MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
5,834 Commits 1 Branch 0 Tags 129 MiB
9cb596e88c
Commit Graph

1355 Commits

Author SHA1 Message Date
João Brázio
c711701626 Implements a nozzle parking command (G27) 2016-07-16 12:07:59 +01:00
João Brázio
5f368d1bc3 Followup for #4320 2016-07-16 11:57:35 +01:00
João Brázio
d7c51bc4b9 Merge pull request #4320 from jbrazio/followup/4307 
Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define
 2016-07-16 11:48:00 +01:00
Scott Lahteine
e563634a25 Merge pull request #4314 from AnHardt/use-d_b_m_t-in-g28 
Use do_blicking_move_to*() in G28
 2016-07-15 20:22:02 -07:00
Scott Lahteine
59ae1811c2 Merge pull request #4303 from AnHardt/delta-g28 
DELTA: Move out of the clip-zone after G28
 2016-07-15 20:20:22 -07:00
João Brázio
fdea8b6e6a Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define 2016-07-16 03:59:49 +01:00
AnHardt
d2a49c016d DELTA: Move out of the clip-zone after G28 
Move down to a safe height after G28 for DELTAs.
 2016-07-15 15:22:44 +02:00
AnHardt
46994fd17d Use do_blicking_move_to*() in G28 2016-07-15 15:02:15 +02:00
João Brázio
ffbb31b235 Fixes an PSTR overflow with print_xyz() 2016-07-15 11:25:34 +01:00
Scott Lahteine
cec7110409 Merge pull request #4308 from thinkyhead/rc_debug_gcode_t 
Added logging related to gcode_T
 2016-07-14 19:46:33 -07:00
Scott Lahteine
166f19251e Add more debugging for leveling 
- Especially in `gcode_T`
- In `update_software_endstops`
- Some tweaks to observe
 2016-07-14 19:04:13 -07:00
Scott Lahteine
7ac0b91a45 Collapsible long comment in gcode_T 2016-07-14 18:28:41 -07:00
João Brázio
e71a631f8f do_blocking_move_*() no longer depend on HAS_BED_PROBE 2016-07-15 01:54:14 +01:00
Scott Lahteine
8bf6861af8 Merge pull request #4054 from jbrazio/feature/g12-clean-tool 
Implements clean nozzle feature (Lulzbot's REWIPE)
 2016-07-14 14:38:38 -07:00
Scott Lahteine
1618870c84 card.printingHasFinished does print_job_timer.stop 2016-07-14 11:39:58 -07:00
Scott Lahteine
34da77dad3 Simply run M31 at the end of an SD print 2016-07-14 11:39:58 -07:00
Scott Lahteine
a8d71f0ac6 Support longer print times in M31 2016-07-14 11:39:58 -07:00
Scott Lahteine
e481b79af1 Allow stopwatch and printcounter to go over 18 hours 2016-07-14 11:39:57 -07:00
João Brázio
4937f9ada4 Minor G12 tweaks and point_t struct extension 2016-07-14 00:07:36 +01:00
João Brázio
021544f572 Improves G12 zig-zag pattern 2016-07-13 21:14:56 +01:00
João Brázio
b05a75655a Implements a nozzle cleaning pattern generator (G12) 2016-07-13 21:14:19 +01:00
Scott Lahteine
4f77adddbe Merge pull request #4286 from thinkyhead/rc_debug_clean 
Prefix and suffix in debug output
 2016-07-12 20:49:15 -07:00
Scott Lahteine
e5c7af5ddc Merge pull request #4222 from thinkyhead/rc_allow_cold_extrude 
M302: Add "P" parameter, status output
 2016-07-12 20:40:14 -07:00
Scott Lahteine
2224032568 Merge pull request #4285 from thinkyhead/rc_manual_move_fast_fine 
No delay for the smallest LCD moves
 2016-07-12 20:16:38 -07:00
Scott Lahteine
d4c68279c8 Add "P" parameter to M302 2016-07-12 20:04:15 -07:00
Scott Lahteine
a8b6b6a128 Merge pull request #4252 from thinkyhead/rc_rename_hpb 
Replace PLA/ABS preheating with generic
 2016-07-12 20:00:33 -07:00
Scott Lahteine
1e14df876d Use varname as prefix in DEBUG_POS, string as suffix 2016-07-12 19:58:09 -07:00
Scott Lahteine
9e8b3e5ee6 Homing direction is irrelevant in probe raise! 2016-07-12 18:09:02 -07:00
Scott Lahteine
4865447830 Merge pull request #4276 from esenapaj/Suppress-warnings 
Suppress warnings
 2016-07-11 19:08:59 -07:00
esenapaj
58177a1602 Suppress warnings 2016-07-12 08:22:24 +09:00
AnHardt
7bcab26f2a Don't deploy/stow the probe if z-min-endstop is used for homing 
Don't deploy/stow the probe if z-min-endstop is used for homing.
Don't apply `zprobe_zoffset` if probe was not used.
 2016-07-11 22:01:44 +02:00
AnHardt
e92e58df1f Adjust wait_for_cooling slope 
Adjust wait_for_cooling slope
and drop mintemp for cooling.

