Commit Graph

975 Commits

Author SHA1 Message Date
Scott Lahteine
02550af7c3 Merge pull request #3453 from thinkyhead/rc_jbrazio_m190
ELAPSED / PENDING for rollover-safe time checking
2016-04-10 20:25:02 -07:00
Scott Lahteine
803845ec18 Add a case for M113 to process_next_command 2016-04-10 18:53:03 -07:00
Scott Lahteine
386140f361 Test time difference in safe way 2016-04-10 18:09:31 -07:00
Scott Lahteine
1b7356b3a1 Account for home_offset in G29 handler 2016-04-10 15:35:02 -07:00
Scott Lahteine
f3562dd895 Have M206 alter current_position, M428 use new function 2016-04-10 15:35:01 -07:00
Scott Lahteine
6d465321b5 Adjust timeout code in host_keepalive 2016-04-09 16:58:17 -07:00
Scott Lahteine
50c3140040 Merge pull request #3414 from thinkyhead/rc_host_timeout_mods
Host Keepalive configurable timeout with 2s default
2016-04-08 21:45:45 -07:00
Scott Lahteine
1acf901b63 Adjustments to residency_start_ms handling 2016-04-08 21:20:23 -07:00
gralco
907aed57db Fix bug which can cause an infinite M109 loop
Since residency_start_ms is -1 when entering the heatup while loop whilst the hotend temp is close to the target them already then it may not escape.

