93cd66ac11
Tweaky change from (C) to (c)
2019-06-27 23:58:16 -05:00
6bd0a0be97
Relocate DUE Stepper ISR to TC0,2 ( #13481 )
2019-03-25 22:39:51 -05:00
1f7e220387
Make HAL ISR macros function-like
2019-03-10 20:44:27 -05:00
0feeef2604
Update copyright in headers
2019-02-12 15:30:11 -06:00
f5eab912ed
Apply #pragma once, misc cleanup ( #12322 )
...
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
2018-11-04 02:25:55 -06:00
6a3207391f
Remove obsolete HAL_timer_restrain
2018-08-31 16:17:22 -05:00
a215725df6
Fix stepper pulse timing
...
Always honor minimum period on stepper pulse generation, and fix timing calculations
Signed-off-by: etagle <ejtagle@hotmail.com>
2018-06-12 21:34:24 -05:00
4dbec774b5
HAL_*_TIMER_RATE => *_TIMER_RATE
2018-06-12 16:39:12 -05:00
206014a957
Fix LPC176x timer functions
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-20 01:58:51 -05:00
37b15fe4cf
Reorder HAL timer header items
2018-05-13 16:50:39 -05:00
0c428a66d9
Proper AVR preemptive interrupt handling ( #10496 )
...
Also simplify logic on all ARM-based interrupts. Now, it is REQUIRED to properly configure interrupt priority. USART should have highest priority, followed by Stepper, and then all others.
2018-04-23 22:05:07 -05:00
97e8a6ebd9
Various fixes for DUE... ( #10152 )
...
- Watchdog reset during SD Card initialization.
- Move `DebugMonitor` to `DebugMonitor_Due.cpp`.
- Since the watchdog is enabled on boot do extra resets during init.
- Have `thermalManager` do watchdog reset before its ISR starts to prevent reset.
- Ensure that timers are stopped before reprogramming them to address tone issues.
- Improve SAM3XE reset when reflashed through the native port.
2018-03-21 19:04:45 -05:00
53362b81cc
Tone fixes/changes ( #10151 )
2018-03-19 04:48:06 -05:00
3c58ca181c
[2.0.x] Correct step pulse width on LPC1768, DUE & Teensy35_36 ( #10016 )
2018-03-09 02:11:28 -06:00
98d48fc731
Followup to HAL_timer_restrain
...
Followup to #9985
2018-03-07 22:18:37 -06:00
d45f19d385
Remove Unicode from var name
2018-03-07 19:08:44 -06:00
a1a88ebabc
HAL function to ensure min stepper interrupt interval ( #9985 )
2018-03-07 17:53:25 -06:00
f2c0ed193d
Add tone support for Due ( #9807 )
2018-02-25 10:48:14 -06:00
a810e585db
Drop HAL_timer_set_count
2018-02-20 03:10:39 -06:00
03d790451f
[2.0.x] HAL timer set/get count => set/get compare ( #9581 )
...
To reduce confusion over the current timer count vs. the compare (aka "top") value. Caution: this re-uses the function name, changing its meaning.
2018-02-10 20:42:00 -06:00
ac368f2788
Add STEPPER_ISR_ENABLED() to HALs
...
Some also get a `HAL_timer_interrupt_enabled` function.
2018-01-14 21:07:10 -06:00
6149b82119
Allow setting current timer counter
2017-12-10 18:38:53 -06:00
82ef6b5242
Add an option to specify "pulse" timer
2017-12-10 18:38:53 -06:00
b8bc965414
General cleanup HAL timers
2017-12-10 18:38:52 -06:00
de3d3b9cb1
Put FORCE_INLINE before static
2017-12-08 00:46:22 -06:00
2246316605
Fix name collision. timer_t => hal_timer_t
2017-11-05 19:31:07 -06:00
9e699811d2
Make LPC1768 pinmapping not specific to Re-ARM ( #8063 )
...
* Merging early because of build failures. See #8105
* Make LPC1768 pinmapping not specific to Re-ARM
* Add HAL_PIN_TYPE and LPC1768 pin features
* M43 Updates
* Move pin map into pinsDebug_LPC1768.h
* Incorporate comments and M226
* Fix persistent store compilation issues
* Update pin features
* Update MKS SBASE pins
* Use native LPC1768 pin numbers in M42, M43, and M226
2017-10-26 13:37:26 -05:00
8315a8a716
Apply fixes for DUE
...
Alternative to #7882 . If F_CPU is greater than 1000 it can be evenly divided by 8. Over 10000, 16; over 100000, 32; over 1 million, 64; etc.
2017-10-07 14:31:18 -05:00
2af62a5d8d
Apply spacing, const to some HAL code
2017-08-31 18:33:07 -05:00
cfef925559
HAL for DUE architecture
2017-08-31 18:15:07 -05:00
Scott Lahteine