MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
16,001 Commits 1 Branch 0 Tags 129 MiB
c6c5cc7246
Commit Graph

13751 Commits

Author SHA1 Message Date
LinFor
323bf47738 FTDI EVE: Cyrillic font, some minor fixes (#20517) 2021-04-29 08:45:10 -05:00
yysh12
ad15890a81 Improve plan_arc circle detection (#20440) 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
 2021-04-29 08:45:09 -05:00
wmariz
60aeed99c6 Refactor 'Level Corners with Probe' (#20460) 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
 2021-04-29 08:45:09 -05:00
Jan Krajdl
c529209c8f Support RGBW on PCA9632 (#20455) 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
 2021-04-29 08:45:09 -05:00
Tanguy Pruvot
be3e45d759 Fix G28 leveling state, UBL compile (#20499) 2021-04-29 08:45:09 -05:00
Victor Oliveira
7c8cff0d3c Unify FYSETC F6 1.3 / 1.4 (#20507) 
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
 2021-04-29 08:45:09 -05:00
Serhiy-K
256e94980e STM32F1xx support for TFTGLCD (#20515) 2021-04-29 08:45:09 -05:00
Keith Bennett
aa65c6e477 Anet ET4 / ET4P and Anet TFT28 / TFT35 (#20280) 2021-04-29 08:45:09 -05:00
Sean McGroty
59b5cb6fe2 Creality v4.3.1 (Ender 6) board (#20512) 2021-04-29 08:45:09 -05:00
X-Ryl669
a33c689c40 Improve Touch Calibration screen (#20524) 2021-04-29 08:45:09 -05:00
Jason Smith
30d9839631 Overrides to prevent STM32 timer conflicts (#20545) 2021-04-29 08:45:09 -05:00
Chris Pepper
f0b7f27029 Fix UBL mesh inset Z position (#20538) 2021-04-29 08:45:09 -05:00
Jason Smith
a1313c7066 Improve STM32 timer conflict messages (#20544) 2021-04-29 08:45:09 -05:00
LinFor
31c84d4559 FTDI EVE custom user menus (#20518) 2021-04-29 08:45:09 -05:00
LinFor
076f12e82d 12-bit ADC resolution for STM32 (#20519) 2021-04-29 08:45:09 -05:00
LinFor
231e5a5eed Add Tune -> Advanced Settings to FTDI EVE (#20532) 2021-04-29 08:45:09 -05:00
Scott Lahteine
350dc4ca05 Tweak FTDI spacing 2021-04-29 08:45:09 -05:00
Scott Lahteine
ff2f6cb110 Robin pins followup 2021-04-29 08:45:09 -05:00
LinFor
b667722184 Fix some Russian (#20529) 2021-04-29 08:45:09 -05:00
cr20-123
bc3f2f246f Fix G34 compile with bed leveling disabled (#20537) 2021-04-29 08:45:09 -05:00
Sebastiaan Dammann
28548e7ea2 Add BTT SKR CR6 board (#20522) 2021-04-29 08:45:09 -05:00
Scott Lahteine
023ef753b9 Clean up some pins 2021-04-29 08:45:09 -05:00
Dick Streefland
b799d0d073 Apply HOME_AFTER_DEACTIVATE for 'G28 O' (#20525) 2021-04-29 08:45:09 -05:00
Dick Streefland
be6e1ccba2 Get E3V2 DWIN MACHINE_SIZE from config (#20526) 2021-04-29 08:45:09 -05:00
Serhiy-K
525cdeae19 Update Russian and Ukrainian languages (#20508) 2021-04-29 08:45:09 -05:00
Scott Lahteine
c831aabe14 Languages cleanup 2021-04-29 08:45:09 -05:00
Foxies
642110b072 Migrate Hispeedv1 (QQS-Pro) to HAL/STM32 (#20354) 2021-04-29 08:45:09 -05:00
Jason Smith
56e2f39175 Fix Creality EEPROM watchdog freq. (#20510) 2021-04-29 08:45:09 -05:00
InsanityAutomation
3e26e23e60 Probe Tare, Probe Activation Switch (#20379) 
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
Co-authored-by: Victor Mateus Oliveira <rhapsodyv@gmail.com>
Co-authored-by: Jason Smith <jason.inet@gmail.com>
 2021-04-29 08:45:09 -05:00
InsanityAutomation
588fec6474 Minimum temp options for Probing and G12 Nozzle Clean (#20383) 
Co-authored-by: Jason Smith <jason.inet@gmail.com>
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
 2021-04-29 08:45:09 -05:00
Keith Bennett
87fbb89330 Let boards set Default TMC Slave Addresses (#20498) 
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
 2021-04-29 08:45:09 -05:00
Scott Lahteine
