Commit Graph

2013 Commits

Author SHA1 Message Date
Scott Lahteine
fc53e43de6 Don't test raw temp for MAX6675
- Remove test of raw temp for thermistor 0 when using MAX6675
- Longer `raw_temp_value` array for `TEMP_SENSOR_1_AS_REDUNDANT`
2015-03-23 20:55:48 -07:00
Scott Lahteine
03fa9fae9f Merge branch 'Development' into fix_temperature_minmax
Latest upstream commits
2015-03-23 20:42:48 -07:00
Scott Lahteine
1fac388664 Revert measurement loop 2015-03-23 15:18:22 -07:00
nicolas-rambaud
37cde8a191 Report changes from previous PR from old code base including :
I've updated the minimum values from the LCD.
It has been a while that i want to at least fix this.
I have an inductive probe and often i need to set my zOffset to something lower than 0.5.
With the current implementation, the default LCD value is set to 0.5 for some reason.
On my case i need to be able to set it down to 0.0 as my inductive probe can be lower than 0.5.
Before with the LCD we couldn't change this value below 0.5. We had to flash the firmware every time which was painful.
Now we are able to change this value down to 0.0 if needed.
I've also changed the minimum value for Z min acceleration.
In the default configuration it's set to 25 but on the LCD the minimum was 100 which is not coherent.
I've changes the minimum to 10. On this axis, depending on the mechanics/motor drivers we might require very low acceleration, so i guess 10 is somehow realistic.
2015-03-23 12:29:12 +01:00
Scott Lahteine
b26a3ea02c Merge pull request #1662 from josla972/refactor_scara
Refactor SCARA calibration. Save some lines of code and possibly ROM.
2015-03-23 00:51:18 -07:00
wurstnase
e6f6c6e3a1 fix bad insertion config again 2015-03-23 08:32:48 +01:00
Scott Lahteine
6bdee87be3 Cleanup temperature code
- Get rid of unused temp states in the ISR, resulting in more frequent
temperature reading with fewer sensors
- Shrink code slightly in min/max testing
2015-03-23 00:27:29 -07:00
Scott Lahteine
7717e1ce33 Fix bad insert in configuration 2015-03-22 21:48:46 -07:00
Scott Lahteine
146501215f Fix mangled probe_pt calls
- Address issue #1669
- Remove the TOPO_ORIGIN configuration setting
2015-03-22 21:45:20 -07:00
maverikou
15345cc249 Corrected Z_PROBE_ALLEN_KEY behaviour. 2015-03-22 13:54:51 +02:00
maverikou
0f034dd97e Clean up Z_RAISE_AFTER_PROBING to work the same in all code paths except Z_PROBE_SLED. 2015-03-22 13:54:45 +02:00
maverikou
6c96f32069 Blind fix for #1507 2015-03-22 13:54:21 +02:00
Josef Larsson
379348487e Removed malplaced comment. 2015-03-22 12:21:31 +01:00
Scott Lahteine
8bd6e37b21 Merge pull request #1661 from thinkyhead/G92_no_offset
Don't add home offsets in G29
2015-03-21 16:49:06 -07:00
Scott Lahteine
582cd780cd Fix compile error with *_DUAL_STEPPER_DRIVERS
- Patch up macros in stepper.cpp
2015-03-21 16:43:47 -07:00
Josef Larsson
9b3462f73f Refactor SCARA calibration. Save some lines of code and possibly ROM. 2015-03-22 00:37:24 +01:00
Scott Lahteine
691e753cc3 Don't add home offsets in G29
- Address #1262 by leaving values as set
- Rename `add_homing` to `home_offset`
2015-03-21 16:30:02 -07:00
Scott Lahteine
9b639b4135 Merge pull request #1619 from epatel/manual-bed-leveling+mesh-bed-level
Manual bed leveling + mesh bed leveling
2015-03-21 15:39:42 -07:00
Scott Lahteine
3703694e30 Fix temperature min/max test
- Base tests on all thermistors/thermocouples, not just heater 0
2015-03-21 14:23:43 -07:00
Edward Patel
3d0a060a7a Added G29 command 2015-03-21 14:50:47 +01:00
Edward Patel
c516747847 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-21 14:49:52 +01:00
AnHardt
64e3d33893 Fix shrinked menucode
by updating 'encoderPosition' in END_MENU() line 1.
2015-03-20 23:36:14 +01:00
Edward Patel
a7e89d4cfa Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-20 15:46:01 +01:00
Scott Lahteine
2176a22d42 Fix count_direction initializer
- Addressing #1625
2015-03-20 05:45:05 -07:00
Scott Lahteine
5644ad6809 Fix hiliting of edit items 2015-03-20 04:29:35 -07:00
Scott Lahteine
526a755a66 Merge pull request #1652 from AnHardt/PIDdebug
PID debug
2015-03-20 04:14:08 -07:00
Edward Patel
5112cf8422 Added comment for the EEPROM storage 2015-03-20 11:46:47 +01:00
Edward Patel
4619d80524 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-20 11:45:06 +01:00
Scott Lahteine
199151a4ed Merge pull request #1650 from AnHardt/beautify
Beautivy statusscreen
2015-03-20 03:38:02 -07:00
Scott Lahteine
2424713a8f Merge pull request #1640 from AnHardt/warning6
codepos not used in gcode_M28()
2015-03-20 02:58:00 -07:00
AnHardt
e85061d20d Added changes to the 'new' Configuration.h s 2015-03-20 10:36:29 +01:00
Edward Patel
a61f679568 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-20 02:28:35 +01:00
Edward Patel
c87faa69ed Shortened mesh_plan_buffer_line() 2015-03-20 02:18:49 +01:00
AnHardt
47c1ea72af Merge https://github.com/kieranc/Marlin into PIDdebug
Conflicts:
	Marlin/temperature.cpp

