Scott Lahteine
8d814de558
Return void in prevent_dangerous_extrude
2015-05-12 00:55:00 -07:00
Scott Lahteine
367e2eb9f4
Global setup_for_endstop_move
2015-05-12 00:51:22 -07:00
Scott Lahteine
fa951f8a0b
Always do st_synchronize() before G28
2015-05-12 00:31:51 -07:00
Scott Lahteine
8a0dc4d54a
Merge pull request #1922 from Wurstnase/serial_wait
...
Serial wait
2015-05-10 23:10:25 -07:00
Wurstnase
526ad82d20
activate advanced_ok and no_timeout
2015-05-11 08:01:51 +02:00
Scott Lahteine
4097207c75
Merge pull request #2041 from thinkyhead/watch_temp
...
More thermal protection
2015-05-10 21:39:05 -07:00
Scott Lahteine
45d64040fe
Merge pull request #2048 from Wurstnase/hit_bits
...
replace some bools
2015-05-10 20:37:17 -07:00
Scott Lahteine
9b3d4380d3
Only watch the heater that was set
2015-05-10 20:26:45 -07:00
Scott Lahteine
52c0696e44
Merge pull request #2044 from thinkyhead/fix_servos_too
...
Make some z probe and servo code tweaks
2015-05-10 20:10:42 -07:00
Wurstnase
b55f32f8a1
replace some bools
...
this PR replaces some bools with one char. this will safe 3 bytes and should also be sometimes a little bit faster.
2015-05-10 21:37:39 +02:00
Laurent DELAGE
e70e6e2b48
Correction traductions
2015-05-10 15:38:50 +02:00
Scott Lahteine
f73f4ce555
Make some z probe and servo code tweaks
2015-05-09 19:11:19 -07:00
Scott Lahteine
28c87ec81b
Disable all heaters on temp error
2015-05-08 23:17:25 -07:00
Scott Lahteine
79106638a8
Fix documentation of heating sanity check
2015-05-08 22:50:08 -07:00
Scott Lahteine
6110494a56
Change default to 4°C in 16s
2015-05-08 22:41:12 -07:00
Scott Lahteine
54deb9eea3
Enable WATCH_TEMP_PERIOD by default
2015-05-08 22:36:02 -07:00
Scott Lahteine
deedb00c18
Document WATCH_TEMP_PERIOD
2015-05-08 22:25:51 -07:00
Scott Lahteine
be77cfd895
Merge pull request #2032 from Wurstnase/toshiba_for_all_stepper
...
We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER …
2015-05-08 20:32:30 -07:00
Scott Lahteine
cb4ea75fab
Support for MKS BASE 1.0 board
2015-05-08 19:07:37 -07:00
Scott Lahteine
0e70511381
Merge pull request #2036 from brupje/mainline
...
Fixes for reprapworld's keypad
2015-05-08 18:19:31 -07:00
Wurstnase
0cb87795a3
advanced 'ok'
...
ok N(linenumber) P(bufferremaining)
the host can use this to send the data much faster.
Some pseudo code:
If (bufferremaining > 0) send command
## as long there is free buffer send command
Also
if (linenumber > lastsend - bufferremaining) send command
## as long last linenumber received is bigger than lastsend (host) - last bufferremaining received
2015-05-08 22:28:51 +02:00
Wurstnase
182e0d99c9
Merge remote-tracking branch 'Marlin8bit/Development' into serial_wait
2015-05-08 21:27:18 +02:00
brupje
d1148a0198
Rename Configuration_megatronics.h to Configuration.h
2015-05-08 14:36:23 +02:00
Scott Lahteine
7f3252eea9
Merge pull request #1999 from paclema/Filrunout_configurable_script
...
Added configurable script for filrunout from configuration.h
2015-05-08 04:39:59 -07:00
Scott Lahteine
181ccc884c
Edit thermal runaway description
2015-05-07 20:46:03 -07:00
Wurstnase
073e4af7e2
We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER are also good for non-Toshiba stepper driver.
