android444
77aa16005d
Polish font
...
Add polish font for GLCD displays only.
HD44780 work properly without polish character.
Update language_pl.h.
2017-04-21 21:42:41 -05:00
benlye
3ed737425d
Fix typo in new SET_COM macro
2017-04-21 15:08:18 -05:00
Brian
88649b06a6
use planner.z_fade_height, etc. instead of private, ubl-specific g29 fade height
2017-04-21 09:09:09 -05:00
Scott Lahteine
e0e069c6d8
Clean up trailing whitespace
2017-04-20 17:52:07 -05:00
Scott Lahteine
9b94210394
Bring FLSUN config more up to date
2017-04-20 17:52:06 -05:00
Scott Lahteine
b0aa256bc0
Updates for all configs
2017-04-20 17:52:05 -05:00
Scott Lahteine
ee46ce1743
Add and apply interrupt helper macros
2017-04-20 16:04:29 -05:00
Scott Lahteine
6131c62499
General cleanup
2017-04-20 16:04:29 -05:00
benlye
2c86dfd3b5
Fix compiler type conversion errors after LCD changes
2017-04-20 16:04:29 -05:00
Scott Lahteine
55f9e76610
Merge pull request #6367 from thinkyhead/rc_cleanup_followup
...
Cleanup after some direct commits
2017-04-20 15:13:24 -05:00
Scott Lahteine
d38a792a91
Merge pull request #6382 from MagoKimbra/fix_configuration_store
...
Fix double definition in configuration_store
2017-04-20 15:06:58 -05:00
Scott Lahteine
b98bc034ae
Replace c_assert hack with static_assert
2017-04-19 13:07:35 -05:00
Scott Lahteine
5eb2b1a790
Clear up G29 compiler warnings
2017-04-19 13:07:35 -05:00
Scott Lahteine
4ce2a63db0
Apply const, spacing to Marlin_main.cpp
2017-04-19 13:07:34 -05:00
Scott Lahteine
e97f1284c1
Cleanup of pins testing code
2017-04-19 13:07:34 -05:00
Scott Lahteine
e9b53ae00c
Cleanup after some direct commits
...
https://github.com/MarlinFirmware/Marlin/commit/5e9726530ff21d3bc62beaa6
ac1b9437c276130a
2017-04-19 13:07:34 -05:00
Scott Lahteine
e05d050a1e
Add hex routine to print an address
2017-04-19 13:07:34 -05:00
Scott Lahteine
4542282f5e
Fix broken TOGGLE macro in fastio.h
2017-04-19 12:38:13 -05:00
MagoKimbra
ed52275a14
Fix double definition in configuration_store
2017-04-18 17:57:40 +02:00
Scott Lahteine
de569e3d4e
Merge pull request #6327 from Bob-the-Kuhn/M43-toggle-&-Z-probe-fixes
...
M43 Toggle & Z servo test - fix bug & add another check
2017-04-18 03:21:57 -05:00
Scott Lahteine
f33a650ecc
Merge pull request #6368 from thinkyhead/rc_linear_advance_eeprom
...
Add Linear Advance values to EEPROM and LCD
2017-04-18 02:54:12 -05:00
Scott Lahteine
a00ae4790a
Replace M905 with unique code M900
2017-04-17 16:39:37 -05:00
Scott Lahteine
1286d9603d
Clean up and organize ultralcd.cpp
2017-04-17 16:39:36 -05:00
Scott Lahteine
3cdf78a79f
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
Thomas Moore
f8e77d6545
Add Linear Advance values to EEPROM and enable configuration of K via LCD
2017-04-17 16:39:36 -05:00
Scott Lahteine
eb2d073dae
Add M905 R for setting the E/D ratio directly
2017-04-17 16:39:36 -05:00
Scott Lahteine
69dfa54a84
Use code_value_linear_units for known-linear axes
2017-04-17 16:39:36 -05:00
Scott Lahteine
b956f2642b
Show M503 report with current linear units
2017-04-17 16:39:36 -05:00
Scott Lahteine
ba4a005ceb
Merge pull request #6373 from mtowara/mt_makefile_fix
...
Fix Makefile build
2017-04-17 16:16:37 -05:00
towara
150b15c311
fix compiler errors generated by more stringent flags in Makefile:
...
