Firmware2/Marlin/src/feature
2022-08-01 01:59:37 -05:00
..
adc Add M3426 A<addr> parameter (#24130) 2022-05-07 18:13:09 -05:00
bedlevel 🧑‍💻 Update planner/stepper includes 2022-08-01 01:59:37 -05:00
dac 🧑‍💻 Update planner/stepper includes 2022-08-01 01:59:37 -05:00
digipot 🧑‍💻 Allow DIGIPOT Rsx / Vrefmax override (#23885) 2022-05-07 15:58:31 -05:00
leds 🎨 Use LEDColor default C-CTOR 2022-05-07 18:27:56 -05:00
mmu 🎨 Fix spelling, whitespace 2022-06-05 21:11:27 -05:00
password 🧑‍💻 HAS_MARLINUI_MENU, HAS_MANUAL_MOVE_MENU 2022-05-07 15:38:55 -05:00
ammeter.cpp 🎨 Laser Ammeter followup (#22079) 2021-06-15 00:09:52 -05:00
ammeter.h 🎨 Laser Ammeter followup (#22079) 2021-06-15 00:09:52 -05:00
babystep.cpp
babystep.h 🧑‍💻 Remove extraneous 'inline' hints 2022-01-09 04:33:17 -06:00
backlash.cpp 🐛 Fix BACKLASH_COMPENSATION compile (#24072) 2022-06-05 23:11:31 -05:00
backlash.h 🐛 Fix backlash applied steps when config changes (#23826) 2022-05-07 15:58:30 -05:00
baricuda.cpp
baricuda.h
binary_stream.cpp
binary_stream.h 🎨 Fewer serial macros 2021-10-02 22:31:15 -05:00
bltouch.cpp 🧑‍💻 Remove servo macros 2022-06-13 04:32:49 -05:00
bltouch.h 🧑‍💻 Remove extraneous 'inline' hints 2022-01-09 04:33:17 -06:00
cancel_object.cpp 🎨 Apply F() to status message 2021-12-25 00:20:45 -06:00
cancel_object.h 🧑‍💻 Remove extraneous 'inline' hints 2022-01-09 04:33:17 -06:00
caselight.cpp ♻️ Refactor HAL as singleton (#23357, #23871, #23897) 2022-05-07 15:58:30 -05:00
caselight.h 🚸 Case Light, LED menus for E3V2 DWIN Enhanced UI (#23590) 2022-05-07 15:58:30 -05:00
closedloop.cpp 💡 Adjust headers, formatting 2021-10-02 22:31:16 -05:00
closedloop.h
controllerfan.cpp ♻️ Refactor HAL as singleton (#23357, #23871, #23897) 2022-05-07 15:58:30 -05:00
controllerfan.h 🧑‍💻 Remove extraneous 'inline' hints 2022-01-09 04:33:17 -06:00
cooler.cpp 🏗️ Allow headless Flow Meter (#22234) 2021-07-17 02:31:54 -05:00
cooler.h 🏗️ Allow headless Flow Meter (#22234) 2021-07-17 02:31:54 -05:00
direct_stepping.cpp 🎨 Misc. 'else' cleanup 2022-08-01 01:59:37 -05:00
direct_stepping.h 🧑‍💻 Misc. updates for extra axes (#23521) 2022-05-07 15:12:45 -05:00
e_parser.cpp
e_parser.h ♻️ Refactor HAL as singleton (#23357, #23871, #23897) 2022-05-07 15:58:30 -05:00
easythreed_ui.cpp 🎨 Misc. cleanup, comments 2022-05-07 15:10:19 -05:00
easythreed_ui.h EasyThreeD ET4000+ board and UI (#23080) 2021-12-25 03:23:09 -06:00
encoder_i2c.cpp 🏗️ Extend AXIS_CHAR to include E 2022-06-05 23:11:31 -05:00
encoder_i2c.h 🏗️ Extend AXIS_CHAR to include E 2022-06-05 23:11:31 -05:00
ethernet.cpp 🩹 Tweak startup message (#22633) 2021-09-12 19:18:23 -05:00
ethernet.h
fancheck.cpp 🧑‍💻 General and Axis-based bitfield flags (#23989) 2022-05-12 04:18:02 -05:00
fancheck.h 🧑‍💻 General and Axis-based bitfield flags (#23989) 2022-05-12 04:18:02 -05:00
fanmux.cpp
fanmux.h Remove extraneous 'extern' hints (#21516) 2021-04-02 14:22:43 -05:00
filwidth.cpp
filwidth.h 🐛 Use ADC_VREF for Filament Width ADC Vref (#23977) 2022-05-07 16:49:47 -05:00
fwretract.cpp 🧑‍💻 Update planner/stepper includes 2022-08-01 01:59:37 -05:00
fwretract.h 🧑‍💻 General and Axis-based bitfield flags (#23989) 2022-05-12 04:18:02 -05:00
host_actions.cpp 🧑‍💻 Drop hostui.flag 2022-05-07 15:54:55 -05:00
