MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
11,374 Commits 1 Branch 0 Tags 129 MiB
a0c795b097
Commit Graph

586 Commits

Author SHA1 Message Date
Scott Lahteine
a90cbc6339
[2.0.x] Wait for bed heaters between probing (#10472) 2018-04-21 15:43:21 -05:00
Scott Lahteine
d8a8eec6ea Add THERMAL_PROTECTION capability 
Based on #10465

In response to `M115` the firmware reports if Thermal Protection is enabled (1) or not (0). This information can be used by software such as OctoPrint (more precisely the Printer Safety Check plugin) to warn users when Thermal Protection is not enabled in the firmware.

Co-Authored-By: andrivet <sebastien@advtools.com>
 2018-04-20 16:50:50 -05:00
Scott Lahteine
65a6a86d19 Don't report point 0 in MBL G29 2018-04-20 13:12:50 -05:00
Marcio Teixeira
5cc7916e69 Add G29_RETRY_AND_RECOVER feature 
- Add an option to retry G29, optionally executing a G-code procedure after each failed probe.
 2018-04-19 19:45:53 -05:00
Scott Lahteine
78ea4871f9 Fix up enqueue now functions 
…and apply to MALYAN_LCD.
 2018-04-19 19:45:53 -05:00
Scott Lahteine
df2f24617b Use 0 as the bed position (not Z_MIN_POS) 2018-04-17 20:32:56 -05:00
Scott Lahteine
52c024e260 M221 with no parameters report flow 2018-04-17 16:06:25 -05:00
Scott Lahteine
0746aff595 Improve UBL mesh report. Add M420 T, M421 N 2018-04-17 15:52:56 -05:00
Scott Lahteine
99282a46e9 Make sure ABL (manual) starts close to the bed 2018-04-13 20:19:30 -05:00
Scott Lahteine
3c5c6d478a Prettify process_parsed_command 2018-04-13 00:23:11 -05:00
Scott Lahteine
bb7064cc30 Tweak MBL move to bed code 2018-04-12 22:43:02 -05:00
Scott Lahteine
daa712455b Make sure MBL starts close to the bed 
Fix #10390
 2018-04-12 19:36:37 -05:00
Scott Lahteine
4c8751727a Fix M118 parameter handling 
Fix #10388
 2018-04-12 19:10:04 -05:00
Luc Van Daele
646aa20b43 Overhaul of G33 Delta Calibration (#8822) 2018-04-11 21:14:48 -05:00
Luc Van Daele
ac2e0afb62 Low Point for delta calibration (#10363) 2018-04-11 18:59:46 -05:00
Sean
2d9b0a66fe Add Filament Change accelerations 2018-04-09 23:57:27 -05:00
Scott Lahteine
8b8ad14178 Add Z_PROBE_LOW_POINT to prevent damage 2018-04-09 17:23:03 -05:00
Scott Lahteine
cea398849e Tweak to gcode_line_error/return 2018-04-07 21:25:49 -05:00
Scott Lahteine
e8e60263c8 Scale feedrate (mm/s to deg/s) for SCARA 2018-04-06 19:47:48 -05:00
Marcio Teixeira
8bc93c6f2b Improve heating/cooling LCD messages (#10293) 2018-04-04 18:29:27 -05:00
Scott Lahteine
241996d5d6
Merge pull request #10257 from thinkyhead/bf2_tool_change_debug 2018-04-02 19:33:45 -05:00
Scott Lahteine
adcb87f0db Z Endstop Servo => Z Probe Servo 2018-04-01 23:54:21 -05:00
Scott Lahteine
1a75165f35 For set_z_fade_height use set_bed_leveling_enabled 2018-03-31 22:43:05 -05:00
Scott Lahteine
55e9b85ad6 Clear the "Wait for user" message set by M0/M1 
See https://github.com/MarlinFirmware/Marlin/issues/10246#issuecomment-377146936
 2018-03-29 18:38:12 -05:00
AnHardt
c1f58a238d No delay in sensorless quick homing (#10254) 2018-03-29 16:10:20 -05:00
Scott Lahteine
1be955e52a Alert users about low Z jerk values 2018-03-28 23:08:33 -05:00
Scott Lahteine
9e4c037cef
Wait before turning off PRINTER_EVENT_LEDS at print end (#10248) 2018-03-28 22:59:28 -05:00
Scott Lahteine
7b8bb2519e Fix gcode_line_error call 
Followup to 3007eee
 2018-03-28 20:29:41 -05:00
Scott Lahteine
aa20b3ef7c Fix linear/3-point manual leveling buffer overrun 
Fixes #10137
 2018-03-28 18:41:22 -05:00
Scott Lahteine
38378cd0e8 M218 with DELTA needs planner.h 
Fix #10232
 2018-03-28 17:05:14 -05:00
Scott Lahteine
3007eee22e Require a checksum when writing to SD 
From #10204 by @adriancuzman
 2018-03-28 17:05:13 -05:00
Bob-the-Kuhn
9656a82609 Fix G53/CNC_COORDINATE_SYSTEMS compilation, Travis testing (#10227) 2018-03-28 14:14:39 -04:00
Rob Power
d1f14202a9 [2.0.x] NANODLP_Z_SYNC requires linear axes (#10240) 2018-03-28 14:03:34 -04:00
Scott Lahteine
1cb810ff1c
[2.0.x] Automatically reset stepper timeout (#10179) 
* Automatically reset stepper timeout in manage_inactivity

Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.

* blocks_queued => has_blocks_queued
 2018-03-21 19:30:06 -05:00
Scott Lahteine
045ee28c50 Tweaks to M915 2018-03-21 05:15:25 -05:00
Scott Lahteine
ff304d3767 Allow G53 to go back to native space 2018-03-21 01:38:25 -05:00
Scott Lahteine
bc45fb6b13 Tweak use of move_z_after_probing 2018-03-21 01:25:08 -05:00
Scott Lahteine
c352954882 Allow no raise after run_z_probe in probe_pt 2018-03-21 01:24:51 -05:00
Scott Lahteine
ae39fbd646 Also suppress keepalive with suspend_auto_report 2018-03-21 00:29:09 -05:00
Scott Lahteine
a46bac3100 Add 'I' parameter to M906/M913/M914; 'T' to M906/M913 2018-03-19 22:05:16 -05:00
Scott Lahteine
cfc13ed7f3 Quiet M906/M913/M914 with axes. Patch for DISTINCT_E_FACTORS. 2018-03-19 22:05:16 -05:00
Scott Lahteine
48d7036874 Consolidate smart stepper driver initialization 2018-03-19 22:05:16 -05:00
Scott Lahteine
dd2949922b Consolidate 3-point leveling point options 2018-03-19 04:12:20 -05:00
Scott Lahteine
8922b56b58 Fix some spelingz 2018-03-16 01:25:41 -05:00
Scott Lahteine
a6feb58837
Delta support for multiple hotends with offsets (#10118) 2018-03-16 00:46:42 -05:00
TheSFReader
2e43438e0c Add C parameter to M27 to include the long filename 
In answer to #10001

Add an option to retrieve the currently open file name (long filename if possible).
 2018-03-15 23:06:18 -05:00
Scott Lahteine
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069) 
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
 2018-03-13 01:15:22 -05:00
Scott Lahteine
5b45aab262 M218: report with no parameters 2018-03-12 08:14:35 -05:00
Scott Lahteine
28f1276286
[2.0.x] Add Z_AFTER_PROBING option (#10058) 
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
 2018-03-11 13:07:55 -05:00
Scott Lahteine
bae1cb859c Patch flush_and_request_resend for 1.1.x parity 2018-03-11 07:36:00 -05:00
Bob-the-Kuhn
0d8c15c01f restore PR 9661 files & V1 fix 2018-03-10 22:46:32 -06:00
Scott Lahteine
751785fc97 Followup to recent patches 
- `M666` is static, not inline
- Disambiguate some stepper macros
 2018-03-10 21:41:17 -06:00
Scott Lahteine
f003173752 Fixup M666 
Followup to d6df032
 2018-03-10 19:52:30 -06:00
Bob-the-Kuhn
bf59a4a6df
Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h" 2018-03-10 17:22:20 -06:00
Sebastianv650
fd1d590726 [2.0.x] Silence M204 (#10037) 
`M204` is often used by slicers to set acceleration depending on perimeter, infill, etc., so Marlin's answers are flooding the serial windows. Silence `M204` according to the philosophy that setter commands should only send a reply if no parameter is given.
 2018-03-10 07:16:55 -06:00
Scott Lahteine
d6df0322c2 Update M666 for XYZ dual endstops 2018-03-10 06:57:31 -06:00
Scott Lahteine
fbc41c0e98 Update Marlin G-code summary 2018-03-10 06:57:31 -06:00
Scott Lahteine
ddce486360
Merge pull request #10032 from thinkyhead/bf2_unknown_z_no_raise 
[2.0.x] Add UNKNOWN_Z_NO_RAISE to prevent Z grinding
 2018-03-10 00:57:30 -06:00
Scott Lahteine
419d12ca1b Add UNKNOWN_Z_NO_RAISE option 
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
 2018-03-10 00:17:34 -06:00
Bob-the-Kuhn
914bb80bde removed SDSS init 
added device & comm drivers for shared SPI LCDs

