MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
11,710 Commits 1 Branch 0 Tags 129 MiB
e1587da228
Commit Graph

9899 Commits

Author SHA1 Message Date
Scott Lahteine
159d7eefda New boards entry for the A20M 2019-01-28 21:08:20 -06:00
Scott Lahteine
97da6c1da5 Use MIN/MAX for min/max 2019-01-28 20:36:13 -06:00
Scott Lahteine
17a8c37148 Label menu edit items 2019-01-28 20:20:46 -06:00
raTmole
ddeca7a358 Fix resume from power loss G-Code. (#13035) 2019-01-28 13:19:26 -06:00
Thomas Moore
02ab66fca3 Update Cohesion3D Pins Files (#13027) 2019-01-27 23:11:33 -06:00
Giuliano Zaro
a79d80c78e Minor cleanup of pause code (#13030) 2019-01-27 23:10:25 -06:00
jeffstaley
0da636e1a3 Set correct stepper direction on reset (#13032) 
On a reset steppers were being initialized to incorrect direction. Original code wasn't respecting `INVERT_Z_DIR` define.
 2019-01-27 23:02:38 -06:00
Scott Lahteine
3845baf398 Followup to #12982 2019-01-27 22:53:46 -06:00
InsanityAutomation
48a3502656 Remote streamer improvements (#12982) 2019-01-27 22:43:13 -06:00
Scott Lahteine
621fbe99de Followup to #12817 2019-01-27 20:48:58 -06:00
Marcio Teixeira
f214118e45 Action to notify host of filament runout. (#12817) 2019-01-27 20:18:05 -06:00
Scott Lahteine
aad770bce8 Bring default configs in sync 2019-01-26 16:44:42 -06:00
jeffstaley
3f91233f6d
M29 logic was reversed 
If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"
 2019-01-25 07:36:52 -08:00
jeffstaley
0e0cc13650 Fix M29 for Pronterface SD card upload (#13010) 2019-01-24 21:10:59 -06:00
Jiri
24fffb8d93 Fix undefined lcd_tmpfan_speed on NO_LCD_MENUS (#13006) 2019-01-24 16:34:40 -06:00
Scott Lahteine
8f9b246d0e Tweak some formatting, replace tabs 2019-01-24 13:18:56 -06:00
Bo Herrmannsen
808df82b36 Support for Anycubic I3 (#12972) 2019-01-24 12:40:49 -06:00
Scott Lahteine
ae91914260 Prevent name conflicts with mixed stepper drivers 2019-01-24 01:25:28 -06:00
Scott Lahteine
0eca236dcd Fix L6470 config comments 2019-01-24 00:58:16 -06:00
InsanityAutomation
f4d1f13358 Warn on cold extrusion, dont error 2019-01-24 00:16:14 -06:00
Scott Lahteine
aa74a900f5 Bring Rostock 301 and ArmEd configs up to date 2019-01-23 23:37:37 -06:00
Scott Lahteine
0f07ba4f09 Tweak some comments 2019-01-23 20:18:13 -06:00
Scott Lahteine
00cdd41b5f Clean up for recent changes 2019-01-23 20:08:58 -06:00
Roman Moravčík
7d53b79596 Update Slovak translation (#12991) 2019-01-23 19:48:16 -06:00
Giuliano Zaro
18c32996c1 [2.0.x] Updated Italian language (#12997) 2019-01-23 19:35:42 -06:00
Bob Kuhn
7c1a5e3c47 Fix TEMP_TIMER in pins_STEVAL.h (#12994) 2019-01-23 19:34:39 -06:00
Scott Lahteine
b4994ad12e Update language_it.h 2019-01-23 19:28:57 -06:00
Bob Kuhn
2f35747f29 L6470 SPI daisy chain support (#12895) 2019-01-23 19:06:54 -06:00
Scott Lahteine
6453b82a5e Clean up trailing whitespace 2019-01-23 15:57:01 -06:00
Scott Lahteine
48a581ba2e Tweak some HAL Due code 2019-01-23 00:53:20 -06:00
Marcio Teixeira
54fdf57b8c ExtUI: Fix fan wrapping around from 0 to 100 (#12987) 2019-01-22 23:33:10 -06:00
InsanityAutomation
dbe4126e07 Update language_en.h (#12988) 2019-01-22 23:32:01 -06:00
teemuatlut
e5801b75f8 Fix TMC-related compile issues. (#12971) 
- `STEALTHOP_[XYZE]` configuration options now set the default state.
 2019-01-20 23:54:57 -06:00
Gert-Jan Rodenburg
bb30927549 Fix pins for ZONESTAR_LCD with Zonestar ZRIB (#12956) 2019-01-20 23:52:51 -06:00
Ludy
dc65d96aca Fix TMC compile error (#12965) 2019-01-20 23:47:28 -06:00
InsanityAutomation
a1cf49935d Add laser control menu (#12883) 2019-01-20 23:41:47 -06:00
InsanityAutomation
75f2665f2e LCD SD Card items near top when not using wheel (#12926) 2019-01-20 23:24:53 -06:00
Scott Lahteine
e1f951813a Remove old block end comment 2019-01-20 02:30:03 -06:00
Scott Lahteine
52108192d1 Prevent L6470 class name conflict with drivers.h define 
Fix #12824
 2019-01-20 00:32:56 -06:00
Scott Lahteine
0495fcd475 Minor spacing fix 2019-01-20 00:10:50 -06:00
lanserge
c2cf8ffa82 Add support for Arduino DUE Shield Kit (#12950) 2019-01-19 23:43:32 -06:00
Scott Lahteine
4e5a915ef8 Fix some Makefile comments 2019-01-19 23:41:30 -06:00
Scott Lahteine
a5911765c3 Tweak some spacing 2019-01-19 20:27:57 -06:00
chrisly42
99e5e8362f Rapide Lite 200 config, pins_RL200 RUMBA clone (#12848) 2019-01-19 20:19:14 -06:00
Scott Lahteine
6411680364 Update some pins spacing 2019-01-19 19:21:52 -06:00
teemuatlut
8a3f1d6932 Fix chopper timing struct and initialization (#12943) 2019-01-19 18:57:02 -06:00
Ludy
c6991109b7 Update German language (#12953) 2019-01-19 18:50:24 -06:00
Giuliano Zaro
ca9eb14f6a Update Italian language (#12951) 2019-01-19 18:48:13 -06:00
Ludy
acf266fe78 Fix a compile warning, etc. (#12955) 2019-01-19 18:47:29 -06:00
Scott Lahteine
424aa05cc2 Fix some file endings 2019-01-19 18:19:12 -06:00
Scott Lahteine
ce563d7c2e Various general cleanups 
Mostly from the L6470-oriented PR
 2019-01-19 16:56:12 -06:00
Scott Lahteine
02cc63d6d4 Update CreatorPro Configuration_adv.h 2019-01-19 16:37:50 -06:00
Marcio Teixeira
f4c16e683b Follow up fixes to #12884 (#12940) 2019-01-17 18:48:29 -06:00
Scott Lahteine
712e23c383 Fix up some whitespace 2019-01-17 18:05:36 -06:00
Ziemowit
20c20dacb7 MKS SBASE needs DRV8825 (#12911) 2019-01-17 13:21:53 -06:00
Giuliano Zaro
7bb5d4bfe8 Small LED code reorganization (#12929) 2019-01-17 13:20:26 -06:00
teemuatlut
e6805582a6 M569 to change stepping mode. Add new TMC section to LCD. (#12884) 2019-01-17 13:17:16 -06:00
Bob Kuhn
d08f27e27b Add support for STEVAL 3DP001V1 (#12894) 2019-01-15 18:59:36 -06:00
Alain Martel
cdb562d558 Bring Migbot config up to date (#12916) 2019-01-15 18:53:07 -06:00
Giuliano Zaro
8f4c6e6d1a Fix case light on boot (#12919) 2019-01-15 18:50:56 -06:00
Marcio Teixeira
f11c6d5d02 Fix M107 when dual-nozzles share fan (#12819) (#12909) 2019-01-15 18:45:18 -06:00
Karl Andersson
64a4649290 STM32 - Fix SD write (#12897) 2019-01-15 18:44:22 -06:00
Ludy
294521439e Clean up Configuration_adv.h (#12900) 2019-01-15 18:42:10 -06:00
InsanityAutomation
59b18aaeef Allow resume from pause with parking enabled (#12893) 
Currently, Pause of an SD-Memory card print does not work.    This has been verified to resolve the issue by multiple people.   

