MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
3,020 Commits 1 Branch 0 Tags 129 MiB
c3560e0288
Commit Graph

2422 Commits

Author SHA1 Message Date
Scott Lahteine
9189cc66ab Fix moves for DELTA for MANUAL_BED_LEVELING 
- Use `line_to_current` in place of `plan_buffer_line`
 2015-04-09 04:32:14 -07:00
Scott Lahteine
7a1aef1450 Merge pull request #1877 from AnHardt/display-only 
Made encoderPosition and quick_feedback dependant on NEWPANEL
 2015-04-09 03:54:05 -07:00
Scott Lahteine
6096164d79 Merge pull request #1878 from thinkyhead/cold_extrude 
Cold extrude
 2015-04-09 03:41:54 -07:00
Scott Lahteine
a488445cbe Fix spelling of "too" 2015-04-09 03:41:31 -07:00
Scott Lahteine
b1950a7f25 Merge pull request #1875 from Natealus/Development 
Z Probe inverting not present in example configs, causes error
 2015-04-09 03:37:24 -07:00
AnHardt
df50523605 Made encoderPosition and quick_feedback dependant on NEWPANEL 
where the hardware is available.
Fix for #1873
 2015-04-09 12:26:45 +02:00
Scott Lahteine
2ca099d1e7 Merge pull request #1876 from thinkyhead/cold_extrude 
Catch dangerous extrude before trying several
 2015-04-09 03:21:19 -07:00
Scott Lahteine
837ceb9abb Merge pull request #1867 from epatel/Development 
Added sanity check for MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS
 2015-04-09 02:29:47 -07:00
Scott Lahteine
a95544f92a Spell adjustment 2015-04-09 02:04:06 -07:00
Scott Lahteine
a00ebf03d4 Merge pull request #1868 from AnHardt/LCD_STR 
Moved the definitions of the LCD_STR_* to Conditionals.h
 2015-04-09 01:56:23 -07:00
Scott Lahteine
1269c445ab Catch dangerous extrude before trying several 2015-04-09 01:40:48 -07:00
Natealus
585eee6549 Z Probe inverting not present in example configs, causes error 
The line const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to
invert the logic of the endstop is in the main configuration.h but
wasn't present in the example configuration.h's. Causes a compiling
error with Z Probe enabled. Just added it to all the configs. :)
 2015-04-08 18:57:30 -06:00
AnHardt
540dbb35e2 And an other MSG_BED in Marlin_main.cpp 2015-04-09 01:16:06 +02:00
AnHardt
14d4419e16 Replaced SERIAL_PROTOCOLPGM(MSG_BED) with SERIAL_PROTOCOLPGM("Bed") 
Resolved some warnings in Marlin_main.cpp regarding compares of signed and unsigned integers by replacing 'int' or 'uint16_t' with 'uint8_t'.
 2015-04-08 23:59:01 +02:00
AnHardt
ea897654a4 Moved the definitions of the LCD_STR_* to Conditionals.h 
to avoid errors in Marlin_main.cpp. #1860

In the include tree of Marlin_main.cpp the decision between the display types is not made.
To include the right LCD_STR_* ether 'dogm_lcd_implementation.h' or 'ultralcd_implementation_hitachi_HD44780.h' with all their code.
A 'dogm_lcd_implementation.h.h' would be a curiosity.
So i moved both of the definition blocks to conditionals.h

