MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
10,933 Commits 1 Branch 0 Tags 129 MiB
bae8f82ba8
Commit Graph

504 Commits

Author SHA1 Message Date
Scott Lahteine
59fda986ea Allow Z_AFTER_PROBING to be 0 2018-04-30 03:25:47 -05:00
Scott Lahteine
9e0d99c0c6
Round all floats in string conversion functions (#10566) 2018-04-29 00:51:36 -05:00
Scott Lahteine
cd08f01bb4 Fix M421 comment in gcode.h 2018-04-28 11:16:52 -05:00
Scott Lahteine
8db7fb226a Fix M420 C for UBL 2018-04-28 08:14:20 -05:00
Marcio Teixeira
724e9f56c8 Removed "const" to match parser. (#10548) 2018-04-27 17:48:52 -05:00
Giuliano
2e1939e85c [2.0.x] report error on unsupported commands (#10553) 
Raise an error when an unknown/unsupported G/M command is requires.

This will address #10546
 2018-04-27 17:40:27 -05:00
Scott Lahteine
a51ba6e3f6 Fix ABL grid bounds test for Delta/SCARA 
Addressing #10538
 2018-04-27 02:23:10 -05:00
Scott Lahteine
63e0b36f8b Fix G29_RECOVER_COMMANDS typo 2018-04-27 02:23:10 -05:00
Scott Lahteine
eef0248a1c
Add M420 C to adjust the whole mesh (#10522) 2018-04-25 06:43:45 -05:00
Marcio Teixeira
02a711c4d6 [2.0.x] Fix crash upon repeated calls to process_subcommands_now_P (#10509) 2018-04-24 13:44:22 -05:00
Scott Lahteine
f06c3c38b9 Fix M0_M1 with no LCD 2018-04-24 09:22:05 -05:00
Scott Lahteine
f423e54f77 Strip trailing spaces 2018-04-23 18:00:43 -05:00
Scott Lahteine
cb46cb8480
Add HAS_HEATED_BED conditional (#10495) 2018-04-23 17:13:01 -05:00
Scott Lahteine
1c3d49afe0 Fix G28 with Z_AFTER_PROBING 
Fix #10476
 2018-04-22 01:23:26 -05:00
Scott Lahteine
023385ca59
Merge pull request #10479 from thinkyhead/bf2_creality_power_loss_resume 
[2.0.x] Creality3D Power-Loss Recovery
 2018-04-22 00:17:44 -05:00
Scott Lahteine
3396671011
[2.0.x] Reset LCD status to fallbacks (#10470) 
* Remove obsolete strings
* Tweak some static consts
* Reset LCD status to fallbacks
 2018-04-22 00:16:30 -05:00
Scott Lahteine
11ab017dd0 Creality3D Power-Loss Recovery 2018-04-21 21:56:50 -05:00
Scott Lahteine
7dcd0a1cff Add R parameter to G28 to specify pre-raise 2018-04-21 19:07:48 -05:00
Scott Lahteine
a90cbc6339
[2.0.x] Wait for bed heaters between probing (#10472) 2018-04-21 15:43:21 -05:00
Scott Lahteine
d8a8eec6ea Add THERMAL_PROTECTION capability 
Based on #10465

In response to `M115` the firmware reports if Thermal Protection is enabled (1) or not (0). This information can be used by software such as OctoPrint (more precisely the Printer Safety Check plugin) to warn users when Thermal Protection is not enabled in the firmware.