I understand more work needs to be done to resolve some of the concerns...
 2019-01-15 07:58:54 -07:00
Giuliano Zaro
85f149befe Save some progmem (#12913) 2019-01-14 20:56:30 -06:00
mikeshub
7fde8d9d1e Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855) 
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
 2019-01-14 14:29:55 -06:00
Scott Lahteine
3644c940bf Tweak SD section of Main Menu 2019-01-13 18:00:07 -06:00
teemuatlut
1a79878dff Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN 2019-01-12 18:07:28 -06:00
Scott Lahteine
7cfce20cd3 Update comments on M125 2019-01-12 17:52:44 -06:00
Jason
dc4786a504 Config files for PowerWASP Printer (#12889) 2019-01-12 16:57:45 -06:00
Scott Lahteine
3e867008f0 Fix some HAL_STM32F1 type declarations 2019-01-12 16:21:11 -06:00
Scott Lahteine
eb78aed863
Rename LCD menus according to variable types (#12892) 2019-01-12 16:01:04 -06:00
InsanityAutomation
ed3ab5e212 Fix M24 not starting new job (#12887) 2019-01-12 15:30:44 -06:00
Nils Hasenbanck
f9299c4461 Make timer definition in pin files for STM32 possible (#12874) 
RemRam needs to redefine a particular timer to work correctly. The HAL did foresee this possibility and checks if the timer was already defined for either the stepper or temperature timer.