On the long term it could make sense to use the same numbering for the u8glib and the hitachi symbols.
 2015-04-08 21:53:58 +02:00
Edward Patel
7dc64efe67 Added sanity check for MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS 2015-04-08 20:52:48 +02:00
AnHardt
6a514f3dc9 Aplied HAS_LCD_CONTRAST also to Marlin_main.cpp 
and cleaned typo.
 2015-04-08 13:26:29 +02:00
AnHardt
a76fb42ca6 Merge https://github.com/MarlinFirmware/Marlin into contrast 2015-04-08 13:05:21 +02:00
AnHardt
bcc04192fc Remove Contrast Menu for U8GLIB_ST7920 
The other two devices we use in u8glib have more than only dummy code.
Checked this in the library code.
 2015-04-08 12:56:38 +02:00
Scott Lahteine
4788b59300 Thermistor values for configurator 2015-04-08 03:12:21 -07:00
Scott Lahteine
bb917ecda8 Merge pull request #1853 from thinkyhead/dev_version 
Set version to "1.0.3 dev"
 2015-04-08 01:57:51 -07:00
Scott Lahteine
caa7734402 Merge pull request #1864 from thinkyhead/is_running 
IsStopped / IsRunning inline
 2015-04-08 01:10:36 -07:00
Scott Lahteine
3162971cd6 current_position not static 2015-04-08 01:05:39 -07:00
Scott Lahteine
27cb90da8b IsStopped / IsRunning inline 2015-04-08 00:56:19 -07:00
Max
07fc2b5b70 Update language_ru.h 2015-04-08 13:18:45 +06:00
Scott Lahteine
756bb5e268 Cleanup formatting in hitachi & dogm lcd 2015-04-07 22:04:10 -07:00
Scott Lahteine
7431ef7e2d Merge branch 'Development' into dev_version 
Latest upstream commits
 2015-04-07 21:14:00 -07:00
Scott Lahteine
43773ff735 Formatting and lcd contrast masking 2015-04-07 21:11:03 -07:00
Scott Lahteine
eb6e3886f4 Set version to "1.0.3 dev" 2015-04-07 20:38:43 -07:00
Scott Lahteine
cf9b58452c Minimum delay in menu click feedback 
Squished #1849
 2015-04-07 20:20:30 -07:00
Scott Lahteine
1d291be2ba Fix de after PREVENT_DANGEROUS_EXTRUDE 
- Set `de` to 0 when `position[E] = target[E]`
- Address regression mention in #1846
 2015-04-07 20:01:08 -07:00
Scott Lahteine
e03da4805b Merge pull request #1774 from epatel/Development 
Mesh bed leveling: Added G29 S3 + finer display steps during manual input + bug fix
 2015-04-07 19:24:46 -07:00
Scott Lahteine
f7c4e7e19f Fix G29 not deploying in some instances 2015-04-07 15:38:29 -07:00
Edward Patel
a9ed39b12d Moved checks into SanityCheck.h + removed previous added checks. 2015-04-07 22:58:08 +02:00
Edward Patel
002340f32c Merge branch 'Development-Marlin' into Development 2015-04-07 22:49:12 +02:00
Scott Lahteine
c379f17117 Encapsulate setting of homing_bump_feedrate 2015-04-06 23:21:33 -07:00
Scott Lahteine
7d2c2f1790 Updates for the configurator 
- Sections in all `Configuration_adv.h`
- Recognize JAPANESE/WESTERN/CYRILLIC options
- Better capturing of comments for tooltips
 2015-04-06 23:16:01 -07:00
Scott Lahteine
967db181d0 Latest upstream commits 2015-04-06 21:46:18 -07:00
Scott Lahteine
e502144eda Fixup formatting of last commit 2015-04-06 21:28:14 -07:00
Scott Lahteine
d05efa008d Merge pull request #1825 from shaggythesheep/bugfix_no_heaters 
Bugfix: Temperature checks when no heaters in use
 2015-04-06 21:25:22 -07:00
Scott Lahteine
d20f42c883 Don't stow the probe until the last grid point! 
- Address Issue #1682 at hash #issuecomment-89756858
 2015-04-06 20:58:09 -07:00
Scott Lahteine
5c2bb05af3 Merge pull request #1839 from AnHardt/fix-statusmessage 
Fix lcd_status_message
 2015-04-06 19:08:25 -07:00
Scott Lahteine
d70a4a3847 Merge pull request #1823 from AnHardt/splashscreen 
Disable splash-screen when done once
 2015-04-06 18:48:48 -07:00
Scott Lahteine
56aea5f8e5 Merge pull request #1829 from Natealus/Development 
Azteeg X3 Pro Pin fix ups
 2015-04-06 18:19:33 -07:00
Scott Lahteine
6a860b99dc Merge pull request #1828 from Wackerbarth/Configurator 
Update Configurator Files
 2015-04-06 18:09:26 -07:00
AnHardt
ac843fbf3b Fix lcd_status_message 
Because we now can use utf8 with up to 3 bytes per symbol,
lcd_status_message[] must be 3*LCD_WIDTH wide.
Filling up the message, or cutting to length, are fixed to.