See
https://github.com/MarlinFirmware/Marlin/pull/4169#issuecomment-231544532
 2016-07-11 03:36:23 +02:00
Scott Lahteine
ee0983ab57 Further reduction when HOTENDS == 1 2016-07-10 16:54:30 -07:00
Scott Lahteine
f9e08b1fcd Merge pull request #4254 from AnHardt/killscreen 
Add a kill-screen
 2016-07-09 20:44:42 -07:00
AnHardt
faac2bcfdb Add a kill-screen 2016-07-10 04:50:45 +02:00
Scott Lahteine
3b3e52616c Merge pull request #4253 from thinkyhead/rc_clexpert_runout 
Runout Sensor without SD Card, Print Timer support in M104
 2016-07-09 19:10:36 -07:00
Scott Lahteine
4cd045791c Reduce code size by trusting the compiler 2016-07-09 18:17:44 -07:00
Scott Lahteine
a8538bd7ce General cleanup, code reduction in Marlin_main.cpp 2016-07-09 18:17:44 -07:00
Scott Lahteine
1026e5b071 Replace PLA/ABS preheating with generic 2016-07-09 18:06:51 -07:00
Petr Zahradník junior
315b4c2153 Runout sensor without SD Card 2016-07-09 17:57:53 -07:00
AnHardt
468f7f03a2 homeaxis() can leave early 
when no known axis needs to be homed.

Most changes are only caused from altering the indentation.
```
if (axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0) {
  ...
}

to

if (!(axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0)) return;
...

```
 2016-07-08 15:59:33 +02:00
AnHardt
eff7912243 Ensble/disable hardware endstops in G28 globally. 
For moving away from the endstops we do not have to disable them.
They are not tested anyway.
 2016-07-08 15:49:10 +02:00
AnHardt
f69434d81c Eliminate void setup_for_endstop_move() 2016-07-08 15:23:20 +02:00
AnHardt
0ea6247fc2 Use logic in Z_SAFE_HOMING 
Use logic in Z_SAFE_HOMING

From
```
if (home_all_axis || homeZ) {
  if (home_all_axis) {
  ...
  home z
  }
  else if (homeZ) { // Don't need to Home Z twice
  home z
  }
}

```
to
```
if (home_all_axis || homeZ) {
  if (home_all_axis) {
  ...
  }
  home z
}
```
 2016-07-08 15:08:50 +02:00
AnHardt
de3a169336 Always define MIN_Z_HEIGHT_FOR_HOMING even if 0 
Always define MIN_Z_HEIGHT_FOR_HOMING even if 0
Always make a potential rise to `home_offset[Z_AXIS]` possible in G28.
Get rid of some very ugly constructs in MBL (ultralcd.cpp).
 2016-07-08 15:08:32 +02:00
AnHardt
88ed232f53 Remove HAS_BED_PROBE case in first raise in G28 
Differentiating made sense here when we could save a dozen lines of code,
but not for one line.
 2016-07-08 14:59:44 +02:00
AnHardt
653eff3b31 Clean up quick_home_xy() 
Since we do the actual homing now in the 'normal' routines `quick_home_xy()`
can be simplified to a relative simple diagonal move.
 2016-07-08 14:59:27 +02:00
Scott Lahteine
98d0167a57 Merge pull request #4226 from thinkyhead/rc_emergency_command_parser 
MarlinSerial emergency-command parser (with M108)
 2016-07-07 16:53:55 -07:00
Scott Lahteine
2ee4e4f791 Make wait_for_heatup volatile 2016-07-07 16:37:23 -07:00
Scott Lahteine
834ad14c8d Add quickstop_stepper to update current position with stepper.quick_stop() 2016-07-07 16:37:22 -07:00
Scott Lahteine
ecffe92e20 Group EMERGENCY_PARSER commands 2016-07-07 16:37:22 -07:00
AnHardt
a129078927 Add an emergency-command parser to MarlinSerial (supporting M108) 
Add an emergency-command parser to MarlinSerial's RX interrupt.