Hence "Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time."
2016-04-08 21:20:23 -07:00
jbrazio
dd3a06a95a Implemented M155 and M156, a generic TWI/I2C interface for Marlin 2016-04-08 20:14:37 -07:00
Scott Lahteine
843aa90b5a Merge pull request #3434 from thinkyhead/rc_more_debug_leveling
Additional debug leveling output
2016-04-08 18:57:18 -07:00
Scott Lahteine
a644ab1de4 Minor patch ups to G29
This may fix a subtle bug caused by doing `G29` more than once without
`G28` between.
2016-04-08 17:53:15 -07:00
Scott Lahteine
cba2698871 Additional DEBUG_LEVELING output 2016-04-08 17:53:15 -07:00
Scott Lahteine
5e18d650c4 Merge pull request #3427 from thinkyhead/rc_better_SERIAL_ECHOPAIR
No casting needed for SERIAL_ECHOPAIR
2016-04-07 19:29:18 -07:00
Scott Lahteine
e0b0d1eb6b Add M113 to get/set Host Keepalive 2016-04-07 19:25:56 -07:00
Scott Lahteine
85883da90c Implement basic HOST_KEEPALIVE_INTERVAL 2016-04-07 19:25:56 -07:00
Scott Lahteine
098fb8f8c9 Merge pull request #3413 from thinkyhead/rc_probe_G30_position
Report the probe position in G30
2016-04-07 19:25:33 -07:00
Scott Lahteine
c9c7c66b95 Merge pull request #3421 from jbrazio/bugfix/m109-EXTRUDE_MINTEMP-expansion
M109: Protect against EXTRUDE_MINTEMP expansion
2016-04-07 19:18:34 -07:00
Scott Lahteine
d7cbb2eec9 Merge pull request #3403 from jbrazio/feature/stopwatch
Print job timer rework
2016-04-07 19:18:03 -07:00
Scott Lahteine
dc19b69697 No casting needed for SERIAL_ECHOPAIR 2016-04-07 16:33:21 -07:00
João Brázio
471d30cc1c
M109: Protected against EXTRUDE_MINTEMP expansion 2016-04-07 12:50:57 +01:00
João Brázio
7c7e30f4cc
Adherence to the new OOP coding standards 2016-04-07 12:41:09 +01:00
Scott Lahteine
865dcf3fb4 Fix FILAMENT_WIDTH_SENSOR measurement
Only measure and store filament width when E is going forward.
2016-04-06 19:48:04 -07:00
Scott Lahteine
2f6c5fe2da Report the probe position in G30 2016-04-06 16:55:21 -07:00
João Brázio
e48d0263bf Bugfix: M32 was still using the old print timer 2016-04-06 04:41:36 +01:00
João Brázio
e8b80d8c20 Implemented M75, M76, M77 to control the print timer 2016-04-06 04:38:42 +01:00
João Brázio
eb61051556 Rework the print job timer to use the stopwatch class 2016-04-06 04:34:03 +01:00
Scott Lahteine
98f2e9fc83 Reduce string storage required for DEBUG_LEVELING 2016-04-05 19:04:42 -07:00
Scott Lahteine
1af5d7b35f Add more leveling-debug output 2016-04-05 18:31:10 -07:00
Scott Lahteine
56e8e2b0eb Final tweaks to M111 output 2016-04-04 15:36:07 -07:00
João Brázio
d819a4aff9 Fixes #3346, followup #3343: variables must defined with the static keyword to work with PROGMEM when defined inside functions 2016-04-04 15:02:18 +01:00
Scott Lahteine
de39056f68 Merge pull request #3343 from thinkyhead/rc_fix_m111_output
Fix M111 output using pgm_read_word, as required
2016-04-03 17:44:38 -07:00
Scott Lahteine
fd0ac371b0 Fix M111 output using pgm_read_word as required
As noted by @taratata2016 in https://github.com/MarlinFirmware/Marlin/issues/3300#issuecomment-204687275
2016-04-03 17:33:06 -07:00
Scott Lahteine
d771174797 Merge pull request #3337 from esenapaj/patch-2
suppress warnings
2016-04-03 17:01:22 -07:00
Scott Lahteine
d24f14a799 Add HAS_TEMP_HOTEND define 2016-04-03 16:18:49 -07:00
esenapaj
f9e1a0ee6c suppress warnings 2016-04-04 06:48:53 +09:00
Scott Lahteine
80b8fd1cad Add MSG_HOME_OFFSETS_APPLIED 2016-04-02 18:14:49 -07:00
Scott Lahteine
bc86ee0271 Simplify homeaxis with some macros 2016-03-30 18:44:05 -07:00
Scott Lahteine
82ef101ed5 Deploy & Stow in G29 for Delta + Z Servo Endstop 2016-03-30 16:41:16 -07:00
Scott Lahteine
de333c4fea Merge pull request #3279 from thinkyhead/rc_filament_width_sensor
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
2016-03-30 12:16:27 -07:00
Scott Lahteine
8def2c31db Merge pull request #3284 from thinkyhead/rc_stop_watchheat_lcdset0
Fix temperature checking conditions (backwards!)
2016-03-30 12:10:39 -07:00
Scott Lahteine
8bf5f7c676 Merge pull request #3282 from jbrazio/bugfix/m104-timer-wont-start
M104 not starting the print timer
2016-03-30 11:54:16 -07:00
Scott Lahteine
31450ad498 Fix temperature checking conditions (backwards!) 2016-03-30 11:52:03 -07:00
João Brázio
187c183c20 M104 was not starting the print timer 2016-03-30 11:33:24 +01:00
Scott Lahteine
507aef055f Patch broken M404 2016-03-29 20:54:31 -07:00
Scott Lahteine
1a79b13b7a FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR 2016-03-29 20:54:31 -07:00
Scott Lahteine
5f32184254 Merge pull request #3278 from thinkyhead/rc_cleanup_m111_redo
Echo all debug levels in M111, default to DEBUG_NONE
2016-03-29 20:34:31 -07:00
Scott Lahteine
05765fb570 Add DEBUGGING macro 2016-03-29 19:50:01 -07:00
Scott Lahteine
4402760739 Echo all debug levels in M111, default to DEBUG_NONE
Redo of #3268 by @jbrazio
2016-03-29 19:18:45 -07:00
Scott Lahteine
f0b96f5cae Merge pull request #3276 from thinkyhead/rc_sdprint_and_lcd_sleuth
Refinements, fixes, reduced stack usage in CardReader
2016-03-29 18:30:18 -07:00
Scott Lahteine
12c0bf9521 Merge pull request #3277 from jbrazio/bugfix/m190-temp-never-reached
M190 bed temp is never reached
2016-03-29 18:28:51 -07:00
João Brázio
c6577aea60 M190 bed temp was never reached 2016-03-30 01:03:20 +01:00
Scott Lahteine
27d70599d4 Change openFile default to "not-push" instead of "do-replace" 2016-03-29 03:16:35 -07:00
Scott Lahteine
3252df7998 Minor cleanup to filament sensor code 2016-03-28 20:04:34 -07:00
Scott Lahteine
0b8ef5eba6 Split get_command into units, rename to get_available_commands 2016-03-28 06:00:04 -07:00
Scott Lahteine
545f7997ea Continue on empty lines instead of returning 2016-03-28 05:37:36 -07:00
Scott Lahteine
3dcf6d42ff Don't store escaped serial characters if comment_mode 2016-03-28 05:37:36 -07:00
Scott Lahteine
5f8e52aefb Minor cleanup to command dispatcher 2016-03-28 05:37:36 -07:00
Scott Lahteine
f1ed310322 Add NUMERIC compare macros to simplify code 2016-03-28 03:52:49 -07:00
jbrazio
443e6d26fe Formatted multi-line comments 2016-03-27 04:36:36 +01:00
Scott Lahteine
e4039a9b5b Merge pull request #3250 from esenapaj/patch-1
Fix typo
2016-03-26 00:41:31 -07:00
Scott Lahteine
cd4c3e90bc Send a busy signal every 10 seconds instead of every 2 2016-03-25 22:15:40 -07:00
Scott Lahteine
26168676e7 Merge pull request #3246 from thinkyhead/rc_fix_numeric_filenames
Fix: current_command_args skips digits at the front
2016-03-25 16:38:36 -07:00
esenapaj
f54315c728 Fix typo
These are salvaged from closed-PR #3216.
2016-03-26 08:37:17 +09:00
Scott Lahteine
f423716c6a Fix: current_command_args skips digits at the front
Closes #3245
2016-03-25 16:12:41 -07:00
Scott Lahteine
18de9f55ac Merge pull request #3242 from thinkyhead/rc_epatel_mesh_fixes
Updated Mesh Bed Leveling
2016-03-25 06:48:12 -07:00
Scott Lahteine
3a1e6b1752 Merge pull request #3243 from AnHardt/homed
axis_known_position -> axis_homed
2016-03-25 06:36:46 -07:00
AnHardt
94962ee678 axis_known_position -> axis_homed
In all these cases we want the axis to be homed. If we could have lost
some steps is secondary.