host_actions.h 🧑‍💻 Drop hostui.flag 2022-05-07 15:54:55 -05:00
hotend_idle.cpp 🎨 Apply F() to status message 2021-12-25 00:20:45 -06:00
hotend_idle.h
joystick.cpp ️ Optimize G2-G3 Arcs (#24366) 2022-07-15 18:48:15 -05:00
joystick.h 🎨 Check flags without ENABLED 2021-07-17 01:54:27 -05:00
max7219.cpp 🧑‍💻 Update planner/stepper includes 2022-08-01 01:59:37 -05:00
max7219.h 🚸 Vertical Max7219::quantity in portrait orientation (#24415) 2022-07-01 07:54:53 -05:00
meatpack.cpp 🎨 Fix spelling, whitespace 2022-06-05 21:11:27 -05:00
meatpack.h 🎨 Fix spelling, whitespace 2022-06-05 21:11:27 -05:00
mixing.cpp 🚸 Fix, extend X Axis Twist Compensation (#23745) 2022-05-07 15:58:31 -05:00
mixing.h 🧑‍💻 Remove extraneous 'inline' hints 2022-01-09 04:33:17 -06:00
pause.cpp 🧑‍💻 Update planner/stepper includes 2022-08-01 01:59:37 -05:00
pause.h 🚸 Use M600 for disabled MMU (#21865) 2021-12-25 01:52:31 -06:00
power_monitor.cpp 🩹 Remove poison wchar_t macro 2022-07-04 00:29:53 -05:00
power_monitor.h 🎨 Misc. shorthand operators 2022-06-26 10:02:36 -05:00
power.cpp 🧑‍💻 Update planner/stepper includes 2022-08-01 01:59:37 -05:00
power.h 🩹 Fix power.h compile (#23573) 2022-05-07 15:38:55 -05:00
powerloss.cpp Support for up to 9 axes (#23112, #24036, #24231) 2022-06-05 23:11:31 -05:00
powerloss.h 🧑‍💻 Handle PLR in manage_media 2022-05-07 18:40:42 -05:00
probe_temp_comp.cpp ️ Apply PTC on all probing (#23764) 2022-05-07 15:58:30 -05:00
probe_temp_comp.h ️ Apply PTC on all probing (#23764) 2022-05-07 15:58:30 -05:00
repeat.cpp 💡 Adjust headers, formatting 2021-10-02 22:31:16 -05:00
repeat.h 🧑‍💻 Remove extraneous 'inline' hints 2022-01-09 04:33:17 -06:00
runout.cpp 🔧 DWIN_CREALITY_LCD_ENHANCED => DWIN_LCD_PROUI 2022-05-07 15:58:31 -05:00
runout.h 🧑‍💻 Remove extraneous 'inline' hints 2022-01-09 04:33:17 -06:00
solenoid.cpp ✏️ Fix parking extruder compile (#23961) 2022-05-07 16:49:21 -05:00
solenoid.h 🩹 No PE_MAGNET_ON_STATE without PARKING_EXTRUDER 2022-05-07 16:00:49 -05:00
spindle_laser_types.h ️ Fix and improve Inline Laser Power (#22690) 2022-07-15 18:48:14 -05:00
spindle_laser.cpp ️ Fix and improve Inline Laser Power (#22690) 2022-07-15 18:48:14 -05:00
spindle_laser.h 🐛 Fix laser menu enable_state (#24557) 2022-08-01 01:59:37 -05:00
stepper_driver_safety.cpp Support for up to 9 axes (#23112, #24036, #24231) 2022-06-05 23:11:31 -05:00
stepper_driver_safety.h BTT SKR V2.0 / Stepper Driver Anti-Reverse Protection (#21503) 2021-04-27 02:22:09 -05:00
tmc_util.cpp 🧑‍💻 Update planner/stepper includes 2022-08-01 01:59:37 -05:00
tmc_util.h Support for up to 9 axes (#23112, #24036, #24231) 2022-06-05 23:11:31 -05:00
tramming.cpp
tramming.h 🎨 screws_tilt_adjust_pos => tramming_points 2021-09-12 19:30:05 -05:00
twibus.cpp 🐛 Fix TWIBus Wire.begin call (#23183) 2021-12-25 01:37:21 -06:00
twibus.h 🧑‍💻 Remove extraneous 'inline' hints 2022-01-09 04:33:17 -06:00
x_twist.cpp 🚸 Fix, extend X Axis Twist Compensation (#23745) 2022-05-07 15:58:31 -05:00
x_twist.h 🚸 Universal X_AXIS_TWIST_COMPENSATION (#23828) 2022-05-07 15:58:30 -05:00
z_stepper_align.cpp 💥 Num Axes / Multi-Stepper based on Driver Types (#24106, #24120) 2022-06-05 20:58:39 -05:00
z_stepper_align.h 💥 Num Axes / Multi-Stepper based on Driver Types (#24106, #24120) 2022-06-05 20:58:39 -05:00