The parser tries to find and execute M108,M112,M410 before the commands disappear in the RX-buffer.

To avoid false positives for M117, comments and commands followed by filenames (M23, M28, M30, M32, M33) are filtered.

This enables Marlin to receive and react on the Emergency command at all times - regardless of whether the buffers are full or not. It remains to convince hosts to send the commands. To inform the hosts about the new feature a new entry in the M115-report was made. "`EMERGENCY_CODES:M112,M108,M410;`".

The parser is fast. It only ever needs two switch decisions and one assignment of the new state for every character.

One problem remains. If the host has sent an incomplete line before sending an emergency command the emergency command could be omitted when the parser is in `state_IGNORE`.
In that case the host should send "\ncommand\n"

Also introduces M108 to break the waiting for the heaters in M109, M190 and M303.

Rename `cancel_heatup` to `wait_for_heatup` to better see the purpose.
 2016-07-07 16:37:22 -07:00
Scott Lahteine
9f42b1a075 Merge pull request #4235 from thinkyhead/rc_revert_quickhome_test 
Fix quick homing, tweak MIN_Z_HEIGHT_FOR_HOMING
 2016-07-07 13:37:14 -07:00
Scott Lahteine
ad968f2325 Merge pull request #4234 from thinkyhead/rc_better_position_logging 
Move XYZ in print_xyz and DEBUG_POS to the front
 2016-07-07 12:31:15 -07:00
Scott Lahteine
4036c73cdd Don't raise Z if only homing Z 2016-07-07 12:28:37 -07:00
Scott Lahteine
0b6f8f8244 Apply MIN_Z_HEIGHT_FOR_HOMING raise literally 2016-07-07 12:25:02 -07:00
Scott Lahteine
177ec20bf0 Revert quick-home changes 2016-07-07 12:17:34 -07:00
Scott Lahteine
9c5b462ef2 Move XYZ in print_xyz and DEBUG_POS to the front 2016-07-07 11:42:19 -07:00
Scott Lahteine
4e84c803a3 Merge pull request #4232 from thinkyhead/rc_no_axis_codes_needed 
Don't use axis_codes if a literal will do
 2016-07-06 20:05:16 -07:00
Scott Lahteine
e2f7cb0905 Don't use axis_codes if a literal will do 2016-07-06 18:37:21 -07:00
Scott Lahteine
6559f7359f Fix comment on Z raise for homing, save a few bytes 2016-07-06 16:21:51 -07:00
Scott Lahteine
d0b29cabf3 Don't re-home X and Y if you quick homed 2016-07-06 13:46:06 -07:00
Scott Lahteine
e0a6b978f5 Don't do_probe_raise with MIN_Z_HEIGHT_FOR_HOMING 2016-07-06 13:46:05 -07:00
Scott Lahteine
7735ec5e7a Merge pull request #4223 from thinkyhead/rc_rename_heatup 
Change cancel_heatup to wait_for_heatup
 2016-07-06 11:25:44 -07:00
Scott Lahteine
160a2be117 Change cancel_heatup to wait_for_heatup 2016-07-06 09:17:50 -07:00
AnHardt
16c83d203b Make use of the good features of a sled probe for all probes. 
Move and extend axis_unhomed test to deploy/stow_z_probe().
Move and extend position store/restore to deploy/stow_z_probe().

Now all kinds of probes can use the 'E' parameter in G29/M48.
Allen key probes can be used now for grid and 3-point levelling.

Deploying the Allen Key probe uses big moves in z direction.
Too dangerous for an unhomed z-axis.
Throw a compile time error when we try to configure an
Allen Key probe homing to z-min and having no other z-min-endstop.
 2016-07-06 04:11:04 +02:00
AnHardt
8555816a11 Generalize and simplify 'triggered when stowed test` 
The `PROBE_IS_TRIGGERED_WHEN_STOWED_TEST` is able to detect if a probe is
successfully deployed/stowed.
It was part of the Allen Key probes code only.
Now the function is generally available.