Reenables homing seperate axis with DISABLE_X / DISABLE_Y true.
2016-03-25 14:05:20 +01:00
Edward Patel
14afe1a017 Move to Z=0 for G28 when using Manual Bed Leveling
copy of 406992f9dd
2016-03-25 04:58:44 -07:00
Edward Patel
c606ed447a Add "G29 S4" to fine tune Z level for Mesh Bed Leveling.
Also add mbl.z_offset to the EEPROM, bumping the version to V23.
2016-03-25 04:58:43 -07:00
Scott Lahteine
5d8036e554 Code cleanup around MOTOR_CURRENT_PWM options 2016-03-25 04:23:46 -07:00
Scott Lahteine
0da744b7b0 Further cleanup of comments, partial Doxygen-style
Following up on #3231
2016-03-25 00:45:56 -07:00
Scott Lahteine
4823791eb0 Merge pull request #3228 from esenapaj/patch-1
Fix spelling
2016-03-25 00:40:51 -07:00
jbrazio
5e5d250832 Added gplv3 header to all Marlin files 2016-03-24 18:01:20 +00:00
esenapaj
89a845659a Fix spelling
PROBABLE ->PROBEABLE
This is follow-up to #3069?
2016-03-25 02:13:37 +09:00
Scott Lahteine
af32a7d5d6 M120/M121 also set endstops non-homing state 2016-03-24 03:24:23 -07:00
Scott Lahteine
04fa9d4f47 Make Autotune options into Menu Edit Items 2016-03-24 02:00:08 -07:00
WPBack
e3f583a3be Fixes for PID AutoTune from menu
Fixes for #3189