mistyped some updates in ultralcd_impl_DOGM.h

remove unwanted changes in onfiguration.h

still can't type

Update HAL_LCD_class_defines.h

include USB mass storage & misc
 2018-03-09 23:06:11 -06:00
Scott Lahteine
49ca67202f Patch configuration_store for extra serial port 
Fix #9948
 2018-03-09 07:42:27 -06:00
Scott Lahteine
3c2bfa5e53
Update powersupply_on in power_on/off (#10015) 
Fix #10004
 2018-03-08 18:56:47 -06:00
Scott Lahteine
42608b1925 Init old_red to 127 to ensure initial change 
Fix #10012
 2018-03-08 18:28:33 -06:00
Scott Lahteine
ffbf63e6af Add HAS_TEMP_SENSOR conditional 2018-03-07 01:53:50 -06:00
Scott Lahteine
920d92aa46
Merge pull request #9974 from thinkyhead/bf2_tmc_util_progmem 
[2.0.x] Move tmc_util.* extended_axis_codes to PROGMEM
 2018-03-07 00:16:50 -06:00
Scott Lahteine
b198b49d15 Followup to AUTO_REPORT_SD_STATUS 
Followup to #9832
 2018-03-07 00:13:42 -06:00
Scott Lahteine
2057177184 Make enums into implicit char 2018-03-06 23:39:56 -06:00
Scott Lahteine
e28e3bb532 Move extended_axis_codes to PROGMEM 2018-03-06 22:21:24 -06:00
Scott Lahteine
bf9fc8ac0e M851 - report only without parameters 2018-03-05 02:11:50 -06:00
Scott Lahteine
61620cbd15 Tweak M211 2018-03-02 02:20:40 -06:00
Scott Lahteine
6e08ddce6e Correct M401 / M402 description 2018-03-01 19:10:36 -06:00
Scott Lahteine
88b6a15b47 Update M900 verbiage 2018-03-01 15:11:31 -06:00
Scott Lahteine
91db7930dc Drop SCARA_FEEDRATE_SCALING 
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
 2018-03-01 04:30:41 -06:00
Scott Lahteine
118899357d
Add sanity checks to Linear Advance 1.5 (#9873) 2018-03-01 02:10:43 -06:00
Scott Lahteine
a446433c87
Fix SENSORLESS_HOMING for Core Kinematics (#9868) 2018-03-01 01:37:31 -06:00
TheSFReader
eb079959fb Report sd card progress [FR] #9751 (#9832) 
* SD Status auto-report feature
Feature Request #9751
 2018-02-26 15:38:27 -06:00
Scott Lahteine
3f89bbeab5 Drop a conditional only used once 2018-02-24 16:35:31 -06:00
Scott Lahteine
b2cf253a13 Add RESTORE_LEVELING_AFTER_G28 option 2018-02-23 13:38:54 -06:00
Scott Lahteine
65519263f4 Fix broken LEVEL_BED_CORNERS 
Fix #8805
 2018-02-23 09:13:34 -06:00
Scott Lahteine
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 (#9712) 2018-02-23 00:53:29 -06:00
Scott Lahteine
1d7f5be0ff quick_home_xy sensorless homing 2018-02-20 20:52:48 -06:00
Scott Lahteine
d4e4fe40e0 Add SENSORLESS_HOMING delay to quick_home_xy 
Fix #9471
 2018-02-19 10:12:16 -06:00
Scott Lahteine
3af988a7f3 Add sensorless homing delay to home_z_safely 
Based on #9705
 2018-02-18 19:28:40 -06:00
Scott Lahteine
8ffa0b24a4 Strip excess G28 debug logging 2018-02-18 01:11:41 -06:00
Kevin
9019ea0fce Option to force X or Y to home first when homing the other axis 2018-02-18 01:11:41 -06:00
Scott Lahteine
241e55ef3b Apply SERIAL_FLUSH macro 2018-02-16 17:32:12 -06:00
Scott Lahteine
6a70a4fbb3
Fix G26 circles (#9627) 
Easier to configure. Catch an odd divisor.
 2018-02-15 22:11:26 -06:00
Roxy-3D
c78e1c0f23
Fix G26 Circles... (#9641) 
* Fix G26 Circles...
 2018-02-15 11:15:15 -06:00
AnHardt
133b38b93b Complete M48 description (#9631) 2018-02-14 05:17:58 -06:00
Scott Lahteine
8d71ad37cb flush comment to match 1.1.x 2018-02-14 02:56:18 -06:00
Scott Lahteine
377108619b Fix plan_arc clockwise (G2) 
Fix #9482
 2018-02-11 03:34:25 -06:00
Scott Lahteine
e3043d7ac7 Fix #8744 2018-02-10 16:54:42 -06:00
Scott Lahteine