Currently this test is compulsory for Allen Key probes to not alter the used behaviour
If you want to add the test for an other type of probe simply add
```
#define PROBE_IS_TRIGGERED_WHEN_STOWED_TEST
```
to your config.
 2016-07-06 03:56:17 +02:00
AnHardt
5126cce7fd Move Allen Key probe move scripts to their own functions 
There was an hidden extra move after the scripts. This is configurable now.
Added the extra moves to the relevant configs.
 2016-07-06 03:46:40 +02:00
AnHardt
7d063c111c Add a optional feedrate parameter to do_blocking_move() 
Add a optional feedrate parameter to `do_blocking_move()` and its companions.
 2016-07-06 03:46:34 +02:00
Scott Lahteine
b114b6a0b3 Save 152 bytes using uint8_t for command indices 2016-07-05 16:29:28 -07:00
Scott Lahteine
0d4ff0c48b Allow the queue to be cleared from within commands 2016-07-05 16:25:20 -07:00
Scott Lahteine
c450851401 Merge pull request #4209 from AnHardt/too-high-G28 
Make raise for probe deploy relative in homeaxis()
 2016-07-05 11:07:42 -07:00
AnHardt
f799f18388 MBL typo 2016-07-05 18:19:53 +02:00
AnHardt
8b02e68cb6 Make raise for probe deploy relative in homeaxis() 
Make raise for probe deploy relative in homeaxis()
by setting `current_position[axis]` to zero later.
 2016-07-05 10:42:33 +02:00
Scott Lahteine
e48502866b Merge pull request #3611 from alephobjects/M108_cancel_heatup 
Introduce M108 cancel wait for heatup/cooldown of the hotend and bed
 2016-07-04 01:19:31 -07:00
Scott Lahteine
d70197f514 Merge pull request #4204 from thinkyhead/rc_fix_gcode_t_position 
Additional patches for gcode_T position change
 2016-07-04 01:16:22 -07:00
Scott Lahteine
869b517589 Merge pull request #4205 from thinkyhead/rc_fixup_unit_references 
References to millimeters in code comments need an update
 2016-07-04 01:15:34 -07:00
Scott Lahteine
e104b91ea6 References to millimeters in code comments need an update 2016-07-03 20:13:29 -07:00
AnHardt
ff91d28a3a Remove wants_to_cool warning 
Remove wants_to_cool warning
 2016-07-04 03:12:11 +02:00
Scott Lahteine
c9e536cf87 Additional patches for gcode_T position change 2016-07-03 18:11:02 -07:00
Scott Lahteine
f31af61ee2 Fix position adjustment with gcode_T and MBL 2016-07-03 17:44:04 -07:00
lrpirlet
9b42c6b44b apply correction when swtiching from MBL to physical in G28 X 2016-07-03 21:43:42 +02:00
Petr Zahradnik
43ff0ce35f Rewritten FILAMENT_CHANGE_ENABLE feature 2016-07-02 15:34:33 -07:00
AnHardt
cb1b31f69b Unconditional do_probe_raise() in probe_pt() 
If Z_RAISE_BETWEEN_PROBINGS is null or undefined the probe is currently not raised by home_offset[Z_AXIS] and zprobe_zoffset.
But when different from 0 is.

If an undefined Z_RAISE_BETWEEN_PROBINGS expands to 0 (and it does) this is the solution.


A similar asymmetry exists with the newly introduced 'short-cut' in G28 - but its the rise before anything is probed - so should not make a difference.
 2016-07-01 15:28:41 +02:00
Scott Lahteine
7ef7843fd4 Merge pull request #4181 from thinkyhead/rc_rename_a_move_func 
Do interpolated moves for Allen Key deploy/stow
 2016-06-30 16:30:09 -07:00
Scott Lahteine
da6b0dab5f Use prepare_move_to_destination for Allen Key deploy/stow 2016-06-30 16:09:43 -07:00
Scott Lahteine
c42f8fb8dd Rename some movement sub-functions 2016-06-30 15:50:00 -07:00
Scott Lahteine
5e14a528dd Always wait for cooling in M109/M190, break at low temp or if cooling stalls 2016-06-29 14:07:54 -07:00
Scott Lahteine
2e96276bf4 More debug message cleanup 2016-06-27 20:36:19 -07:00
Scott Lahteine
dc2c0e5e24 Simpler debug output for deploy/stow 2016-06-27 20:36:18 -07:00
Scott Lahteine
bd491818d6 Reduce storage requirements for strings, make some PGM 2016-06-27 20:36:18 -07:00
AnHardt
e480ee0054 Further cleanup of G28 for probes 2016-06-27 20:19:51 -07:00
AnHardt
39883d03fc universalize axis_unhomed_error() 2016-06-27 20:19:51 -07:00
AnHardt
e616093d4c Simplify dock_sled() 
`dock_sled()` is never called with offset parameter - remove it.
We move x only - so only that needs to be homed. Consequence is - we can home to z-min now with a sled probe!
Feedrates are set and restored in `do_blocking_move()`.
We already checked if the probe is deployed/stowed in deploy/stow_probe.
```
if (z_loc < _Z_RAISE_PROBE_DEPLOY_STOW + 5) z_loc = _Z_RAISE_PROBE_DEPLOY_STOW;
```
makes no sense - remove.
Now the raise is the same for deploy/stow -> move before the if.
Replace the if with a ternary.
Instead writing LOW/HIGH use the boolean `stow` we already have.

