Commit Graph

2733 Commits

Author SHA1 Message Date
Scott Lahteine
15a00a5a7c Add 1µs delay in other appropriate spots 2015-01-23 03:24:45 -08:00
AnHardt
23cb899c5a removed function step_wait() from stepper.cpp
removed function step_wait() from stepper.cpp because its used nowhere.
2015-01-21 16:30:45 +01:00
Scott Lahteine
d9d4a78e0f Add proper delay in stepper.cpp
Issue #1385 describes a delay that the compiler is optimizing out and
this solution.
2015-01-21 01:51:29 -08:00
CONSULitAS
d1322dafc9 Add: Example Configuration for Vellemann K8200 - based on new BOARD_K8200 #1391
# Add: Example Configuration for Vellemann K8200 - based on new
BOARD_K8200 #1391

* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag http://reprap.org/wiki/3drag, too. Please
report)
* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters form genuine Vellemann Firmware "firmware_k8200_marlinv2"
based on the recent development branch

I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows (SD library added to IDE manually) - everything works well
2015-01-20 23:13:44 +01:00
CONSULitAS
3b50a5e2e6 Add: Board for Vellemann K8200 (derived from 3Drag)
## Add: Board for Vellemann K8200 (derived from 3Drag)

* Boards.h: updated comment for board 3Drag - K8200 removed
* Boards.h: added `BOARD_K8200` with ID 78

* language.h.: machine name and firmware URL for new board

* pins.h: added `K8200` to any `#if` with `3Drag` and corresponding
comments
2015-01-20 20:46:20 +01:00
Michael Neumann
2d454da3af Update ConfigurationStore.cpp
Show Custom M Code when entering M503
2015-01-20 16:21:44 +01:00
Scott Lahteine
4f35de991a Merge pull request #1383 from CONSULitAS/Development
Update Boards.h for Vellemann K8200 - comment only
2015-01-19 15:59:38 -08:00
Scott Lahteine
91f7cc2e6d Merge pull request #1380 from chertykov/Development
Remove hardcoded programmer option (-cwiring).
2015-01-19 15:43:14 -08:00
roglio
22571ca13d Revert "Configuration for Aurora Z605"
This reverts commit 935ee968a7.
2015-01-19 15:02:11 +01:00
roglio
935ee968a7 Configuration for Aurora Z605
Still not fine tuned but working.
2015-01-19 11:18:52 +01:00
roglio
ccdbeda526 Fixing a build error for melzi and gfx display
When a melzi board and a full gfx are both selected, the build fails
blaming for some missing defines.

This is a fix for the issue: now my configuration works.
2015-01-19 10:43:26 +01:00
CONSULitAS
e13f159343 Update Boards.h for Vellemann K8200 - comment only
## Update Boards.h for Vellemann K8200 - comment only

* Boards.h: updated comment for board 3Drag - K8200 uses same board
2015-01-19 00:53:17 +01:00
CONSULitAS
51c7f2fd5a Revert "## Add: Example Configuration for Vellemann K8200"
This reverts commit 5333590ac2.
2015-01-19 00:37:57 +01:00
CONSULitAS
5333590ac2 ## Add: Example Configuration for Vellemann K8200
* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag too, please report)

* K8200/language.h: updated machine name and URL for K8200

* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters
form genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the
recent development branch

* K8200/files by Vellemann: added folder with original files from
Vellemann homepage, since there is no GitHub fork you could link to by
them