da693a636e Fix handling of escapes in serial input 2018-02-09 05:19:33 -06:00
Scott Lahteine
c30a8067ab Prevent watchdog reset due to many comments 
Addressing #7449
 2018-02-09 05:19:33 -06:00
Scott Lahteine
b7053156fe Minor comment/condition cleanup 2018-02-09 01:53:35 -06:00
Thomas Moore
1541224a81 Enable Z axis and delta sensorless homing (#9516) 2018-02-08 04:20:44 -06:00
Scott Lahteine
09c8807a36 Minor formatting in queue.cpp 2018-02-08 01:31:19 -06:00
Scott Lahteine
ca8fdff1af Comment G26 properly 2018-02-06 00:58:28 -06:00
Scott Lahteine
b5e92f4f90
[2.0.x] Enable / disable PSU automatically (#9503) 2018-02-06 00:22:30 -06:00
Scott Lahteine
a8c4174a13 M100 comment 2018-02-05 21:54:50 -06:00
GMagician
338dac258b [2.0.x] Fix compiler error when G26 is enabled (#9492) 2018-02-05 14:27:39 -06:00
Scott Lahteine
4ddb6a3a1f
Merge pull request #9470 from thinkyhead/bf2_malyan_clueless 
[2.0.x] Malyan M200 LCD
 2018-02-05 05:03:18 -06:00
Scott Lahteine
03bfc0d7c8
Merge pull request #9439 from thinkyhead/bf2_fix_G26_circle_bumps 
[2.0.x] Change G26 circle angles
 2018-02-04 19:05:18 -06:00
Scott Lahteine
e5ee0b6f6c Implement MALYAN_LCD 2018-02-04 18:52:44 -06:00
Scott Lahteine
2ea4e74ed3 Misc. comments 2018-02-04 17:40:39 -06:00
GMagician
6ace57e1b0 [2.0.x] remove duplicated include (#9445) 
This was present in #9357 but lost
 2018-02-03 19:32:05 -06:00
Scott Lahteine
e6cdc438fd Change G26 circle angles 
To prevent the nozzle from colliding with the printed pattern.
 2018-02-03 19:17:49 -06:00
Scott Lahteine
a8764ac5d5 G26 parity with 1.1.x 2018-02-02 05:19:14 -06:00
GMagician
e1117a8492 [2.0.x] fix compile errors when CNC_COORDINATE_SYSTEMS is enabled (#9380) 2018-02-02 01:45:46 -06:00
Bob-the-Kuhn
21179f8300 Fix the "slow" version of the G-code parser 2018-02-02 00:35:58 -06:00
Scott Lahteine
34160806c0 Fix broken G29 W I J 2018-02-01 21:37:35 -06:00
Scott Lahteine
f5cfdf6efe Use _BV32 to avoid name conflict 2018-02-01 21:37:35 -06:00
Scott Lahteine
fc5c1a28d8 Fix M118 parameter parsing 2018-01-24 00:30:13 -06:00
Scott Lahteine
399bca316a Fix has_value with FASTER_GCODE_PARSER 2018-01-24 00:30:13 -06:00
Scott Lahteine
80d3ded895 Change parser codebits from array to int32_t 2018-01-24 00:30:13 -06:00
Scott Lahteine
053b1371c7 Simplify G-code debug option 2018-01-24 00:06:07 -06:00
Scott Lahteine
608f8b10da Parser val method parity with 1.1.x 2018-01-24 00:06:07 -06:00
Scott Lahteine
2bea1bda56 Move more strings to PROGMEM 2018-01-24 00:06:06 -06:00
Scott Lahteine
1dcfe193ac Optimize some serial strings 2018-01-23 19:14:00 -06:00
Scott Lahteine
9644fe1839 Lightly optimize arc length calculation 2018-01-23 19:13:59 -06:00
Scott Lahteine
c9bda932fe
Patch M114 D logical output 2018-01-23 18:50:37 -06:00
Scott Lahteine
e5ca60acf5 Patch G29 no_action for A and Q 2018-01-23 14:00:06 -06:00
Thomas Moore
3db35ba9be [2.0.x] Fix change filament for delta machines (#9295) 2018-01-22 10:21:42 -06:00
Scott Lahteine
b1cd012aa6 Clean up and document load/unload/pause/resume 2018-01-22 05:45:46 -06:00
GMagician
9b519864bf [2.0.x] Relative movements fix (#9259) 2018-01-20 15:22:03 -06:00
Roxy-3D
bfd9728cf4
Serial buffer over run work around for v2.0.0 (#9236) 
* Work around for serial buffer over run

PronterFace sends a lot of M105 commands.  During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer.   This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.

Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
 2018-01-18 19:57:18 -06:00
Roxy-3D
f5f1b069ad
Convert UBL mesh tilting to all use the same algorithm (#9204) 
A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also.

The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.
 2018-01-16 11:08:00 -06:00
Scott Lahteine
d178d6e921 M503 patch for EEPROM_CHITCHAT off 
Fix #9155
 2018-01-15 06:09:25 -06:00
Scott Lahteine
2c18faf3e4 General cleanups for HAL 2018-01-15 02:46:37 -06:00
Scott Lahteine
6a043eee55 Various updates for TMC support 2018-01-10 23:04:48 -06:00
Thomas Moore
f7efac57b7 Multi-host support 2018-01-10 00:14:47 -06:00
Scott Lahteine
a94104dbb5
Merge pull request #9113 from teemuatlut/TMC_followup 
[2.0.x]TMC followup
 2018-01-09 18:46:35 -06:00
Dave Johnson
554e577676 SERIAL_STATS_* features not supported on USBCON targets (#9127) 2018-01-09 18:42:55 -06:00
teemuatlut
9d923c6c03 Fix TMC gcode commands 2018-01-08 18:45:05 +02:00
Scott Lahteine
60d07f20e7 Make mbl.has_mesh() a method 2018-01-07 00:13:36 -06:00
Scott Lahteine
86818c9a89 Move MBL functions into the class 2018-01-07 00:13:36 -06:00
Unknown
bbb8d4c802 Set has_mesh if user issues G9 S3 
Prevents user from having to manually run through entire manual leveling process only to enable mesh so they can manually restore their offline mesh backup
 2018-01-06 21:07:07 -08:00
Scott Lahteine
cf2922f164 Laser/spindle PWM off on M5 2018-01-06 15:29:22 -06:00
Scott Lahteine
b91ca168fb Add a struct defining EEPROM storage 2018-01-05 15:48:34 -06:00
Scott Lahteine
51e0f2bee3 Add MarlinSettings::validate() 2018-01-05 14:35:24 -06:00
Scott Lahteine
1c41de16d4 Trailing whitespace clean 2018-01-05 10:11:31 -06:00
Scott Lahteine
1746a7352e
Merge pull request #9042 from thinkyhead/bf2_M701_M702 
[2.0.x] Improved Pause/Load/Unload, M701-M702
 2018-01-04 19:41:58 -06:00
Roxy-3D
a5dfe08a81
Add precision to planner.xy_skew_factor so it doesn't print as 0.00 2018-01-04 16:14:09 -06:00
Scott Lahteine
4fb60e1562 M702.cpp => M701_M702.cpp 2018-01-04 15:07:37 -06:00
Scott Lahteine
7541316bb4 Add M701/M702 Filament Load/Unload, M603 2018-01-04 15:07:37 -06:00
Scott Lahteine
4af3d436b2 M303 pid autotune cleanup, commentary 2018-01-03 21:30:45 -06:00
Scott Lahteine
fc67c64b8f
Merge pull request #8989 from tcm0116/2.0.x_ubl 
[2.0.x] Fix UBL compilation warnings
 2018-01-02 21:38:45 -06:00
Thomas Moore
8afc4f8d9d Fix UBL compilation warnings 2018-01-02 21:00:06 -06:00
Bob-the-Kuhn
adb9ecf3cc copy of PR #8990 2018-01-01 16:11:56 -06:00
Scott Lahteine
3dd04736c0
Update M17_M18_M84.cpp 2017-12-31 00:26:45 -06:00
Scott Lahteine
6d94bbf618 Apply some PGM_P pointers 2017-12-30 04:03:17 -06:00
Scott Lahteine
427df8792d Fix Capabilities Report 2017-12-28 21:08:59 -06:00
Scott Lahteine
db32c185ae
Merge pull request #8860 from Bob-the-Kuhn/2.0.x-DUE-RRDFGSC 