a4701fbd3e Tweaks for pins_BTT_SKR_common.h 2021-04-29 08:45:09 -05:00
Scott Lahteine
e02fd232ba Rename QUIET_PROBING 2021-04-29 08:45:09 -05:00
Tanguy Pruvot
f7f531e59d DOGM: Slow down touchscreen calibration (#20454) 2021-04-29 08:45:09 -05:00
Victor Oliveira
51e3d8f08b MKS Robin Nano V3 and STM32F4x0Vx Variant (#20430) 2021-04-29 08:45:09 -05:00
grauerfuchs
02b65de6a2 Fix and optimize MightyBoard (#20493) 2021-04-29 08:45:09 -05:00
Jason Smith
c3a1cd10ab Balance CI tests (#20485) 2021-04-29 08:45:09 -05:00
nb-rapidia
e5d094d2bd Make M220 B / R a standard feature (#20355) 2021-04-29 08:45:09 -05:00
ellensp
d6efe75251 Fix ZoneStar LCD 2004 buttons (#20489) 2021-04-29 08:45:09 -05:00
rafaljot
f50abfcb1b Homing feedrates as XYZ array (#20426) 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
 2021-04-29 08:45:09 -05:00
Scott Lahteine
bee6b8af8f Use homing_feedrate function 2021-04-29 08:45:09 -05:00
Tanguy Pruvot
1b6db623a7 Update French language (#20472) 2021-04-29 08:45:09 -05:00
Scott Lahteine
a45603a344 Update Hungarian language 
Co-Authored-By: Zs.Antal <45710979+AntoszHUN@users.noreply.github.com>
 2021-04-29 08:45:09 -05:00
Giuliano Zaro
fa9463528d Update Italian language (#20480) 2021-04-29 08:45:09 -05:00
Scott Lahteine
82b6044dbb Trust STM32 gcc versions 2021-04-29 08:45:09 -05:00
Scott Lahteine
be7aab204f Update some LCD includes 2021-04-29 08:45:09 -05:00
Scott Lahteine
f82b3f0f51 Update some pins errors 2021-04-29 08:45:09 -05:00
Sebastiaan Dammann
3d7680a426 Creality v4.5.3 (CR-6 SE, CR-6 MAX) (#20468) 2021-04-29 08:45:09 -05:00
JoAnn Manges
878305671b Fix RESTORE_LEVELING_AFTER_G28 (#20471) 2021-04-29 08:45:09 -05:00
Scott Lahteine
46d2dc9bee Please install the EditorConfig plugin 2021-04-29 08:45:09 -05:00
Scott Lahteine
e188b3e28c Auto-check followup 2021-04-29 08:45:09 -05:00
kisslorand
a59164d5c8 Fix M1001 auto-check logic (#20456) 2021-04-29 08:45:09 -05:00
Scott Lahteine
e6b3c74069 Always enable leveling after G28 2021-04-29 08:45:09 -05:00
Scott Lahteine
20bd54f6d3 Preheat before leveling 2021-04-29 08:45:09 -05:00
Scott Lahteine
6599e4ea53 Fix formatting 2021-04-29 08:45:09 -05:00
Chris Pepper
5617d64119 LPC176x framework update (#20469) 2021-04-29 08:45:09 -05:00
Scott Lahteine
b81a9e54a3 SHORT_MANUAL_Z_MOVE => FINE_MANUAL_MOVE 2021-04-29 08:45:09 -05:00
Scott Lahteine
cbe27daafb Adjust planner debugging 2021-04-29 08:45:08 -05:00
FanDjango
430855fdca Probe Offset Wizard followupBack to PROBE_PT_RAISE/separate STOW, make "PROBING" msg appear (#20439) 
* Go back to always use PROBE_PT_RAISE with a discrete stow. This ensures a raise above the bed, while stowing prior to exiting the wizard.
* Fix issue preventing text while moving to X/Y position
Co-authored-by: FanDjango <FanDjango@users.noreply.github.com>
 2021-04-29 08:45:08 -05:00
qwewer0
e9bde7e6fc Improve ASSISTED_TRAMMING_WIZARD probe stowing (#20437) 
* When BLTOUCH_HS_MODE enabled, stow pin before user interaction
* For all probes, ensure probe stows at end of wizard
 2021-04-29 08:45:08 -05:00
ellensp
5aebc9fb0c Add HAS_PIN_27_BOARD for CREALITY_V4 (#20446) 
Co-authored-by: ellensp <ellensp@hotmsil.com>
 2021-04-29 08:45:08 -05:00
leodoener
d0c2b643f8 Fix SDCARD_SORT_ALPHA on Ender 3 V2 (#20443) 2021-04-29 08:45:08 -05:00
Scott Lahteine
c0ad4718a4 Better animated boot screen 2021-04-29 08:45:08 -05:00
FanDjango
74042d368e Probe offset wizard fixes (#20414) 
* STOW probe, reverting incorrect earlier change from #20344
* Adjust soft endstop disables, to ensure travel below bed functions properly