I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows - everything works well
2015-01-19 00:28:55 +01:00
Denis Chertykov
ba3ac40b9d Remove hardcoded programmer option (-cwiring). Use variable AVRDUDE_PROGRAMMER.
Change default value of AVRDUDE_PROGRAMMER to 'wiring'.
2015-01-18 20:18:43 +03:00
daid
993bcd370f Merge pull request #1373 from MarlinFirmware/revert-1350-Development
Revert "Reduce PROGMEM warnings"
2015-01-16 16:48:41 +01:00
daid
53f971095d Revert "Reduce PROGMEM warnings" 2015-01-16 16:48:22 +01:00
Bo Herrmannsen
5c7e38478b Merge pull request #1369 from PxT/patch-1
Update printrboard pin assignments
2015-01-16 15:35:42 +01:00
PxT
67b597ad46 Update printrboard pin assignments
Backported from Printrbot branch, allows the fan to work correctly.
2015-01-15 19:48:40 -08:00
Bo Herrmannsen
88fe6777bf Update README.md 2015-01-16 04:29:12 +01:00
galexander1
1a2f796dc7 Merge pull request #1368 from MarlinFirmware/revert-1357-SDlib
Revert "Move Sd library out into library"
2015-01-15 18:52:44 -05:00
galexander1
d4880a9e60 Revert "Move Sd library out into library" 2015-01-15 18:52:10 -05:00
Bo Herrmannsen
ccdb086fc8 Merge pull request #1363 from PxT/patch-1
Fixes #1361
2015-01-15 10:57:44 +01:00
Bo Herrmannsen
5151db5c2f Merge pull request #1349 from msutas/patch-2
Improvement - G29 Option for Not Retracting Servo
2015-01-15 10:56:31 +01:00
Bo Herrmannsen
1746b2582b Merge pull request #1332 from Sniffle/Development
Rambo FAN_PIN documentation and servo support
2015-01-15 10:56:17 +01:00
Bo Herrmannsen
4b51b5a46d Merge pull request #1357 from odewdney/SDlib
Move Sd library out into library
2015-01-15 10:56:07 +01:00
Bo Herrmannsen
f2cb4a3655 Merge pull request #1353 from thawkins/Development
fix avrdude upload in makefile
2015-01-15 10:55:33 +01:00
Bo Herrmannsen
2d398393bd Merge pull request #1359 from PxT/patch-2
Update GCodes.md
2015-01-15 10:54:44 +01:00
PxT
9fd4292923 Fixes #1361 2015-01-13 10:59:50 -08:00
PxT
d4c8cfe1f2 Update GCodes.md
Removed remaining angle brackets which are not displayed properly in Github-flavored Markdown.
2015-01-13 09:23:13 -08:00
odewdney
cf50c0eff8 Arduino.h case sensitive include 2015-01-13 14:30:28 +00:00
odewdney
abdb974d7f Changed dir sep from windows to unix 2015-01-13 14:22:57 +00:00
odewdney
db3b4d0c98 Add library to build 2015-01-13 14:19:20 +00:00
odewdney
f84ff4ba7d Move SD Fat library out of main src 2015-01-13 13:31:55 +00:00
Bo Herrmannsen
ab074dac17 Merge pull request #1344 from grob6000/independent_pid
Independent PID parameters for each extruder
2015-01-13 12:10:37 +01:00
Bo Herrmannsen
d4a665694a Merge pull request #1350 from odewdney/Development
Reduce PROGMEM warnings
2015-01-13 11:26:50 +01:00
Bo Herrmannsen
b6623a0d49 Merge pull request #1351 from PxT/patch-1
Update GCodes.md
2015-01-13 11:26:24 +01:00
odewdney
9d9c859ac1 First move of SdFat library 2015-01-13 08:04:32 +00:00
Tim Hawkins
5045d17a39 fix avrdude upload in makefile 2015-01-13 13:01:43 +08:00
PxT
848475a5b0 Update GCodes.md
Sort Gcodes numerically, other minor formatting changes
2015-01-12 13:28:31 -08:00
msutas
3a5a6f42fb Corrected the ABL grid option
G29 E was not retracting the probe on the last probe point when used with ABL grid. Corrected.
2015-01-12 11:07:46 +02:00
odewdney
cd55a93a13 re-add blank line 2015-01-11 19:22:35 +00:00
odewdney
23bfe30036 moved include themister to temperature.c 2015-01-11 18:18:32 +00:00
odewdney
538859669d Removing compiler warnings for progmem 2015-01-11 18:14:21 +00:00
Bo Herrmannsen
46843bd927 adding back notes on servo power 2015-01-11 14:18:38 +01:00
Bo Herrmannsen
d9cd8e9e69 starting to add back note on ramps servo power 2015-01-11 14:16:33 +01:00
grob6000
bf2c923db5 Make multiple PID parameters a config option
* Adds config parameter `PID_PARAMS_PER_EXTRUDER` - allows single PID
parameters to be used where this would be preferable (e.g. dual
identical extruders)
* When disabled, will use `float Kp, Ki, Kd, Kc;` as before.
Preprocessor macros used to switch between.
* ultralcd.cpp defines extra menus for extra parameters only where
required
* M301 reports `e:xx` only if independent pid parameters enabled
* EEPROM structure still leaves space for 3 extruders worth, when undef
will save single parameter to all extruder positions, but only read the
first
* Switching off saves approx 330 B with no LCD enabled, 2634B with LCD
(RRD) enabled: this is significant.
* LCD modifications should be tested.
2015-01-11 13:50:17 +11:00
grob6000
0877aa0fe0 Merge remote-tracking branch 'upstream/Development' into independent_pid 2015-01-11 11:32:58 +11:00
msutas
e0beb98fd3 Improvement - G29 Option for Not Retracting Servo
This change introduces an improvement to G29 command on Marlin.

Auto bed leveling operation's reliability is based on the repeatability of the Z-probe switch and the servo. This change introduces an option to G29 command. When the G29 command is sent with an "e" option, during auto bed levelling the servo is not retracted between probes which decreases the bias on auto bed levelling resulting from servo.

G29 command does the auto bed probing as it is.

G29 E command engages the servo on first probing point, probes all points and retracts the servo after probing the last point.

Please comment your opinions, test on your printer and check the code on a programmer's perspective. (I am not a good programmer.)
2015-01-10 17:25:39 +02:00
Bo Herrmannsen
1d4af46496 Merge pull request #1348 from stv0g/LogoLCD
Adding new Marlin to splash screen
2015-01-10 16:08:03 +01:00