[2.0.x] DUE - update for Reprap Discount Full Graphic Smart Controller
 2017-12-27 05:06:49 -06:00
Scott Lahteine
9ecdd1f4c7 Multi extruder support for M600 and LCD 2017-12-27 04:33:25 -06:00
Scott Lahteine
1a827d5b68 Opening brace tweaks 2017-12-25 09:34:43 -06:00
Scott Lahteine
4ef965cc40 Fix compiler warnings 2017-12-25 08:53:01 -06:00
Scott Lahteine
9e8008c49c Fixes for G29, esp. 3POINT 2017-12-25 08:37:27 -06:00
Scott Lahteine
026e301307 lcd_map_control deps on ULTIPANEL 2017-12-25 07:46:25 -06:00
Scott Lahteine
f2731c9f93 Allow consecutive uses of G29 2017-12-25 06:32:33 -06:00
Scott Lahteine
4b49ea1e92 General cleanup of config-store, reset_bed_level 2017-12-25 05:16:01 -06:00
Scott Lahteine
c6354fa153 Tweak M125 code 2017-12-25 01:39:55 -06:00
Thomas Moore
f0a8a1a853 [2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) 
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
 2017-12-25 01:38:06 -06:00
Scott Lahteine
c694608450 Apply SCARA_FEEDRATE_SCALING to G2/G3 2017-12-21 22:33:27 -06:00
Scott Lahteine
913d9e9a59 Matching sign across filwidth vars 2017-12-20 00:17:19 -06:00
Scott Lahteine
93a6a4e1a8 Add VOLUMETRIC capability item 2017-12-19 20:11:23 -06:00
Scott Lahteine
933f76fda3 Option to disable all volumetric extrusion 2017-12-19 19:51:25 -06:00
robpower
5595098063 V2 Extended NanoDLP_Z_Move_Sync to G4 & G28,Added all axis option. 2017-12-15 16:22:55 -06:00
teemuatlut
0cd1e91056 [2.0.x] TMC driver update (#8769) 2017-12-15 15:03:14 -06:00
Scott Lahteine
cf2193c07f Comment, fix filament width sensor 2017-12-13 02:32:34 -06:00
Scott Lahteine
a71d2f3f40 UBL_DELTA => UBL_SEGMENTED 2017-12-11 00:27:06 -06:00
Scott Lahteine
73e32925e4 References are better for array args 2017-12-11 00:27:06 -06:00
Scott Lahteine
125c572d97 Tweak M114 detail 2017-12-11 00:27:06 -06:00
Scott Lahteine
204199e1ce Only compare XYZ to check motion 2017-12-10 23:00:00 -06:00
Scott Lahteine
117fc872a7 Update current position in M852 2017-12-10 21:39:49 -06:00
Scott Lahteine
7d2e850577 Have M420 report a changed position 2017-12-10 21:39:49 -06:00
Scott Lahteine
03ba79f144 Sync and report changed position 2017-12-10 21:39:49 -06:00
Scott Lahteine
de3d3b9cb1 Put FORCE_INLINE before static 2017-12-08 00:46:22 -06:00
Scott Lahteine
ae663a4198 PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING 2017-12-07 16:44:13 -06:00
GMagician
99fcf60977 [2.x] addressing #8644 
Removed missing include file
 2017-12-06 23:49:30 -06:00
Scott Lahteine
90cf6a06be Simplify G26 user_canceled 2017-12-06 22:02:54 -06:00
Scott Lahteine
c846388a65 Standardize LCD interface code for UBL a little 2017-12-06 21:50:54 -06:00
Scott Lahteine
2fde60da12 Changes for parity with 1.1.x 2017-12-06 21:50:54 -06:00
Scott Lahteine
a4e1d83599 Fix M503 S parameter 2017-12-06 21:23:37 -06:00
revilor
9e3fbcf35c fix for #8669 (#8679) 
* fix for #8669

