
2015-04-14 05:12:49 -07:00
Scott Lahteine
7336e6df07 Always define old_z, not always z2 2015-04-14 04:55:20 -07:00
Scott Lahteine
5dd87d2e74 Enable all old_z_*_endstop vars for Z_DUAL_ENDSTOPS
- Potentially addressing #1911
2015-04-14 04:05:51 -07:00
Scott Lahteine
639ffc341e Merge pull request #1910 from thinkyhead/some_fixes
Rename servos[] array in Marlin to servo[]
2015-04-14 03:44:20 -07:00
Scott Lahteine
3f02da646c Make sure axis_active is cleared for #1908 2015-04-14 03:41:37 -07:00
Scott Lahteine
e0e68c5cbc Rename servos[] array in Marlin to servo[] 2015-04-14 03:13:25 -07:00
Scott Lahteine
dee6840c50 Merge pull request #1907 from thinkyhead/some_fixes
Fix type of code_has_value
2015-04-13 18:04:53 -07:00
Scott Lahteine
642f6a92bc fix type of code_has_value 2015-04-13 18:02:17 -07:00
Scott Lahteine
6b51305c4b Merge pull request #1906 from thinkyhead/some_fixes
Naming and code comments
2015-04-13 17:59:48 -07:00
Scott Lahteine
17ad80c1e1 Spacing in XYZ_CONSTS 2015-04-13 17:58:47 -07:00
Scott Lahteine
09d60e0128 Naming and code comments 2015-04-13 17:17:36 -07:00
Scott Lahteine
c05b347617 Merge pull request #1902 from msutas/Development
Fix Syntax Error Filament Runout Statement
2015-04-13 14:31:57 -07:00
Mehmet Sutas
5a9e45cc4a Fix Syntax Error Filament Runout Statement 2015-04-13 22:37:18 +03:00
Scott Lahteine
0908c41156 Merge pull request #1899 from thinkyhead/squash_fixups
Several fixups
2015-04-12 23:31:31 -07:00
Scott Lahteine
257a907456 Fix typo in next_bed_check_ms 2015-04-12 23:17:28 -07:00
Scott Lahteine
e4b1e8651b next_ vars faster than previous_
- Change some `previous_` time vars to `next_` so an add only happens
at intervals
- Fix `HEATER_0_USES_MAX6675` polling too frequently, or not at all
2015-04-12 23:06:50 -07:00
Scott Lahteine
cfa60bdb97 Merge branch 'Development' into squash_fixups
Conflicts:
	Marlin/ultralcd.cpp
2015-04-12 22:51:18 -07:00
Scott Lahteine
ccddc280be Apply three more commits 2015-04-12 22:47:44 -07:00
Scott Lahteine
666f9cd7b4 Merge pull request #1897 from epatel/Development
Manual bed leveling menu fixes.
2015-04-12 21:26:36 -07:00
Scott Lahteine
e7aae314de Merge pull request #1896 from thinkyhead/cold_extrude
Homing fixes
2015-04-12 17:50:19 -07:00
Scott Lahteine
74e4b42f7e Default MACHINE_NAME to "3D Printer" 2015-04-12 17:17:41 -07:00
Scott Lahteine
8857b9e921 Use the extruder argument in plan_buffer_line 2015-04-12 16:57:00 -07:00