MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
Firmware2/Marlin
History
Ian Jackson 1dba212e18 HOMEAXIS: make into a function 
Replace the large macro HOMEAXIS with a function.  This avoids the
compiler generating three copies of largely identical code.  The
saving is 724 bytes of program memory.

We make use of XYZ_CONSTS_FROM_CONFIG to provide convenient
array-shaped access to MAX_LENGTH, HOME_RETRACT_MM and HOME_DIR.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
2012-08-11 01:43:00 +01:00
..
Gen7
Fix cast warning in Gen7
2012-02-23 18:50:05 +01:00
hardware/tools/avr/etc
ATMega1284P support for Arduino IDE
2012-02-17 11:41:47 +01:00
Sanguino
Fixed compiler warning for Sanguino compile
2012-02-26 17:35:01 +01:00
cardreader.cpp
made prepare->autostart independent of current folder.
2012-03-19 20:24:40 +01:00
cardreader.h
__ header file replace
2012-06-02 20:44:17 +02:00
Configuration_adv.h
Support step motor controllers with active low step pins.
2012-06-29 16:27:47 +02:00
Configuration.h
Fixed soft limits when the origin is in the middle.
2012-07-14 22:24:26 +02:00
COPYING
first commit
2011-08-12 22:28:35 +02:00
create_speed_lookuptable.py
Added 20MHz support.
2012-03-11 12:25:04 +01:00
createTemperatureLookup.py
first commit
2011-08-12 22:28:35 +02:00
EEPROMwrite.h
__ header file replace
2012-06-02 20:44:17 +02:00
fastio.h
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2012-02-13 13:07:55 +01:00
language.h
added firmware retract. disabled by default
2012-06-02 20:32:28 +02:00
Makefile
Makefile: Better display of size (device memory usage)
2012-08-10 19:36:30 +01:00
Marlin.h
eeprom: provide smaller code for SERIAL_ECHOPAIR
2012-08-11 01:42:59 +01:00
Marlin.pde
HOMEAXIS: make into a function
2012-08-11 01:43:00 +01:00
MarlinSerial.cpp
Teensylu support.
2012-02-09 19:27:45 +01:00
MarlinSerial.h
Teensylu support.
2012-02-09 19:27:45 +01:00
motion_control.cpp
software_endstops: use *_MIN_POS and *_MAX_POS for arcs
2012-08-10 19:36:30 +01:00
motion_control.h
Removed interrupt nesting in the stepper ISR.
2011-11-27 21:12:55 +01:00
pins.h
Fixed soft limits when the origin is in the middle.
2012-07-14 22:24:26 +02:00
planner.cpp
Fixed AD595 define
2012-06-11 17:33:42 +02:00
planner.h
Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.
2012-05-09 08:05:13 +03:00
Sd2Card.cpp
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
2011-12-26 09:28:51 +01:00
Sd2Card.h
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
2011-12-26 09:28:51 +01:00
Sd2PinMap.h
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
2011-12-26 09:28:51 +01:00
SdBaseFile.cpp
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
2012-02-11 16:02:47 +01:00
SdBaseFile.h
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
2011-12-26 09:28:51 +01:00
SdFatConfig.h
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
2011-12-26 09:28:51 +01:00
SdFatStructs.h
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
2011-12-26 09:28:51 +01:00
SdFatUtil.cpp
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
2012-02-11 16:02:47 +01:00
SdFatUtil.h
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
2011-12-26 09:28:51 +01:00
SdFile.cpp
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
2011-12-26 09:28:51 +01:00
SdFile.h
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
2011-12-26 09:28:51 +01:00
SdInfo.h
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
2011-12-26 09:28:51 +01:00
SdVolume.cpp
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
2011-12-26 09:28:51 +01:00
SdVolume.h
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
2011-12-26 09:28:51 +01:00
speed_lookuptable.h
Added 20MHz support.
2012-03-11 12:25:04 +01:00
stepper.cpp
Fixed typo
2012-07-14 17:25:35 +03:00
stepper.h
merging
2011-12-12 20:35:46 +01:00
temperature.cpp
Limit PID autotune PWM to PID_MAX
2012-05-16 19:32:23 +02:00
temperature.h
Added support for 2nd extruder temperature to UltraLCD
2012-04-27 14:51:32 +02:00
thermistortables.h
Merge pull request #170 from linagee/Marlin_v1
2012-06-02 03:46:56 -07:00
ultralcd.h
__ header file replace
2012-06-02 20:44:17 +02:00
ultralcd.pde
Fixed AD595 define
2012-06-11 17:33:42 +02:00
watchdog.h
__ header file replace
2012-06-02 20:44:17 +02:00
watchdog.pde
simplified the includes, makefile now works with arduino23
2011-12-22 14:55:45 +01:00
wiring.h
add wiring.h, that can be used to overwrite:
2011-12-22 14:57:28 +01:00