Fix for #1832 about at the end.
 2015-04-07 02:33:34 +02:00
Scott Lahteine
6d084c017f Fix typo in FWRETRACT handler 
Should be `retracting` and not `retract`
 2015-04-06 17:04:22 -07:00
Edward Patel
d27c82a450 Added check for Delta printers in Mesh, #error not yet supported. 2015-04-06 23:03:06 +02:00
Edward Patel
9a093b2e8f Added #error + mention not to enable ABL and Mesh at the same time 2015-04-06 19:38:59 +02:00
AnHardt
6ae714894e Now the simplycistic solution. 
Just and only display splashscreen only once.
 2015-04-06 12:43:38 +02:00
AnHardt
d521693641 Revert "Draw content in display loop only when needed" 
This reverts commit bf04a92cc0.
 2015-04-06 12:31:31 +02:00
Natealus
b6f2bff461 Azteeg X3 Pro Pin fix ups 2015-04-05 23:34:56 -06:00
Scott Lahteine
d867c18535 Fix compile error with Z_DUAL_ENDSTOPS 2015-04-05 20:48:08 -07:00
Richard Wackerbarth
46474cf2f2 Incorporate @section headers from configurator 2015-04-05 22:39:40 -05:00
Richard Wackerbarth
cf66cb8808 Bring configurator up-to-date 2015-04-05 22:38:15 -05:00
Richard Miles
1a5293c2ce Prevents MINTEMP / MAXTEMP when no heaters present 
This commit checks whether or not HEATER_0 is in use, and if not, skips
the MIN / MAX temperature checks.
 2015-04-05 22:27:14 +01:00
Edward Patel
5360158545 Merge branch 'Development-Marlin' into Development 2015-04-05 20:28:44 +02:00
AnHardt
bf04a92cc0 Draw content in display loop only when needed 
Example for splash screen.
 2015-04-05 12:53:20 +02:00
AnHardt
9865318f1c Disable splash-screen when done once 
Splash screen was shown with every display init.
That means every time the menus where entered.

Note the 2 in the initialisation.
The buffer is already written in two steps a 512 byte.
Without the 2 only the upper half is shown.
 2015-04-05 12:24:01 +02:00
Scott Lahteine
53eb662908 Have the configurator read from MarlinFirmware repo 2015-04-04 20:19:17 -07:00
Edward Patel
d24ea7c03f Added Comment in hope of github seeing these updates 2015-04-05 05:14:06 +02:00
Edward Patel
61de6ecd54 Added change to example Configuration.h's 2015-04-05 04:26:35 +02:00
Edward Patel
2f0081bbb5 Compile error fix! Fix for merge artifacts. 2015-04-05 04:16:16 +02:00
Edward Patel
0e6514e7bd Bug fix! Missed putting z value back in right slot after zigzag mod. 2015-04-05 04:13:34 +02:00
Edward Patel
ea10601406 Merge branch 'Development-Marlin' into Development 
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
 2015-04-05 04:06:02 +02:00
Scott Lahteine
cb02bc6db4 Merge pull request #1817 from AnHardt/dogm_looptest 
Execute DOGM display-loop less often
 2015-04-04 17:29:56 -07:00
quillford
b02a55e60f Fixed scara directions 
Config said for a delta instead of for a scara
 2015-04-04 15:26:35 -07:00
Scott Lahteine
6c5f07c5cb Merge pull request #1813 from thinkyhead/fixup_probing 
Fix bad thermal runaway trigger
 2015-04-04 14:41:43 -07:00
AnHardt
340d165a9c Reduce display updates for dogm displays 
In 'if (encoderPastThreshold || LCD_CLICKED)' lcdDrawUpdate was not set.