2015-05-07 18:55:47 +02:00
brupje
b7fcb11580
Added example configuration for Megatronics
2015-05-07 13:18:05 +02:00
brupje
8f8174dc93
Revert "Default configuration for megatronics."
...
This reverts commit 22e0d2afcb
2015-05-07 13:12:17 +02:00
Scott Lahteine
79633a74ab
Fix MBL compile error
2015-05-06 14:25:13 -07:00
brupje
ba9741139e
Clean up pins file for megatronics
2015-05-05 14:01:52 +02:00
brupje
22e0d2afcb
Default configuration for megatronics.
2015-05-05 14:01:20 +02:00
brupje
816aa19861
Up/down buttons were reversed, swapped the assignments
2015-05-05 13:04:46 +02:00
brupje
df4d50579a
This is conflicting with the settings in ultralcd.h. Not sure why it' s redefined here anyway.
2015-05-05 12:47:24 +02:00
brupje
8f8bf3a897
Make Marlin actually compile when #define REPRAPWORLD_KEYPAD is uncommented
2015-05-05 11:03:20 +02:00
Scott Lahteine
777f2d3820
Merge pull request #2018 from fmalpartida/bugFixing
...
Bug corrected: persistent HOMING message when HOME button pressed for homing.
2015-05-05 00:12:32 -07:00
Scott Lahteine
ecb46de349
Merge pull request #2013 from bq/Fix_lowercase
...
Fixed lowercase change missing on commit a22a228b
2015-05-04 23:50:56 -07:00
fmalpartida
150a35eff8
Bug corrected:
...
Persistent homing message.
Message was declared as an alert, therefore it was persistent.
Updated to message.
2015-05-04 19:48:49 +02:00
Gina Häußge
ab246ab032
Reverting changes to error messages on serial console
...
This reverts the changes done to the error message for line number mismatches done in commit d43cc2dd5f
2015-05-04 15:03:00 +02:00
Ivan Galvez Junquera
59529b755d
Fixed lowercase change missing on commit a22a228b.
...
Servo.cpp and Servo.h were changed to lowercase in Makefile but not their actual filenames.
2015-05-04 09:44:34 +02:00
Scott Lahteine
df4c104637
Merge pull request #2012 from BrianGilbert/Development
...
Add example configuration for Boots Industries V2.5 Delta Printer
2015-05-03 20:42:32 -07:00
Scott Lahteine
1f039cde61
Merge pull request #1992 from thinkyhead/too_many_probes
...
Stow Z probe on M402 without extra raise
2015-05-03 20:40:26 -07:00
Brian Gilbert
1285784a49
Add Boots Industries V2.5 example configuration
2015-05-04 09:10:42 +10:00
Scott Lahteine
35493e1af9
Tweak to planner.cpp position.debug
2015-05-03 16:03:05 -07:00
paclema
26015b02d8
Fixed typo and updated Configuration.h of configurator
2015-05-03 02:39:34 +02:00
paclema
aedd580911
Updated all configuration.h examples
2015-05-03 02:28:43 +02:00
Scott Lahteine
2c892fca6a
Cleanup of language.h
2015-05-01 21:38:32 -07:00
Scott Lahteine
2db384a21d
Fix compile error in configuration_store.cpp
2015-05-01 21:15:26 -07:00
Scott Lahteine
ca8cec8e8a
Merge pull request #1998 from paclema/Filament_runout_fix
...
Fixed sintaxis error of filament runout
2015-04-29 19:53:25 -07:00
Scott Lahteine
425cd46c12
Merge pull request #1993 from AnHardt/TRP-bed
...
Enable TRP for the bed
2015-04-29 19:44:50 -07:00
Scott Lahteine
d4c74b8f8c
Don't apply M428 if an error occurs
...
- Also move audio feedback into the command
- Added shorthand for `lcd_buzz` availability
2015-04-29 19:05:48 -07:00