Co-authored-by: FanDjango <FanDjango@users.noreply.github.com>
 2021-04-29 08:45:08 -05:00
elasticdotventures
2a5b32f109 Z_SENSORLESS sanity checks (#20421) 
Co-authored-by: Jason Smith <jason.inet@gmail.com>
 2021-04-29 08:45:08 -05:00
ellensp
0c383b858f Fix UBL Debug Messages (#20423) 
Co-authored-by: ellensp <ellensp@hotmsil.com>
 2021-04-29 08:45:08 -05:00
Keith Bennett
aecfd95592 Clarify "not Interrupt-capable" error message (#20419) 2021-04-29 08:45:08 -05:00
Victor Oliveira
9f740d1872 MKS Robin Pins fixes for STM32 and STM32F1 (#20404) 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
 2021-04-29 08:45:08 -05:00
InsanityAutomation
70d393b5cd Move ExtUI ABL mesh edit, limit to bilinear (#20381) 
* Move ExtUI call

Co-authored-by: Scott Lahteine <github@thinkyhead.com>
Co-authored-by: Victor Mateus Oliveira <rhapsodyv@gmail.com>
Co-authored-by: Sebastiaan Dammann <sebastiaandammann@outlook.com>
 2021-04-29 08:45:08 -05:00
Marcio T
f193cda03b Fixes and additions to FTDI EVE Touch UI (#20393) 
- Fixed name conflict with "SUBSCRIPT_TWO"
- Fixed rendering bugs in "Leveling Menu"
- Only show "Bed Mesh Screen" when UBL is enabled
- Removed CocoaPress code from generic "Main Menu"
- Removed CocoaPress code from LulzBot Bio "Status" screen
- Moved generic "Move Axis" functionality into a base class
- Added CocoaPress custom screens:
   - Status Screen
   - Unload Cartridge
   - Load Chocolate
   - Main Menu
   - Advanced Settings
   - XYZ Move (based on "Move Axis" base class)
   - Extrusion Move (based on "Move Axis" base class)
- CocoaPress tweaks to "Temperature" screen
- Fix FTDI EVE Touch UI compilation errors when not using leveling.
 2021-04-29 08:45:08 -05:00
Mike La Spina
e3e9982fec Fix Spindle/Laser Control menu (#20347) 2021-04-29 08:45:08 -05:00
swissnorp
4ca3c0bc86 Allow positive Z nozzle to probe offset (#20344) 
* Allow a positive value for z offset from nozzle to probe without sanity checks
* Simplify menu_probe_offset.cpp (HOMING_Z_WITH_PROBE)
* Add some more explanation to Configuration Files
* Raise after probe_at_point as if homed

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
Co-authored-by: Jason Smith <jason.inet@gmail.com>
 2021-04-29 08:45:08 -05:00
Keith Bennett
38bb3b86d2 Clarify Delta & SCARA config location (#20403) 2021-04-29 08:45:08 -05:00
Scott Lahteine
ad7fe15154 Style, spacing, typo cleanup for recent changes 2021-04-29 08:45:08 -05:00
Victor Oliveira
91e9599554 SPI TFT for STM32F4 boards (#20384) 
* fix pinsDebug for F1 boards