'lcd_status_update_delay'-loop was not effective in  function
lcd_status_screen().
The loop prevented the update of the status screen but not the displays
update.
Shifted the loop into lcd_update().
 2015-04-04 22:02:24 +02:00
AnHardt
418d22d7b3 Revert "Testloop cleanup" 
This reverts commit 6361404b91.
 2015-04-04 18:33:36 +02:00
AnHardt
6361404b91 Testloop cleanup 
Shifted condition should still be in.
 2015-04-04 17:56:13 +02:00
AnHardt
6d4b3f0d6a Move the condition before the loop 
Result see: https://youtu.be/AEnBzdu9_tk
Dot is moving not so fast -> less executed loops.
 2015-04-04 17:49:39 +02:00
AnHardt
4cb7dfc546 Move the 'alive dot' in every displayloop 
Result see: https://www.youtube.com/watch?v=tdu7J0i-c4g
Loop is executed several times per display update.
 2015-04-04 17:34:28 +02:00
Scott Lahteine
b0f198c153 heater_index above its use 2015-04-04 06:18:08 -07:00
Scott Lahteine
60f8e0386f More thermal runaway states 2015-04-04 05:45:36 -07:00
Scott Lahteine
f9dbd73652 Fix tr_target_temperature type - float! 2015-04-04 05:25:53 -07:00
Scott Lahteine
c83faa9c5e Merge pull request #1811 from thinkyhead/fixup_probing 
Compare indices instead of floats for probe actions
 2015-04-04 05:14:59 -07:00
Scott Lahteine
61f8394361 Compare indices instead of floats for probe actions 2015-04-04 05:01:16 -07:00
Scott Lahteine
a98183b463 Merge pull request #1809 from Wackerbarth/LanguageCleanup 
Deferring default definition made #undef unnecessary
 2015-04-04 04:37:20 -07:00
Scott Lahteine
41ded7e996 Merge pull request #1805 from thinkyhead/fixup_probing 
Optimize coordinate copying, fix EXTRUDER_RUNOUT_PREVENT
 2015-04-04 03:49:54 -07:00
Richard Wackerbarth
4119738e69 Deferring default definition made #undef unnecessary 2015-04-04 05:48:07 -05:00
Scott Lahteine
6f06d33be5 Fix missing refresh_cmd_timeout function 2015-04-04 03:47:25 -07:00
Scott Lahteine
2d099a2c70 Fix missing backslash in macro 2015-04-04 03:35:16 -07:00
Scott Lahteine
0f9b29e6c5 Merge pull request #1803 from Natealus/Development 
Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro
 2015-04-03 23:45:05 -07:00
Scott Lahteine
0935084141 Fix manage_inactivity 
- Document `manage_inactivity` function
- Allow `EXTRUDER_RUNOUT_PREVENT` to work with all extruders
- Use faster `memcpy` for copying coordinates
 2015-04-03 23:42:50 -07:00
Scott Lahteine
c065da52ec Spacing and spelling 2015-04-03 22:54:48 -07:00
Scott Lahteine
a3e129e091 Merge pull request #1801 from thinkyhead/fixup_probing 
Minor optimizations
 2015-04-03 22:30:01 -07:00
Natealus
ab11f90da0 Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro 
Just a simple #ifdef Z_PROBE_ENDSTOP to define the pin for it. Also has
a couple commented lines for switching Z_MIN_PIN if needed.
 2015-04-03 23:14:03 -06:00
Scott Lahteine
8680b515b0 Fix missing tmp_extruder -> target_extruder 2015-04-03 22:12:49 -07:00
Natealus
a6ba40ae48 Compiling error temperature.cpp with multiple extruders defined 
It wouldn't compile because of this line in temperature.cpp it turns out
it was just a stray ( that didn't line up with the previous lines so I
just made it in line with the rest and it compiled fine.
 2015-04-03 23:09:31 -06:00
Scott Lahteine
fc3c76fc16 Fix #1800 2015-04-03 22:04:42 -07:00
Scott Lahteine
c185912c19 Latest upstream commits, mostly 2015-04-03 21:58:48 -07:00
Scott Lahteine
1e5c18bb14 Add code_value_short and SERIAL_CHAR 2015-04-03 21:43:30 -07:00
Scott Lahteine
e0d4368cb5 Minor code cleanup, move NUM_AXIS out of config 2015-04-03 20:45:24 -07:00
Scott Lahteine
4c7af484f8 Merge pull request #1787 from thinkyhead/fixup_tr 
Fix: thermal_runaway_protection triggered by target temperature increase
 2015-04-03 20:06:56 -07:00
Scott Lahteine
c747becec1 Merge pull request #1796 from thinkyhead/pidbed_temp_eeprom 
Add PIDTEMPBED to EEPROM
 2015-04-03 20:03:38 -07:00
Scott Lahteine
84e4edaea7 Add M48 comment for #1794 2015-04-03 19:52:00 -07:00
Scott Lahteine
9ba55baa5b Track target temperature separately for each heater 2015-04-03 19:42:40 -07:00
Scott Lahteine
528e32a1d4 Fix timeout in thermal_runaway when temperature is set higher 2015-04-03 19:34:55 -07:00
Scott Lahteine
b98ebd517e disable / enable_all_steppers functions 2015-04-03 19:25:22 -07:00