- use volatile for registers
- avoid implicit casts
2017-04-17 11:59:47 +02:00
towara
f6095c9325
fix missing serial.cpp in Makefile
2017-04-17 11:59:03 +02:00
Scott Lahteine
871f92378c
Tweak headings in EEPROM structure
2017-04-16 18:42:33 -05:00
Scott Lahteine
bf2548be4a
Merge pull request #6362 from tcm0116/babystepping
...
Only queue babysteps if axis is in a known position
2017-04-16 17:46:06 -05:00
dot-bob
9c410ddf68
Fixed an issue where a display with a hardware reset pin (LCD_RESET) may not get initialized properly.
2017-04-15 22:45:15 -06:00
Thomas Moore
72a7fac461
Only queue babysteps if axis is in a known position
2017-04-15 23:19:43 -05:00
Roxy-3D
5e9726530f
Setup to find data corruption and general clean up
...
This data corruption problem is very difficult. Just changing the code
a little bit changes whether the problem even happens and what is
affected. I need these changes in the main branch so I can operate with
the extra debug code always available and turned on.
Everything is setup such that if M100 is turned off or DEBUG(ECHO) is
turned off, the code is not affected. M100 has been made a little bit
more inteligent so it can display the serial command buffers in a more
meaningful way (because the data corruption seems to often times end up
in that area).
2017-04-15 19:26:43 -05:00
Scott Lahteine
e519e95953
Merge pull request #6358 from thinkyhead/rc_doubleclick_fix
...
Show Cancel/Continue screen for ABL "Level Bed"
2017-04-15 17:25:37 -05:00
Scott Lahteine
a81606c680
Show Cancel/Continue screen for ABL "Level Bed"
2017-04-15 16:51:03 -05:00
Scott Lahteine
51021bc7b8
Merge pull request #6353 from thinkyhead/rc_endstop_coolness
...
Clean up endstop triggering code
2017-04-15 16:49:54 -05:00
Scott Lahteine
857dec0990
Merge pull request #6342 from benlye/benlye-fix-softspi
...
Fix softspi variant conditional for 1284p
2017-04-15 16:33:50 -05:00
Scott Lahteine
4e04383d18
Merge pull request #6354 from thinkyhead/rc_doubleclick_fix
...
Fix undefined symbol if DOUBLECLICK_FOR_Z_BABYSTEPPING and HAS_BED_PROBE defined
2017-04-15 16:06:29 -05:00
Thomas Moore
8dd0492e68
Show lcd_babystep_zoffset screen if DOUBLECLICK_FOR_Z_BABYSTEPPING is enabled and HAS_BED_PROBE is defined
2017-04-15 14:44:50 -05:00
benlye
0a2f60fab4
Make spi.h inclusion conditional
...
spi.h is only needed if HEATER_0_USES_MAX6675 is defined, so making its inclusion conditional on HEATER_0_USES_MAX6675 being defined.
2017-04-15 16:22:42 +01:00
Bob-the-Kuhn
60471b7592
minor improvements
...
Configuration_store.cpp - changed a couple of print statements so the
values were printed. The old method resulted in the formula being
printed.
ubl_G29
1) added support for R option to P4. Now probes all points unless R is
present and the number is greater than 0.
2) P2 - moved map print statement so it showed the point that was
currently being probed, The old location did this only for the first
point.
3) P4 - Moved the map print for the same reason.
ultralcd.cpp - changed "Mesh Editor :" to "Mesh Editor" because the LCD
draw routine puts a ":" in automatically so you end up with an extra ":"
using the old message.
2017-04-15 09:31:55 -05:00
Scott Lahteine
25a61e9061
Improve motion-based endstop triggering code
2017-04-15 06:16:50 -05:00
Scott Lahteine
a2356c2825
Fix compiler warning about z-offset callback
2017-04-15 02:50:27 -05:00
Scott Lahteine
037c964d26
Reverse bools on prepare_move sub-functions
2017-04-15 01:08:19 -05:00
Scott Lahteine
d9c4333806
Extra logging of Dual X modes
2017-04-15 01:08:19 -05:00
Scott Lahteine
4067d15c92
Cleanup, extend TMC2130 implementation
2017-04-14 23:00:00 -05:00
Scott Lahteine
d60c02c5b1
Cleanup, extend TMC2130 configuration
2017-04-14 22:43:56 -05:00