Co-Authored-By: andrivet <sebastien@advtools.com>
 2018-04-20 16:50:50 -05:00
Scott Lahteine
65a6a86d19 Don't report point 0 in MBL G29 2018-04-20 13:12:50 -05:00
Marcio Teixeira
5cc7916e69 Add G29_RETRY_AND_RECOVER feature 
- Add an option to retry G29, optionally executing a G-code procedure after each failed probe.
 2018-04-19 19:45:53 -05:00
Scott Lahteine
78ea4871f9 Fix up enqueue now functions 
…and apply to MALYAN_LCD.
 2018-04-19 19:45:53 -05:00
Scott Lahteine
df2f24617b Use 0 as the bed position (not Z_MIN_POS) 2018-04-17 20:32:56 -05:00
Scott Lahteine
52c024e260 M221 with no parameters report flow 2018-04-17 16:06:25 -05:00
Scott Lahteine
0746aff595 Improve UBL mesh report. Add M420 T, M421 N 2018-04-17 15:52:56 -05:00
Scott Lahteine
99282a46e9 Make sure ABL (manual) starts close to the bed 2018-04-13 20:19:30 -05:00
Scott Lahteine
3c5c6d478a Prettify process_parsed_command 2018-04-13 00:23:11 -05:00
Scott Lahteine
bb7064cc30 Tweak MBL move to bed code 2018-04-12 22:43:02 -05:00
Scott Lahteine
daa712455b Make sure MBL starts close to the bed 
Fix #10390
 2018-04-12 19:36:37 -05:00
Scott Lahteine
4c8751727a Fix M118 parameter handling 
Fix #10388
 2018-04-12 19:10:04 -05:00
Luc Van Daele
646aa20b43 Overhaul of G33 Delta Calibration (#8822) 2018-04-11 21:14:48 -05:00
Luc Van Daele
ac2e0afb62 Low Point for delta calibration (#10363) 2018-04-11 18:59:46 -05:00
Sean
2d9b0a66fe Add Filament Change accelerations 2018-04-09 23:57:27 -05:00
Scott Lahteine
8b8ad14178 Add Z_PROBE_LOW_POINT to prevent damage 2018-04-09 17:23:03 -05:00
Scott Lahteine
cea398849e Tweak to gcode_line_error/return 2018-04-07 21:25:49 -05:00
Scott Lahteine
e8e60263c8 Scale feedrate (mm/s to deg/s) for SCARA 2018-04-06 19:47:48 -05:00
Marcio Teixeira
8bc93c6f2b Improve heating/cooling LCD messages (#10293) 2018-04-04 18:29:27 -05:00
Scott Lahteine
241996d5d6
Merge pull request #10257 from thinkyhead/bf2_tool_change_debug 2018-04-02 19:33:45 -05:00
Scott Lahteine
adcb87f0db Z Endstop Servo => Z Probe Servo 2018-04-01 23:54:21 -05:00
Scott Lahteine
1a75165f35 For set_z_fade_height use set_bed_leveling_enabled 2018-03-31 22:43:05 -05:00
Scott Lahteine
55e9b85ad6 Clear the "Wait for user" message set by M0/M1 
See https://github.com/MarlinFirmware/Marlin/issues/10246#issuecomment-377146936
 2018-03-29 18:38:12 -05:00
AnHardt
c1f58a238d No delay in sensorless quick homing (#10254) 2018-03-29 16:10:20 -05:00
Scott Lahteine
1be955e52a Alert users about low Z jerk values 2018-03-28 23:08:33 -05:00
Scott Lahteine
9e4c037cef
Wait before turning off PRINTER_EVENT_LEDS at print end (#10248) 2018-03-28 22:59:28 -05:00
Scott Lahteine
7b8bb2519e Fix gcode_line_error call 
Followup to 3007eee
 2018-03-28 20:29:41 -05:00
Scott Lahteine
aa20b3ef7c Fix linear/3-point manual leveling buffer overrun 
Fixes #10137
 2018-03-28 18:41:22 -05:00
Scott Lahteine
38378cd0e8 M218 with DELTA needs planner.h 
Fix #10232
 2018-03-28 17:05:14 -05:00
Scott Lahteine
3007eee22e Require a checksum when writing to SD 
From #10204 by @adriancuzman
 2018-03-28 17:05:13 -05:00
Bob-the-Kuhn
9656a82609 Fix G53/CNC_COORDINATE_SYSTEMS compilation, Travis testing (#10227) 2018-03-28 14:14:39 -04:00
Rob Power
d1f14202a9 [2.0.x] NANODLP_Z_SYNC requires linear axes (#10240) 2018-03-28 14:03:34 -04:00
Scott Lahteine
1cb810ff1c
[2.0.x] Automatically reset stepper timeout (#10179) 
* Automatically reset stepper timeout in manage_inactivity

Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.