There is no reason for not using the sled probe in G29/M48 with 'E'.
It takes a while but works. (tested!)
 2016-06-27 20:19:51 -07:00
Scott Lahteine
829c92f1ba Use Z_RAISE_BETWEEN_PROBINGS with MBL 2016-06-26 15:39:11 -07:00
Scott Lahteine
eb1755208f Merge pull request #4153 from thinkyhead/rc_probe_raise_options 
Combine Z raise before/after options
 2016-06-26 15:30:08 -07:00
Scott Lahteine
10da7ac86c Combine Z raise before/after options 2016-06-26 13:56:30 -07:00
Scott Lahteine
3fa631130f Ensure a minimum height before XY move in probe_pt 2016-06-25 19:19:31 -07:00
Scott Lahteine
ca184d3d72 Merge pull request #4147 from thinkyhead/rc_fix_M48_raise 
Fix debug output in probe_pt
 2016-06-25 18:15:33 -07:00
Scott Lahteine
b4161cbd98 Fix debug output in probe_pt 2016-06-25 17:59:03 -07:00
Edward Patel
da88b00585 MBL: Add support for max z endstop 
See https://github.com/MarlinFirmware/Marlin/issues/4088
 2016-06-25 21:58:02 +02:00
Scott Lahteine
7de7552069 Merge pull request #4133 from MagoKimbra/Single_home_axis_delta 
Single home Axis Delta need simple sync_plan_position
 2016-06-23 21:14:22 -07:00
Scott Lahteine
15a6b49f37 Simplified probe_pt (in G30) 2016-06-23 20:25:46 -07:00
Scott Lahteine
6a7045b9bf Remove clean_up_after_endstop_move 2016-06-23 20:23:19 -07:00
Scott Lahteine
2a4f866561 Simplified probe_pt (in G29) 2016-06-23 20:22:28 -07:00
Scott Lahteine
89a2aa026b Simplified probe_pt (in M48) 2016-06-23 19:22:45 -07:00
Scott Lahteine
f8530c5d1f Simplified probe_pt function (G28 grid) 2016-06-23 19:09:32 -07:00
Scott Lahteine
c376c08042 Simplified probe_pt function (part 1) 2016-06-23 19:00:29 -07:00
Scott Lahteine
9a71b7f8ad Fix debug message for 3-point leveling 2016-06-23 18:17:31 -07:00
Scott Lahteine
550c03a5a9 Drop raise_z_after_probing function 2016-06-23 18:11:54 -07:00
Scott Lahteine
bb38c816af Always raise in deploy_z_probe / stow_z_probe 2016-06-23 18:00:20 -07:00
Scott Lahteine
68f3350050 Cleanup M401 / M402 2016-06-23 17:04:41 -07:00
Scott Lahteine
3afda99adf Regular handlers for G31 / G32 2016-06-23 17:04:13 -07:00
Scott Lahteine
6803c8e37e Move Z up before, or down after XY, for "blocking move" 2016-06-23 15:50:13 -07:00
MagoKimbra
570f3bbc07 Single home Axis Delta need simple sync_plan_position 2016-06-23 23:09:47 +02:00
Scott Lahteine
7b2fadd598 Apply some fixes from Andreas 
Derived from
https://github.com/AnHardt/Marlin/commit/6e8ede8c694fa4d9e3c769840b09d56
7f8d8e0dd
 2016-06-22 17:35:59 -07:00
Scott Lahteine
bd01592816 Goodbye MECHANICAL_PROBE 2016-06-22 17:13:33 -07:00
Scott Lahteine
2640d13a9f Simplify initial raise in M48 2016-06-22 16:53:04 -07:00
Scott Lahteine
3763d45656 Return Z position in run_z_probe 2016-06-22 16:52:32 -07:00
Scott Lahteine
1f48b5c30f Pass a raise to probe_pt, not a Z position 2016-06-22 16:40:21 -07:00
