MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
14,342 Commits 1 Branch 0 Tags 129 MiB
e7e9304819
Commit Graph

117 Commits

Author SHA1 Message Date
Scott Lahteine
adb6334ba0 Use "dist" instead of "delta" for clarity 2020-03-25 19:18:42 -05:00
Scott Lahteine
118bd2f8b2
Apply loop shorthand macros (#17159) 2020-03-13 23:18:16 -05:00
Scott Lahteine
3a07b4412d
Asynchronous M114 and (R)ealtime position option (#17032) 2020-03-02 21:52:53 -06:00
Scott Lahteine
0b984519c3
Clean up stepper and babystep (#16857) 2020-02-14 05:14:37 -06:00
Scott Lahteine
bfad23d3e2 (c) 2020 2020-02-03 08:00:57 -06:00
Scott Lahteine
7f9c62437e
Corner Leveling: Add inset for each side (#16759) 2020-02-03 00:00:35 -06:00
Dirk O. Kaar
d0e1166cce Fix Visual Micro "Arduino IDE for Visual Studio" support (#16418) 2020-01-02 19:01:38 -06:00
Scott Lahteine
7a342ecb93
Show Total E during print (#15703) 2019-10-27 17:49:27 -05:00
Scott Lahteine
b7b303f4bf
Spindle/Laser power in planner blocks (#14437) 2019-10-15 16:10:20 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default (#15481) 2019-10-08 19:42:18 -05:00
Scott Lahteine
1df6c7a46c Work around a compiler bug 
See #15478
 2019-10-08 19:27:03 -05:00
InsanityAutomation
438835f6a5 Configurable Max Accel, Max Feedrate, Max Jerk edit limits (#13929) 2019-10-01 19:59:48 -05:00
Scott Lahteine
e3fd0519b3 Reduce need for UNUSED 2019-09-30 22:56:22 -05:00
Scott Lahteine
50e4545255
Add custom types for position (#15204) 2019-09-29 04:25:39 -05:00
Scott Lahteine
455dabb183
Add a feedRate_t data type (#15349) 2019-09-26 01:28:09 -05:00
Scott Lahteine
ee7558a622 Tweaks to Z fade behavior 2019-09-26 01:15:47 -05:00
Scott Lahteine
465c6d9230
Simpler Allen Key config. Fixes, cleanups from refactor (#15256) 2019-09-14 03:05:10 -05:00
Scott Lahteine
c590e8ac05
Improve Power-loss Recovery (#15135) 2019-09-10 18:52:41 -05:00
Scott Lahteine
75927e17dd
Filament Width Sensor singleton (#15191) 2019-09-10 18:48:58 -05:00
Scott Lahteine
584c86bed1
More "zero extruders" changes (#15213) 2019-09-10 02:20:49 -05:00
InsanityAutomation
b7796bcce6 Disable steppers on M112 (#15065) 
And change verbiage to not refer to "Emergency Stop."
 2019-08-28 00:51:01 -05:00
AnHardt
587d4a6373 Repair display throttling (#14960) 2019-08-16 21:17:09 -05:00
Scott Lahteine
eae543adf3 Apply HAS_SPI_LCD as needed 2019-07-29 18:55:05 -05:00
Scott Lahteine
750a16ad38 Fix MIN/MAX function collision with macros 2019-07-05 18:14:02 -05:00
Scott Lahteine
93cd66ac11 Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
Scott Lahteine
4c872a01f2
G-code queue singleton, front injection (#14236) 2019-06-19 00:00:19 -05:00
Scott Lahteine
0ca2073625 ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT 2019-06-10 17:28:35 -05:00
Scott Lahteine
ad4ffa1d2f
Use C++ language supported 'nullptr' (#13944) 2019-05-09 11:45:55 -05:00
Marcio Teixeira
15357af67c Backlash cleanup (#13659) 
…And save backlash, fil. sensor, ExtUI userdata to EEPROM.
 2019-05-03 23:53:15 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros (#13419) 
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
 2019-03-16 23:43:06 -05:00
Scott Lahteine
0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Scott Lahteine
6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022) 2019-02-10 04:54:23 -06:00
Scott Lahteine
a5e3384691 Pre-apply cosmetic changes to mixing 2019-02-03 01:09:14 -06:00
Scott Lahteine
19fea772e5 Use E_AXIS_N where it makes sense 2019-01-11 19:42:34 -06:00
Marcio Teixeira
6a8fb0f25f Simplify backlash compensation code. (#12813) 
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
 2019-01-04 13:30:56 -06:00
Marcio Teixeira
b22716e938 M425 Backlash Correction (#11061) 2018-12-08 14:36:46 -06:00
Jacob Jordan
8be91677df Fix Skew factors (#12555) 
- Ensure Skew factors are calculated from test square measurements
 2018-11-29 11:39:31 -06:00
Marcio Teixeira
056561df93 [2.0.x] Enhancements to FILAMENT_RUNOUT_SENSOR (#12069) 
- Added FILAMENT_RUNOUT_DISTANCE_MM option
- Added FILAMENT_MOTION_SENSOR option
 2018-10-16 07:28:52 -05:00
AnHardt
f56968ba0b New Continuous Filament Mixer (#12098) 2018-10-16 03:38:57 -05:00
Scott Lahteine
d556dc1865
Fix and improve EEPROM storage (#12054) 
* Clean up Temperature PID
* Improve EEPROM read/write/validate
* Group `SINGLENOZZLE` saved settings
* Group planner saved settings
* Group filament change saved settings
* Group skew saved settings
* Group `FWRETRACT` saved settings
 2018-10-10 09:45:20 -05:00
Scott Lahteine
d6b0fbd771
Use uint8_t for all fan speeds (#12032) 2018-10-07 15:34:41 -05:00
Scott Lahteine
c5e5cc5e9f Fix some trailing whitespace, macros 2018-09-17 17:30:04 -05:00
Thomas Moore
c437bb08f1 Overhaul of the planner (#11578) 
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
 2018-09-16 21:24:15 -05:00
Scott Lahteine
d882717d98
Save some PROGMEM with constexpr (#11798) 
When possible, make `active_extruder` a `constexpr` to save some PROGMEM.
 2018-09-10 23:09:26 -05:00
Sam Lane
4f883d5971 [2.0.x] Extruder-Distinct Linear Advance K Factors (#11789) 2018-09-10 22:37:32 -05:00
Scott Lahteine
a4b0148365 Easier to find 'static inline' 2018-08-13 23:55:33 -05:00
etagle
1367df2875 Replace double with float, optimize calculation 2018-07-04 22:28:56 -05:00
Scott Lahteine
8eaac0dab3
Add delta feedrate scaling (#11153) 2018-06-30 13:44:27 -05:00
Scott Lahteine
bd7f5848f1
Remove JUNCTION_DEVIATION_INCLUDE_E option (#11147) 2018-06-29 22:42:05 -05:00
Eduardo José Tagle
edb21f349a Fix stepper/planner block handling, race conditions (#11098) 
- Allow planner to alter the deceleration phase of the currently executing block.
- Remove BUSY flag, as it is NON ATOMIC to set bits in the Stepper ISR and Planner at the same time.
 2018-06-27 18:11:16 -05:00