* blocks_queued => has_blocks_queued
 2018-03-21 19:30:06 -05:00
Scott Lahteine
045ee28c50 Tweaks to M915 2018-03-21 05:15:25 -05:00
Scott Lahteine
ff304d3767 Allow G53 to go back to native space 2018-03-21 01:38:25 -05:00
Scott Lahteine
bc45fb6b13 Tweak use of move_z_after_probing 2018-03-21 01:25:08 -05:00
Scott Lahteine
c352954882 Allow no raise after run_z_probe in probe_pt 2018-03-21 01:24:51 -05:00
Scott Lahteine
ae39fbd646 Also suppress keepalive with suspend_auto_report 2018-03-21 00:29:09 -05:00
Scott Lahteine
a46bac3100 Add 'I' parameter to M906/M913/M914; 'T' to M906/M913 2018-03-19 22:05:16 -05:00
Scott Lahteine
cfc13ed7f3 Quiet M906/M913/M914 with axes. Patch for DISTINCT_E_FACTORS. 2018-03-19 22:05:16 -05:00
Scott Lahteine
48d7036874 Consolidate smart stepper driver initialization 2018-03-19 22:05:16 -05:00
Scott Lahteine
dd2949922b Consolidate 3-point leveling point options 2018-03-19 04:12:20 -05:00
Scott Lahteine
8922b56b58 Fix some spelingz 2018-03-16 01:25:41 -05:00
Scott Lahteine
a6feb58837
Delta support for multiple hotends with offsets (#10118) 2018-03-16 00:46:42 -05:00
TheSFReader
2e43438e0c Add C parameter to M27 to include the long filename 
In answer to #10001

Add an option to retrieve the currently open file name (long filename if possible).
 2018-03-15 23:06:18 -05:00
Scott Lahteine
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069) 
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
 2018-03-13 01:15:22 -05:00
Scott Lahteine
5b45aab262 M218: report with no parameters 2018-03-12 08:14:35 -05:00
Scott Lahteine
28f1276286
[2.0.x] Add Z_AFTER_PROBING option (#10058) 
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
 2018-03-11 13:07:55 -05:00
Scott Lahteine
bae1cb859c Patch flush_and_request_resend for 1.1.x parity 2018-03-11 07:36:00 -05:00
Bob-the-Kuhn
0d8c15c01f restore PR 9661 files & V1 fix 2018-03-10 22:46:32 -06:00
Scott Lahteine
751785fc97 Followup to recent patches 
- `M666` is static, not inline
- Disambiguate some stepper macros
 2018-03-10 21:41:17 -06:00
Scott Lahteine
f003173752 Fixup M666 
Followup to d6df032
 2018-03-10 19:52:30 -06:00
Bob-the-Kuhn
bf59a4a6df
Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h" 2018-03-10 17:22:20 -06:00
Sebastianv650
fd1d590726 [2.0.x] Silence M204 (#10037) 
`M204` is often used by slicers to set acceleration depending on perimeter, infill, etc., so Marlin's answers are flooding the serial windows. Silence `M204` according to the philosophy that setter commands should only send a reply if no parameter is given.
 2018-03-10 07:16:55 -06:00
Scott Lahteine
d6df0322c2 Update M666 for XYZ dual endstops 2018-03-10 06:57:31 -06:00
Scott Lahteine
fbc41c0e98 Update Marlin G-code summary 2018-03-10 06:57:31 -06:00
Scott Lahteine
ddce486360
Merge pull request #10032 from thinkyhead/bf2_unknown_z_no_raise 
[2.0.x] Add UNKNOWN_Z_NO_RAISE to prevent Z grinding
 2018-03-10 00:57:30 -06:00
Scott Lahteine
419d12ca1b Add UNKNOWN_Z_NO_RAISE option 
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
 2018-03-10 00:17:34 -06:00
Bob-the-Kuhn
914bb80bde removed SDSS init 
added device & comm drivers for shared SPI LCDs