* Update G28.cpp
 2017-12-05 19:40:36 -06:00
Scott Lahteine
6e944a413c
Merge pull request #8607 from benlye/patch-1 
[2.0.x] Fix M49 so that it does not hang the terminal console
 2017-12-03 03:41:33 -06:00
Scott Lahteine
f4b16a3bac
Update M49.cpp 2017-12-03 03:34:56 -06:00
Unknown
4c5ffd2349 [2.0.x] Report SERIAL_XON_XOFF in M115 
-Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts
-Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines
-Update error message conditions
 2017-12-02 21:08:06 -08:00
Scott Lahteine
046a1ad331
Merge pull request #8625 from tcm0116/2.0.x-G33 
[2.0.x] Fix missing return values in G33_auto_tune
 2017-12-02 00:51:19 -06:00
Thomas Moore
b35c3b5eb8 Fix missing return values in G33_auto_tune 2017-12-01 21:29:16 -06:00
Scott Lahteine
0154e3480c New feature: BED_SKEW_CORRECTION 2017-12-01 19:39:49 -06:00
Ben Lye
1f3ad461bc
Update M49.cpp 
Fix M49 so that it does not hang the terminal console.
 2017-11-30 20:17:44 +00:00
Scott Lahteine
e37dd64548 Apply LEDColor, language fixes 2017-11-29 23:58:12 -06:00
Scott Lahteine
4793c34c53 Fix M290 boolval bug 
Fix #8577
 2017-11-28 17:21:33 -06:00
Scott Lahteine
0880031e8e Satisfy M702 dependencies 2017-11-27 13:39:59 -06:00
Scott Lahteine
0786b61ce7 Followup to #8575 2017-11-27 12:58:40 -06:00
Scott Lahteine
276271e72f Make MBL work more like PROBE_MANUALLY 2017-11-27 02:12:29 -06:00
Scott Lahteine
22b897e77d Show M211 output with workspace offset 2017-11-25 20:48:20 -06:00
Roxy-3D
e48fcad615 change G26 and G29 bit function names to avoid HAL collision 2017-11-25 19:58:45 -06:00
Scott Lahteine
41ec449960 Fix G26 error return 2017-11-25 19:53:14 -06:00
Scott Lahteine
d18d40e1d6 M290 report on change, P0 to leave Probe Z Offset alone 2017-11-25 16:47:39 -06:00
LVD-AC
65f365333f [2.0.x] G33 probe error handling 2017-11-25 16:19:10 -06:00
Scott Lahteine
be00e421a7 Patch up M290, M851 2017-11-25 14:11:57 -06:00
Scott Lahteine
b49acce035 Tweaks for lcd_external_control 2017-11-24 15:53:25 -06:00
Scott Lahteine
ab03a31cc9 Patch G0/G1 for NANODLP_Z_SYNC 2017-11-24 14:11:12 -06:00
Scott Lahteine
a766dfb3b1
Merge pull request #8536 from thinkyhead/bf2_nanodlp_z_move_sync 
[2.0.x] Implement NANODLP_Z_SYNC for 2.0.x
 2017-11-24 13:11:14 -06:00
Roxy-3D
ec04cf27d3
Fix the G26 out of scope identifiers in the v2.0.0 branch (#8543) 
These changes may need to be warmed over.  I tried to fix things with
the least amount of disruption.   I just wanted to get the bugfix_v2.0.0
branch working for people again.
 2017-11-24 10:39:56 -06:00
Scott Lahteine
dc82babe8e Implement NANODLP_Z_SYNC for 2.0.x 2017-11-24 00:28:06 -06:00
Scott Lahteine
c6b0c104bb Adapt G26 to work for all meshes 2017-11-23 22:31:37 -06:00
Scott Lahteine
c19eb33408 Move G26 to gcode sub-folder 2017-11-23 21:43:23 -06:00
Scott Lahteine
c613a1ed38 Fix indentation, stepper.h dependency, etc. 2017-11-22 14:55:30 -06:00
Scott Lahteine
3269d8dd62 Tweak M42 var 2017-11-21 16:12:08 -06:00
Scott Lahteine
3066655727 Try port*100+pin, fix config dependency 2017-11-20 13:58:23 -06:00
Bob-the-Kuhn
a28ccabe2a M42 P1.20 fix 2017-11-20 13:58:02 -06:00
Scott Lahteine
c0000a0cdc Move servo code to modules/servo.* 2017-11-19 14:23:02 -06:00
Bob-the-Kuhn
c14000775b PWM fixes, slow down fan update 
include LPC1768 syntax for M42