Scott Lahteine
6fdd5ba246 Save and restore feedrate in more places 2016-06-22 16:40:20 -07:00
Scott Lahteine
fe173c2bc6 Generalized probe raise, use for after probing 2016-06-22 14:44:30 -07:00
Scott Lahteine
7da3080761 Simpler cleanup in G28 / G29 2016-06-22 14:44:30 -07:00
Scott Lahteine
15229d988b Fix compile error for bed matrix in M48 2016-06-22 14:04:46 -07:00
Scott Lahteine
c01352cbd5 Add a dependency for z servo macros 2016-06-22 14:04:23 -07:00
Scott Lahteine
c3794bd695 Add HAS_PROBING_PROCEDURE conditional 2016-06-22 14:03:22 -07:00
Scott Lahteine
bb9c67b4b5 Tweak some feedrate vars 2016-06-22 03:27:31 -07:00
Scott Lahteine
5158bd6e93 Screen out G29 E for sled and allen key, allow single probe 2016-06-22 03:20:33 -07:00
Scott Lahteine
ccae92588d Cleanup debug in G28 and G29 2016-06-22 03:20:33 -07:00
Scott Lahteine
b4a9d2366c Use a macro for kinematic sync_plan_position 2016-06-22 03:20:33 -07:00
Scott Lahteine
bfccf26294 Use sync_plan_position_delta where needed 2016-06-22 03:20:33 -07:00
Scott Lahteine
a6b8c67df4 Move probe deploy after setup call in G29 2016-06-22 03:20:33 -07:00
Scott Lahteine
e69916d1bd Split up endstop_move functions 2016-06-22 03:20:33 -07:00
Scott Lahteine
0e18a4897b Simpler handling of sled/allen-key in probe_pt 2016-06-22 03:20:33 -07:00
Scott Lahteine
1a92e2ef18 Comment on run_z_probe 2016-06-22 03:20:33 -07:00
Scott Lahteine
68e0e5855e For all probes, at the end of G29 simply raise and stow 2016-06-22 03:20:33 -07:00
Scott Lahteine
c3023f8cc5 Make M401/M402 available with HAS_BED_PROBE 2016-06-22 03:20:33 -07:00
Scott Lahteine
9f0c255c69 Show uncorrected position in set_bed_level_equation_3pts 2016-06-22 03:20:33 -07:00
Scott Lahteine
07298ac992 Initialize current_position to home_offset on boot 2016-06-22 03:20:33 -07:00
Scott Lahteine
d50539583a Make XY_PROBE_SPEED a general probe option 2016-06-22 03:04:47 -07:00
Scott Lahteine
2798499b71 XY_TRAVEL_SPEED => XY_PROBE_SPEED 2016-06-22 02:45:25 -07:00
Scott Lahteine
88dc543584 Add a macro for XY_TRAVEL_FEEDRATE 2016-06-22 02:23:50 -07:00
Scott Lahteine
3996242e9d Allow Z_MIN_PROBE_REPEATABILITY_TEST solo 2016-06-21 01:56:40 -07:00
Scott Lahteine
26a9cd0b08 Move run_z_probe to earlier block 2016-06-21 01:25:23 -07:00
Scott Lahteine
7f8a2025af Move raise_z_after_probing into earlier block 2016-06-21 01:03:40 -07:00
Scott Lahteine
2530371516 Always disable probe at the end of G29 2016-06-20 16:40:44 -07:00
Scott Lahteine
6aba98e470 Comment on setup_for_endstop_move 2016-06-20 16:40:44 -07:00
Scott Lahteine
04e88d008e Clear up ordering in G30 2016-06-20 16:40:44 -07:00
Scott Lahteine
ed75b0ea11 Make clean_up function available for probes 2016-06-20 16:28:45 -07:00
Scott Lahteine
51d52cb52a Make run_z_probe available for any bed probe 2016-06-20 16:02:36 -07:00