mistyped some updates in ultralcd_impl_DOGM.h

remove unwanted changes in onfiguration.h

still can't type

Update HAL_LCD_class_defines.h

include USB mass storage & misc
 2018-03-09 23:06:11 -06:00
Scott Lahteine
49ca67202f Patch configuration_store for extra serial port 
Fix #9948
 2018-03-09 07:42:27 -06:00
Scott Lahteine
3c2bfa5e53
Update powersupply_on in power_on/off (#10015) 
Fix #10004
 2018-03-08 18:56:47 -06:00
Scott Lahteine
42608b1925 Init old_red to 127 to ensure initial change 
Fix #10012
 2018-03-08 18:28:33 -06:00
Scott Lahteine
ffbf63e6af Add HAS_TEMP_SENSOR conditional 2018-03-07 01:53:50 -06:00
Scott Lahteine
920d92aa46
Merge pull request #9974 from thinkyhead/bf2_tmc_util_progmem 
[2.0.x] Move tmc_util.* extended_axis_codes to PROGMEM
 2018-03-07 00:16:50 -06:00
Scott Lahteine
b198b49d15 Followup to AUTO_REPORT_SD_STATUS 
Followup to #9832
 2018-03-07 00:13:42 -06:00
Scott Lahteine
2057177184 Make enums into implicit char 2018-03-06 23:39:56 -06:00
Scott Lahteine
e28e3bb532 Move extended_axis_codes to PROGMEM 2018-03-06 22:21:24 -06:00
Scott Lahteine
bf9fc8ac0e M851 - report only without parameters 2018-03-05 02:11:50 -06:00
Scott Lahteine
61620cbd15 Tweak M211 2018-03-02 02:20:40 -06:00
Scott Lahteine
6e08ddce6e Correct M401 / M402 description 2018-03-01 19:10:36 -06:00
Scott Lahteine
88b6a15b47 Update M900 verbiage 2018-03-01 15:11:31 -06:00
Scott Lahteine
91db7930dc Drop SCARA_FEEDRATE_SCALING 
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
 2018-03-01 04:30:41 -06:00
Scott Lahteine
118899357d
Add sanity checks to Linear Advance 1.5 (#9873) 2018-03-01 02:10:43 -06:00
Scott Lahteine
a446433c87
Fix SENSORLESS_HOMING for Core Kinematics (#9868) 2018-03-01 01:37:31 -06:00
TheSFReader
eb079959fb Report sd card progress [FR] #9751 (#9832) 
* SD Status auto-report feature
Feature Request #9751
 2018-02-26 15:38:27 -06:00
Scott Lahteine
3f89bbeab5 Drop a conditional only used once 2018-02-24 16:35:31 -06:00
Scott Lahteine
b2cf253a13 Add RESTORE_LEVELING_AFTER_G28 option 2018-02-23 13:38:54 -06:00
Scott Lahteine
65519263f4 Fix broken LEVEL_BED_CORNERS 
Fix #8805
 2018-02-23 09:13:34 -06:00
Scott Lahteine
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 (#9712) 2018-02-23 00:53:29 -06:00
Scott Lahteine
1d7f5be0ff quick_home_xy sensorless homing 2018-02-20 20:52:48 -06:00
Scott Lahteine
d4e4fe40e0 Add SENSORLESS_HOMING delay to quick_home_xy 
Fix #9471
 2018-02-19 10:12:16 -06:00
Scott Lahteine
3af988a7f3 Add sensorless homing delay to home_z_safely 
Based on #9705
 2018-02-18 19:28:40 -06:00
Scott Lahteine
8ffa0b24a4 Strip excess G28 debug logging 2018-02-18 01:11:41 -06:00
Kevin
9019ea0fce Option to force X or Y to home first when homing the other axis 2018-02-18 01:11:41 -06:00
Scott Lahteine
241e55ef3b Apply SERIAL_FLUSH macro 2018-02-16 17:32:12 -06:00
Scott Lahteine
6a70a4fbb3
Fix G26 circles (#9627) 
Easier to configure. Catch an odd divisor.
 2018-02-15 22:11:26 -06:00
Roxy-3D
c78e1c0f23
Fix G26 Circles... (#9641) 
* Fix G26 Circles...
 2018-02-15 11:15:15 -06:00
AnHardt
133b38b93b Complete M48 description (#9631) 2018-02-14 05:17:58 -06:00
Scott Lahteine
8d71ad37cb flush comment to match 1.1.x 2018-02-14 02:56:18 -06:00
Scott Lahteine
377108619b Fix plan_arc clockwise (G2) 
Fix #9482
 2018-02-11 03:34:25 -06:00
Scott Lahteine
e3043d7ac7 Fix #8744 2018-02-10 16:54:42 -06:00
Scott Lahteine
da693a636e Fix handling of escapes in serial input 2018-02-09 05:19:33 -06:00
Scott Lahteine
c30a8067ab Prevent watchdog reset due to many comments 
Addressing #7449
 2018-02-09 05:19:33 -06:00
Scott Lahteine
b7053156fe Minor comment/condition cleanup 2018-02-09 01:53:35 -06:00
Thomas Moore
1541224a81 Enable Z axis and delta sensorless homing (#9516) 2018-02-08 04:20:44 -06:00
Scott Lahteine