couple more pin_t changes

consistency

change M42 to R, P format

Revert "change M42 to R, P format"

This reverts commit 01f12f579ec9ccc1bb9126e68d2c86449e9b7edf.
 2017-11-18 07:05:50 -06:00
Scott Lahteine
60adc6ff02 Display filwidth ratio in terms of E mm 2017-11-18 07:01:49 -06:00
Scott Lahteine
485abb023b
Merge pull request #8456 from thinkyhead/bf2_wednesday_tweaks 
[2.0] No retroactive adjustment with M851 Z
 2017-11-18 04:49:53 -06:00
Scott Lahteine
3bba7d60f3 No retroactive changes with M851 Z 
If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print.

To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account.

It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`.

One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values.

Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.
 2017-11-18 03:36:39 -06:00
Scott Lahteine
32512332df Apply some formatting 2017-11-18 03:12:30 -06:00
Scott Lahteine
50f09cc029 Miscellaneous cleanup 2017-11-16 00:47:16 -06:00
Scott Lahteine
9c3761047e
Merge pull request #8434 from thinkyhead/bf2_fix_M32_subroutines 
[2.0] Fix 'M32 P' subroutines
 2017-11-15 01:15:02 -06:00
Scott Lahteine
e0d367f1fb Fix M32 P subroutine handling 2017-11-15 00:44:21 -06:00
Scott Lahteine
2c8c30437e Fix parser parameter value handling 2017-11-14 23:20:33 -06:00
Scott Lahteine
e70b44dc0b Make sure leveled[] is defined for later use 2017-11-14 02:13:38 -06:00
Scott Lahteine
54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL 
[2.0] Add M114_DETAIL to Configuration_adv.h
 2017-11-14 00:28:55 -06:00
Scott Lahteine
009e3a7aa7 Add M114_DETAIL to Configuration_adv.h 2017-11-14 00:03:17 -06:00
Scott Lahteine
91baca6abb Patches for compiler warnings/errors 2017-11-13 04:43:47 -06:00
Scott Lahteine
2f73dec077 Apply native workspace fixes for G92, G53-59 2017-11-13 02:09:12 -06:00
Scott Lahteine
04abd8d459 Improve and clarify M428 code 2017-11-13 02:09:11 -06:00
Scott Lahteine
e8e92f8969 No leveling data in M114 if no leveling is enabled 2017-11-12 23:03:38 -06:00
Scott Lahteine
c938273bd5 Coding standard patch of M290 2017-11-11 22:14:21 -06:00
Scott Lahteine
98c1265e3b Disable laser power when PWM goes to 0 2017-11-11 22:00:22 -06:00
Scott Lahteine
36426af564
Merge pull request #8356 from tcm0116/2.0.x-M600 
[2.0.x] Normalize load/unload length in M600
 2017-11-10 19:44:08 -06:00
Scott Lahteine
1ed86adf9c Cleanup around updatePID 2017-11-10 19:27:34 -06:00
LVD-AC
e334efb2a7 PROBE_MANUALLY etc. 2017-11-10 19:27:33 -06:00
Scott Lahteine
cba9c1cf9e Add pre-calculated planner.e_factor 2017-11-10 03:14:24 -06:00
Scott Lahteine
c66696c507
Merge pull request #8344 from tcm0116/2.0.x-delta_height 
[2.0.x] Add delta_height variable in lieu of using home_offset
 2017-11-09 01:21:53 -06:00
Scott Lahteine
0cfb936dd1 Clarify some motion code 2017-11-08 22:15:55 -06:00
Thomas Moore
f34c3597dc Add delta_height variable in lieu of using home_offset 2017-11-08 22:10:08 -06:00
Scott Lahteine
e6788bb6ae Fix get_destination_from_command for E 2017-11-08 12:54:00 -06:00
Scott Lahteine
82f45c3e6a Patch G33 misuse of PROBE_MANUALLY 2017-11-08 00:36:06 -06:00
Scott Lahteine
96c9d715f3 Patch abuse of sprintf_P in G33 2017-11-07 17:33:50 -06:00
Colten Edwards
a6160916b0 [2.0] Fix M48 for delta printers/ABL compile issue (#8286) 
* fix M48 for delta printers

fix M48 for delta printers. home printer if not already homed.

* remove ENABLED(DELTA)

remove ENABLED(DELTA) as it is not needed.

* Update M48.cpp

* abl needs queue.h

without queue.h abl will not compile since there is a script that runs at the end of it and we need to queue it up.
 2017-11-07 15:36:33 -06:00
Scott Lahteine
17ef0a513b Update G92 for native workspace 2017-11-07 13:07:16 -06:00
Scott Lahteine
85a62bbf46 Misc. fixes to compiler warnings, etc. 2017-11-06 22:57:05 -06:00
Scott Lahteine
e6aba99f16 Fix M118 parameters, with strict guideline 2017-11-06 22:57:01 -06:00
Scott Lahteine
1b40e9c464 Implement CNC_COORDINATE_SYSTEMS 2017-11-04 22:28:46 -05:00
Scott Lahteine
a22434508f Match tweaks to G33 from 1.1 2017-11-04 22:28:46 -05:00
Scott Lahteine
d6aa127c76 Remove I2CPEM workspace offset 2017-11-04 22:28:46 -05:00
Scott Lahteine
79772219ae Fix Fan Multiplexer init 2017-11-04 22:28:46 -05:00