* add MKS Robin PRO V2 board - development board

* tft spi working with F4 boards

* pins formating

* sanity check for TFT on supported cores in STM32

* Fix tabs/spaces in pins file

Co-authored-by: Jason Smith <jason.inet@gmail.com>
 2021-04-29 08:45:08 -05:00
ellensp
47fd7fcaea Allow BTT EXP-MOT be used with Displays that needs only EXP 1 (#20396) 
Co-authored-by: ellensp <ellensp@ellensp-HP-ProBook-6470b.fritz.box>
Co-authored-by: Victor Mateus Oliveira <rhapsodyv@gmail.com>
 2021-04-29 08:45:08 -05:00
ellensp
50247fc894 Shorten Filament Load/Unload Strings to Fit on Graphical Displays (#20369) 
Co-authored-by: ellensp <ellensp@ellensp-HP-ProBook-6470b.fritz.box>
Co-authored-by: Victor Mateus Oliveira <rhapsodyv@gmail.com>
 2021-04-29 08:45:08 -05:00
Scott Lahteine
37dd0fd2d6 Fix auto#.g file handling, add NO_SD_AUTOSTART (#20071) 2021-04-29 08:45:08 -05:00
Scott Lahteine
1932e70e72 More LPC P-string macros 2021-04-29 08:45:08 -05:00
Scott Lahteine
ea81790d48 Watch idle() depth over 5 2021-04-29 08:45:08 -05:00
Scott Lahteine
2384e5c9c9 Fix fileExists, use openFailed 2021-04-29 08:45:08 -05:00
Scott Lahteine
3a73f04fd3 G28 followup 2021-04-29 08:45:08 -05:00
Scott Lahteine
107834f899 G28 tweaks 2021-04-29 08:45:08 -05:00
Scott Lahteine
b6cd7aaf17 Fix STM32F1 SERIAL_GET_TX_BUFFER_FREE 2021-04-29 08:45:08 -05:00
Scott Lahteine
4b6fa1b54d Move G29 3-point startup earlier 2021-04-29 08:45:08 -05:00
Scott Lahteine
284cc8f62d ExtUI homing / leveling additions 2021-04-29 08:45:08 -05:00
Scott Lahteine
ef35fc60c1 Use 'nearby' for 'near' 2021-04-29 08:45:08 -05:00
Scott Lahteine
ec2843bcf3 Creality 4.5.2 format and fix 2021-04-29 08:45:08 -05:00
LinFor
8a18bb8440 Fix FYSETC S6 I2C EEPROM size (#20340) 
Both V1.2 and V2.0 boards have a 24LC16, which is a 2kB EEPROM.

Co-authored-by: PingWin <kirill@shashlov.ru>
Co-authored-by: Jason Smith <jason.inet@gmail.com>
 2021-04-29 08:45:08 -05:00
InsanityAutomation
21b15a0a09 Add Creality 4.5.2 board (#20378) 
Co-authored-by: Jason Smith <jason.inet@gmail.com>
 2021-04-29 08:45:08 -05:00
Jason Smith
c400c54b86 Suspend Servos for STM32+NeoPixel (#19963) 2021-04-29 08:45:08 -05:00
Jason Smith
1a618b1b31 Fix TMC_HOME_PHASE divide by zero (#20368) 2021-04-29 08:45:08 -05:00
Scott Lahteine
a09d096b87 Improved Longer3D LKx Pro board (#20372) 
Co-authored-by: mrv96 <marione96@live.it>
 2021-04-29 08:45:08 -05:00
Tanguy Pruvot
c88a7935d6 Don’t use near keyword as variable name (#20374) 2021-04-29 08:45:08 -05:00
Belin Fieldson
43bbf04764 Loosen E on pause for fila-manipulation (#20346) 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
 2021-04-29 08:45:08 -05:00
Jason Smith
10b8737c7d Fix MESH_BED_LEVELING w/o SEGMENT_LEVELED_MOVES (#20363) 2021-04-29 08:45:08 -05:00
Scott Lahteine
20ea00e7f6 Consolidate common pin includes 2021-04-29 08:45:08 -05:00
ellensp
6a8ab8f1e6 Fix up start, monitor baud (#20326) 2021-04-29 08:45:08 -05:00
yysh12
eba2937715 Fix circle arc condition (#20322) 2021-04-29 08:45:08 -05:00
Jason Smith
07954edadc Permit SD EEPROM emulation on E3V2 (#20353) 2021-04-29 08:45:08 -05:00