Prior to this commit the header file for the timers couldn't see those definitions in the pin file, but this commit will fix this.

Tested on an actual hardware to verify. (It wouldn't boot without it.)
 2019-01-12 14:40:49 -06:00
InsanityAutomation
082f6a27de ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853) 2019-01-12 00:41:48 -06:00
Scott Lahteine
459f4fef60 Fix Temperature::init bug with HEATER_4_PIN 2019-01-11 22:54:26 -06:00
InsanityAutomation
a403d9a50c Improve menu pause / resume (#12876) 2019-01-11 20:42:11 -06:00
Alain Martel
432c21456f Add 3DFabXYZ Migbot example config (#12775) 
Co-Authored-By: Alain Martel <alain74martel@gmail.com>
 2019-01-11 20:41:20 -06:00
Scott Lahteine
fb8111553e getStatus => report_status 2019-01-11 19:51:00 -06:00
Chris Pepper
2919f3045d [LPC176x] Update PIO extrascript (#12878) 2019-01-11 19:45:33 -06:00
Scott Lahteine
19fea772e5 Use E_AXIS_N where it makes sense 2019-01-11 19:42:34 -06:00
Scott Lahteine
0d30ccf767 Tweaks to TMC26XStepper 2019-01-11 19:42:34 -06:00
HackingGulliver
1fd8e2c649 Fix: Junction Deviation calculates wrong cos(theta) on CoreXY (#12879) 2019-01-11 19:25:48 -06:00
Scott Lahteine
b402040059 Split bed size sanity check into two 2019-01-11 15:49:57 -06:00
Chris Barr
1d33784bf9 Add RUMBA32 Board (#12856) 2019-01-10 19:34:31 -06:00
Ondřej Nový
a0ef6198ff Level bed corners Z-hop height option (#12858) 2019-01-10 19:15:17 -06:00
Karl Andersson
8ae6f1e556 Fix errors and some compiler warnings with HAL_STM32 PlatformIO build (#12869) 2019-01-10 19:01:31 -06:00
Scott Lahteine
e6484d9dab Return to status when SD card is removed 2019-01-10 15:43:31 -06:00
Scott Lahteine
5f2d75f45b Move PINS_DEBUGGING to @section develop 2019-01-08 20:05:05 -06:00
Scott Lahteine
da42f27c9e Use maths macros for ceil/floor 2019-01-05 21:21:02 -06:00
Ludy
de4561c980 VORON Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12822) 2019-01-05 14:12:05 -06:00
Giuliano Zaro
709a6356f7 Remove obsolete test conditions (#12829) 2019-01-05 14:02:45 -06:00
Luu Lac
bcf347403b Fix M106 extruder & fan count (#12820) 2019-01-05 14:01:35 -06:00
Kaushik Vemparala
ba7e35cbab Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12774) 2019-01-04 19:30:08 -06:00
jmz52
d372e7e477 SDIO support for STM32F1 (#12782) 2019-01-04 13:38:07 -06:00
Marcio Teixeira
6a8fb0f25f Simplify backlash compensation code. (#12813) 
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
 2019-01-04 13:30:56 -06:00
luxflow
7f244f9b9c Update LPC SD pins for BIQU SKR (#12767) 
(Exactly matching the Azteeg X5 MINI Wifi)
 2019-01-03 10:44:00 -06:00
jmz52
813a4ea107 Add support for Mks Robin TFT display (#12706) 
* Add support for MKS Robin TFT display

- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
 2019-01-03 10:38:39 -06:00
jmz52
c4237b529f Fix MKS Mini and SD card conflct over SPI mode (#12783) 2019-01-03 10:27:53 -06:00
Phr3d13
01f75591c6 Fix GTM32_PRO_VB Serial and HAL via watchdog (#12753) 
Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.
 2019-01-03 09:46:49 -06:00