09c8807a36 Minor formatting in queue.cpp 2018-02-08 01:31:19 -06:00
Scott Lahteine
ca8fdff1af Comment G26 properly 2018-02-06 00:58:28 -06:00
Scott Lahteine
b5e92f4f90
[2.0.x] Enable / disable PSU automatically (#9503) 2018-02-06 00:22:30 -06:00
Scott Lahteine
a8c4174a13 M100 comment 2018-02-05 21:54:50 -06:00
GMagician
338dac258b [2.0.x] Fix compiler error when G26 is enabled (#9492) 2018-02-05 14:27:39 -06:00
Scott Lahteine
4ddb6a3a1f
Merge pull request #9470 from thinkyhead/bf2_malyan_clueless 
[2.0.x] Malyan M200 LCD
 2018-02-05 05:03:18 -06:00
Scott Lahteine
03bfc0d7c8
Merge pull request #9439 from thinkyhead/bf2_fix_G26_circle_bumps 
[2.0.x] Change G26 circle angles
 2018-02-04 19:05:18 -06:00
Scott Lahteine
e5ee0b6f6c Implement MALYAN_LCD 2018-02-04 18:52:44 -06:00
Scott Lahteine
2ea4e74ed3 Misc. comments 2018-02-04 17:40:39 -06:00
GMagician
6ace57e1b0 [2.0.x] remove duplicated include (#9445) 
This was present in #9357 but lost
 2018-02-03 19:32:05 -06:00
Scott Lahteine
e6cdc438fd Change G26 circle angles 
To prevent the nozzle from colliding with the printed pattern.
 2018-02-03 19:17:49 -06:00
Scott Lahteine
a8764ac5d5 G26 parity with 1.1.x 2018-02-02 05:19:14 -06:00
GMagician
e1117a8492 [2.0.x] fix compile errors when CNC_COORDINATE_SYSTEMS is enabled (#9380) 2018-02-02 01:45:46 -06:00
Bob-the-Kuhn
21179f8300 Fix the "slow" version of the G-code parser 2018-02-02 00:35:58 -06:00
Scott Lahteine
34160806c0 Fix broken G29 W I J 2018-02-01 21:37:35 -06:00
Scott Lahteine
f5cfdf6efe Use _BV32 to avoid name conflict 2018-02-01 21:37:35 -06:00
Scott Lahteine
fc5c1a28d8 Fix M118 parameter parsing 2018-01-24 00:30:13 -06:00
Scott Lahteine
399bca316a Fix has_value with FASTER_GCODE_PARSER 2018-01-24 00:30:13 -06:00
Scott Lahteine
80d3ded895 Change parser codebits from array to int32_t 2018-01-24 00:30:13 -06:00
Scott Lahteine
053b1371c7 Simplify G-code debug option 2018-01-24 00:06:07 -06:00
Scott Lahteine
608f8b10da Parser val method parity with 1.1.x 2018-01-24 00:06:07 -06:00
Scott Lahteine
2bea1bda56 Move more strings to PROGMEM 2018-01-24 00:06:06 -06:00
Scott Lahteine
1dcfe193ac Optimize some serial strings 2018-01-23 19:14:00 -06:00
Scott Lahteine
9644fe1839 Lightly optimize arc length calculation 2018-01-23 19:13:59 -06:00
Scott Lahteine
c9bda932fe
Patch M114 D logical output 2018-01-23 18:50:37 -06:00
Scott Lahteine
e5ca60acf5 Patch G29 no_action for A and Q 2018-01-23 14:00:06 -06:00
Thomas Moore
3db35ba9be [2.0.x] Fix change filament for delta machines (#9295) 2018-01-22 10:21:42 -06:00
Scott Lahteine
b1cd012aa6 Clean up and document load/unload/pause/resume 2018-01-22 05:45:46 -06:00
GMagician
9b519864bf [2.0.x] Relative movements fix (#9259) 2018-01-20 15:22:03 -06:00
Roxy-3D
bfd9728cf4
Serial buffer over run work around for v2.0.0 (#9236) 
* Work around for serial buffer over run

PronterFace sends a lot of M105 commands.  During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer.   This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.

Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
 2018-01-18 19:57:18 -06:00
Roxy-3D
f5f1b069ad
Convert UBL mesh tilting to all use the same algorithm (#9204) 
A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also.

The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.
 2018-01-16 11:08:00 -06:00
Scott Lahteine
d178d6e921 M503 patch for EEPROM_CHITCHAT off 
Fix #9155
 2018-01-15 06:09:25 -06:00
Scott Lahteine
2c18faf3e4 General cleanups for HAL 2018-01-15 02:46:37 -06:00
Scott Lahteine
6a043eee55 Various updates for TMC support 2018-01-10 23:04:48 -06:00
Thomas Moore
f7efac57b7 Multi-host support 2018-01-10 00:14:47 -06:00
Scott Lahteine
a94104dbb5
Merge pull request #9113 from teemuatlut/TMC_followup 
[2.0.x]TMC followup
 2018-01-09 18:46:35 -06:00