Cleaned merge conflict.

Codeposition had changed.
Variable pid_input had vanished.

Signed-off-by: AnHardt <github@kitelab.de>
2015-03-20 00:07:36 +01:00
AnHardt
f1d3d1524d Merge branch 'optimize_menu_code' of https://github.com/thinkyhead/Marlin into beautify
Conflicts:
	Marlin/dogm_lcd_implementation.h

solved merge conflict.
2015-03-19 22:51:22 +01:00
AnHardt
fa889cd6e1 Beautivy statusscreen
by shifting things some pixels around
2015-03-19 22:13:37 +01:00
Scott Lahteine
7279e4f82f Small code tweaks re lcd.print 2015-03-19 14:01:33 -07:00
Scott Lahteine
90ba61b9b8 Include indicator for new drawmenu_generic
In the new method we pass the character that should be used for
selected state, not the character to print always.
2015-03-19 13:49:06 -07:00
Scott Lahteine
15d29efad5 Pass sel to lcd_implementation_mark_as_selected
- Pass selected state directly to lcd_implementation_mark_as_selected
- Rename sel function parameter
- Include a minor fix for SdBaseFile.h
2015-03-19 13:40:36 -07:00
Scott Lahteine
a547dc2148 Merge branch 'Development' into optimize_menu_code
Get upstream changes
2015-03-19 13:31:37 -07:00
alexborro
e650d4044e Fix "Stop Print" function in the LCD menu
When one hit "Stop Print" option in LCD menu, the command buffer was not
cleared. The printer keep moving until the buffer has been emptied.
Actually I could not clear the command buffer as well.. I don't know
why, it doesnt work as expected.
I need to implement a routine inside Stepper ISR to handle such
situation.
2015-03-19 14:16:18 -03:00
AnHardt
ae01a6b5f2 Make use of codepos.
Saves one addition.
Needs one pointer on the stack.

Don't know if this is a go trade.
2015-03-19 09:45:16 +01:00
Scott Lahteine
a534ac197a Merge pull request #1621 from AnHardt/remove--6x9-font
Remove 6x9 font
2015-03-18 23:10:42 -07:00
Scott Lahteine
80e0ee10ca Merge pull request #1631 from AnHardt/iss1593
Decrease KILL_DELAY
2015-03-18 19:10:38 -07:00
Scott Lahteine
4ce79920e5 Merge pull request #1635 from AnHardt/warnings1
Negative times are unlikly
2015-03-18 19:10:12 -07:00
Scott Lahteine
76127b8a55 Merge pull request #1630 from Wurstnase/fix_g29
optional parameters must be named when ignoring order
2015-03-18 19:09:40 -07:00
Scott Lahteine
be3f2dc1d9 Merge pull request #1636 from AnHardt/warning2
lcd_control_retract_menu() is conditional.
2015-03-18 19:09:05 -07:00
Scott Lahteine
8d396584bf Merge pull request #1637 from AnHardt/warning3
lcd_autostart_sd() has two conditions.
2015-03-18 19:08:33 -07:00
Scott Lahteine
8664c6d465 Merge pull request #1638 from AnHardt/warning4
delta[3] not used when DELTA not defined.
2015-03-18 19:07:55 -07:00
Scott Lahteine
10711ccc6a Merge pull request #1639 from AnHardt/warning5
G4 could wait for an undefined time
2015-03-18 19:07:14 -07:00