Setting a temp is still missing
2016-03-24 01:47:30 -07:00
WPBack
3b3e8a02b5 Initial implementation of PID Autotune Menu Items
Adds the parameter U to M303. If U1 is included , it will use the
PID-values from the auto-tune.
2016-03-24 01:46:37 -07:00
Scott Lahteine
c5857f96c8 Merge pull request #3182 from thinkyhead/rcbugfix_printrboard_revf
Add support for Printrboard RevF
2016-03-24 00:12:06 -07:00
Scott Lahteine
f774420488 Merge pull request #3196 from thinkyhead/rc_controllerfan_bug
Make DISABLE_INACTIVE_X, etc., true if missing
2016-03-24 00:11:46 -07:00
AnHardt
1c6a16d5bb Send position updates to RH
Send position updates to RH where RH can not know the end position.

For example after G28 RepetierHost assumes to be at the homing-point,
but with a servo probe we are much higher. Now the RH-software-endstops
will prevent us from going down (if activated). With this patch the
internal position of RH is updated with `current_position[]`.
2016-03-23 13:30:50 +01:00
AnHardt
6486e8b74a Call buzz() directly from M428 2016-03-22 15:05:04 +01:00
Scott Lahteine
b1a3a95ad4 Tweak controllerFan to save a cycle or two 2016-03-20 22:11:09 -07:00
Scott Lahteine
10caee2b7c Merge pull request #3187 from AnHardt/target_extruder_number
Fix extrudernum in MSG_INVALID_EXTRUDER
2016-03-20 17:15:22 -07:00
Scott Lahteine
1cc316f1fd Merge pull request #3082 from thinkyhead/updated_2820
This is quite comprehensive. If probes are disabled in any case when they shouldn't be, I'm sure we will hear about it soon.
2016-03-20 17:10:38 -07:00
Scott Lahteine
7bf5d117e7 Merge pull request #3069 from thinkyhead/rc_delta_compat_m48
Delta-compatible extensions to M48
2016-03-20 17:09:18 -07:00
Scott Lahteine
06332f20be Merge pull request #3113 from jbrazio/bugfix/3061-stop-print-time-counter
Stop print timer with M105/M109
2016-03-20 17:05:07 -07:00
AnHardt
338b69c24b Fix extrudernum in MSG_INVALID_EXTRUDER
SERIAL_ECHO is not very good in printing uint8_t - so cast. to int.
2016-03-20 11:39:06 +01:00
AnHardt
b39b54031b Fix KEEPALIVE_STATE
Add return to NOT_BUSY for M105
Replace WAIT_FOR_USER with PAUSED_FOR_USER

Add Travis test for FILAMENTCHANGEENABLE
2016-03-20 10:41:56 +01:00
Scott Lahteine
41145e6e81 Patch drain_queued_commands_P
Fix a SNAFU that should have been caught in #3012
2016-03-19 20:10:41 -07:00
Scott Lahteine
59483221d5 Move stepper DAC to a separate file 2016-03-19 19:24:26 -07:00
Scott Lahteine
5d0570cea0 Make digitalPotWrite depend on HAS_DIGIPOTSS 2016-03-19 19:24:26 -07:00
Scott Lahteine
f96bc03081 Add M907-M910 g-codes support for Printrbot Rev. F 2016-03-19 19:24:26 -07:00
Scott Lahteine
cf7c444aff Apply unknown_position_error elsewhere 2016-03-19 05:13:40 -07:00
Scott Lahteine
eda5190581 Check for known position in M48 2016-03-19 05:13:40 -07:00
Scott Lahteine
68085ca855 Updated M48 friendly for DELTA
Partial implementation with reference to MarlinFirmware/Marlin#3011
2016-03-19 05:13:40 -07:00
Scott Lahteine
38b0082bf2 Additional tweaks to M42 exit conditions 2016-03-19 03:10:18 -07:00
Scott Lahteine
4bbea5124d Support for multiple PWM fans 2016-03-19 03:10:18 -07:00
Scott Lahteine
637cc03686 Fix M109 so it won't wait for cooling
Addressing issue #2767
2016-03-19 03:00:58 -07:00